提交 dae320ec 编写于 作者: L Lokesh Vutla 提交者: Tony Lindgren

ARM: dts: DRA7: change address-cells and size-cells

DRA7 SoC has the capability to support DDR memory upto 4GB. In order to
represent this in memory dt node, the address-cells and size cells
should be 2. So, changing the address-cells and size-cells to 2 and
updating the memory nodes accordingly.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 4d91e285
......@@ -24,7 +24,7 @@
memory {
device_type = "memory";
reg = <0x80000000 0x80000000>;
reg = <0x0 0x80000000 0x0 0x80000000>;
};
vdd_3v3: fixedregulator-vdd_3v3 {
......
......@@ -21,7 +21,7 @@
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB - minimal configuration */
reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
};
leds {
......
......@@ -18,7 +18,7 @@
memory {
device_type = "memory";
reg = <0x80000000 0x60000000>; /* 1536 MB */
reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
};
evm_3v3_sd: fixedregulator-sd {
......
......@@ -15,8 +15,8 @@
#define MAX_SOURCES 400
/ {
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
compatible = "ti,dra7xx";
interrupt-parent = <&crossbar_mpu>;
......@@ -57,10 +57,10 @@
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48211000 0x1000>,
<0x48212000 0x1000>,
<0x48214000 0x2000>,
<0x48216000 0x2000>;
reg = <0x0 0x48211000 0x0 0x1000>,
<0x0 0x48212000 0x0 0x1000>,
<0x0 0x48214000 0x0 0x2000>,
<0x0 0x48216000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-parent = <&gic>;
};
......@@ -69,7 +69,7 @@
compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48281000 0x1000>;
reg = <0x0 0x48281000 0x0 0x1000>;
interrupt-parent = <&gic>;
};
......@@ -96,10 +96,10 @@
compatible = "ti,dra7-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ranges = <0x0 0x0 0x0 0xc0000000>;
ti,hwmods = "l3_main_1", "l3_main_2";
reg = <0x44000000 0x1000000>,
<0x45000000 0x1000>;
reg = <0x0 0x44000000 0x0 0x1000000>,
<0x0 0x45000000 0x0 0x1000>;
interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
......
......@@ -17,7 +17,7 @@
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1024 MB */
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
};
aliases {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册