提交 d9ca8e76 编写于 作者: L Lars-Peter Clausen 提交者: Mark Brown

ASoC: bf5xx-ssm2602: Setup sysclock in init callback

The sysclock is fixed, so just set it up once in the init callback instead of
setting it repeatably in the hw_params callback.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 e05854dd
...@@ -44,16 +44,8 @@ ...@@ -44,16 +44,8 @@
static struct snd_soc_card bf5xx_ssm2602; static struct snd_soc_card bf5xx_ssm2602;
static int bf5xx_ssm2602_hw_params(struct snd_pcm_substream *substream, static int bf5xx_ssm2602_dai_init(struct snd_soc_pcm_runtime *rtd)
struct snd_pcm_hw_params *params)
{ {
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
unsigned int clk = 0;
int ret = 0;
pr_debug("%s rate %d format %x\n", __func__, params_rate(params),
params_format(params));
/* /*
* If you are using a crystal source which frequency is not 12MHz * If you are using a crystal source which frequency is not 12MHz
* then modify the below case statement with frequency of the crystal. * then modify the below case statement with frequency of the crystal.
...@@ -61,31 +53,10 @@ static int bf5xx_ssm2602_hw_params(struct snd_pcm_substream *substream, ...@@ -61,31 +53,10 @@ static int bf5xx_ssm2602_hw_params(struct snd_pcm_substream *substream,
* If you are using the SPORT to generate clocking then this is * If you are using the SPORT to generate clocking then this is
* where to do it. * where to do it.
*/ */
return snd_soc_dai_set_sysclk(rtd->codec_dai, SSM2602_SYSCLK, 12000000,
switch (params_rate(params)) {
case 8000:
case 16000:
case 48000:
case 96000:
case 11025:
case 22050:
case 44100:
clk = 12000000;
break;
}
ret = snd_soc_dai_set_sysclk(codec_dai, SSM2602_SYSCLK, clk,
SND_SOC_CLOCK_IN); SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
return 0;
} }
static struct snd_soc_ops bf5xx_ssm2602_ops = {
.hw_params = bf5xx_ssm2602_hw_params,
};
/* CODEC is master for BCLK and LRC in this configuration. */ /* CODEC is master for BCLK and LRC in this configuration. */
#define BF5XX_SSM2602_DAIFMT (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | \ #define BF5XX_SSM2602_DAIFMT (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | \
SND_SOC_DAIFMT_CBM_CFM) SND_SOC_DAIFMT_CBM_CFM)
...@@ -98,7 +69,7 @@ static struct snd_soc_dai_link bf5xx_ssm2602_dai[] = { ...@@ -98,7 +69,7 @@ static struct snd_soc_dai_link bf5xx_ssm2602_dai[] = {
.codec_dai_name = "ssm2602-hifi", .codec_dai_name = "ssm2602-hifi",
.platform_name = "bfin-i2s-pcm-audio", .platform_name = "bfin-i2s-pcm-audio",
.codec_name = "ssm2602.0-001b", .codec_name = "ssm2602.0-001b",
.ops = &bf5xx_ssm2602_ops, .init = bf5xx_ssm2602_dai_init,
}, },
{ {
.name = "ssm2602", .name = "ssm2602",
...@@ -107,7 +78,7 @@ static struct snd_soc_dai_link bf5xx_ssm2602_dai[] = { ...@@ -107,7 +78,7 @@ static struct snd_soc_dai_link bf5xx_ssm2602_dai[] = {
.codec_dai_name = "ssm2602-hifi", .codec_dai_name = "ssm2602-hifi",
.platform_name = "bfin-i2s-pcm-audio", .platform_name = "bfin-i2s-pcm-audio",
.codec_name = "ssm2602.0-001b", .codec_name = "ssm2602.0-001b",
.ops = &bf5xx_ssm2602_ops, .init = bf5xx_ssm2602_dai_init,
}, },
}; };
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册