提交 d7528862 编写于 作者: H Hendrik Brueckner 提交者: Martin Schwidefsky

s390/cpum_sf: Add flag to process full SDBs only

Add the PERF_CPUM_SF_FULL_BLOCKS flag to process only sample-data-blocks that
have the block-full-indicator bit set.  Sample-data-blocks that are partially
filled are discarded.  Use this flag if the sampling buffer is likely to be
shared among perf events that use different sampling modes.  In such
environments, flushing sample-data-blocks that are not completely filled, might
cause invalid-data-formats.

Setting PERF_CPUM_SF_FULL_BLOCKS prevents potentially invalid sampling data to
be processed but, in contrast, also discards valid samples in partially filled
sample-data-blocks.  Note that sample-data-blocks might not become full for
small sampling frequencies or for workload that is scheduled for tiny intervals.

To sample with the PERF_CPUM_SF_FULL_BLOCKS flag, set the perf->attr.config1
to 0x0004.  For example:

	perf record -e cpum_sf/config=0xB000,config1=0x0004/
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
上级 7e75fc3f
......@@ -59,6 +59,7 @@ struct perf_sf_sde_regs {
#define PERF_CPUM_SF_DIAG_MODE 0x0002 /* Diagnostic-sampling flag */
#define PERF_CPUM_SF_MODE_MASK (PERF_CPUM_SF_BASIC_MODE| \
PERF_CPUM_SF_DIAG_MODE)
#define PERF_CPUM_SF_FULL_BLOCKS 0x0004 /* Process full SDBs only */
#define REG_NONE 0
#define REG_OVERFLOW 1
......@@ -69,6 +70,7 @@ struct perf_sf_sde_regs {
#define SAMPL_RATE(hwc) ((hwc)->event_base)
#define SAMPL_FLAGS(hwc) ((hwc)->config_base)
#define SAMPL_DIAG_MODE(hwc) (SAMPL_FLAGS(hwc) & PERF_CPUM_SF_DIAG_MODE)
#define SDB_FULL_BLOCKS(hwc) (SAMPL_FLAGS(hwc) & PERF_CPUM_SF_FULL_BLOCKS)
/* Structure for sampling data entries to be passed as perf raw sample data
* to user space. Note that raw sample data must be aligned and, thus, might
......
......@@ -733,6 +733,10 @@ static int __hw_perf_event_init(struct perf_event *event)
SAMPL_FLAGS(hwc) |= PERF_CPUM_SF_DIAG_MODE;
}
/* Check and set other sampling flags */
if (attr->config1 & PERF_CPUM_SF_FULL_BLOCKS)
SAMPL_FLAGS(hwc) |= PERF_CPUM_SF_FULL_BLOCKS;
/* The sampling information (si) contains information about the
* min/max sampling intervals and the CPU speed. So calculate the
* correct sampling interval and avoid the whole period adjust
......@@ -1203,8 +1207,10 @@ static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt,
* register of the specified perf event.
*
* Only full sample-data-blocks are processed. Specify the flash_all flag
* to also walk through partially filled sample-data-blocks.
*
* to also walk through partially filled sample-data-blocks. It is ignored
* if PERF_CPUM_SF_FULL_BLOCKS is set. The PERF_CPUM_SF_FULL_BLOCKS flag
* enforces the processing of full sample-data-blocks only (trailer entries
* with the block-full-indicator bit set).
*/
static void hw_perf_event_update(struct perf_event *event, int flush_all)
{
......@@ -1214,6 +1220,9 @@ static void hw_perf_event_update(struct perf_event *event, int flush_all)
unsigned long long event_overflow, sampl_overflow, num_sdb, te_flags;
int done;
if (flush_all && SDB_FULL_BLOCKS(hwc))
flush_all = 0;
sdbt = (unsigned long *) TEAR_REG(hwc);
done = event_overflow = sampl_overflow = num_sdb = 0;
while (!done) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册