提交 d845600e 编写于 作者: T Tomi Valkeinen

OMAPDSS: DSI: remove unused hsdiv wait funcs

With the previous patch "OMAPDSS: DSI: wait for hsdiv clocks when
enabling PLL",  dsi_wait_pll_hsdiv_dispc_active and
dsi_wait_pll_hsdiv_dsi_active are no longer needed, so they and the
callers can be removed.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
上级 544bfb68
......@@ -5255,21 +5255,6 @@ static void dsi_release_vc(struct omap_dss_device *dssdev, int channel)
}
}
void dsi_wait_pll_hsdiv_dispc_active(struct platform_device *dsidev)
{
if (wait_for_bit_change(dsidev, DSI_PLL_STATUS, 7, 1) != 1)
DSSERR("%s (%s) not active\n",
dss_get_generic_clk_source_name(OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC),
dss_feat_get_clk_source_name(OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC));
}
void dsi_wait_pll_hsdiv_dsi_active(struct platform_device *dsidev)
{
if (wait_for_bit_change(dsidev, DSI_PLL_STATUS, 8, 1) != 1)
DSSERR("%s (%s) not active\n",
dss_get_generic_clk_source_name(OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI),
dss_feat_get_clk_source_name(OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI));
}
static void dsi_calc_clock_param_ranges(struct platform_device *dsidev)
{
......
......@@ -296,7 +296,6 @@ static void dss_dump_regs(struct seq_file *s)
static void dss_select_dispc_clk_source(enum omap_dss_clk_source clk_src)
{
struct platform_device *dsidev;
int b;
u8 start, end;
......@@ -306,13 +305,9 @@ static void dss_select_dispc_clk_source(enum omap_dss_clk_source clk_src)
break;
case OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC:
b = 1;
dsidev = dsi_get_dsidev_from_id(0);
dsi_wait_pll_hsdiv_dispc_active(dsidev);
break;
case OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC:
b = 2;
dsidev = dsi_get_dsidev_from_id(1);
dsi_wait_pll_hsdiv_dispc_active(dsidev);
break;
default:
BUG();
......@@ -329,7 +324,6 @@ static void dss_select_dispc_clk_source(enum omap_dss_clk_source clk_src)
void dss_select_dsi_clk_source(int dsi_module,
enum omap_dss_clk_source clk_src)
{
struct platform_device *dsidev;
int b, pos;
switch (clk_src) {
......@@ -339,14 +333,10 @@ void dss_select_dsi_clk_source(int dsi_module,
case OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI:
BUG_ON(dsi_module != 0);
b = 1;
dsidev = dsi_get_dsidev_from_id(0);
dsi_wait_pll_hsdiv_dsi_active(dsidev);
break;
case OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI:
BUG_ON(dsi_module != 1);
b = 1;
dsidev = dsi_get_dsidev_from_id(1);
dsi_wait_pll_hsdiv_dsi_active(dsidev);
break;
default:
BUG();
......@@ -362,7 +352,6 @@ void dss_select_dsi_clk_source(int dsi_module,
void dss_select_lcd_clk_source(enum omap_channel channel,
enum omap_dss_clk_source clk_src)
{
struct platform_device *dsidev;
int b, ix, pos;
if (!dss_has_feature(FEAT_LCD_CLK_SRC)) {
......@@ -377,15 +366,11 @@ void dss_select_lcd_clk_source(enum omap_channel channel,
case OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC:
BUG_ON(channel != OMAP_DSS_CHANNEL_LCD);
b = 1;
dsidev = dsi_get_dsidev_from_id(0);
dsi_wait_pll_hsdiv_dispc_active(dsidev);
break;
case OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC:
BUG_ON(channel != OMAP_DSS_CHANNEL_LCD2 &&
channel != OMAP_DSS_CHANNEL_LCD3);
b = 1;
dsidev = dsi_get_dsidev_from_id(1);
dsi_wait_pll_hsdiv_dispc_active(dsidev);
break;
default:
BUG();
......
......@@ -299,8 +299,6 @@ int dsi_pll_set_clock_div(struct platform_device *dsidev,
int dsi_pll_init(struct platform_device *dsidev, bool enable_hsclk,
bool enable_hsdiv);
void dsi_pll_uninit(struct platform_device *dsidev, bool disconnect_lanes);
void dsi_wait_pll_hsdiv_dispc_active(struct platform_device *dsidev);
void dsi_wait_pll_hsdiv_dsi_active(struct platform_device *dsidev);
struct platform_device *dsi_get_dsidev_from_id(int module);
#else
static inline int dsi_runtime_get(struct platform_device *dsidev)
......@@ -336,12 +334,6 @@ static inline void dsi_pll_uninit(struct platform_device *dsidev,
bool disconnect_lanes)
{
}
static inline void dsi_wait_pll_hsdiv_dispc_active(struct platform_device *dsidev)
{
}
static inline void dsi_wait_pll_hsdiv_dsi_active(struct platform_device *dsidev)
{
}
static inline struct platform_device *dsi_get_dsidev_from_id(int module)
{
return NULL;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册