Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

drivers/net/wireless/ath/ath9k/common-beacon.c

@@ -57,7 +57,7 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
 				 struct ath9k_beacon_state *bs)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
-	int dtim_intval, sleepduration;
+	int dtim_intval;
 	u64 tsf;
 
 	/* No need to configure beacon if we are not associated */
@@ -75,7 +75,6 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
 	 * last beacon we received (which may be none).
 	 */
 	dtim_intval = conf->intval * conf->dtim_period;
-	sleepduration = ah->hw->conf.listen_interval * conf->intval;
 
 	/*
 	 * Pull nexttbtt forward to reflect the current
@@ -113,7 +112,7 @@ int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
 	 */
 
 	bs->bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
-						  sleepduration));
+						  conf->intval));
 	if (bs->bs_sleepduration > bs->bs_dtimperiod)
 		bs->bs_sleepduration = bs->bs_dtimperiod;
 

drivers/net/wireless/ath/ath9k/htc_drv_txrx.c

@@ -978,7 +978,7 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	struct ath_hw *ah = common->ah;
 	struct ath_htc_rx_status *rxstatus;
 	struct ath_rx_status rx_stats;
-	bool decrypt_error;
+	bool decrypt_error = false;
 
 	if (skb->len < HTC_RX_FRAME_HEADER_SIZE) {
 		ath_err(common, "Corrupted RX frame, dropping (len: %d)\n",

drivers/net/wireless/ath/ath9k/main.c

@@ -502,7 +502,7 @@ irqreturn_t ath_isr(int irq, void *dev)
 	 * touch anything. Note this can happen early
 	 * on if the IRQ is shared.
 	 */
-	if (test_bit(ATH_OP_INVALID, &common->op_flags))
+	if (!ah || test_bit(ATH_OP_INVALID, &common->op_flags))
 		return IRQ_NONE;
 
 	/* shared irq, not for us */

drivers/net/wireless/brcm80211/Kconfig

@@ -27,10 +27,17 @@ config BRCMFMAC
 	  one of the bus interface support. If you choose to build a module,
 	  it'll be called brcmfmac.ko.
 
+config BRCMFMAC_PROTO_BCDC
+	bool
+
+config BRCMFMAC_PROTO_MSGBUF
+	bool
+
 config BRCMFMAC_SDIO
 	bool "SDIO bus interface support for FullMAC driver"
 	depends on (MMC = y || MMC = BRCMFMAC)
 	depends on BRCMFMAC
+	select BRCMFMAC_PROTO_BCDC
 	select FW_LOADER
 	default y
 	---help---
@@ -42,6 +49,7 @@ config BRCMFMAC_USB
 	bool "USB bus interface support for FullMAC driver"
 	depends on (USB = y || USB = BRCMFMAC)
 	depends on BRCMFMAC
+	select BRCMFMAC_PROTO_BCDC
 	select FW_LOADER
 	---help---
 	  This option enables the USB bus interface support for Broadcom
@@ -52,6 +60,8 @@ config BRCMFMAC_PCIE
 	bool "PCIE bus interface support for FullMAC driver"
 	depends on BRCMFMAC
 	depends on PCI
+	depends on HAS_DMA
+	select BRCMFMAC_PROTO_MSGBUF
 	select FW_LOADER
 	---help---
 	  This option enables the PCIE bus interface support for Broadcom

drivers/net/wireless/brcm80211/brcmfmac/Makefile

@@ -30,16 +30,18 @@ brcmfmac-objs += \
 		fwsignal.o \
 		p2p.o \
 		proto.o \
-		bcdc.o \
-		commonring.o \
-		flowring.o \
-		msgbuf.o \
 		dhd_common.o \
 		dhd_linux.o \
 		firmware.o \
 		feature.o \
 		btcoex.o \
 		vendor.o
+brcmfmac-$(CONFIG_BRCMFMAC_PROTO_BCDC) += \
+		bcdc.o
+brcmfmac-$(CONFIG_BRCMFMAC_PROTO_MSGBUF) += \
+		commonring.o \
+		flowring.o \
+		msgbuf.o
 brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \
 		dhd_sdio.o \
 		bcmsdh.o

drivers/net/wireless/brcm80211/brcmfmac/bcdc.h

@@ -16,9 +16,12 @@
 #ifndef BRCMFMAC_BCDC_H
 #define BRCMFMAC_BCDC_H
 
-
+#ifdef CONFIG_BRCMFMAC_PROTO_BCDC
 int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr);
 void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr);
-
+#else
+static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) { return 0; }
+static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {}
+#endif
 
 #endif /* BRCMFMAC_BCDC_H */

drivers/net/wireless/brcm80211/brcmfmac/fweh.c

@@ -185,7 +185,13 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr,
 		  ifevent->action, ifevent->ifidx, ifevent->bssidx,
 		  ifevent->flags, ifevent->role);
 
-	if (ifevent->flags & BRCMF_E_IF_FLAG_NOIF) {
+	/* The P2P Device interface event must not be ignored
+	 * contrary to what firmware tells us. The only way to
+	 * distinguish the P2P Device is by looking at the ifidx
+	 * and bssidx received.
+	 */
+	if (!(ifevent->ifidx == 0 && ifevent->bssidx == 1) &&
+	    (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) {
 		brcmf_dbg(EVENT, "event can be ignored\n");
 		return;
 	}
@@ -210,12 +216,12 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr,
 				return;
 	}
 
-	if (ifevent->action == BRCMF_E_IF_CHANGE)
+	if (ifp && ifevent->action == BRCMF_E_IF_CHANGE)
 		brcmf_fws_reset_interface(ifp);
 
 	err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data);
 
-	if (ifevent->action == BRCMF_E_IF_DEL) {
+	if (ifp && ifevent->action == BRCMF_E_IF_DEL) {
 		brcmf_fws_del_interface(ifp);
 		brcmf_del_if(drvr, ifevent->bssidx);
 	}

drivers/net/wireless/brcm80211/brcmfmac/fweh.h

@@ -172,6 +172,8 @@ enum brcmf_fweh_event_code {
 #define BRCMF_E_IF_ROLE_STA			0
 #define BRCMF_E_IF_ROLE_AP			1
 #define BRCMF_E_IF_ROLE_WDS			2
+#define BRCMF_E_IF_ROLE_P2P_GO			3
+#define BRCMF_E_IF_ROLE_P2P_CLIENT		4
 
 /**
  * definitions for event packet validation.

drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h

@@ -15,6 +15,7 @@
 #ifndef BRCMFMAC_MSGBUF_H
 #define BRCMFMAC_MSGBUF_H
 
+#ifdef CONFIG_BRCMFMAC_PROTO_MSGBUF
 
 #define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM	20
 #define BRCMF_H2D_MSGRING_RXPOST_SUBMIT_MAX_ITEM	256
@@ -32,9 +33,15 @@
 
 
 int brcmf_proto_msgbuf_rx_trigger(struct device *dev);
+void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid);
 int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr);
 void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr);
-void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid);
-
+#else
+static inline int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
+{
+	return 0;
+}
+static inline void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr) {}
+#endif
 
 #endif /* BRCMFMAC_MSGBUF_H */

drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c

@@ -498,8 +498,11 @@ brcmf_configure_arp_offload(struct brcmf_if *ifp, bool enable)
 static void
 brcmf_cfg80211_update_proto_addr_mode(struct wireless_dev *wdev)
 {
-	struct net_device *ndev = wdev->netdev;
-	struct brcmf_if *ifp = netdev_priv(ndev);
+	struct brcmf_cfg80211_vif *vif;
+	struct brcmf_if *ifp;
+
+	vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
+	ifp = vif->ifp;
 
 	if ((wdev->iftype == NL80211_IFTYPE_ADHOC) ||
 	    (wdev->iftype == NL80211_IFTYPE_AP) ||
@@ -4964,7 +4967,7 @@ static void brcmf_count_20mhz_channels(struct brcmf_cfg80211_info *cfg,
 	struct brcmu_chan ch;
 	int i;
 
-	for (i = 0; i <= total; i++) {
+	for (i = 0; i < total; i++) {
 		ch.chspec = (u16)le32_to_cpu(chlist->element[i]);
 		cfg->d11inf.decchspec(&ch);
 
@@ -5189,6 +5192,7 @@ static int brcmf_enable_bw40_2g(struct brcmf_cfg80211_info *cfg)
 
 		ch.band = BRCMU_CHAN_BAND_2G;
 		ch.bw = BRCMU_CHAN_BW_40;
+		ch.sb = BRCMU_CHAN_SB_NONE;
 		ch.chnum = 0;
 		cfg->d11inf.encchspec(&ch);
 
@@ -5222,6 +5226,7 @@ static int brcmf_enable_bw40_2g(struct brcmf_cfg80211_info *cfg)
 
 			brcmf_update_bw40_channel_flag(&band->channels[j], &ch);
 		}
+		kfree(pbuf);
 	}
 	return err;
 }

drivers/nfc/microread/microread.c

@@ -501,9 +501,13 @@ static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate,
 		targets->sens_res =
 			 be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A_ATQA]);
 		targets->sel_res = skb->data[MICROREAD_EMCF_A_SAK];
-		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
-		       skb->data[MICROREAD_EMCF_A_LEN]);
 		targets->nfcid1_len = skb->data[MICROREAD_EMCF_A_LEN];
+		if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
+			r = -EINVAL;
+			goto exit_free;
+		}
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
+		       targets->nfcid1_len);
 		break;
 	case MICROREAD_GATE_ID_MREAD_ISO_A_3:
 		targets->supported_protocols =
@@ -511,9 +515,13 @@ static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate,
 		targets->sens_res =
 			 be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A3_ATQA]);
 		targets->sel_res = skb->data[MICROREAD_EMCF_A3_SAK];
-		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
-		       skb->data[MICROREAD_EMCF_A3_LEN]);
 		targets->nfcid1_len = skb->data[MICROREAD_EMCF_A3_LEN];
+		if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
+			r = -EINVAL;
+			goto exit_free;
+		}
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
+		       targets->nfcid1_len);
 		break;
 	case MICROREAD_GATE_ID_MREAD_ISO_B:
 		targets->supported_protocols = NFC_PROTO_ISO14443_B_MASK;

drivers/nfc/st21nfca/Makefile

@@ -2,7 +2,8 @@
 # Makefile for ST21NFCA HCI based NFC driver
 #
 
-st21nfca_i2c-objs  = i2c.o
+st21nfca_hci-objs = st21nfca.o st21nfca_dep.o
+obj-$(CONFIG_NFC_ST21NFCA)     += st21nfca_hci.o
 
-obj-$(CONFIG_NFC_ST21NFCA)     += st21nfca.o st21nfca_dep.o
+st21nfca_i2c-objs  = i2c.o
 obj-$(CONFIG_NFC_ST21NFCA_I2C) += st21nfca_i2c.o

drivers/nfc/st21nfcb/Makefile

@@ -2,7 +2,8 @@
 # Makefile for ST21NFCB NCI based NFC driver
 #
 
-st21nfcb_i2c-objs  = i2c.o
+st21nfcb_nci-objs = ndlc.o st21nfcb.o
+obj-$(CONFIG_NFC_ST21NFCB)     += st21nfcb_nci.o
 
-obj-$(CONFIG_NFC_ST21NFCB)     += st21nfcb.o ndlc.o
+st21nfcb_i2c-objs = i2c.o
 obj-$(CONFIG_NFC_ST21NFCB_I2C) += st21nfcb_i2c.o

net/mac80211/sta_info.c

@@ -1823,7 +1823,7 @@ void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 		sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE;
 	if (sdata->vif.bss_conf.use_short_slot)
 		sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME;
-	sinfo->bss_param.dtim_period = sdata->local->hw.conf.ps_dtim_period;
+	sinfo->bss_param.dtim_period = sdata->vif.bss_conf.dtim_period;
 	sinfo->bss_param.beacon_interval = sdata->vif.bss_conf.beacon_int;
 
 	sinfo->sta_flags.set = 0;

net/rfkill/rfkill-gpio.c

@@ -54,7 +54,7 @@ static int rfkill_gpio_set_power(void *data, bool blocked)
 	if (blocked && !IS_ERR(rfkill->clk) && rfkill->clk_enabled)
 		clk_disable(rfkill->clk);
 
-	rfkill->clk_enabled = blocked;
+	rfkill->clk_enabled = !blocked;
 
 	return 0;
 }
@@ -163,6 +163,7 @@ static const struct acpi_device_id rfkill_acpi_match[] = {
 	{ "LNV4752", RFKILL_TYPE_GPS },
 	{ },
 };
+MODULE_DEVICE_TABLE(acpi, rfkill_acpi_match);
 #endif
 
 static struct platform_driver rfkill_gpio_driver = {

net/wireless/nl80211.c

@@ -7028,6 +7028,9 @@ void __cfg80211_send_event_skb(struct sk_buff *skb, gfp_t gfp)
 	struct nlattr *data = ((void **)skb->cb)[2];
 	enum nl80211_multicast_groups mcgrp = NL80211_MCGRP_TESTMODE;
 
+	/* clear CB data for netlink core to own from now on */
+	memset(skb->cb, 0, sizeof(skb->cb));
+
 	nla_nest_end(skb, data);
 	genlmsg_end(skb, hdr);
 
@@ -9357,6 +9360,9 @@ int cfg80211_vendor_cmd_reply(struct sk_buff *skb)
 	void *hdr = ((void **)skb->cb)[1];
 	struct nlattr *data = ((void **)skb->cb)[2];
 
+	/* clear CB data for netlink core to own from now on */
+	memset(skb->cb, 0, sizeof(skb->cb));
+
 	if (WARN_ON(!rdev->cur_cmd_info)) {
 		kfree_skb(skb);
 		return -EINVAL;