提交 d86cc04e 编写于 作者: R Rahul Lakkireddy 提交者: David S. Miller

cxgb4: handle interrupt raised when FW crashes

Handle TIMER0INT when FW crashes. Check for PCIE_FW[FW_EVAL]
and if it says "Device FW Crashed", then treat it as fatal.
Else, non-fatal.
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 9438d27a
......@@ -4040,6 +4040,7 @@ static void cim_intr_handler(struct adapter *adapter)
{ MBHOSTPARERR_F, "CIM mailbox host parity error", -1, 1 },
{ TIEQINPARERRINT_F, "CIM TIEQ outgoing parity error", -1, 1 },
{ TIEQOUTPARERRINT_F, "CIM TIEQ incoming parity error", -1, 1 },
{ TIMER0INT_F, "CIM TIMER0 interrupt", -1, 1 },
{ 0 }
};
static const struct intr_info cim_upintr_info[] = {
......@@ -4074,11 +4075,27 @@ static void cim_intr_handler(struct adapter *adapter)
{ 0 }
};
u32 val, fw_err;
int fat;
if (t4_read_reg(adapter, PCIE_FW_A) & PCIE_FW_ERR_F)
fw_err = t4_read_reg(adapter, PCIE_FW_A);
if (fw_err & PCIE_FW_ERR_F)
t4_report_fw_error(adapter);
/* When the Firmware detects an internal error which normally
* wouldn't raise a Host Interrupt, it forces a CIM Timer0 interrupt
* in order to make sure the Host sees the Firmware Crash. So
* if we have a Timer0 interrupt and don't see a Firmware Crash,
* ignore the Timer0 interrupt.
*/
val = t4_read_reg(adapter, CIM_HOST_INT_CAUSE_A);
if (val & TIMER0INT_F)
if (!(fw_err & PCIE_FW_ERR_F) ||
(PCIE_FW_EVAL_G(fw_err) != PCIE_FW_EVAL_CRASH))
t4_write_reg(adapter, CIM_HOST_INT_CAUSE_A,
TIMER0INT_F);
fat = t4_handle_intr_status(adapter, CIM_HOST_INT_CAUSE_A,
cim_intr_info) +
t4_handle_intr_status(adapter, CIM_HOST_UPACC_INT_CAUSE_A,
......
......@@ -1077,6 +1077,10 @@
#define TIEQINPARERRINT_V(x) ((x) << TIEQINPARERRINT_S)
#define TIEQINPARERRINT_F TIEQINPARERRINT_V(1U)
#define TIMER0INT_S 2
#define TIMER0INT_V(x) ((x) << TIMER0INT_S)
#define TIMER0INT_F TIMER0INT_V(1U)
#define PREFDROPINT_S 1
#define PREFDROPINT_V(x) ((x) << PREFDROPINT_S)
#define PREFDROPINT_F PREFDROPINT_V(1U)
......
......@@ -3088,6 +3088,10 @@ struct fw_debug_cmd {
#define FW_DEBUG_CMD_TYPE_G(x) \
(((x) >> FW_DEBUG_CMD_TYPE_S) & FW_DEBUG_CMD_TYPE_M)
enum pcie_fw_eval {
PCIE_FW_EVAL_CRASH = 0,
};
#define PCIE_FW_ERR_S 31
#define PCIE_FW_ERR_V(x) ((x) << PCIE_FW_ERR_S)
#define PCIE_FW_ERR_F PCIE_FW_ERR_V(1U)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册