Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 core updates from Ingo Molnar:
 "There were so many changes in the x86/asm, x86/apic and x86/mm topics
  in this cycle that the topical separation of -tip broke down somewhat -
  so the result is a more traditional architecture pull request,
  collected into the 'x86/core' topic.

  The topics were still maintained separately as far as possible, so
  bisectability and conceptual separation should still be pretty good -
  but there were a handful of merge points to avoid excessive
  dependencies (and conflicts) that would have been poorly tested in the
  end.

  The next cycle will hopefully be much more quiet (or at least will
  have fewer dependencies).

  The main changes in this cycle were:

   * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
     Gleixner)

     - This is the second and most intrusive part of changes to the x86
       interrupt handling - full conversion to hierarchical interrupt
       domains:

          [IOAPIC domain]   -----
                                 |
          [MSI domain]      --------[Remapping domain] ----- [ Vector domain ]
                                 |   (optional)          |
          [HPET MSI domain] -----                        |
                                                         |
          [DMAR domain]     -----------------------------
                                                         |
          [Legacy domain]   -----------------------------

       This now reflects the actual hardware and allowed us to distangle
       the domain specific code from the underlying parent domain, which
       can be optional in the case of interrupt remapping.  It's a clear
       separation of functionality and removes quite some duct tape
       constructs which plugged the remap code between ioapic/msi/hpet
       and the vector management.

     - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
       injection into guests (Feng Wu)

   * x86/asm changes:

     - Tons of cleanups and small speedups, micro-optimizations.  This
       is in preparation to move a good chunk of the low level entry
       code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
       Brian Gerst)

     - Moved all system entry related code to a new home under
       arch/x86/entry/ (Ingo Molnar)

     - Removal of the fragile and ugly CFI dwarf debuginfo annotations.
       Conversion to C will reintroduce many of them - but meanwhile
       they are only getting in the way, and the upstream kernel does
       not rely on them (Ingo Molnar)

     - NOP handling refinements. (Borislav Petkov)

   * x86/mm changes:

     - Big PAT and MTRR rework: making the code more robust and
       preparing to phase out exposing direct MTRR interfaces to drivers -
       in favor of using PAT driven interfaces (Toshi Kani, Luis R
       Rodriguez, Borislav Petkov)

     - New ioremap_wt()/set_memory_wt() interfaces to support
       Write-Through cached memory mappings.  This is especially
       important for good performance on NVDIMM hardware (Toshi Kani)

   * x86/ras changes:

     - Add support for deferred errors on AMD (Aravind Gopalakrishnan)

       This is an important RAS feature which adds hardware support for
       poisoned data.  That means roughly that the hardware marks data
       which it has detected as corrupted but wasn't able to correct, as
       poisoned data and raises an APIC interrupt to signal that in the
       form of a deferred error.  It is the OS's responsibility then to
       take proper recovery action and thus prolonge system lifetime as
       far as possible.

     - Add support for Intel "Local MCE"s: upcoming CPUs will support
       CPU-local MCE interrupts, as opposed to the traditional system-
       wide broadcasted MCE interrupts (Ashok Raj)

     - Misc cleanups (Borislav Petkov)

   * x86/platform changes:

     - Intel Atom SoC updates

  ... and lots of other cleanups, fixlets and other changes - see the
  shortlog and the Git log for details"

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
  x86/hpet: Use proper hpet device number for MSI allocation
  x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
  x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
  x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
  x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  iommu, x86: Properly handle posted interrupts for IOMMU hotplug
  iommu, x86: Provide irq_remapping_cap() interface
  iommu, x86: Setup Posted-Interrupts capability for Intel iommu
  iommu, x86: Add cap_pi_support() to detect VT-d PI capability
  iommu, x86: Avoid migrating VT-d posted interrupts
  iommu, x86: Save the mode (posted or remapped) of an IRTE
  iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
  iommu: dmar: Provide helper to copy shared irte fields
  iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
  iommu: Add new member capability to struct irq_remap_ops
  x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
  x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
  x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
  ...

Documentation/kernel-parameters.txt

@@ -746,6 +746,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	cpuidle.off=1	[CPU_IDLE]
 			disable the cpuidle sub-system
 
+	cpu_init_udelay=N
+			[X86] Delay for N microsec between assert and de-assert
+			of APIC INIT to start processors.  This delay occurs
+			on every CPU online, such as boot, and resume from suspend.
+			Default: 10000
+
 	cpcihp_generic=	[HW,PCI] Generic port I/O CompactPCI driver
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]

Documentation/x86/entry_64.txt

@@ -18,10 +18,10 @@ Some of these entries are:
 
  - system_call: syscall instruction from 64-bit code.
 
- - ia32_syscall: int 0x80 from 32-bit or 64-bit code; compat syscall
+ - entry_INT80_compat: int 0x80 from 32-bit or 64-bit code; compat syscall
    either way.
 
- - ia32_syscall, ia32_sysenter: syscall and sysenter from 32-bit
+ - entry_INT80_compat, ia32_sysenter: syscall and sysenter from 32-bit
    code
 
  - interrupt: An array of entries.  Every IDT vector that doesn't

Documentation/x86/mtrr.txt

 MTRR (Memory Type Range Register) control
-3 Jun 1999
-Richard Gooch
-<rgooch@atnf.csiro.au>
+
+Richard Gooch <rgooch@atnf.csiro.au> - 3 Jun 1999
+Luis R. Rodriguez <mcgrof@do-not-panic.com> - April 9, 2015
+
+===============================================================================
+Phasing out MTRR use
+
+MTRR use is replaced on modern x86 hardware with PAT. Over time the only type
+of effective MTRR that is expected to be supported will be for write-combining.
+As MTRR use is phased out device drivers should use arch_phys_wc_add() to make
+MTRR effective on non-PAT systems while a no-op on PAT enabled systems.
+
+For details refer to Documentation/x86/pat.txt.
+
+===============================================================================
 
   On Intel P6 family processors (Pentium Pro, Pentium II and later)
   the Memory Type Range Registers (MTRRs) may be used to control

Documentation/x86/pat.txt

@@ -12,7 +12,7 @@ virtual addresses.
 
 PAT allows for different types of memory attributes. The most commonly used
 ones that will be supported at this time are Write-back, Uncached,
-Write-combined and Uncached Minus.
+Write-combined, Write-through and Uncached Minus.
 
 
 PAT APIs
@@ -34,16 +34,23 @@ ioremap                |    --    |    UC-     |       UC-        |
                        |          |            |                  |
 ioremap_cache          |    --    |    WB      |       WB         |
                        |          |            |                  |
+ioremap_uc             |    --    |    UC      |       UC         |
+                       |          |            |                  |
 ioremap_nocache        |    --    |    UC-     |       UC-        |
                        |          |            |                  |
 ioremap_wc             |    --    |    --      |       WC         |
                        |          |            |                  |
+ioremap_wt             |    --    |    --      |       WT         |
+                       |          |            |                  |
 set_memory_uc          |    UC-   |    --      |       --         |
  set_memory_wb         |          |            |                  |
                        |          |            |                  |
 set_memory_wc          |    WC    |    --      |       --         |
  set_memory_wb         |          |            |                  |
                        |          |            |                  |
+set_memory_wt          |    WT    |    --      |       --         |
+ set_memory_wb         |          |            |                  |
+                       |          |            |                  |
 pci sysfs resource     |    --    |    --      |       UC-        |
                        |          |            |                  |
 pci sysfs resource_wc  |    --    |    --      |       WC         |
@@ -102,7 +109,38 @@ wants to export a RAM region, it has to do set_memory_uc() or set_memory_wc()
 as step 0 above and also track the usage of those pages and use set_memory_wb()
 before the page is freed to free pool.
 
-
+MTRR effects on PAT / non-PAT systems
+-------------------------------------
+
+The following table provides the effects of using write-combining MTRRs when
+using ioremap*() calls on x86 for both non-PAT and PAT systems. Ideally
+mtrr_add() usage will be phased out in favor of arch_phys_wc_add() which will
+be a no-op on PAT enabled systems. The region over which a arch_phys_wc_add()
+is made, should already have been ioremapped with WC attributes or PAT entries,
+this can be done by using ioremap_wc() / set_memory_wc().  Devices which
+combine areas of IO memory desired to remain uncacheable with areas where
+write-combining is desirable should consider use of ioremap_uc() followed by
+set_memory_wc() to white-list effective write-combined areas.  Such use is
+nevertheless discouraged as the effective memory type is considered
+implementation defined, yet this strategy can be used as last resort on devices
+with size-constrained regions where otherwise MTRR write-combining would
+otherwise not be effective.
+
+----------------------------------------------------------------------
+MTRR Non-PAT   PAT    Linux ioremap value        Effective memory type
+----------------------------------------------------------------------
+                                                  Non-PAT |  PAT
+     PAT
+     |PCD
+     ||PWT
+     |||
+WC   000      WB      _PAGE_CACHE_MODE_WB            WC   |   WC
+WC   001      WC      _PAGE_CACHE_MODE_WC            WC*  |   WC
+WC   010      UC-     _PAGE_CACHE_MODE_UC_MINUS      WC*  |   UC
+WC   011      UC      _PAGE_CACHE_MODE_UC            UC   |   UC
+----------------------------------------------------------------------
+
+(*) denotes implementation defined and is discouraged
 
 Notes:
 
@@ -115,8 +153,8 @@ can be more restrictive, in case of any existing aliasing for that address.
 For example: If there is an existing uncached mapping, a new ioremap_wc can
 return uncached mapping in place of write-combine requested.
 
-set_memory_[uc|wc] and set_memory_wb should be used in pairs, where driver will
-first make a region uc or wc and switch it back to wb after use.
+set_memory_[uc|wc|wt] and set_memory_wb should be used in pairs, where driver
+will first make a region uc, wc or wt and switch it back to wb after use.
 
 Over time writes to /proc/mtrr will be deprecated in favor of using PAT based
 interfaces. Users writing to /proc/mtrr are suggested to use above interfaces.
@@ -124,7 +162,7 @@ interfaces. Users writing to /proc/mtrr are suggested to use above interfaces.
 Drivers should use ioremap_[uc|wc] to access PCI BARs with [uc|wc] access
 types.
 
-Drivers should use set_memory_[uc|wc] to set access type for RAM ranges.
+Drivers should use set_memory_[uc|wc|wt] to set access type for RAM ranges.
 
 
 PAT debugging

Documentation/x86/x86_64/boot-options.txt

@@ -31,6 +31,9 @@ Machine check
 		(e.g. BIOS or hardware monitoring applications), conflicting
 		with OS's error handling, and you cannot deactivate the agent,
 		then this option will be a help.
+   mce=no_lmce
+		Do not opt-in to Local MCE delivery. Use legacy method
+		to broadcast MCEs.
    mce=bootlog
 		Enable logging of machine checks left over from booting.
 		Disabled by default on AMD because some BIOS leave bogus ones.

MAINTAINERS

@@ -10894,7 +10894,7 @@ M:	Andy Lutomirski <luto@amacapital.net>
 L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/vdso
 S:	Maintained
-F:	arch/x86/vdso/
+F:	arch/x86/entry/vdso/
 
 XC2028/3028 TUNER DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>

arch/arc/include/asm/io.h

@@ -20,6 +20,7 @@ extern void iounmap(const void __iomem *addr);
 
 #define ioremap_nocache(phy, sz)	ioremap(phy, sz)
 #define ioremap_wc(phy, sz)		ioremap(phy, sz)
+#define ioremap_wt(phy, sz)		ioremap(phy, sz)
 
 /* Change struct page to physical address */
 #define page_to_phys(page)		(page_to_pfn(page) << PAGE_SHIFT)

arch/arm/include/asm/io.h

@@ -336,6 +336,7 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 #define ioremap_nocache(cookie,size)	__arm_ioremap((cookie), (size), MT_DEVICE)
 #define ioremap_cache(cookie,size)	__arm_ioremap((cookie), (size), MT_DEVICE_CACHED)
 #define ioremap_wc(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE_WC)
+#define ioremap_wt(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE)
 #define iounmap				__arm_iounmap
 
 /*

arch/arm64/include/asm/io.h

@@ -170,6 +170,7 @@ extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
 #define ioremap(addr, size)		__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
 #define ioremap_nocache(addr, size)	__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
 #define ioremap_wc(addr, size)		__ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
+#define ioremap_wt(addr, size)		__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
 #define iounmap				__iounmap
 
 /*

arch/avr32/include/asm/io.h

@@ -296,6 +296,7 @@ extern void __iounmap(void __iomem *addr);
 	__iounmap(addr)
 
 #define ioremap_wc ioremap_nocache
+#define ioremap_wt ioremap_nocache
 
 #define cached(addr) P1SEGADDR(addr)
 #define uncached(addr) P2SEGADDR(addr)

arch/frv/include/asm/io.h

@@ -17,6 +17,8 @@
 
 #ifdef __KERNEL__
 
+#define ARCH_HAS_IOREMAP_WT
+
 #include <linux/types.h>
 #include <asm/virtconvert.h>
 #include <asm/string.h>
@@ -265,7 +267,7 @@ static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned lon
 	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
 }
 
-static inline void __iomem *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+static inline void __iomem *ioremap_wt(unsigned long physaddr, unsigned long size)
 {
 	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
 }

arch/ia64/include/asm/irq_remapping.h

 #ifndef __IA64_INTR_REMAPPING_H
 #define __IA64_INTR_REMAPPING_H
 #define irq_remapping_enabled 0
-#define dmar_alloc_hwirq	create_irq
-#define dmar_free_hwirq		destroy_irq
 #endif

arch/ia64/kernel/msi_ia64.c

@@ -165,7 +165,7 @@ static struct irq_chip dmar_msi_type = {
 	.irq_retrigger = ia64_msi_retrigger_irq,
 };
 
-static int
+static void
 msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
 {
 	struct irq_cfg *cfg = irq_cfg + irq;
@@ -186,21 +186,29 @@ msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
 		MSI_DATA_LEVEL_ASSERT |
 		MSI_DATA_DELIVERY_FIXED |
 		MSI_DATA_VECTOR(cfg->vector);
-	return 0;
 }
 
-int arch_setup_dmar_msi(unsigned int irq)
+int dmar_alloc_hwirq(int id, int node, void *arg)
 {
-	int ret;
+	int irq;
 	struct msi_msg msg;
 
-	ret = msi_compose_msg(NULL, irq, &msg);
-	if (ret < 0)
-		return ret;
-	dmar_msi_write(irq, &msg);
-	irq_set_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
-				      "edge");
-	return 0;
+	irq = create_irq();
+	if (irq > 0) {
+		irq_set_handler_data(irq, arg);
+		irq_set_chip_and_handler_name(irq, &dmar_msi_type,
+					      handle_edge_irq, "edge");
+		msi_compose_msg(NULL, irq, &msg);
+		dmar_msi_write(irq, &msg);
+	}
+
+	return irq;
+}
+
+void dmar_free_hwirq(int irq)
+{
+	irq_set_handler_data(irq, NULL);
+	destroy_irq(irq);
 }
 #endif /* CONFIG_INTEL_IOMMU */
 

arch/m32r/include/asm/io.h

@@ -68,6 +68,7 @@ static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
 extern void iounmap(volatile void __iomem *addr);
 #define ioremap_nocache(off,size) ioremap(off,size)
 #define ioremap_wc ioremap_nocache
+#define ioremap_wt ioremap_nocache
 
 /*
  * IO bus memory addresses are also 1:1 with the physical address

arch/m68k/include/asm/io_mm.h

@@ -20,6 +20,8 @@
 
 #ifdef __KERNEL__
 
+#define ARCH_HAS_IOREMAP_WT
+
 #include <linux/compiler.h>
 #include <asm/raw_io.h>
 #include <asm/virtconvert.h>
@@ -465,7 +467,7 @@ static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned lon
 {
 	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
 }
-static inline void __iomem *ioremap_writethrough(unsigned long physaddr,
+static inline void __iomem *ioremap_wt(unsigned long physaddr,
 					 unsigned long size)
 {
 	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);

arch/m68k/include/asm/io_no.h

@@ -3,6 +3,8 @@
 
 #ifdef __KERNEL__
 
+#define ARCH_HAS_IOREMAP_WT
+
 #include <asm/virtconvert.h>
 #include <asm-generic/iomap.h>
 
@@ -153,7 +155,7 @@ static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
 {
 	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
 }
-static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+static inline void *ioremap_wt(unsigned long physaddr, unsigned long size)
 {
 	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
 }

arch/metag/include/asm/io.h

@@ -160,6 +160,9 @@ extern void __iounmap(void __iomem *addr);
 #define ioremap_wc(offset, size)                \
 	__ioremap((offset), (size), _PAGE_WR_COMBINE)
 
+#define ioremap_wt(offset, size)                \
+	__ioremap((offset), (size), 0)
+
 #define iounmap(addr)                           \
 	__iounmap(addr)
 

arch/microblaze/include/asm/io.h

@@ -39,10 +39,10 @@ extern resource_size_t isa_mem_base;
 extern void iounmap(void __iomem *addr);
 
 extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-#define ioremap_writethrough(addr, size)	ioremap((addr), (size))
 #define ioremap_nocache(addr, size)		ioremap((addr), (size))
 #define ioremap_fullcache(addr, size)		ioremap((addr), (size))
 #define ioremap_wc(addr, size)			ioremap((addr), (size))
+#define ioremap_wt(addr, size)			ioremap((addr), (size))
 
 #endif /* CONFIG_MMU */
 

arch/mn10300/include/asm/io.h

@@ -282,6 +282,7 @@ static inline void __iomem *ioremap_nocache(unsigned long offset, unsigned long
 }
 
 #define ioremap_wc ioremap_nocache
+#define ioremap_wt ioremap_nocache
 
 static inline void iounmap(void __iomem *addr)
 {

arch/nios2/include/asm/io.h

@@ -46,6 +46,7 @@ static inline void iounmap(void __iomem *addr)
 }
 
 #define ioremap_wc ioremap_nocache
+#define ioremap_wt ioremap_nocache
 
 /* Pages to physical address... */
 #define page_to_phys(page)	virt_to_phys(page_to_virt(page))

arch/s390/include/asm/io.h

@@ -29,6 +29,7 @@ void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr);
 
 #define ioremap_nocache(addr, size)	ioremap(addr, size)
 #define ioremap_wc			ioremap_nocache
+#define ioremap_wt			ioremap_nocache
 
 static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
 {

arch/sparc/include/asm/io_32.h

@@ -129,6 +129,7 @@ static inline void sbus_memcpy_toio(volatile void __iomem *dst,
 void __iomem *ioremap(unsigned long offset, unsigned long size);
 #define ioremap_nocache(X,Y)	ioremap((X),(Y))
 #define ioremap_wc(X,Y)		ioremap((X),(Y))
+#define ioremap_wt(X,Y)		ioremap((X),(Y))
 void iounmap(volatile void __iomem *addr);
 
 /* Create a virtual mapping cookie for an IO port range */

arch/sparc/include/asm/io_64.h

@@ -402,6 +402,7 @@ static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
 
 #define ioremap_nocache(X,Y)		ioremap((X),(Y))
 #define ioremap_wc(X,Y)			ioremap((X),(Y))
+#define ioremap_wt(X,Y)			ioremap((X),(Y))
 
 static inline void iounmap(volatile void __iomem *addr)
 {

arch/tile/include/asm/io.h

@@ -54,7 +54,7 @@ extern void iounmap(volatile void __iomem *addr);
 
 #define ioremap_nocache(physaddr, size)		ioremap(physaddr, size)
 #define ioremap_wc(physaddr, size)		ioremap(physaddr, size)
-#define ioremap_writethrough(physaddr, size)	ioremap(physaddr, size)
+#define ioremap_wt(physaddr, size)		ioremap(physaddr, size)
 #define ioremap_fullcache(physaddr, size)	ioremap(physaddr, size)
 
 #define mmiowb()

arch/x86/Kbuild

+
+obj-y += entry/
+
 obj-$(CONFIG_KVM) += kvm/
 
 # Xen paravirtualization support
@@ -11,7 +14,7 @@ obj-y += kernel/
 obj-y += mm/
 
 obj-y += crypto/
-obj-y += vdso/
+
 obj-$(CONFIG_IA32_EMULATION) += ia32/
 
 obj-y += platform/

arch/x86/Kconfig

@@ -9,141 +9,141 @@ config 64BIT
 config X86_32
 	def_bool y
 	depends on !64BIT
-	select CLKSRC_I8253
-	select HAVE_UID16
 
 config X86_64
 	def_bool y
 	depends on 64BIT
-	select X86_DEV_DMA_OPS
-	select ARCH_USE_CMPXCHG_LOCKREF
-	select HAVE_LIVEPATCH
 
 ### Arch settings
 config X86
 	def_bool y
-	select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
-	select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
+	select ACPI_LEGACY_TABLES_LOOKUP	if ACPI
+	select ACPI_SYSTEM_POWER_STATES_SUPPORT	if ACPI
+	select ANON_INODES
+	select ARCH_CLOCKSOURCE_DATA
+	select ARCH_DISCARD_MEMBLOCK
+	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
+	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FAST_MULTIPLIER
 	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_HAS_SG_CHAIN
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
+	select ARCH_MIGHT_HAVE_ACPI_PDC		if ACPI
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
-	select HAVE_AOUT if X86_32
-	select HAVE_UNSTABLE_SCHED_CLOCK
-	select ARCH_SUPPORTS_NUMA_BALANCING if X86_64
-	select ARCH_SUPPORTS_INT128 if X86_64
-	select HAVE_IDE
-	select HAVE_OPROFILE
-	select HAVE_PCSPKR_PLATFORM
-	select HAVE_PERF_EVENTS
-	select HAVE_IOREMAP_PROT
-	select HAVE_KPROBES
-	select HAVE_MEMBLOCK
-	select HAVE_MEMBLOCK_NODE_MAP
-	select ARCH_DISCARD_MEMBLOCK
-	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARCH_SUPPORTS_ATOMIC_RMW
+	select ARCH_SUPPORTS_INT128		if X86_64
+	select ARCH_SUPPORTS_NUMA_BALANCING	if X86_64
+	select ARCH_USE_BUILTIN_BSWAP
+	select ARCH_USE_CMPXCHG_LOCKREF		if X86_64
+	select ARCH_USE_QUEUED_RWLOCKS
+	select ARCH_USE_QUEUED_SPINLOCKS
 	select ARCH_WANT_FRAME_POINTERS
-	select HAVE_DMA_ATTRS
-	select HAVE_DMA_CONTIGUOUS
-	select HAVE_KRETPROBES
+	select ARCH_WANT_IPC_PARSE_VERSION	if X86_32
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select BUILDTIME_EXTABLE_SORT
+	select CLKEVT_I8253
+	select CLKSRC_I8253			if X86_32
+	select CLOCKSOURCE_VALIDATE_LAST_CYCLE
+	select CLOCKSOURCE_WATCHDOG
+	select CLONE_BACKWARDS			if X86_32
+	select COMPAT_OLD_SIGACTION		if IA32_EMULATION
+	select DCACHE_WORD_ACCESS
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_CLOCKEVENTS_BROADCAST	if X86_64 || (X86_32 && X86_LOCAL_APIC)
+	select GENERIC_CLOCKEVENTS_MIN_ADJUST
+	select GENERIC_CMOS_UPDATE
+	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_EARLY_IOREMAP
-	select HAVE_OPTPROBES
-	select HAVE_KPROBES_ON_FTRACE
-	select HAVE_FTRACE_MCOUNT_RECORD
-	select HAVE_FENTRY if X86_64
+	select GENERIC_FIND_FIRST_BIT
+	select GENERIC_IOMAP
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_PENDING_IRQ		if SMP
+	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
+	select GENERIC_TIME_VSYSCALL
+	select HAVE_ACPI_APEI			if ACPI
+	select HAVE_ACPI_APEI_NMI		if ACPI
+	select HAVE_ALIGNED_STRUCT_PAGE		if SLUB
+	select HAVE_AOUT			if X86_32
+	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_ARCH_HUGE_VMAP		if X86_64 || X86_PAE
+	select HAVE_ARCH_JUMP_LABEL
+	select HAVE_ARCH_KASAN			if X86_64 && SPARSEMEM_VMEMMAP
+	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_KMEMCHECK
+	select HAVE_ARCH_SECCOMP_FILTER
+	select HAVE_ARCH_SOFT_DIRTY		if X86_64
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+	select HAVE_BPF_JIT			if X86_64
+	select HAVE_CC_STACKPROTECTOR
+	select HAVE_CMPXCHG_DOUBLE
+	select HAVE_CMPXCHG_LOCAL
+	select HAVE_CONTEXT_TRACKING		if X86_64
 	select HAVE_C_RECORDMCOUNT
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DEBUG_STACKOVERFLOW
+	select HAVE_DMA_API_DEBUG
+	select HAVE_DMA_ATTRS
+	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
-	select HAVE_FUNCTION_TRACER
-	select HAVE_FUNCTION_GRAPH_TRACER
-	select HAVE_FUNCTION_GRAPH_FP_TEST
-	select HAVE_SYSCALL_TRACEPOINTS
-	select SYSCTL_EXCEPTION_TRACE
-	select HAVE_KVM
-	select HAVE_ARCH_KGDB
-	select HAVE_ARCH_TRACEHOOK
-	select HAVE_GENERIC_DMA_COHERENT if X86_32
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
-	select USER_STACKTRACE_SUPPORT
-	select HAVE_REGS_AND_STACK_ACCESS_API
-	select HAVE_DMA_API_DEBUG
-	select HAVE_KERNEL_GZIP
+	select HAVE_FENTRY			if X86_64
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FUNCTION_GRAPH_FP_TEST
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACER
+	select HAVE_GENERIC_DMA_COHERENT	if X86_32
+	select HAVE_HW_BREAKPOINT
+	select HAVE_IDE
+	select HAVE_IOREMAP_PROT
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK	if X86_64
+	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_LZ4
 	select HAVE_KERNEL_LZMA
-	select HAVE_KERNEL_XZ
 	select HAVE_KERNEL_LZO
-	select HAVE_KERNEL_LZ4
-	select HAVE_HW_BREAKPOINT
+	select HAVE_KERNEL_XZ
+	select HAVE_KPROBES
+	select HAVE_KPROBES_ON_FTRACE
+	select HAVE_KRETPROBES
+	select HAVE_KVM
+	select HAVE_LIVEPATCH			if X86_64
+	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_MIXED_BREAKPOINTS_REGS
-	select PERF_EVENTS
+	select HAVE_OPROFILE
+	select HAVE_OPTPROBES
+	select HAVE_PCSPKR_PLATFORM
+	select HAVE_PERF_EVENTS
 	select HAVE_PERF_EVENTS_NMI
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
-	select HAVE_DEBUG_KMEMLEAK
-	select ANON_INODES
-	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
-	select HAVE_CMPXCHG_LOCAL
-	select HAVE_CMPXCHG_DOUBLE
-	select HAVE_ARCH_KMEMCHECK
-	select HAVE_ARCH_KASAN if X86_64 && SPARSEMEM_VMEMMAP
+	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_SYSCALL_TRACEPOINTS
+	select HAVE_UID16			if X86_32
+	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_USER_RETURN_NOTIFIER
-	select ARCH_HAS_ELF_RANDOMIZE
-	select HAVE_ARCH_JUMP_LABEL
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select SPARSE_IRQ
-	select GENERIC_FIND_FIRST_BIT
-	select GENERIC_IRQ_PROBE
-	select GENERIC_PENDING_IRQ if SMP
-	select GENERIC_IRQ_SHOW
-	select GENERIC_CLOCKEVENTS_MIN_ADJUST
 	select IRQ_FORCED_THREADING
-	select HAVE_BPF_JIT if X86_64
-	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
-	select HAVE_ARCH_HUGE_VMAP if X86_64 || (X86_32 && X86_PAE)
-	select ARCH_HAS_SG_CHAIN
-	select CLKEVT_I8253
-	select ARCH_HAVE_NMI_SAFE_CMPXCHG
-	select GENERIC_IOMAP
-	select DCACHE_WORD_ACCESS
-	select GENERIC_SMP_IDLE_THREAD
-	select ARCH_WANT_IPC_PARSE_VERSION if X86_32
-	select HAVE_ARCH_SECCOMP_FILTER
-	select BUILDTIME_EXTABLE_SORT
-	select GENERIC_CMOS_UPDATE
-	select HAVE_ARCH_SOFT_DIRTY if X86_64
-	select CLOCKSOURCE_WATCHDOG
-	select GENERIC_CLOCKEVENTS
-	select ARCH_CLOCKSOURCE_DATA
-	select CLOCKSOURCE_VALIDATE_LAST_CYCLE
-	select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
-	select GENERIC_TIME_VSYSCALL
-	select GENERIC_STRNCPY_FROM_USER
-	select GENERIC_STRNLEN_USER
-	select HAVE_CONTEXT_TRACKING if X86_64
-	select HAVE_IRQ_TIME_ACCOUNTING
-	select VIRT_TO_BUS
-	select MODULES_USE_ELF_REL if X86_32
-	select MODULES_USE_ELF_RELA if X86_64
-	select CLONE_BACKWARDS if X86_32
-	select ARCH_USE_BUILTIN_BSWAP
-	select ARCH_USE_QUEUED_SPINLOCKS
-	select ARCH_USE_QUEUED_RWLOCKS
-	select OLD_SIGSUSPEND3 if X86_32 || IA32_EMULATION
-	select OLD_SIGACTION if X86_32
-	select COMPAT_OLD_SIGACTION if IA32_EMULATION
+	select MODULES_USE_ELF_RELA		if X86_64
+	select MODULES_USE_ELF_REL		if X86_32
+	select OLD_SIGACTION			if X86_32
+	select OLD_SIGSUSPEND3			if X86_32 || IA32_EMULATION
+	select PERF_EVENTS
 	select RTC_LIB
-	select HAVE_DEBUG_STACKOVERFLOW
-	select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64
-	select HAVE_CC_STACKPROTECTOR
-	select GENERIC_CPU_AUTOPROBE
-	select HAVE_ARCH_AUDITSYSCALL
-	select ARCH_SUPPORTS_ATOMIC_RMW
-	select HAVE_ACPI_APEI if ACPI
-	select HAVE_ACPI_APEI_NMI if ACPI
-	select ACPI_LEGACY_TABLES_LOOKUP if ACPI
-	select X86_FEATURE_NAMES if PROC_FS
+	select SPARSE_IRQ
 	select SRCU
+	select SYSCTL_EXCEPTION_TRACE
+	select USER_STACKTRACE_SUPPORT
+	select VIRT_TO_BUS
+	select X86_DEV_DMA_OPS			if X86_64
+	select X86_FEATURE_NAMES		if PROC_FS
 
 config INSTRUCTION_DECODER
 	def_bool y
@@ -261,10 +261,6 @@ config X86_64_SMP
 	def_bool y
 	depends on X86_64 && SMP
 
-config X86_HT
-	def_bool y
-	depends on SMP
-
 config X86_32_LAZY_GS
 	def_bool y
 	depends on X86_32 && !CC_STACKPROTECTOR
@@ -342,7 +338,7 @@ config X86_FEATURE_NAMES
 
 config X86_X2APIC
 	bool "Support x2apic"
-	depends on X86_LOCAL_APIC && X86_64 && IRQ_REMAP
+	depends on X86_LOCAL_APIC && X86_64 && (IRQ_REMAP || HYPERVISOR_GUEST)
 	---help---
 	  This enables x2apic support on CPUs that have this feature.
 
@@ -442,6 +438,7 @@ config X86_UV
 	depends on X86_EXTENDED_PLATFORM
 	depends on NUMA
 	depends on X86_X2APIC
+	depends on PCI
 	---help---
 	  This option is needed in order to support SGI Ultraviolet systems.
 	  If you don't have one of these, you should say N here.
@@ -467,7 +464,6 @@ config X86_INTEL_CE
 	select X86_REBOOTFIXUPS
 	select OF
 	select OF_EARLY_FLATTREE
-	select IRQ_DOMAIN
 	---help---
 	  Select for the Intel CE media processor (CE4100) SOC.
 	  This option compiles in support for the CE4100 SOC for settop
@@ -852,11 +848,12 @@ config NR_CPUS
 	default "1" if !SMP
 	default "8192" if MAXSMP
 	default "32" if SMP && X86_BIGSMP
-	default "8" if SMP
+	default "8" if SMP && X86_32
+	default "64" if SMP
 	---help---
 	  This allows you to specify the maximum number of CPUs which this
 	  kernel will support.  If CPUMASK_OFFSTACK is enabled, the maximum
-	  supported value is 4096, otherwise the maximum value is 512.  The
+	  supported value is 8192, otherwise the maximum value is 512.  The
 	  minimum value which makes sense is 2.
 
 	  This is purely to save memory - each supported CPU adds
@@ -864,7 +861,7 @@ config NR_CPUS
 
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
-	depends on X86_HT
+	depends on SMP
 	---help---
 	  SMT scheduler support improves the CPU scheduler's decision making
 	  when dealing with Intel Pentium 4 chips with HyperThreading at a
@@ -874,7 +871,7 @@ config SCHED_SMT
 config SCHED_MC
 	def_bool y
 	prompt "Multi-core scheduler support"
-	depends on X86_HT
+	depends on SMP
 	---help---
 	  Multi-core scheduler support improves the CPU scheduler's decision
 	  making when dealing with multi-core CPU chips at a cost of slightly
@@ -915,12 +912,12 @@ config X86_UP_IOAPIC
 config X86_LOCAL_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI
-	select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ
+	select IRQ_DOMAIN_HIERARCHY
+	select PCI_MSI_IRQ_DOMAIN if PCI_MSI
 
 config X86_IO_APIC
 	def_bool y
 	depends on X86_LOCAL_APIC || X86_UP_IOAPIC
-	select IRQ_DOMAIN
 
 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	bool "Reroute for broken boot IRQs"

arch/x86/Kconfig.debug

@@ -344,4 +344,15 @@ config X86_DEBUG_FPU
 
 	  If unsure, say N.
 
+config PUNIT_ATOM_DEBUG
+	tristate "ATOM Punit debug driver"
+	select DEBUG_FS
+	select IOSF_MBI
+	---help---
+	  This is a debug driver, which gets the power states
+	  of all Punit North Complex devices. The power states of
+	  each device is exposed as part of the debugfs interface.
+	  The current power state can be read from
+	  /sys/kernel/debug/punit_atom/dev_power_state
+
 endmenu

arch/x86/Makefile

@@ -77,6 +77,12 @@ else
         KBUILD_AFLAGS += -m64
         KBUILD_CFLAGS += -m64
 
+        # Align jump targets to 1 byte, not the default 16 bytes:
+        KBUILD_CFLAGS += -falign-jumps=1
+
+        # Pack loops tightly as well:
+        KBUILD_CFLAGS += -falign-loops=1
+
         # Don't autogenerate traditional x87 instructions
         KBUILD_CFLAGS += $(call cc-option,-mno-80387)
         KBUILD_CFLAGS += $(call cc-option,-mno-fp-ret-in-387)
@@ -84,6 +90,9 @@ else
 	# Use -mpreferred-stack-boundary=3 if supported.
 	KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=3)
 
+	# Use -mskip-rax-setup if supported.
+	KBUILD_CFLAGS += $(call cc-option,-mskip-rax-setup)
+
         # FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
         cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
         cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
@@ -140,12 +149,6 @@ endif
 sp-$(CONFIG_X86_32) := esp
 sp-$(CONFIG_X86_64) := rsp
 
-# do binutils support CFI?
-cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
-# is .cfi_signal_frame supported too?
-cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
-cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
-
 # does binutils support specific instructions?
 asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1)
 asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1)
@@ -153,8 +156,8 @@ asinstr += $(call as-instr,crc32l %eax$(comma)%eax,-DCONFIG_AS_CRC32=1)
 avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1)
 avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1)
 
-KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr)
-KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr)
+KBUILD_AFLAGS += $(asinstr) $(avx_instr) $(avx2_instr)
+KBUILD_CFLAGS += $(asinstr) $(avx_instr) $(avx2_instr)
 
 LDFLAGS := -m elf_$(UTS_MACHINE)
 
@@ -178,7 +181,7 @@ archscripts: scripts_basic
 # Syscall table generation
 
 archheaders:
-	$(Q)$(MAKE) $(build)=arch/x86/syscalls all
+	$(Q)$(MAKE) $(build)=arch/x86/entry/syscalls all
 
 archprepare:
 ifeq ($(CONFIG_KEXEC_FILE),y)
@@ -241,7 +244,7 @@ install:
 
 PHONY += vdso_install
 vdso_install:
-	$(Q)$(MAKE) $(build)=arch/x86/vdso $@
+	$(Q)$(MAKE) $(build)=arch/x86/entry/vdso $@
 
 archclean:
 	$(Q)rm -rf $(objtree)/arch/i386

arch/x86/entry/Makefile

+#
+# Makefile for the x86 low level entry code
+#
+obj-y				:= entry_$(BITS).o thunk_$(BITS).o syscall_$(BITS).o
+
+obj-y				+= vdso/
+obj-y				+= vsyscall/
+
+obj-$(CONFIG_IA32_EMULATION)	+= entry_64_compat.o syscall_32.o
+

arch/x86/include/asm/calling.h → arch/x86/entry/calling.h

@@ -46,8 +46,6 @@ For 32-bit we have the following conventions - kernel is built with
 
 */
 
-#include <asm/dwarf2.h>
-
 #ifdef CONFIG_X86_64
 
 /*
@@ -91,28 +89,27 @@ For 32-bit we have the following conventions - kernel is built with
 #define SIZEOF_PTREGS	21*8
 
 	.macro ALLOC_PT_GPREGS_ON_STACK addskip=0
-	subq	$15*8+\addskip, %rsp
-	CFI_ADJUST_CFA_OFFSET 15*8+\addskip
+	addq	$-(15*8+\addskip), %rsp
 	.endm
 
 	.macro SAVE_C_REGS_HELPER offset=0 rax=1 rcx=1 r8910=1 r11=1
 	.if \r11
-	movq_cfi r11, 6*8+\offset
+	movq %r11, 6*8+\offset(%rsp)
 	.endif
 	.if \r8910
-	movq_cfi r10, 7*8+\offset
-	movq_cfi r9,  8*8+\offset
-	movq_cfi r8,  9*8+\offset
+	movq %r10, 7*8+\offset(%rsp)
+	movq %r9,  8*8+\offset(%rsp)
+	movq %r8,  9*8+\offset(%rsp)
 	.endif
 	.if \rax
-	movq_cfi rax, 10*8+\offset
+	movq %rax, 10*8+\offset(%rsp)
 	.endif
 	.if \rcx
-	movq_cfi rcx, 11*8+\offset
+	movq %rcx, 11*8+\offset(%rsp)
 	.endif
-	movq_cfi rdx, 12*8+\offset
-	movq_cfi rsi, 13*8+\offset
-	movq_cfi rdi, 14*8+\offset
+	movq %rdx, 12*8+\offset(%rsp)
+	movq %rsi, 13*8+\offset(%rsp)
+	movq %rdi, 14*8+\offset(%rsp)
 	.endm
 	.macro SAVE_C_REGS offset=0
 	SAVE_C_REGS_HELPER \offset, 1, 1, 1, 1
@@ -131,24 +128,24 @@ For 32-bit we have the following conventions - kernel is built with
 	.endm
 
 	.macro SAVE_EXTRA_REGS offset=0
-	movq_cfi r15, 0*8+\offset
-	movq_cfi r14, 1*8+\offset
-	movq_cfi r13, 2*8+\offset
-	movq_cfi r12, 3*8+\offset
-	movq_cfi rbp, 4*8+\offset
-	movq_cfi rbx, 5*8+\offset
+	movq %r15, 0*8+\offset(%rsp)
+	movq %r14, 1*8+\offset(%rsp)
+	movq %r13, 2*8+\offset(%rsp)
+	movq %r12, 3*8+\offset(%rsp)
+	movq %rbp, 4*8+\offset(%rsp)
+	movq %rbx, 5*8+\offset(%rsp)
 	.endm
 	.macro SAVE_EXTRA_REGS_RBP offset=0
-	movq_cfi rbp, 4*8+\offset
+	movq %rbp, 4*8+\offset(%rsp)
 	.endm
 
 	.macro RESTORE_EXTRA_REGS offset=0
-	movq_cfi_restore 0*8+\offset, r15
-	movq_cfi_restore 1*8+\offset, r14
-	movq_cfi_restore 2*8+\offset, r13
-	movq_cfi_restore 3*8+\offset, r12
-	movq_cfi_restore 4*8+\offset, rbp
-	movq_cfi_restore 5*8+\offset, rbx
+	movq 0*8+\offset(%rsp), %r15
+	movq 1*8+\offset(%rsp), %r14
+	movq 2*8+\offset(%rsp), %r13
+	movq 3*8+\offset(%rsp), %r12
+	movq 4*8+\offset(%rsp), %rbp
+	movq 5*8+\offset(%rsp), %rbx
 	.endm
 
 	.macro ZERO_EXTRA_REGS
@@ -162,24 +159,24 @@ For 32-bit we have the following conventions - kernel is built with
 
 	.macro RESTORE_C_REGS_HELPER rstor_rax=1, rstor_rcx=1, rstor_r11=1, rstor_r8910=1, rstor_rdx=1
 	.if \rstor_r11
-	movq_cfi_restore 6*8, r11
+	movq 6*8(%rsp), %r11
 	.endif
 	.if \rstor_r8910
-	movq_cfi_restore 7*8, r10
-	movq_cfi_restore 8*8, r9
-	movq_cfi_restore 9*8, r8
+	movq 7*8(%rsp), %r10
+	movq 8*8(%rsp), %r9
+	movq 9*8(%rsp), %r8
 	.endif
 	.if \rstor_rax
-	movq_cfi_restore 10*8, rax
+	movq 10*8(%rsp), %rax
 	.endif
 	.if \rstor_rcx
-	movq_cfi_restore 11*8, rcx
+	movq 11*8(%rsp), %rcx
 	.endif
 	.if \rstor_rdx
-	movq_cfi_restore 12*8, rdx
+	movq 12*8(%rsp), %rdx
 	.endif
-	movq_cfi_restore 13*8, rsi
-	movq_cfi_restore 14*8, rdi
+	movq 13*8(%rsp), %rsi
+	movq 14*8(%rsp), %rdi
 	.endm
 	.macro RESTORE_C_REGS
 	RESTORE_C_REGS_HELPER 1,1,1,1,1
@@ -204,8 +201,7 @@ For 32-bit we have the following conventions - kernel is built with
 	.endm
 
 	.macro REMOVE_PT_GPREGS_FROM_STACK addskip=0
-	addq $15*8+\addskip, %rsp
-	CFI_ADJUST_CFA_OFFSET -(15*8+\addskip)
+	subq $-(15*8+\addskip), %rsp
 	.endm
 
 	.macro icebp
@@ -224,23 +220,23 @@ For 32-bit we have the following conventions - kernel is built with
  */
 
 	.macro SAVE_ALL
-	pushl_cfi_reg eax
-	pushl_cfi_reg ebp
-	pushl_cfi_reg edi
-	pushl_cfi_reg esi
-	pushl_cfi_reg edx
-	pushl_cfi_reg ecx
-	pushl_cfi_reg ebx
+	pushl %eax
+	pushl %ebp
+	pushl %edi
+	pushl %esi
+	pushl %edx
+	pushl %ecx
+	pushl %ebx
 	.endm
 
 	.macro RESTORE_ALL
-	popl_cfi_reg ebx
-	popl_cfi_reg ecx
-	popl_cfi_reg edx
-	popl_cfi_reg esi
-	popl_cfi_reg edi
-	popl_cfi_reg ebp
-	popl_cfi_reg eax
+	popl %ebx
+	popl %ecx
+	popl %edx
+	popl %esi
+	popl %edi
+	popl %ebp
+	popl %eax
 	.endm
 
 #endif /* CONFIG_X86_64 */

arch/x86/kernel/syscall_32.c → arch/x86/entry/syscall_32.c

@@ -10,7 +10,7 @@
 #else
 #define SYM(sym, compat) sym
 #define ia32_sys_call_table sys_call_table
-#define __NR_ia32_syscall_max __NR_syscall_max
+#define __NR_syscall_compat_max __NR_syscall_max
 #endif
 
 #define __SYSCALL_I386(nr, sym, compat) extern asmlinkage void SYM(sym, compat)(void) ;
@@ -23,11 +23,11 @@ typedef asmlinkage void (*sys_call_ptr_t)(void);
 
 extern asmlinkage void sys_ni_syscall(void);
 
-__visible const sys_call_ptr_t ia32_sys_call_table[__NR_ia32_syscall_max+1] = {
+__visible const sys_call_ptr_t ia32_sys_call_table[__NR_syscall_compat_max+1] = {
 	/*
 	 * Smells like a compiler bug -- it doesn't work
 	 * when the & below is removed.
 	 */
-	[0 ... __NR_ia32_syscall_max] = &sys_ni_syscall,
+	[0 ... __NR_syscall_compat_max] = &sys_ni_syscall,
 #include <asm/syscalls_32.h>
 };

arch/x86/syscalls/Makefile → arch/x86/entry/syscalls/Makefile

-out := $(obj)/../include/generated/asm
-uapi := $(obj)/../include/generated/uapi/asm
+out := $(obj)/../../include/generated/asm
+uapi := $(obj)/../../include/generated/uapi/asm
 
 # Create output directory if not already present
 _dummy := $(shell [ -d '$(out)' ] || mkdir -p '$(out)') \

arch/x86/lib/thunk_32.S → arch/x86/entry/thunk_32.S

@@ -6,16 +6,14 @@
  */
 	#include <linux/linkage.h>
 	#include <asm/asm.h>
-	#include <asm/dwarf2.h>
 
 	/* put return address in eax (arg1) */
 	.macro THUNK name, func, put_ret_addr_in_eax=0
 	.globl \name
 \name:
-	CFI_STARTPROC
-	pushl_cfi_reg eax
-	pushl_cfi_reg ecx
-	pushl_cfi_reg edx
+	pushl %eax
+	pushl %ecx
+	pushl %edx
 
 	.if \put_ret_addr_in_eax
 	/* Place EIP in the arg1 */
@@ -23,11 +21,10 @@
 	.endif
 
 	call \func
-	popl_cfi_reg edx
-	popl_cfi_reg ecx
-	popl_cfi_reg eax
+	popl %edx
+	popl %ecx
+	popl %eax
 	ret
-	CFI_ENDPROC
 	_ASM_NOKPROBE(\name)
 	.endm
 

arch/x86/lib/thunk_64.S → arch/x86/entry/thunk_64.S

@@ -6,35 +6,32 @@
  * Subject to the GNU public license, v.2. No warranty of any kind.
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/calling.h>
+#include "calling.h"
 #include <asm/asm.h>
 
 	/* rdi:	arg1 ... normal C conventions. rax is saved/restored. */
 	.macro THUNK name, func, put_ret_addr_in_rdi=0
 	.globl \name
 \name:
-	CFI_STARTPROC
 
 	/* this one pushes 9 elems, the next one would be %rIP */
-	pushq_cfi_reg rdi
-	pushq_cfi_reg rsi
-	pushq_cfi_reg rdx
-	pushq_cfi_reg rcx
-	pushq_cfi_reg rax
-	pushq_cfi_reg r8
-	pushq_cfi_reg r9
-	pushq_cfi_reg r10
-	pushq_cfi_reg r11
+	pushq %rdi
+	pushq %rsi
+	pushq %rdx
+	pushq %rcx
+	pushq %rax
+	pushq %r8
+	pushq %r9
+	pushq %r10
+	pushq %r11
 
 	.if \put_ret_addr_in_rdi
 	/* 9*8(%rsp) is return addr on stack */
-	movq_cfi_restore 9*8, rdi
+	movq 9*8(%rsp), %rdi
 	.endif
 
 	call \func
 	jmp  restore
-	CFI_ENDPROC
 	_ASM_NOKPROBE(\name)
 	.endm
 
@@ -55,19 +52,16 @@
 #if defined(CONFIG_TRACE_IRQFLAGS) \
  || defined(CONFIG_DEBUG_LOCK_ALLOC) \
  || defined(CONFIG_PREEMPT)
-	CFI_STARTPROC
-	CFI_ADJUST_CFA_OFFSET 9*8
 restore:
-	popq_cfi_reg r11
-	popq_cfi_reg r10
-	popq_cfi_reg r9
-	popq_cfi_reg r8
-	popq_cfi_reg rax
-	popq_cfi_reg rcx
-	popq_cfi_reg rdx
-	popq_cfi_reg rsi
-	popq_cfi_reg rdi
+	popq %r11
+	popq %r10
+	popq %r9
+	popq %r8
+	popq %rax
+	popq %rcx
+	popq %rdx
+	popq %rsi
+	popq %rdi
 	ret
-	CFI_ENDPROC
 	_ASM_NOKPROBE(restore)
 #endif

arch/x86/entry/vsyscall/Makefile

+#
+# Makefile for the x86 low level vsyscall code
+#
+obj-y					:= vsyscall_gtod.o
+
+obj-$(CONFIG_X86_VSYSCALL_EMULATION)	+= vsyscall_64.o vsyscall_emu_64.o
+

arch/x86/kernel/vsyscall_trace.h → arch/x86/entry/vsyscall/vsyscall_trace.h

@@ -24,6 +24,6 @@ TRACE_EVENT(emulate_vsyscall,
 #endif
 
 #undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH ../../arch/x86/kernel
+#define TRACE_INCLUDE_PATH ../../arch/x86/entry/vsyscall/
 #define TRACE_INCLUDE_FILE vsyscall_trace
 #include <trace/define_trace.h>

arch/x86/ia32/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the ia32 kernel emulation subsystem.
 #
 
-obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o
+obj-$(CONFIG_IA32_EMULATION) := sys_ia32.o ia32_signal.o
 
 obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
 

arch/x86/include/asm/alternative-asm.h

@@ -18,6 +18,12 @@
 	.endm
 #endif
 
+/*
+ * Issue one struct alt_instr descriptor entry (need to put it into
+ * the section .altinstructions, see below). This entry contains
+ * enough information for the alternatives patching code to patch an
+ * instruction. See apply_alternatives().
+ */
 .macro altinstruction_entry orig alt feature orig_len alt_len pad_len
 	.long \orig - .
 	.long \alt - .
@@ -27,6 +33,12 @@
 	.byte \pad_len
 .endm
 
+/*
+ * Define an alternative between two instructions. If @feature is
+ * present, early code in apply_alternatives() replaces @oldinstr with
+ * @newinstr. ".skip" directive takes care of proper instruction padding
+ * in case @newinstr is longer than @oldinstr.
+ */
 .macro ALTERNATIVE oldinstr, newinstr, feature
 140:
 	\oldinstr
@@ -55,6 +67,12 @@
  */
 #define alt_max_short(a, b)	((a) ^ (((a) ^ (b)) & -(-((a) < (b)))))
 
+
+/*
+ * Same as ALTERNATIVE macro above but for two alternatives. If CPU
+ * has @feature1, it replaces @oldinstr with @newinstr1. If CPU has
+ * @feature2, it replaces @oldinstr with @feature2.
+ */
 .macro ALTERNATIVE_2 oldinstr, newinstr1, feature1, newinstr2, feature2
 140:
 	\oldinstr

arch/x86/include/asm/apic.h

@@ -644,6 +644,12 @@ static inline void entering_ack_irq(void)
 	entering_irq();
 }
 
+static inline void ipi_entering_ack_irq(void)
+{
+	ack_APIC_irq();
+	irq_enter();
+}
+
 static inline void exiting_irq(void)
 {
 	irq_exit();

arch/x86/include/asm/asm.h

@@ -63,6 +63,31 @@
 	_ASM_ALIGN ;						\
 	_ASM_PTR (entry);					\
 	.popsection
+
+.macro ALIGN_DESTINATION
+	/* check for bad alignment of destination */
+	movl %edi,%ecx
+	andl $7,%ecx
+	jz 102f				/* already aligned */
+	subl $8,%ecx
+	negl %ecx
+	subl %ecx,%edx
+100:	movb (%rsi),%al
+101:	movb %al,(%rdi)
+	incq %rsi
+	incq %rdi
+	decl %ecx
+	jnz 100b
+102:
+	.section .fixup,"ax"
+103:	addl %ecx,%edx			/* ecx is zerorest also */
+	jmp copy_user_handle_tail
+	.previous
+
+	_ASM_EXTABLE(100b,103b)
+	_ASM_EXTABLE(101b,103b)
+	.endm
+
 #else
 # define _ASM_EXTABLE(from,to)					\
 	" .pushsection \"__ex_table\",\"a\"\n"			\

arch/x86/include/asm/atomic.h

@@ -22,7 +22,7 @@
  *
  * Atomically reads the value of @v.
  */
-static inline int atomic_read(const atomic_t *v)
+static __always_inline int atomic_read(const atomic_t *v)
 {
 	return ACCESS_ONCE((v)->counter);
 }
@@ -34,7 +34,7 @@ static inline int atomic_read(const atomic_t *v)
  *
  * Atomically sets the value of @v to @i.
  */
-static inline void atomic_set(atomic_t *v, int i)
+static __always_inline void atomic_set(atomic_t *v, int i)
 {
 	v->counter = i;
 }
@@ -46,7 +46,7 @@ static inline void atomic_set(atomic_t *v, int i)
  *
  * Atomically adds @i to @v.
  */
-static inline void atomic_add(int i, atomic_t *v)
+static __always_inline void atomic_add(int i, atomic_t *v)
 {
 	asm volatile(LOCK_PREFIX "addl %1,%0"
 		     : "+m" (v->counter)
@@ -60,7 +60,7 @@ static inline void atomic_add(int i, atomic_t *v)
  *
  * Atomically subtracts @i from @v.
  */
-static inline void atomic_sub(int i, atomic_t *v)
+static __always_inline void atomic_sub(int i, atomic_t *v)
 {
 	asm volatile(LOCK_PREFIX "subl %1,%0"
 		     : "+m" (v->counter)
@@ -76,7 +76,7 @@ static inline void atomic_sub(int i, atomic_t *v)
  * true if the result is zero, or false for all
  * other cases.
  */
-static inline int atomic_sub_and_test(int i, atomic_t *v)
+static __always_inline int atomic_sub_and_test(int i, atomic_t *v)
 {
 	GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, "er", i, "%0", "e");
 }
@@ -87,7 +87,7 @@ static inline int atomic_sub_and_test(int i, atomic_t *v)
  *
  * Atomically increments @v by 1.
  */
-static inline void atomic_inc(atomic_t *v)
+static __always_inline void atomic_inc(atomic_t *v)
 {
 	asm volatile(LOCK_PREFIX "incl %0"
 		     : "+m" (v->counter));
@@ -99,7 +99,7 @@ static inline void atomic_inc(atomic_t *v)
  *
  * Atomically decrements @v by 1.
  */
-static inline void atomic_dec(atomic_t *v)
+static __always_inline void atomic_dec(atomic_t *v)
 {
 	asm volatile(LOCK_PREFIX "decl %0"
 		     : "+m" (v->counter));
@@ -113,7 +113,7 @@ static inline void atomic_dec(atomic_t *v)
  * returns true if the result is 0, or false for all other
  * cases.
  */
-static inline int atomic_dec_and_test(atomic_t *v)
+static __always_inline int atomic_dec_and_test(atomic_t *v)
 {
 	GEN_UNARY_RMWcc(LOCK_PREFIX "decl", v->counter, "%0", "e");
 }
@@ -126,7 +126,7 @@ static inline int atomic_dec_and_test(atomic_t *v)
  * and returns true if the result is zero, or false for all
  * other cases.
  */
-static inline int atomic_inc_and_test(atomic_t *v)
+static __always_inline int atomic_inc_and_test(atomic_t *v)
 {
 	GEN_UNARY_RMWcc(LOCK_PREFIX "incl", v->counter, "%0", "e");
 }
@@ -140,7 +140,7 @@ static inline int atomic_inc_and_test(atomic_t *v)
  * if the result is negative, or false when
  * result is greater than or equal to zero.
  */
-static inline int atomic_add_negative(int i, atomic_t *v)
+static __always_inline int atomic_add_negative(int i, atomic_t *v)
 {
 	GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, "er", i, "%0", "s");
 }
@@ -152,7 +152,7 @@ static inline int atomic_add_negative(int i, atomic_t *v)
  *
  * Atomically adds @i to @v and returns @i + @v
  */
-static inline int atomic_add_return(int i, atomic_t *v)
+static __always_inline int atomic_add_return(int i, atomic_t *v)
 {
 	return i + xadd(&v->counter, i);
 }
@@ -164,7 +164,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
  *
  * Atomically subtracts @i from @v and returns @v - @i
  */
-static inline int atomic_sub_return(int i, atomic_t *v)
+static __always_inline int atomic_sub_return(int i, atomic_t *v)
 {
 	return atomic_add_return(-i, v);
 }
@@ -172,7 +172,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 #define atomic_inc_return(v)  (atomic_add_return(1, v))
 #define atomic_dec_return(v)  (atomic_sub_return(1, v))
 
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+static __always_inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 {
 	return cmpxchg(&v->counter, old, new);
 }
@@ -191,7 +191,7 @@ static inline int atomic_xchg(atomic_t *v, int new)
  * Atomically adds @a to @v, so long as @v was not already @u.
  * Returns the old value of @v.
  */
-static inline int __atomic_add_unless(atomic_t *v, int a, int u)
+static __always_inline int __atomic_add_unless(atomic_t *v, int a, int u)
 {
 	int c, old;
 	c = atomic_read(v);
@@ -213,7 +213,7 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
  * Atomically adds 1 to @v
  * Returns the new value of @u
  */
-static inline short int atomic_inc_short(short int *v)
+static __always_inline short int atomic_inc_short(short int *v)
 {
 	asm(LOCK_PREFIX "addw $1, %0" : "+m" (*v));
 	return *v;

arch/x86/include/asm/atomic64_64.h

@@ -40,7 +40,7 @@ static inline void atomic64_set(atomic64_t *v, long i)
  *
  * Atomically adds @i to @v.
  */
-static inline void atomic64_add(long i, atomic64_t *v)
+static __always_inline void atomic64_add(long i, atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "addq %1,%0"
 		     : "=m" (v->counter)
@@ -81,7 +81,7 @@ static inline int atomic64_sub_and_test(long i, atomic64_t *v)
  *
  * Atomically increments @v by 1.
  */
-static inline void atomic64_inc(atomic64_t *v)
+static __always_inline void atomic64_inc(atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "incq %0"
 		     : "=m" (v->counter)
@@ -94,7 +94,7 @@ static inline void atomic64_inc(atomic64_t *v)
  *
  * Atomically decrements @v by 1.
  */
-static inline void atomic64_dec(atomic64_t *v)
+static __always_inline void atomic64_dec(atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "decq %0"
 		     : "=m" (v->counter)
@@ -148,7 +148,7 @@ static inline int atomic64_add_negative(long i, atomic64_t *v)
  *
  * Atomically adds @i to @v and returns @i + @v
  */
-static inline long atomic64_add_return(long i, atomic64_t *v)
+static __always_inline long atomic64_add_return(long i, atomic64_t *v)
 {
 	return i + xadd(&v->counter, i);
 }

arch/x86/include/asm/entry_arch.h

@@ -23,6 +23,8 @@ BUILD_INTERRUPT(x86_platform_ipi, X86_PLATFORM_IPI_VECTOR)
 #ifdef CONFIG_HAVE_KVM
 BUILD_INTERRUPT3(kvm_posted_intr_ipi, POSTED_INTR_VECTOR,
 		 smp_kvm_posted_intr_ipi)
+BUILD_INTERRUPT3(kvm_posted_intr_wakeup_ipi, POSTED_INTR_WAKEUP_VECTOR,
+		 smp_kvm_posted_intr_wakeup_ipi)
 #endif
 
 /*
@@ -50,4 +52,7 @@ BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
 BUILD_INTERRUPT(threshold_interrupt,THRESHOLD_APIC_VECTOR)
 #endif
 
+#ifdef CONFIG_X86_MCE_AMD
+BUILD_INTERRUPT(deferred_error_interrupt, DEFERRED_ERROR_VECTOR)
+#endif
 #endif