fm10k: change default Tx ITR to 25usec

The current default ITR for Tx is overly restrictive. Using a simple
netperf TCP_STREAM test, we top out at about 10Gb/s for a single thread
when running using 1500 byte frames. By reducing the ITR value to 25usec
(up to 40K interrupts a second from 10K), we are able to achieve 36Gb/s
for a single thread TCP stream test.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/fm10k/fm10k.h

@@ -171,11 +171,12 @@ struct fm10k_ring_container {
 #define FM10K_ITR_MAX		0x0FFF	/* maximum value for ITR */
 #define FM10K_ITR_10K		100	/* 100us */
 #define FM10K_ITR_20K		50	/* 50us */
+#define FM10K_ITR_40K		25	/* 25us */
 #define FM10K_ITR_ADAPTIVE	0x8000	/* adaptive interrupt moderation flag */
 
 #define ITR_IS_ADAPTIVE(itr) (!!(itr & FM10K_ITR_ADAPTIVE))
 
-#define FM10K_TX_ITR_DEFAULT	FM10K_ITR_10K
+#define FM10K_TX_ITR_DEFAULT	FM10K_ITR_40K
 #define FM10K_RX_ITR_DEFAULT	FM10K_ITR_20K
 #define FM10K_ITR_ENABLE	(FM10K_ITR_AUTOMASK | FM10K_ITR_MASK_CLEAR)