提交 d89173f2 编写于 作者: L Lennert Buytenhek 提交者: John W. Linville

mwl8k: s/IEEE80211_ADDR_LEN/ETH_ALEN/g

Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 c23b5a69
......@@ -38,8 +38,6 @@ static DEFINE_PCI_DEVICE_TABLE(mwl8k_table) = {
};
MODULE_DEVICE_TABLE(pci, mwl8k_table);
#define IEEE80211_ADDR_LEN ETH_ALEN
/* Register definitions */
#define MWL8K_HIU_GEN_PTR 0x00000c10
#define MWL8K_MODE_STA 0x0000005a
......@@ -199,7 +197,7 @@ struct mwl8k_priv {
/* XXX need to convert this to handle multiple interfaces */
bool capture_beacon;
u8 capture_bssid[IEEE80211_ADDR_LEN];
u8 capture_bssid[ETH_ALEN];
struct sk_buff *beacon_skb;
/*
......@@ -228,8 +226,8 @@ struct mwl8k_vif {
struct ieee80211_bss_conf bss_info;
/* BSSID of AP or IBSS */
u8 bssid[IEEE80211_ADDR_LEN];
u8 mac_addr[IEEE80211_ADDR_LEN];
u8 bssid[ETH_ALEN];
u8 mac_addr[ETH_ALEN];
/*
* Subset of supported legacy rates.
......@@ -785,7 +783,7 @@ static inline struct sk_buff *mwl8k_add_dma_header(struct sk_buff *skb)
memmove(&tr->wh, wh, hdrlen);
/* Clear addr4 */
memset(tr->wh.addr4, 0, IEEE80211_ADDR_LEN);
memset(tr->wh.addr4, 0, ETH_ALEN);
/*
* Firmware length is the length of the fully formed "802.11
......@@ -952,7 +950,7 @@ static inline void mwl8k_save_beacon(struct mwl8k_priv *priv,
struct sk_buff *skb)
{
priv->capture_beacon = false;
memset(priv->capture_bssid, 0, IEEE80211_ADDR_LEN);
memset(priv->capture_bssid, 0, ETH_ALEN);
/*
* Use GFP_ATOMIC as rxq_process is called from
......@@ -1067,7 +1065,7 @@ struct mwl8k_tx_desc {
__le16 qos_control;
__le32 pkt_phys_addr;
__le16 pkt_len;
__u8 dest_MAC_addr[IEEE80211_ADDR_LEN];
__u8 dest_MAC_addr[ETH_ALEN];
__le32 next_tx_desc_phys_addr;
__le32 reserved;
__le16 rate_info;
......@@ -1587,7 +1585,7 @@ struct mwl8k_cmd_get_hw_spec {
__u8 hw_rev;
__u8 host_interface;
__le16 num_mcaddrs;
__u8 perm_addr[IEEE80211_ADDR_LEN];
__u8 perm_addr[ETH_ALEN];
__le16 region_code;
__le32 fw_rev;
__le32 ps_cookie;
......@@ -1644,7 +1642,7 @@ struct mwl8k_cmd_mac_multicast_adr {
struct mwl8k_cmd_pkt header;
__le16 action;
__le16 numaddr;
__u8 addr[1][IEEE80211_ADDR_LEN];
__u8 addr[1][ETH_ALEN];
};
#define MWL8K_ENABLE_RX_MULTICAST 0x000F
......@@ -1655,7 +1653,7 @@ static int mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw,
struct mwl8k_cmd_mac_multicast_adr *cmd;
int index = 0;
int rc;
int size = sizeof(*cmd) + ((mc_count - 1) * IEEE80211_ADDR_LEN);
int size = sizeof(*cmd) + ((mc_count - 1) * ETH_ALEN);
cmd = kzalloc(size, GFP_KERNEL);
if (cmd == NULL)
return -ENOMEM;
......@@ -1665,11 +1663,11 @@ static int mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw,
cmd->action = cpu_to_le16(MWL8K_ENABLE_RX_MULTICAST);
cmd->numaddr = cpu_to_le16(mc_count);
while ((index < mc_count) && mclist) {
if (mclist->da_addrlen != IEEE80211_ADDR_LEN) {
if (mclist->da_addrlen != ETH_ALEN) {
rc = -EINVAL;
goto mwl8k_cmd_mac_multicast_adr_exit;
}
memcpy(cmd->addr[index], mclist->da_addr, IEEE80211_ADDR_LEN);
memcpy(cmd->addr[index], mclist->da_addr, ETH_ALEN);
index++;
mclist = mclist->next;
}
......@@ -1848,11 +1846,11 @@ static int mwl8k_cmd_set_pre_scan(struct ieee80211_hw *hw)
struct mwl8k_cmd_set_post_scan {
struct mwl8k_cmd_pkt header;
__le32 isibss;
__u8 bssid[IEEE80211_ADDR_LEN];
__u8 bssid[ETH_ALEN];
} __attribute__((packed));
static int
mwl8k_cmd_set_post_scan(struct ieee80211_hw *hw, __u8 mac[IEEE80211_ADDR_LEN])
mwl8k_cmd_set_post_scan(struct ieee80211_hw *hw, __u8 mac[ETH_ALEN])
{
struct mwl8k_cmd_set_post_scan *cmd;
int rc;
......@@ -1864,7 +1862,7 @@ mwl8k_cmd_set_post_scan(struct ieee80211_hw *hw, __u8 mac[IEEE80211_ADDR_LEN])
cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_POST_SCAN);
cmd->header.length = cpu_to_le16(sizeof(*cmd));
cmd->isibss = 0;
memcpy(cmd->bssid, mac, IEEE80211_ADDR_LEN);
memcpy(cmd->bssid, mac, ETH_ALEN);
rc = mwl8k_post_cmd(hw, &cmd->header);
kfree(cmd);
......@@ -2216,7 +2214,7 @@ struct mwl8k_cmd_update_sta_db {
__le32 action;
/* Peer MAC address */
__u8 peer_addr[IEEE80211_ADDR_LEN];
__u8 peer_addr[ETH_ALEN];
__le32 reserved;
......@@ -2244,7 +2242,7 @@ static int mwl8k_cmd_update_sta_db(struct ieee80211_hw *hw,
cmd->action = cpu_to_le32(action);
peer_info = &cmd->peer_info;
memcpy(cmd->peer_addr, mv_vif->bssid, IEEE80211_ADDR_LEN);
memcpy(cmd->peer_addr, mv_vif->bssid, ETH_ALEN);
switch (action) {
case MWL8K_STA_DB_ADD_ENTRY:
......@@ -2293,7 +2291,7 @@ struct mwl8k_cmd_update_set_aid {
__le16 aid;
/* AP's MAC address (BSSID) */
__u8 bssid[IEEE80211_ADDR_LEN];
__u8 bssid[ETH_ALEN];
__le16 protection_mode;
__u8 supp_rates[MWL8K_RATE_INDEX_MAX_ARRAY];
} __attribute__((packed));
......@@ -2317,7 +2315,7 @@ static int mwl8k_cmd_set_aid(struct ieee80211_hw *hw,
cmd->header.length = cpu_to_le16(sizeof(*cmd));
cmd->aid = cpu_to_le16(info->aid);
memcpy(cmd->bssid, mv_vif->bssid, IEEE80211_ADDR_LEN);
memcpy(cmd->bssid, mv_vif->bssid, ETH_ALEN);
prot_mode = MWL8K_FRAME_PROT_DISABLED;
......@@ -2934,7 +2932,7 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
/* Save the mac address */
memcpy(mwl8k_vif->mac_addr, conf->mac_addr, IEEE80211_ADDR_LEN);
memcpy(mwl8k_vif->mac_addr, conf->mac_addr, ETH_ALEN);
/* Back pointer to parent config block */
mwl8k_vif->priv = priv;
......@@ -3091,14 +3089,13 @@ static int mwl8k_bss_info_changed_wt(struct work_struct *wt)
* Finalize the join. Tell rx handler to process
* next beacon from our BSSID.
*/
memcpy(priv->capture_bssid,
mwl8k_vif->bssid, IEEE80211_ADDR_LEN);
memcpy(priv->capture_bssid, mwl8k_vif->bssid, ETH_ALEN);
priv->capture_beacon = true;
} else {
mwl8k_cmd_update_sta_db(hw, vif, MWL8K_STA_DB_DEL_ENTRY);
memset(&mwl8k_vif->bss_info, 0,
sizeof(struct ieee80211_bss_conf));
memset(mwl8k_vif->bssid, 0, IEEE80211_ADDR_LEN);
memset(mwl8k_vif->bssid, 0, ETH_ALEN);
}
mwl8k_bss_info_changed_exit:
......@@ -3117,7 +3114,7 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
int rc;
if (changed & BSS_CHANGED_BSSID)
memcpy(mv_vif->bssid, info->bssid, IEEE80211_ADDR_LEN);
memcpy(mv_vif->bssid, info->bssid, ETH_ALEN);
if ((changed & BSS_CHANGED_ASSOC) == 0)
return;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册