提交 d827e88a 编写于 作者: G Guenter Roeck 提交者: David S. Miller

net: dsa: mv88e6xxx: Provide function for common port initialization

Provide mv88e6xxx_setup_port_common() for common port initialization.
Currently only write Port 1 Control and VLAN configuration since
this will be needed for hardware bridging. More can be added later
if desired/needed.
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 acdaffcc
......@@ -700,6 +700,45 @@ int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
return 0;
}
int mv88e6xxx_setup_port_common(struct dsa_switch *ds, int port)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int ret, reg;
mutex_lock(&ps->smi_mutex);
/* Port Control 1: disable trunking. Also, if this is the
* CPU port, enable learn messages to be sent to this port.
*/
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), 0x05,
dsa_is_cpu_port(ds, port) ? 0x8000 : 0x0000);
if (ret)
goto abort;
/* Port based VLAN map: give each port its own address
* database, allow the CPU port to talk to each of the 'real'
* ports, and allow each of the 'real' ports to only talk to
* the upstream port.
*/
reg = (port & 0xf) << 12;
if (dsa_is_cpu_port(ds, port))
reg |= ds->phys_port_mask;
else
reg |= 1 << dsa_upstream_port(ds);
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), 0x06, reg);
if (ret)
goto abort;
/* Default VLAN ID and priority: don't set a default VLAN
* ID, and set the default packet priority to zero.
*/
ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), 0x07, 0x0000);
abort:
mutex_unlock(&ps->smi_mutex);
return ret;
}
int mv88e6xxx_setup_common(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
......
......@@ -57,6 +57,7 @@ struct mv88e6xxx_hw_stat {
int reg;
};
int mv88e6xxx_setup_port_common(struct dsa_switch *ds, int port);
int mv88e6xxx_setup_common(struct dsa_switch *ds);
int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg);
int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册