提交 d7a99f6b 编写于 作者: H Hans de Goede 提交者: Maxime Ripard

ARM: dts: sun7i: Enable USB DRC on A20-OLinuxIno-Lime

Enable the otg/drc usb controller on the A20-OLinuxIno-Lime.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
上级 d3c23bac
...@@ -135,6 +135,10 @@ ...@@ -135,6 +135,10 @@
status = "okay"; status = "okay";
}; };
&otg_sram {
status = "okay";
};
&pio { &pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
allwinner,pins = "PC3"; allwinner,pins = "PC3";
...@@ -149,6 +153,20 @@ ...@@ -149,6 +153,20 @@
allwinner,drive = <SUN4I_PINCTRL_20_MA>; allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
}; };
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
};
}; };
&reg_ahci_5v { &reg_ahci_5v {
...@@ -157,6 +175,10 @@ ...@@ -157,6 +175,10 @@
status = "okay"; status = "okay";
}; };
&reg_usb0_vbus {
status = "okay";
};
&reg_usb1_vbus { &reg_usb1_vbus {
status = "okay"; status = "okay";
}; };
...@@ -171,7 +193,17 @@ ...@@ -171,7 +193,17 @@
status = "okay"; status = "okay";
}; };
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy { &usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>; usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>; usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay"; status = "okay";
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册