提交 d93f5cde 编写于 作者: M Magnus Damm 提交者: Rafael J. Wysocki

ARM: mach-shmobile: sh7372 A3SP support (v4)

This change adds support for the sh7372 A3SP power domain.

The sh7372 A3SP hardware power domain contains a
wide range of I/O devices. The list of I/O devices
include SCIF serial ports, DMA Engine hardware,
SD and MMC controller hardware, USB controllers
and I2C master controllers.

This patch adds the A3SP low level code which
powers the hardware power domain on and off. It
also ties in platform devices to the pm domain
support code.

It is worth noting that the serial console is
hooked up to SCIFA0 on most sh7372 boards, and
the SCIFA0 port is included in the A3SP hardware
power domain. For this reason we cannot output
debug messages from the low level power control
code in the case of A3SP.

QoS support is needed in drivers before we can
enable the A3SP power control on the fly.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
上级 4ca46ff3
......@@ -1409,6 +1409,10 @@ static void __init ap4evb_init(void)
sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device);
hdmi_init_pm_clock();
fsi_init_pm_clock();
sh7372_pm_init();
......
......@@ -1588,6 +1588,14 @@ static void __init mackerel_init(void)
sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device);
sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device);
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device);
#endif
sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device);
hdmi_init_pm_clock();
sh7372_pm_init();
......
......@@ -479,7 +479,9 @@ struct platform_device;
struct sh7372_pm_domain {
struct generic_pm_domain genpd;
struct dev_power_governor *gov;
unsigned int bit_shift;
bool no_debug;
};
static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d)
......@@ -493,6 +495,7 @@ extern struct sh7372_pm_domain sh7372_a4mp;
extern struct sh7372_pm_domain sh7372_d4;
extern struct sh7372_pm_domain sh7372_a3rv;
extern struct sh7372_pm_domain sh7372_a3ri;
extern struct sh7372_pm_domain sh7372_a3sp;
extern struct sh7372_pm_domain sh7372_a3sg;
extern void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd);
......
......@@ -92,8 +92,9 @@ static int pd_power_down(struct generic_pm_domain *genpd)
}
}
pr_debug("sh7372 power domain down 0x%08x -> PSTR = 0x%08x\n",
mask, __raw_readl(PSTR));
if (!sh7372_pd->no_debug)
pr_debug("sh7372 power domain down 0x%08x -> PSTR = 0x%08x\n",
mask, __raw_readl(PSTR));
return 0;
}
......@@ -122,8 +123,9 @@ static int pd_power_up(struct generic_pm_domain *genpd)
ret = -EIO;
out:
pr_debug("sh7372 power domain up 0x%08x -> PSTR = 0x%08x\n",
mask, __raw_readl(PSTR));
if (!sh7372_pd->no_debug)
pr_debug("sh7372 power domain up 0x%08x -> PSTR = 0x%08x\n",
mask, __raw_readl(PSTR));
return ret;
}
......@@ -133,11 +135,20 @@ static bool pd_active_wakeup(struct device *dev)
return true;
}
static bool sh7372_power_down_forbidden(struct dev_pm_domain *domain)
{
return false;
}
struct dev_power_governor sh7372_always_on_gov = {
.power_down_ok = sh7372_power_down_forbidden,
};
void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd)
{
struct generic_pm_domain *genpd = &sh7372_pd->genpd;
pm_genpd_init(genpd, NULL, false);
pm_genpd_init(genpd, sh7372_pd->gov, false);
genpd->stop_device = pm_clk_suspend;
genpd->start_device = pm_clk_resume;
genpd->dev_irq_safe = true;
......@@ -183,6 +194,12 @@ struct sh7372_pm_domain sh7372_a3ri = {
.bit_shift = 8,
};
struct sh7372_pm_domain sh7372_a3sp = {
.bit_shift = 11,
.gov = &sh7372_always_on_gov,
.no_debug = true,
};
struct sh7372_pm_domain sh7372_a3sg = {
.bit_shift = 13,
};
......@@ -422,6 +439,9 @@ void __init sh7372_pm_init(void)
__raw_writel(0x0000a501, DBGREG9);
__raw_writel(0x00000000, DBGREG1);
/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
__raw_writel(0, PDNSEL);
sh7372_suspend_init();
sh7372_cpuidle_init();
}
......@@ -994,6 +994,7 @@ void __init sh7372_add_standard_devices(void)
sh7372_init_pm_domain(&sh7372_a3rv);
sh7372_init_pm_domain(&sh7372_a3ri);
sh7372_init_pm_domain(&sh7372_a3sg);
sh7372_init_pm_domain(&sh7372_a3sp);
sh7372_pm_add_subdomain(&sh7372_a4lc, &sh7372_a3rv);
......@@ -1006,6 +1007,19 @@ void __init sh7372_add_standard_devices(void)
sh7372_add_device_to_domain(&sh7372_a3rv, &vpu_device);
sh7372_add_device_to_domain(&sh7372_a4mp, &spu0_device);
sh7372_add_device_to_domain(&sh7372_a4mp, &spu1_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &scif0_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &scif1_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &scif2_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &scif3_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &scif4_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &scif5_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &scif6_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &iic1_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &dma0_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &dma1_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &dma2_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma0_device);
sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma1_device);
}
void __init sh7372_add_early_devices(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册