提交 dc0fe58f 编写于 作者: D David S. Miller

Merge branch 'mvneta'

Thomas Petazzoni says:

====================
net: mvneta: fix usage as a module

The following set of two patches fix the usage of the mvneta driver
when built as a module, and used in RGMII configurations. It is
somewhat similar to a previous fix that was made by Arnaud Patard, but
which was limited to SGMII configurations.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <net/ip.h>
#include <net/ipv6.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_mdio.h>
......@@ -88,8 +89,9 @@
#define MVNETA_TX_IN_PRGRS BIT(1)
#define MVNETA_TX_FIFO_EMPTY BIT(8)
#define MVNETA_RX_MIN_FRAME_SIZE 0x247c
#define MVNETA_SGMII_SERDES_CFG 0x24A0
#define MVNETA_SERDES_CFG 0x24A0
#define MVNETA_SGMII_SERDES_PROTO 0x0cc7
#define MVNETA_RGMII_SERDES_PROTO 0x0667
#define MVNETA_TYPE_PRIO 0x24bc
#define MVNETA_FORCE_UNI BIT(21)
#define MVNETA_TXQ_CMD_1 0x24e4
......@@ -161,7 +163,7 @@
#define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
#define MVNETA_GMAC0_PORT_ENABLE BIT(0)
#define MVNETA_GMAC_CTRL_2 0x2c08
#define MVNETA_GMAC2_PSC_ENABLE BIT(3)
#define MVNETA_GMAC2_PCS_ENABLE BIT(3)
#define MVNETA_GMAC2_PORT_RGMII BIT(4)
#define MVNETA_GMAC2_PORT_RESET BIT(6)
#define MVNETA_GMAC_STATUS 0x2c10
......@@ -710,35 +712,6 @@ static void mvneta_rxq_bm_disable(struct mvneta_port *pp,
mvreg_write(pp, MVNETA_RXQ_CONFIG_REG(rxq->id), val);
}
/* Sets the RGMII Enable bit (RGMIIEn) in port MAC control register */
static void mvneta_gmac_rgmii_set(struct mvneta_port *pp, int enable)
{
u32 val;
val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
if (enable)
val |= MVNETA_GMAC2_PORT_RGMII;
else
val &= ~MVNETA_GMAC2_PORT_RGMII;
mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
}
/* Config SGMII port */
static void mvneta_port_sgmii_config(struct mvneta_port *pp)
{
u32 val;
val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
val |= MVNETA_GMAC2_PSC_ENABLE;
mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
mvreg_write(pp, MVNETA_SGMII_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
}
/* Start the Ethernet port RX and TX activity */
static void mvneta_port_up(struct mvneta_port *pp)
{
......@@ -2756,12 +2729,15 @@ static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
if (phy_mode == PHY_INTERFACE_MODE_SGMII)
mvneta_port_sgmii_config(pp);
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
else
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_RGMII_SERDES_PROTO);
val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
mvneta_gmac_rgmii_set(pp, 1);
val |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
/* Cancel Port Reset */
val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
val &= ~MVNETA_GMAC2_PORT_RESET;
mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
......@@ -2774,6 +2750,7 @@ static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
static int mvneta_probe(struct platform_device *pdev)
{
const struct mbus_dram_target_info *dram_target_info;
struct resource *res;
struct device_node *dn = pdev->dev.of_node;
struct device_node *phy_node;
u32 phy_addr;
......@@ -2838,9 +2815,15 @@ static int mvneta_probe(struct platform_device *pdev)
clk_prepare_enable(pp->clk);
pp->base = of_iomap(dn, 0);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
err = -ENODEV;
goto err_clk;
}
pp->base = devm_ioremap_resource(&pdev->dev, res);
if (pp->base == NULL) {
err = -ENOMEM;
err = PTR_ERR(pp->base);
goto err_clk;
}
......@@ -2848,7 +2831,7 @@ static int mvneta_probe(struct platform_device *pdev)
pp->stats = alloc_percpu(struct mvneta_pcpu_stats);
if (!pp->stats) {
err = -ENOMEM;
goto err_unmap;
goto err_clk;
}
for_each_possible_cpu(cpu) {
......@@ -2913,8 +2896,6 @@ static int mvneta_probe(struct platform_device *pdev)
mvneta_deinit(pp);
err_free_stats:
free_percpu(pp->stats);
err_unmap:
iounmap(pp->base);
err_clk:
clk_disable_unprepare(pp->clk);
err_free_irq:
......@@ -2934,7 +2915,6 @@ static int mvneta_remove(struct platform_device *pdev)
mvneta_deinit(pp);
clk_disable_unprepare(pp->clk);
free_percpu(pp->stats);
iounmap(pp->base);
irq_dispose_mapping(dev->irq);
free_netdev(dev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册