提交 dadcd6d6 编写于 作者: M Mike Qiu 提交者: Benjamin Herrenschmidt

powerpc/eeh: sysfs entries lost

The sysfs entries are lost because of commit 2213fb14 ("powerpc/eeh:
Skip eeh sysfs when eeh is disabled"). That commit added condition
to create sysfs entries with EEH_ENABLED, which isn't populated
when trying to create sysfs entries on PowerNV platform during system
boot time. The patch fixes the issue by:

   * Reoder EEH initialization functions so that they're same on
     PowerNV/pSeries.
   * Cache PE's primary bus by PowerNV platform instead of EEH core
     to avoid kernel crash caused by the function reorder. Another
     benefit with this is to avoid one eeh_probe_mode_dev() in EEH
     core.
Signed-off-by: NMike Qiu <qiudayu@linux.vnet.ibm.com>
Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
上级 1b69be5e
......@@ -350,17 +350,6 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
pe->addr = edev->pe_config_addr;
pe->config_addr = edev->config_addr;
/*
* While doing PE reset, we probably hot-reset the
* upstream bridge. However, the PCI devices including
* the associated EEH devices might be removed when EEH
* core is doing recovery. So that won't safe to retrieve
* the bridge through downstream EEH device. We have to
* trace the parent PCI bus, then the upstream bridge.
*/
if (eeh_probe_mode_dev())
pe->bus = eeh_dev_to_pci_dev(edev)->bus;
/*
* Put the new EEH PE into hierarchy tree. If the parent
* can't be found, the newly created PE will be attached
......
......@@ -107,6 +107,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
struct pnv_phb *phb = hose->private_data;
struct device_node *dn = pci_device_to_OF_node(dev);
struct eeh_dev *edev = of_node_to_eeh_dev(dn);
int ret;
/*
* When probing the root bridge, which doesn't have any
......@@ -143,7 +144,21 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
edev->pe_config_addr = phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff);
/* Create PE */
eeh_add_to_parent_pe(edev);
ret = eeh_add_to_parent_pe(edev);
if (ret) {
pr_warn("%s: Can't add PCI dev %s to parent PE (%d)\n",
__func__, pci_name(dev), ret);
return ret;
}
/*
* Cache the PE primary bus, which can't be fetched when
* full hotplug is in progress. In that case, all child
* PCI devices of the PE are expected to be removed prior
* to PE reset.
*/
if (!edev->pe->bus)
edev->pe->bus = dev->bus;
/*
* Enable EEH explicitly so that we will do EEH check
......
......@@ -1145,8 +1145,8 @@ static void pnv_pci_ioda_fixup(void)
#ifdef CONFIG_EEH
eeh_probe_mode_set(EEH_PROBE_MODE_DEV);
eeh_addr_cache_build();
eeh_init();
eeh_addr_cache_build();
#endif
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册