提交 dbba306f 编写于 作者: I Ivo van Doorn 提交者: John W. Linville

rt2x00: Reorganize queue callback functions

As part of the queue refactoring, change the queue callback
function names to have 3 different actions: start, kick & stop.

We can now also remove the STATE_RADIO_RX_ON/STATE_RADIO_RX_OFF
device_state flags, and replace the usage with using the
start_queue/stop_queue callback functions.
This streamlines the RX queue handling to the
similar approach as all other queues.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 5450b7e2
......@@ -1058,12 +1058,6 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
case STATE_RADIO_OFF:
rt2400pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
rt2400pci_start_queue(rt2x00dev->rx);
break;
case STATE_RADIO_RX_OFF:
rt2400pci_stop_queue(rt2x00dev->rx);
break;
case STATE_RADIO_IRQ_ON:
case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
......@@ -1672,10 +1666,11 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
.link_stats = rt2400pci_link_stats,
.reset_tuner = rt2400pci_reset_tuner,
.link_tuner = rt2400pci_link_tuner,
.start_queue = rt2400pci_start_queue,
.kick_queue = rt2400pci_kick_queue,
.stop_queue = rt2400pci_stop_queue,
.write_tx_desc = rt2400pci_write_tx_desc,
.write_beacon = rt2400pci_write_beacon,
.kick_tx_queue = rt2400pci_kick_queue,
.kill_tx_queue = rt2400pci_stop_queue,
.fill_rxdone = rt2400pci_fill_rxdone,
.config_filter = rt2400pci_config_filter,
.config_intf = rt2400pci_config_intf,
......
......@@ -1213,12 +1213,6 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
case STATE_RADIO_OFF:
rt2500pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
rt2500pci_start_queue(rt2x00dev->rx);
break;
case STATE_RADIO_RX_OFF:
rt2500pci_stop_queue(rt2x00dev->rx);
break;
case STATE_RADIO_IRQ_ON:
case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
......@@ -1969,10 +1963,11 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
.link_stats = rt2500pci_link_stats,
.reset_tuner = rt2500pci_reset_tuner,
.link_tuner = rt2500pci_link_tuner,
.start_queue = rt2500pci_start_queue,
.kick_queue = rt2500pci_kick_queue,
.stop_queue = rt2500pci_stop_queue,
.write_tx_desc = rt2500pci_write_tx_desc,
.write_beacon = rt2500pci_write_beacon,
.kick_tx_queue = rt2500pci_kick_queue,
.kill_tx_queue = rt2500pci_stop_queue,
.fill_rxdone = rt2500pci_fill_rxdone,
.config_filter = rt2500pci_config_filter,
.config_intf = rt2500pci_config_intf,
......
......@@ -1057,12 +1057,6 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
case STATE_RADIO_OFF:
rt2500usb_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
rt2500usb_start_queue(rt2x00dev->rx);
break;
case STATE_RADIO_RX_OFF:
rt2500usb_stop_queue(rt2x00dev->rx);
break;
case STATE_RADIO_IRQ_ON:
case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
......@@ -1845,11 +1839,12 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
.link_stats = rt2500usb_link_stats,
.reset_tuner = rt2500usb_reset_tuner,
.watchdog = rt2x00usb_watchdog,
.start_queue = rt2500usb_start_queue,
.kick_queue = rt2x00usb_kick_queue,
.stop_queue = rt2500usb_stop_queue,
.write_tx_desc = rt2500usb_write_tx_desc,
.write_beacon = rt2500usb_write_beacon,
.get_tx_data_len = rt2500usb_get_tx_data_len,
.kick_tx_queue = rt2x00usb_kick_tx_queue,
.kill_tx_queue = rt2500usb_stop_queue,
.fill_rxdone = rt2500usb_fill_rxdone,
.config_shared_key = rt2500usb_config_key,
.config_pairwise_key = rt2500usb_config_key,
......
......@@ -537,12 +537,6 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2800pci_disable_radio(rt2x00dev);
rt2800pci_set_state(rt2x00dev, STATE_SLEEP);
break;
case STATE_RADIO_RX_ON:
rt2800pci_start_queue(rt2x00dev->rx);
break;
case STATE_RADIO_RX_OFF:
rt2800pci_stop_queue(rt2x00dev->rx);
break;
case STATE_RADIO_IRQ_ON:
case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
......@@ -1004,11 +998,12 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.link_stats = rt2800_link_stats,
.reset_tuner = rt2800_reset_tuner,
.link_tuner = rt2800_link_tuner,
.start_queue = rt2800pci_start_queue,
.kick_queue = rt2800pci_kick_queue,
.stop_queue = rt2800pci_stop_queue,
.write_tx_desc = rt2800pci_write_tx_desc,
.write_tx_data = rt2800_write_tx_data,
.write_beacon = rt2800_write_beacon,
.kick_tx_queue = rt2800pci_kick_queue,
.kill_tx_queue = rt2800pci_stop_queue,
.fill_rxdone = rt2800pci_fill_rxdone,
.config_shared_key = rt2800_config_shared_key,
.config_pairwise_key = rt2800_config_pairwise_key,
......
......@@ -254,12 +254,6 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2800usb_disable_radio(rt2x00dev);
rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
break;
case STATE_RADIO_RX_ON:
rt2800usb_start_queue(rt2x00dev->rx);
break;
case STATE_RADIO_RX_OFF:
rt2800usb_stop_queue(rt2x00dev->rx);
break;
case STATE_RADIO_IRQ_ON:
case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
......@@ -626,12 +620,13 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.reset_tuner = rt2800_reset_tuner,
.link_tuner = rt2800_link_tuner,
.watchdog = rt2800usb_watchdog,
.start_queue = rt2800usb_start_queue,
.kick_queue = rt2x00usb_kick_queue,
.stop_queue = rt2800usb_stop_queue,
.write_tx_desc = rt2800usb_write_tx_desc,
.write_tx_data = rt2800usb_write_tx_data,
.write_beacon = rt2800_write_beacon,
.get_tx_data_len = rt2800usb_get_tx_data_len,
.kick_tx_queue = rt2x00usb_kick_tx_queue,
.kill_tx_queue = rt2800usb_stop_queue,
.fill_rxdone = rt2800usb_fill_rxdone,
.config_shared_key = rt2800_config_shared_key,
.config_pairwise_key = rt2800_config_pairwise_key,
......
......@@ -567,7 +567,14 @@ struct rt2x00lib_ops {
struct link_qual *qual);
void (*link_tuner) (struct rt2x00_dev *rt2x00dev,
struct link_qual *qual, const u32 count);
/*
* Data queue handlers.
*/
void (*watchdog) (struct rt2x00_dev *rt2x00dev);
void (*start_queue) (struct data_queue *queue);
void (*kick_queue) (struct data_queue *queue);
void (*stop_queue) (struct data_queue *queue);
/*
* TX control handlers
......@@ -579,8 +586,6 @@ struct rt2x00lib_ops {
void (*write_beacon) (struct queue_entry *entry,
struct txentry_desc *txdesc);
int (*get_tx_data_len) (struct queue_entry *entry);
void (*kick_tx_queue) (struct data_queue *queue);
void (*kill_tx_queue) (struct data_queue *queue);
/*
* RX control handlers
......
......@@ -146,8 +146,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
* else the changes will be ignored by the device.
*/
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00dev->ops->lib->set_device_state(rt2x00dev,
STATE_RADIO_RX_OFF);
rt2x00dev->ops->lib->stop_queue(rt2x00dev->rx);
/*
* Write new antenna setup to device and reset the link tuner.
......@@ -161,8 +160,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
memcpy(active, &config, sizeof(config));
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00dev->ops->lib->set_device_state(rt2x00dev,
STATE_RADIO_RX_ON);
rt2x00dev->ops->lib->start_queue(rt2x00dev->rx);
}
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
......
......@@ -68,7 +68,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Enable RX.
*/
rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_RX_ON);
rt2x00dev->ops->lib->start_queue(rt2x00dev->rx);
rt2x00link_start_tuner(rt2x00dev);
/*
......@@ -104,7 +104,7 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
* Disable RX.
*/
rt2x00link_stop_tuner(rt2x00dev);
rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_RX_OFF);
rt2x00dev->ops->lib->stop_queue(rt2x00dev->rx);
/*
* Disable radio.
......
......@@ -352,7 +352,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
* if for any reason the link tuner must be reset, this will be
* handled by rt2x00lib_config().
*/
rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_RX_OFF);
rt2x00dev->ops->lib->stop_queue(rt2x00dev->rx);
/*
* When we've just turned on the radio, we want to reprogram
......@@ -370,7 +370,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
rt2x00lib_config_antenna(rt2x00dev, rt2x00dev->default_ant);
/* Turn RX back on */
rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_RX_ON);
rt2x00dev->ops->lib->start_queue(rt2x00dev->rx);
return 0;
}
......@@ -727,7 +727,7 @@ void rt2x00mac_flush(struct ieee80211_hw *hw, bool drop)
* any pending frames to be transmitted.
*/
tx_queue_for_each(rt2x00dev, queue) {
rt2x00dev->ops->lib->kick_tx_queue(queue);
rt2x00dev->ops->lib->kick_queue(queue);
}
/**
......
......@@ -471,7 +471,7 @@ static void rt2x00queue_kick_tx_queue(struct data_queue *queue,
*/
if (rt2x00queue_threshold(queue) ||
!test_bit(ENTRY_TXD_BURST, &txdesc->flags))
queue->rt2x00dev->ops->lib->kick_tx_queue(queue);
queue->rt2x00dev->ops->lib->kick_queue(queue);
}
int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
......@@ -585,7 +585,7 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
rt2x00queue_free_skb(intf->beacon);
if (!enable_beacon) {
rt2x00dev->ops->lib->kill_tx_queue(intf->beacon->queue);
rt2x00dev->ops->lib->stop_queue(intf->beacon->queue);
mutex_unlock(&intf->beacon_skb_mutex);
return 0;
}
......@@ -761,7 +761,7 @@ void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev)
struct data_queue *queue;
txall_queue_for_each(rt2x00dev, queue)
rt2x00dev->ops->lib->kill_tx_queue(queue);
rt2x00dev->ops->lib->stop_queue(queue);
}
void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev)
......
......@@ -83,8 +83,6 @@ enum dev_state {
*/
STATE_RADIO_ON,
STATE_RADIO_OFF,
STATE_RADIO_RX_ON,
STATE_RADIO_RX_OFF,
STATE_RADIO_IRQ_ON,
STATE_RADIO_IRQ_OFF,
STATE_RADIO_IRQ_ON_ISR,
......
......@@ -261,12 +261,22 @@ static void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
}
}
void rt2x00usb_kick_tx_queue(struct data_queue *queue)
void rt2x00usb_kick_queue(struct data_queue *queue)
{
rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
rt2x00usb_kick_tx_entry);
switch (queue->qid) {
case QID_AC_BE:
case QID_AC_BK:
case QID_AC_VI:
case QID_AC_VO:
if (!rt2x00queue_empty(queue))
rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
rt2x00usb_kick_tx_entry);
break;
default:
break;
}
}
EXPORT_SYMBOL_GPL(rt2x00usb_kick_tx_queue);
EXPORT_SYMBOL_GPL(rt2x00usb_kick_queue);
static void rt2x00usb_kill_entry(struct queue_entry *entry)
{
......@@ -422,11 +432,7 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0,
REGISTER_TIMEOUT);
/*
* The USB version of also works
* on the RX queue.
*/
rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev->rx);
rt2x00dev->ops->lib->stop_queue(rt2x00dev->rx);
}
EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
......
......@@ -378,13 +378,13 @@ struct queue_entry_priv_usb_bcn {
};
/**
* rt2x00usb_kick_tx_queue - Kick data queue
* rt2x00usb_kick_queue - Kick data queue
* @queue: Data queue to kick
*
* This will walk through all entries of the queue and push all pending
* frames to the hardware as a single burst.
*/
void rt2x00usb_kick_tx_queue(struct data_queue *queue);
void rt2x00usb_kick_queue(struct data_queue *queue);
/**
* rt2x00usb_stop_queue - Stop data queue
......
......@@ -1832,12 +1832,6 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
case STATE_RADIO_OFF:
rt61pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
rt61pci_start_queue(rt2x00dev->rx);
break;
case STATE_RADIO_RX_OFF:
rt61pci_stop_queue(rt2x00dev->rx);
break;
case STATE_RADIO_IRQ_ON:
case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
......@@ -2900,10 +2894,11 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
.link_stats = rt61pci_link_stats,
.reset_tuner = rt61pci_reset_tuner,
.link_tuner = rt61pci_link_tuner,
.start_queue = rt61pci_start_queue,
.kick_queue = rt61pci_kick_queue,
.stop_queue = rt61pci_stop_queue,
.write_tx_desc = rt61pci_write_tx_desc,
.write_beacon = rt61pci_write_beacon,
.kick_tx_queue = rt61pci_kick_queue,
.kill_tx_queue = rt61pci_stop_queue,
.fill_rxdone = rt61pci_fill_rxdone,
.config_shared_key = rt61pci_config_shared_key,
.config_pairwise_key = rt61pci_config_pairwise_key,
......
......@@ -1441,12 +1441,6 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
case STATE_RADIO_OFF:
rt73usb_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
rt73usb_start_queue(rt2x00dev->rx);
break;
case STATE_RADIO_RX_OFF:
rt73usb_stop_queue(rt2x00dev->rx);
break;
case STATE_RADIO_IRQ_ON:
case STATE_RADIO_IRQ_ON_ISR:
case STATE_RADIO_IRQ_OFF:
......@@ -2312,11 +2306,12 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
.reset_tuner = rt73usb_reset_tuner,
.link_tuner = rt73usb_link_tuner,
.watchdog = rt2x00usb_watchdog,
.start_queue = rt73usb_start_queue,
.kick_queue = rt2x00usb_kick_queue,
.stop_queue = rt73usb_stop_queue,
.write_tx_desc = rt73usb_write_tx_desc,
.write_beacon = rt73usb_write_beacon,
.get_tx_data_len = rt73usb_get_tx_data_len,
.kick_tx_queue = rt2x00usb_kick_tx_queue,
.kill_tx_queue = rt73usb_stop_queue,
.fill_rxdone = rt73usb_fill_rxdone,
.config_shared_key = rt73usb_config_shared_key,
.config_pairwise_key = rt73usb_config_pairwise_key,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册