提交 d9975b0b 编写于 作者: S Sudeep Holla 提交者: Rafael J. Wysocki

cpufreq: arm_big_little: use generic OPP functions for {init, free}_opp_table

Currently when performing random CPU hot-plugs and suspend-to-ram(S2R)
on systems using arm_big_little cpufreq driver, we get warnings similar
to something like below:

cpu cpu1: _opp_add: duplicate OPPs detected. Existing: freq: 600000000,
	volt: 800000, enabled: 1. New: freq: 600000000, volt: 800000, enabled: 1

This is mainly because the OPPs for the shared cpus are not set. We can
just use dev_pm_opp_of_cpumask_add_table in case the OPPs are obtained
from DT(arm_big_little_dt.c) or use dev_pm_opp_set_sharing_cpus if the
OPPs are obtained by other means like firmware(e.g. scpi-cpufreq.c)

Also now that the generic dev_pm_opp{,_of}_cpumask_remove_table can
handle removal of opp table and entries for all associated CPUs, we can
re-use dev_pm_opp{,_of}_cpumask_remove_table as free_opp_table in
cpufreq_arm_bL_ops.

This patch makes necessary changes to reuse the generic OPP functions for
{init,free}_opp_table and thereby eliminating the warnings.
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
上级 28ed0573
......@@ -298,7 +298,8 @@ static int merge_cluster_tables(void)
return 0;
}
static void _put_cluster_clk_and_freq_table(struct device *cpu_dev)
static void _put_cluster_clk_and_freq_table(struct device *cpu_dev,
const struct cpumask *cpumask)
{
u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
......@@ -308,11 +309,12 @@ static void _put_cluster_clk_and_freq_table(struct device *cpu_dev)
clk_put(clk[cluster]);
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
if (arm_bL_ops->free_opp_table)
arm_bL_ops->free_opp_table(cpu_dev);
arm_bL_ops->free_opp_table(cpumask);
dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster);
}
static void put_cluster_clk_and_freq_table(struct device *cpu_dev)
static void put_cluster_clk_and_freq_table(struct device *cpu_dev,
const struct cpumask *cpumask)
{
u32 cluster = cpu_to_cluster(cpu_dev->id);
int i;
......@@ -321,7 +323,7 @@ static void put_cluster_clk_and_freq_table(struct device *cpu_dev)
return;
if (cluster < MAX_CLUSTERS)
return _put_cluster_clk_and_freq_table(cpu_dev);
return _put_cluster_clk_and_freq_table(cpu_dev, cpumask);
for_each_present_cpu(i) {
struct device *cdev = get_cpu_device(i);
......@@ -330,14 +332,15 @@ static void put_cluster_clk_and_freq_table(struct device *cpu_dev)
return;
}
_put_cluster_clk_and_freq_table(cdev);
_put_cluster_clk_and_freq_table(cdev, cpumask);
}
/* free virtual table */
kfree(freq_table[cluster]);
}
static int _get_cluster_clk_and_freq_table(struct device *cpu_dev)
static int _get_cluster_clk_and_freq_table(struct device *cpu_dev,
const struct cpumask *cpumask)
{
u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
int ret;
......@@ -345,7 +348,7 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev)
if (freq_table[cluster])
return 0;
ret = arm_bL_ops->init_opp_table(cpu_dev);
ret = arm_bL_ops->init_opp_table(cpumask);
if (ret) {
dev_err(cpu_dev, "%s: init_opp_table failed, cpu: %d, err: %d\n",
__func__, cpu_dev->id, ret);
......@@ -374,14 +377,15 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev)
free_opp_table:
if (arm_bL_ops->free_opp_table)
arm_bL_ops->free_opp_table(cpu_dev);
arm_bL_ops->free_opp_table(cpumask);
out:
dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__,
cluster);
return ret;
}
static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
static int get_cluster_clk_and_freq_table(struct device *cpu_dev,
const struct cpumask *cpumask)
{
u32 cluster = cpu_to_cluster(cpu_dev->id);
int i, ret;
......@@ -390,7 +394,7 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
return 0;
if (cluster < MAX_CLUSTERS) {
ret = _get_cluster_clk_and_freq_table(cpu_dev);
ret = _get_cluster_clk_and_freq_table(cpu_dev, cpumask);
if (ret)
atomic_dec(&cluster_usage[cluster]);
return ret;
......@@ -407,7 +411,7 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
return -ENODEV;
}
ret = _get_cluster_clk_and_freq_table(cdev);
ret = _get_cluster_clk_and_freq_table(cdev, cpumask);
if (ret)
goto put_clusters;
}
......@@ -433,7 +437,7 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
return -ENODEV;
}
_put_cluster_clk_and_freq_table(cdev);
_put_cluster_clk_and_freq_table(cdev, cpumask);
}
atomic_dec(&cluster_usage[cluster]);
......@@ -455,18 +459,6 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy)
return -ENODEV;
}
ret = get_cluster_clk_and_freq_table(cpu_dev);
if (ret)
return ret;
ret = cpufreq_table_validate_and_show(policy, freq_table[cur_cluster]);
if (ret) {
dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n",
policy->cpu, cur_cluster);
put_cluster_clk_and_freq_table(cpu_dev);
return ret;
}
if (cur_cluster < MAX_CLUSTERS) {
int cpu;
......@@ -479,6 +471,18 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy)
per_cpu(physical_cluster, policy->cpu) = A15_CLUSTER;
}
ret = get_cluster_clk_and_freq_table(cpu_dev, policy->cpus);
if (ret)
return ret;
ret = cpufreq_table_validate_and_show(policy, freq_table[cur_cluster]);
if (ret) {
dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n",
policy->cpu, cur_cluster);
put_cluster_clk_and_freq_table(cpu_dev, policy->cpus);
return ret;
}
if (arm_bL_ops->get_transition_latency)
policy->cpuinfo.transition_latency =
arm_bL_ops->get_transition_latency(cpu_dev);
......@@ -509,7 +513,7 @@ static int bL_cpufreq_exit(struct cpufreq_policy *policy)
return -ENODEV;
}
put_cluster_clk_and_freq_table(cpu_dev);
put_cluster_clk_and_freq_table(cpu_dev, policy->related_cpus);
dev_dbg(cpu_dev, "%s: Exited, cpu: %d\n", __func__, policy->cpu);
return 0;
......
......@@ -30,11 +30,11 @@ struct cpufreq_arm_bL_ops {
* This must set opp table for cpu_dev in a similar way as done by
* dev_pm_opp_of_add_table().
*/
int (*init_opp_table)(struct device *cpu_dev);
int (*init_opp_table)(const struct cpumask *cpumask);
/* Optional */
int (*get_transition_latency)(struct device *cpu_dev);
void (*free_opp_table)(struct device *cpu_dev);
void (*free_opp_table)(const struct cpumask *cpumask);
};
int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops);
......
......@@ -43,23 +43,6 @@ static struct device_node *get_cpu_node_with_valid_op(int cpu)
return np;
}
static int dt_init_opp_table(struct device *cpu_dev)
{
struct device_node *np;
int ret;
np = of_node_get(cpu_dev->of_node);
if (!np) {
pr_err("failed to find cpu%d node\n", cpu_dev->id);
return -ENOENT;
}
ret = dev_pm_opp_of_add_table(cpu_dev);
of_node_put(np);
return ret;
}
static int dt_get_transition_latency(struct device *cpu_dev)
{
struct device_node *np;
......@@ -81,8 +64,8 @@ static int dt_get_transition_latency(struct device *cpu_dev)
static struct cpufreq_arm_bL_ops dt_bL_ops = {
.name = "dt-bl",
.get_transition_latency = dt_get_transition_latency,
.init_opp_table = dt_init_opp_table,
.free_opp_table = dev_pm_opp_of_remove_table,
.init_opp_table = dev_pm_opp_of_cpumask_add_table,
.free_opp_table = dev_pm_opp_of_cpumask_remove_table,
};
static int generic_bL_probe(struct platform_device *pdev)
......
......@@ -18,6 +18,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/module.h>
#include <linux/platform_device.h>
......@@ -38,10 +39,20 @@ static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev)
return scpi_ops->dvfs_get_info(domain);
}
static int scpi_opp_table_ops(struct device *cpu_dev, bool remove)
static int scpi_get_transition_latency(struct device *cpu_dev)
{
int idx, ret = 0;
struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
if (IS_ERR(info))
return PTR_ERR(info);
return info->latency;
}
static int scpi_init_opp_table(const struct cpumask *cpumask)
{
int idx, ret;
struct scpi_opp *opp;
struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask));
struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
if (IS_ERR(info))
......@@ -51,11 +62,7 @@ static int scpi_opp_table_ops(struct device *cpu_dev, bool remove)
return -EIO;
for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) {
if (remove)
dev_pm_opp_remove(cpu_dev, opp->freq);
else
ret = dev_pm_opp_add(cpu_dev, opp->freq,
opp->m_volt * 1000);
ret = dev_pm_opp_add(cpu_dev, opp->freq, opp->m_volt * 1000);
if (ret) {
dev_warn(cpu_dev, "failed to add opp %uHz %umV\n",
opp->freq, opp->m_volt);
......@@ -64,33 +71,19 @@ static int scpi_opp_table_ops(struct device *cpu_dev, bool remove)
return ret;
}
}
return ret;
}
static int scpi_get_transition_latency(struct device *cpu_dev)
{
struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
if (IS_ERR(info))
return PTR_ERR(info);
return info->latency;
}
static int scpi_init_opp_table(struct device *cpu_dev)
{
return scpi_opp_table_ops(cpu_dev, false);
}
static void scpi_free_opp_table(struct device *cpu_dev)
{
scpi_opp_table_ops(cpu_dev, true);
ret = dev_pm_opp_set_sharing_cpus(cpu_dev, cpumask);
if (ret)
dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
__func__, ret);
return ret;
}
static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = {
.name = "scpi",
.get_transition_latency = scpi_get_transition_latency,
.init_opp_table = scpi_init_opp_table,
.free_opp_table = scpi_free_opp_table,
.free_opp_table = dev_pm_opp_cpumask_remove_table,
};
static int scpi_cpufreq_probe(struct platform_device *pdev)
......
......@@ -18,6 +18,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/module.h>
#include <linux/platform_device.h>
......@@ -26,8 +27,9 @@
#include "arm_big_little.h"
static int ve_spc_init_opp_table(struct device *cpu_dev)
static int ve_spc_init_opp_table(const struct cpumask *cpumask)
{
struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask));
/*
* platform specific SPC code must initialise the opp table
* so just check if the OPP count is non-zero
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册