提交 d8026d93 编写于 作者: M Michael Chan 提交者: David S. Miller

bnx2: Set rx buffer water marks based on MTU.

The default rx buffer water marks for XOFF/XON are for 1500 MTU.  At
larger MTUs, these water marks need to be adjusted for effective
flow control.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NBenjamin Li <benli@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 5ec6d7bf
......@@ -4473,7 +4473,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
static int
bnx2_init_chip(struct bnx2 *bp)
{
u32 val;
u32 val, mtu;
int rc, i;
/* Make sure the interrupt is not active. */
......@@ -4565,11 +4565,19 @@ bnx2_init_chip(struct bnx2 *bp)
REG_WR(bp, BNX2_EMAC_BACKOFF_SEED, val);
/* Program the MTU. Also include 4 bytes for CRC32. */
val = bp->dev->mtu + ETH_HLEN + 4;
mtu = bp->dev->mtu;
val = mtu + ETH_HLEN + ETH_FCS_LEN;
if (val > (MAX_ETHERNET_PACKET_SIZE + 4))
val |= BNX2_EMAC_RX_MTU_SIZE_JUMBO_ENA;
REG_WR(bp, BNX2_EMAC_RX_MTU_SIZE, val);
if (mtu < 1500)
mtu = 1500;
bnx2_reg_wr_ind(bp, BNX2_RBUF_CONFIG, BNX2_RBUF_CONFIG_VAL(mtu));
bnx2_reg_wr_ind(bp, BNX2_RBUF_CONFIG2, BNX2_RBUF_CONFIG2_VAL(mtu));
bnx2_reg_wr_ind(bp, BNX2_RBUF_CONFIG3, BNX2_RBUF_CONFIG3_VAL(mtu));
for (i = 0; i < BNX2_MAX_MSIX_VEC; i++)
bp->bnx2_napi[i].last_status_idx = 0;
......
......@@ -4199,7 +4199,14 @@ struct l2_fhdr {
#define BNX2_RBUF_CONFIG 0x0020000c
#define BNX2_RBUF_CONFIG_XOFF_TRIP (0x3ffL<<0)
#define BNX2_RBUF_CONFIG_XOFF_TRIP_VAL(mtu) \
((((mtu) - 1500) * 31 / 1000) + 54)
#define BNX2_RBUF_CONFIG_XON_TRIP (0x3ffL<<16)
#define BNX2_RBUF_CONFIG_XON_TRIP_VAL(mtu) \
((((mtu) - 1500) * 39 / 1000) + 66)
#define BNX2_RBUF_CONFIG_VAL(mtu) \
(BNX2_RBUF_CONFIG_XOFF_TRIP_VAL(mtu) | \
(BNX2_RBUF_CONFIG_XON_TRIP_VAL(mtu) << 16))
#define BNX2_RBUF_FW_BUF_ALLOC 0x00200010
#define BNX2_RBUF_FW_BUF_ALLOC_VALUE (0x1ffL<<7)
......@@ -4221,11 +4228,25 @@ struct l2_fhdr {
#define BNX2_RBUF_CONFIG2 0x0020001c
#define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP (0x3ffL<<0)
#define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP_VAL(mtu) \
((((mtu) - 1500) * 4 / 1000) + 5)
#define BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP (0x3ffL<<16)
#define BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP_VAL(mtu) \
((((mtu) - 1500) * 2 / 100) + 30)
#define BNX2_RBUF_CONFIG2_VAL(mtu) \
(BNX2_RBUF_CONFIG2_MAC_DROP_TRIP_VAL(mtu) | \
(BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP_VAL(mtu) << 16))
#define BNX2_RBUF_CONFIG3 0x00200020
#define BNX2_RBUF_CONFIG3_CU_DROP_TRIP (0x3ffL<<0)
#define BNX2_RBUF_CONFIG3_CU_DROP_TRIP_VAL(mtu) \
((((mtu) - 1500) * 12 / 1000) + 18)
#define BNX2_RBUF_CONFIG3_CU_KEEP_TRIP (0x3ffL<<16)
#define BNX2_RBUF_CONFIG3_CU_KEEP_TRIP_VAL(mtu) \
((((mtu) - 1500) * 2 / 100) + 30)
#define BNX2_RBUF_CONFIG3_VAL(mtu) \
(BNX2_RBUF_CONFIG3_CU_DROP_TRIP_VAL(mtu) | \
(BNX2_RBUF_CONFIG3_CU_KEEP_TRIP_VAL(mtu) << 16))
#define BNX2_RBUF_PKT_DATA 0x00208000
#define BNX2_RBUF_CLIST_DATA 0x00210000
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册