提交 dcb4123c 编写于 作者: J Jon Cooper 提交者: David S. Miller

sfc: disable RSS when unsupported

When certain firmware variants are selected (via the sfboot utility) the
SFC7000 and SFC8000 series NICs don't support RSS. The driver still
tries (and fails) to insert filters with the RSS flag, and the NIC fails
to pass traffic.

When the firmware reports RSS_LIMITED suppress allocating a default RSS
context. The absence of an RSS context is picked up in filter insertion
and RSS flags are discarded.
Signed-off-by: NBert Kenward <bkenward@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 4be2b49e
......@@ -1920,6 +1920,10 @@ static int efx_ef10_alloc_rss_context(struct efx_nic *efx, u32 *context,
return 0;
}
if (nic_data->datapath_caps &
1 << MC_CMD_GET_CAPABILITIES_OUT_RX_RSS_LIMITED_LBN)
return -EOPNOTSUPP;
MCDI_SET_DWORD(inbuf, RSS_CONTEXT_ALLOC_IN_UPSTREAM_PORT_ID,
nic_data->vport_id);
MCDI_SET_DWORD(inbuf, RSS_CONTEXT_ALLOC_IN_TYPE, alloc_type);
......@@ -2923,9 +2927,16 @@ static void efx_ef10_filter_push_prep(struct efx_nic *efx,
bool replacing)
{
struct efx_ef10_nic_data *nic_data = efx->nic_data;
u32 flags = spec->flags;
memset(inbuf, 0, MC_CMD_FILTER_OP_IN_LEN);
/* Remove RSS flag if we don't have an RSS context. */
if (flags & EFX_FILTER_FLAG_RX_RSS &&
spec->rss_context == EFX_FILTER_RSS_CONTEXT_DEFAULT &&
nic_data->rx_rss_context == EFX_EF10_RSS_CONTEXT_INVALID)
flags &= ~EFX_FILTER_FLAG_RX_RSS;
if (replacing) {
MCDI_SET_DWORD(inbuf, FILTER_OP_IN_OP,
MC_CMD_FILTER_OP_IN_OP_REPLACE);
......@@ -2985,10 +2996,10 @@ static void efx_ef10_filter_push_prep(struct efx_nic *efx,
spec->dmaq_id == EFX_FILTER_RX_DMAQ_ID_DROP ?
0 : spec->dmaq_id);
MCDI_SET_DWORD(inbuf, FILTER_OP_IN_RX_MODE,
(spec->flags & EFX_FILTER_FLAG_RX_RSS) ?
(flags & EFX_FILTER_FLAG_RX_RSS) ?
MC_CMD_FILTER_OP_IN_RX_MODE_RSS :
MC_CMD_FILTER_OP_IN_RX_MODE_SIMPLE);
if (spec->flags & EFX_FILTER_FLAG_RX_RSS)
if (flags & EFX_FILTER_FLAG_RX_RSS)
MCDI_SET_DWORD(inbuf, FILTER_OP_IN_RX_CONTEXT,
spec->rss_context !=
EFX_FILTER_RSS_CONTEXT_DEFAULT ?
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册