net: phy: broadcom: Add support for BCM54612E

This PHY has internal delays enabled after reset. This clears the
internal delay enables unless the interface specifically requests them.
Signed-off-by: NXo Wang <xow@google.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/phy/broadcom.c

@@ -337,6 +337,41 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
 	return ret;
 }
 
+static int bcm54612e_config_aneg(struct phy_device *phydev)
+{
+	int ret;
+
+	/* First, auto-negotiate. */
+	ret = genphy_config_aneg(phydev);
+
+	/* Clear TX internal delay unless requested. */
+	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
+	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
+		/* Disable TXD to GTXCLK clock delay (default set) */
+		/* Bit 9 is the only field in shadow register 00011 */
+		bcm_phy_write_shadow(phydev, 0x03, 0);
+	}
+
+	/* Clear RX internal delay unless requested. */
+	if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
+	    (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
+		u16 reg;
+
+		/* Errata: reads require filling in the write selector field */
+		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+				     MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC);
+		reg = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+		/* Disable RXD to RXC delay (default set) */
+		reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW;
+		/* Clear shadow selector field */
+		reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
+		bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+				     MII_BCM54XX_AUXCTL_MISC_WREN | reg);
+	}
+
+	return ret;
+}
+
 static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
 {
 	int val;
@@ -484,6 +519,18 @@ static struct phy_driver broadcom_drivers[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
+}, {
+	.phy_id		= PHY_ID_BCM54612E,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "Broadcom BCM54612E",
+	.features	= PHY_GBIT_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= bcm54xx_config_init,
+	.config_aneg	= bcm54612e_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 }, {
 	.phy_id		= PHY_ID_BCM54616S,
 	.phy_id_mask	= 0xfffffff0,
@@ -600,6 +647,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
 	{ PHY_ID_BCM5411, 0xfffffff0 },
 	{ PHY_ID_BCM5421, 0xfffffff0 },
 	{ PHY_ID_BCM5461, 0xfffffff0 },
+	{ PHY_ID_BCM54612E, 0xfffffff0 },
 	{ PHY_ID_BCM54616S, 0xfffffff0 },
 	{ PHY_ID_BCM5464, 0xfffffff0 },
 	{ PHY_ID_BCM5481, 0xfffffff0 },

include/linux/brcmphy.h

@@ -18,6 +18,7 @@
 #define PHY_ID_BCM5421			0x002060e0
 #define PHY_ID_BCM5464			0x002060b0
 #define PHY_ID_BCM5461			0x002060c0
+#define PHY_ID_BCM54612E		0x03625e60
 #define PHY_ID_BCM54616S		0x03625d10
 #define PHY_ID_BCM57780			0x03625d90