SERIAL: core: add hardware assisted h/w flow control support

Ports which are handling h/w flow control in hardware must not have
their RTS state altered depending on the tty's hardware-stopped state.
Avoid this additional logic when setting the termios state.
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

drivers/tty/serial/serial_core.c

@@ -1255,6 +1255,13 @@ static void uart_set_termios(struct tty_struct *tty,
 		uart_set_mctrl(uport, mask);
 	}
 
+	/*
+	 * If the port is doing h/w assisted flow control, do nothing.
+	 * We assume that tty->hw_stopped has never been set.
+	 */
+	if (uport->flags & UPF_HARD_FLOW)
+		return;
+
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
 		spin_lock_irqsave(&uport->lock, flags);

include/linux/serial_core.h

@@ -163,6 +163,8 @@ struct uart_port {
 #define UPF_BUGGY_UART		((__force upf_t) (1 << 14))
 #define UPF_NO_TXEN_TEST	((__force upf_t) (1 << 15))
 #define UPF_MAGIC_MULTIPLIER	((__force upf_t) (1 << 16))
+/* Port has hardware-assisted h/w flow control (iow, auto-RTS *not* auto-CTS) */
+#define UPF_HARD_FLOW		((__force upf_t) (1 << 21))
 /* Port has hardware-assisted s/w flow control */
 #define UPF_SOFT_FLOW		((__force upf_t) (1 << 22))
 #define UPF_CONS_FLOW		((__force upf_t) (1 << 23))