scsi: be2iscsi: Move VLAN code to common iface_set_param

VLAN tag is L2 construct, move VLAN code out from configuring IP.
Rearrange and rename the APIs to make it consistent.
Replace ENOSYS with EPERM.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/be2iscsi/be_iscsi.c

@@ -315,8 +315,8 @@ void beiscsi_destroy_def_ifaces(struct beiscsi_hba *phba)
  *	Failure: Non-Zero Value
  **/
 static int
-beiscsi_set_vlan_tag(struct Scsi_Host *shost,
-		      struct iscsi_iface_param_info *iface_param)
+beiscsi_iface_config_vlan(struct Scsi_Host *shost,
+			  struct iscsi_iface_param_info *iface_param)
 {
 	struct beiscsi_hba *phba = iscsi_host_priv(shost);
 	int ret;
@@ -329,20 +329,17 @@ beiscsi_set_vlan_tag(struct Scsi_Host *shost,
 		return ret;
 	}
 
+	ret = -EPERM;
 	switch (iface_param->param) {
 	case ISCSI_NET_PARAM_VLAN_ENABLED:
+		ret = 0;
 		if (iface_param->value[0] != ISCSI_VLAN_ENABLE)
-			ret = mgmt_set_vlan(phba, BEISCSI_VLAN_DISABLE);
+			ret = beiscsi_if_set_vlan(phba, BEISCSI_VLAN_DISABLE);
 		break;
 	case ISCSI_NET_PARAM_VLAN_TAG:
-		ret = mgmt_set_vlan(phba,
-				    *((uint16_t *)iface_param->value));
+		ret = beiscsi_if_set_vlan(phba,
+					  *((uint16_t *)iface_param->value));
 		break;
-	default:
-		beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG,
-			    "BS_%d : Unknown Param Type : %d\n",
-			    iface_param->param);
-		return -ENOSYS;
 	}
 	return ret;
 }
@@ -356,7 +353,7 @@ beiscsi_iface_config_ipv4(struct Scsi_Host *shost,
 	struct beiscsi_hba *phba = iscsi_host_priv(shost);
 	u8 *ip = NULL, *subnet = NULL, *gw;
 	struct nlattr *nla;
-	int ret = 0;
+	int ret = -EPERM;
 
 	/* Check the param */
 	switch (info->param) {
@@ -405,14 +402,6 @@ beiscsi_iface_config_ipv4(struct Scsi_Host *shost,
 		}
 		ret = beiscsi_if_en_static(phba, BE2_IPV4, ip, subnet);
 		break;
-	case ISCSI_NET_PARAM_VLAN_ENABLED:
-	case ISCSI_NET_PARAM_VLAN_TAG:
-		ret = beiscsi_set_vlan_tag(shost, info);
-		break;
-	default:
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
-			    "BS_%d : Param %d not supported\n",
-			    info->param);
 	}
 
 	return ret;
@@ -424,7 +413,7 @@ beiscsi_iface_config_ipv6(struct Scsi_Host *shost,
 			  void *data, uint32_t dt_len)
 {
 	struct beiscsi_hba *phba = iscsi_host_priv(shost);
-	int ret = 0;
+	int ret = -EPERM;
 
 	switch (iface_param->param) {
 	case ISCSI_NET_PARAM_IFACE_ENABLE:
@@ -439,14 +428,6 @@ beiscsi_iface_config_ipv6(struct Scsi_Host *shost,
 		ret = beiscsi_if_en_static(phba, BE2_IPV6,
 					   iface_param->value, NULL);
 		break;
-	case ISCSI_NET_PARAM_VLAN_ENABLED:
-	case ISCSI_NET_PARAM_VLAN_TAG:
-		ret = beiscsi_set_vlan_tag(shost, iface_param);
-		break;
-	default:
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
-			    "BS_%d : Param %d not supported\n",
-			    iface_param->param);
 	}
 
 	return ret;
@@ -485,24 +466,42 @@ int be2iscsi_iface_set_param(struct Scsi_Host *shost,
 			return -EINVAL;
 		}
 
-		switch (iface_param->iface_type) {
-		case ISCSI_IFACE_TYPE_IPV4:
-			ret = beiscsi_iface_config_ipv4(shost, iface_param,
-							data, dt_len);
-			break;
-		case ISCSI_IFACE_TYPE_IPV6:
-			ret = beiscsi_iface_config_ipv6(shost, iface_param,
-							data, dt_len);
+		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG,
+			    "BS_%d : %s.0 set param %d",
+			    (iface_param->iface_type == ISCSI_IFACE_TYPE_IPV4) ?
+			    "ipv4" : "ipv6", iface_param->param);
+
+		ret = -EPERM;
+		switch (iface_param->param) {
+		case ISCSI_NET_PARAM_VLAN_ENABLED:
+		case ISCSI_NET_PARAM_VLAN_TAG:
+			ret = beiscsi_iface_config_vlan(shost, iface_param);
 			break;
 		default:
-			beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
-				    "BS_%d : Invalid iface type :%d passed\n",
-				    iface_param->iface_type);
-			break;
+			switch (iface_param->iface_type) {
+			case ISCSI_IFACE_TYPE_IPV4:
+				ret = beiscsi_iface_config_ipv4(shost,
+								iface_param,
+								data, dt_len);
+				break;
+			case ISCSI_IFACE_TYPE_IPV6:
+				ret = beiscsi_iface_config_ipv6(shost,
+								iface_param,
+								data, dt_len);
+				break;
+			}
 		}
 
+		if (ret == -EPERM) {
+			__beiscsi_log(phba, KERN_ERR,
+				      "BS_%d : %s.0 set param %d not permitted",
+				      (iface_param->iface_type ==
+				       ISCSI_IFACE_TYPE_IPV4) ? "ipv4" : "ipv6",
+				      iface_param->param);
+			ret = 0;
+		}
 		if (ret)
-			return ret;
+			break;
 	}
 
 	return ret;
@@ -548,16 +547,16 @@ static int be2iscsi_get_if_param(struct beiscsi_hba *phba,
 			len = -EINVAL;
 		else
 			len = sprintf(buf, "%d\n",
-				     (if_info->vlan_priority &
-				     ISCSI_MAX_VLAN_ID));
+				      (if_info->vlan_priority &
+				       ISCSI_MAX_VLAN_ID));
 		break;
 	case ISCSI_NET_PARAM_VLAN_PRIORITY:
 		if (if_info->vlan_priority == BEISCSI_VLAN_DISABLE)
 			len = -EINVAL;
 		else
 			len = sprintf(buf, "%d\n",
-				     ((if_info->vlan_priority >> 13) &
-				     ISCSI_MAX_VLAN_PRIORITY));
+				      ((if_info->vlan_priority >> 13) &
+				       ISCSI_MAX_VLAN_PRIORITY));
 		break;
 	default:
 		WARN_ON(1);

drivers/scsi/be2iscsi/be_mgmt.c

@@ -1001,6 +1001,9 @@ static int mgmt_alloc_cmd_data(struct beiscsi_hba *phba, struct be_dma_mem *cmd,
 	}
 	cmd->size = size;
 	be_cmd_hdr_prepare(cmd->va, CMD_SUBSYSTEM_ISCSI, iscsi_cmd, size);
+	beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG,
+		    "BG_%d : subsystem iSCSI cmd %d size %d\n",
+		    iscsi_cmd, size);
 	return 0;
 }
 
@@ -1259,6 +1262,42 @@ int beiscsi_if_en_dhcp(struct beiscsi_hba *phba, u32 ip_type)
 	return rc;
 }
 
+/**
+ * beiscsi_if_set_vlan()- Issue and wait for CMD completion
+ * @phba: device private structure instance
+ * @vlan_tag: VLAN tag
+ *
+ * Issue the MBX Cmd and wait for the completion of the
+ * command.
+ *
+ * returns
+ *	Success: 0
+ *	Failure: Non-Xero Value
+ **/
+int beiscsi_if_set_vlan(struct beiscsi_hba *phba, uint16_t vlan_tag)
+{
+	int rc;
+	unsigned int tag;
+
+	tag = be_cmd_set_vlan(phba, vlan_tag);
+	if (!tag) {
+		beiscsi_log(phba, KERN_ERR,
+			    (BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX),
+			    "BG_%d : VLAN Setting Failed\n");
+		return -EBUSY;
+	}
+
+	rc = beiscsi_mccq_compl_wait(phba, tag, NULL, NULL);
+	if (rc) {
+		beiscsi_log(phba, KERN_ERR,
+			    (BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX),
+			    "BS_%d : VLAN MBX Cmd Failed\n");
+		return rc;
+	}
+	return rc;
+}
+
+
 int mgmt_get_if_info(struct beiscsi_hba *phba, int ip_type,
 		     struct be_cmd_get_if_info_resp **if_info)
 {
@@ -1447,42 +1486,6 @@ int be_mgmt_get_boot_shandle(struct beiscsi_hba *phba,
 	return -ENXIO;
 }
 
-/**
- * mgmt_set_vlan()- Issue and wait for CMD completion
- * @phba: device private structure instance
- * @vlan_tag: VLAN tag
- *
- * Issue the MBX Cmd and wait for the completion of the
- * command.
- *
- * returns
- *	Success: 0
- *	Failure: Non-Xero Value
- **/
-int mgmt_set_vlan(struct beiscsi_hba *phba,
-		   uint16_t vlan_tag)
-{
-	int rc;
-	unsigned int tag;
-
-	tag = be_cmd_set_vlan(phba, vlan_tag);
-	if (!tag) {
-		beiscsi_log(phba, KERN_ERR,
-			    (BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX),
-			    "BG_%d : VLAN Setting Failed\n");
-		return -EBUSY;
-	}
-
-	rc = beiscsi_mccq_compl_wait(phba, tag, NULL, NULL);
-	if (rc) {
-		beiscsi_log(phba, KERN_ERR,
-			    (BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX),
-			    "BS_%d : VLAN MBX Cmd Failed\n");
-		return rc;
-	}
-	return rc;
-}
-
 /**
  * beiscsi_drvr_ver_disp()- Display the driver Name and Version
  * @dev: ptr to device not used.

drivers/scsi/be2iscsi/be_mgmt.h

@@ -308,7 +308,7 @@ int be_mgmt_get_boot_shandle(struct beiscsi_hba *phba,
 
 unsigned int mgmt_get_all_if_id(struct beiscsi_hba *phba);
 
-int mgmt_set_vlan(struct beiscsi_hba *phba, uint16_t vlan_tag);
+int beiscsi_if_set_vlan(struct beiscsi_hba *phba, uint16_t vlan_tag);
 
 ssize_t beiscsi_drvr_ver_disp(struct device *dev,
 			       struct device_attribute *attr, char *buf);