提交 d6255529 编写于 作者: L Linus Walleij 提交者: Samuel Ortiz

mfd: Support AB9540 ab8500 variant

The AB9540 variant of the AB8500 is basically close enough
to use the same driver. This adds the new registers and
deviations for this new chip variant.
Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NMaxime Coquelin <maxime.coquelin@stericsson.com>
Signed-off-by: NAlex Macro <alex.macro@stericsson.com>
Signed-off-by: NMichel Jaouen <michel.jaouen@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
上级 2ced445e
......@@ -13,7 +13,7 @@
#define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START
#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \
+ AB8500_NR_IRQS)
+ AB8500_MAX_NR_IRQS)
/* TC35892 */
#define TC35892_NR_INTERNAL_IRQS 8
......
......@@ -32,6 +32,7 @@
#define AB8500_IT_SOURCE6_REG 0x05
#define AB8500_IT_SOURCE7_REG 0x06
#define AB8500_IT_SOURCE8_REG 0x07
#define AB9540_IT_SOURCE13_REG 0x0C
#define AB8500_IT_SOURCE19_REG 0x12
#define AB8500_IT_SOURCE20_REG 0x13
#define AB8500_IT_SOURCE21_REG 0x14
......@@ -53,6 +54,7 @@
#define AB8500_IT_LATCH9_REG 0x28
#define AB8500_IT_LATCH10_REG 0x29
#define AB8500_IT_LATCH12_REG 0x2B
#define AB9540_IT_LATCH13_REG 0x2C
#define AB8500_IT_LATCH19_REG 0x32
#define AB8500_IT_LATCH20_REG 0x33
#define AB8500_IT_LATCH21_REG 0x34
......@@ -95,6 +97,9 @@
#define AB8500_TURN_ON_STATUS 0x00
#define AB9540_MODEM_CTRL2_REG 0x23
#define AB9540_MODEM_CTRL2_SWDBBRSTN_BIT BIT(2)
/*
* Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
* numbers are indexed into this array with (num / 8). The interupts are
......@@ -108,6 +113,11 @@ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = {
0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21,
};
/* AB9540 support */
static const int ab9540_irq_regoffset[AB9540_NUM_IRQ_REGS] = {
0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24,
};
static const char ab8500_version_str[][7] = {
[AB8500_VERSION_AB8500] = "AB8500",
[AB8500_VERSION_AB8505] = "AB8505",
......@@ -354,7 +364,10 @@ static int ab8500_irq_init(struct ab8500 *ab8500)
int irq;
int num_irqs;
num_irqs = AB8500_NR_IRQS;
if (is_ab9540(ab8500))
num_irqs = AB9540_NR_IRQS;
else
num_irqs = AB8500_NR_IRQS;
for (irq = base; irq < base + num_irqs; irq++) {
irq_set_chip_data(irq, ab8500);
......@@ -377,7 +390,10 @@ static void ab8500_irq_remove(struct ab8500 *ab8500)
int irq;
int num_irqs;
num_irqs = AB8500_NR_IRQS;
if (is_ab9540(ab8500))
num_irqs = AB9540_NR_IRQS;
else
num_irqs = AB8500_NR_IRQS;
for (irq = base; irq < base + num_irqs; irq++) {
#ifdef CONFIG_ARM
......@@ -388,6 +404,7 @@ static void ab8500_irq_remove(struct ab8500 *ab8500)
}
}
/* AB8500 GPIO Resources */
static struct resource __devinitdata ab8500_gpio_resources[] = {
{
.name = "GPIO_INT6",
......@@ -397,6 +414,28 @@ static struct resource __devinitdata ab8500_gpio_resources[] = {
}
};
/* AB9540 GPIO Resources */
static struct resource __devinitdata ab9540_gpio_resources[] = {
{
.name = "GPIO_INT6",
.start = AB8500_INT_GPIO6R,
.end = AB8500_INT_GPIO41F,
.flags = IORESOURCE_IRQ,
},
{
.name = "GPIO_INT14",
.start = AB9540_INT_GPIO50R,
.end = AB9540_INT_GPIO54R,
.flags = IORESOURCE_IRQ,
},
{
.name = "GPIO_INT15",
.start = AB9540_INT_GPIO50F,
.end = AB9540_INT_GPIO54F,
.flags = IORESOURCE_IRQ,
}
};
static struct resource __devinitdata ab8500_gpadc_resources[] = {
{
.name = "HW_CONV_END",
......@@ -713,7 +752,7 @@ static struct resource __devinitdata ab8500_temp_resources[] = {
},
};
static struct mfd_cell __devinitdata ab8500_devs[] = {
static struct mfd_cell __devinitdata abx500_common_devs[] = {
#ifdef CONFIG_DEBUG_FS
{
.name = "ab8500-debug",
......@@ -727,11 +766,6 @@ static struct mfd_cell __devinitdata ab8500_devs[] = {
{
.name = "ab8500-regulator",
},
{
.name = "ab8500-gpio",
.num_resources = ARRAY_SIZE(ab8500_gpio_resources),
.resources = ab8500_gpio_resources,
},
{
.name = "ab8500-gpadc",
.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
......@@ -770,11 +804,7 @@ static struct mfd_cell __devinitdata ab8500_devs[] = {
{
.name = "ab8500-codec",
},
{
.name = "ab8500-usb",
.num_resources = ARRAY_SIZE(ab8500_usb_resources),
.resources = ab8500_usb_resources,
},
{
.name = "ab8500-poweron-key",
.num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
......@@ -803,6 +833,32 @@ static struct mfd_cell __devinitdata ab8500_devs[] = {
},
};
static struct mfd_cell __devinitdata ab8500_devs[] = {
{
.name = "ab8500-gpio",
.num_resources = ARRAY_SIZE(ab8500_gpio_resources),
.resources = ab8500_gpio_resources,
},
{
.name = "ab8500-usb",
.num_resources = ARRAY_SIZE(ab8500_usb_resources),
.resources = ab8500_usb_resources,
},
};
static struct mfd_cell __devinitdata ab9540_devs[] = {
{
.name = "ab8500-gpio",
.num_resources = ARRAY_SIZE(ab9540_gpio_resources),
.resources = ab9540_gpio_resources,
},
{
.name = "ab9540-usb",
.num_resources = ARRAY_SIZE(ab8500_usb_resources),
.resources = ab8500_usb_resources,
},
};
static ssize_t show_chip_id(struct device *dev,
struct device_attribute *attr, char *buf)
{
......@@ -864,9 +920,64 @@ static ssize_t show_turn_on_status(struct device *dev,
return sprintf(buf, "%#x\n", value);
}
static ssize_t show_ab9540_dbbrstn(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ab8500 *ab8500;
int ret;
u8 value;
ab8500 = dev_get_drvdata(dev);
ret = get_register_interruptible(ab8500, AB8500_REGU_CTRL2,
AB9540_MODEM_CTRL2_REG, &value);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n",
(value & AB9540_MODEM_CTRL2_SWDBBRSTN_BIT) ? 1 : 0);
}
static ssize_t store_ab9540_dbbrstn(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct ab8500 *ab8500;
int ret = count;
int err;
u8 bitvalues;
ab8500 = dev_get_drvdata(dev);
if (count > 0) {
switch (buf[0]) {
case '0':
bitvalues = 0;
break;
case '1':
bitvalues = AB9540_MODEM_CTRL2_SWDBBRSTN_BIT;
break;
default:
goto exit;
}
err = mask_and_set_register_interruptible(ab8500,
AB8500_REGU_CTRL2, AB9540_MODEM_CTRL2_REG,
AB9540_MODEM_CTRL2_SWDBBRSTN_BIT, bitvalues);
if (err)
dev_info(ab8500->dev,
"Failed to set DBBRSTN %c, err %#x\n",
buf[0], err);
}
exit:
return ret;
}
static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL);
static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL);
static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL);
static DEVICE_ATTR(dbbrstn, S_IRUGO | S_IWUSR,
show_ab9540_dbbrstn, store_ab9540_dbbrstn);
static struct attribute *ab8500_sysfs_entries[] = {
&dev_attr_chip_id.attr,
......@@ -875,10 +986,22 @@ static struct attribute *ab8500_sysfs_entries[] = {
NULL,
};
static struct attribute *ab9540_sysfs_entries[] = {
&dev_attr_chip_id.attr,
&dev_attr_switch_off_status.attr,
&dev_attr_turn_on_status.attr,
&dev_attr_dbbrstn.attr,
NULL,
};
static struct attribute_group ab8500_attr_group = {
.attrs = ab8500_sysfs_entries,
};
static struct attribute_group ab9540_attr_group = {
.attrs = ab9540_sysfs_entries,
};
int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version)
{
struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev);
......@@ -915,8 +1038,14 @@ int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version)
ab8500->chip_id >> 4,
ab8500->chip_id & 0x0F);
ab8500->mask_size = AB8500_NUM_IRQ_REGS;
ab8500->irq_reg_offset = ab8500_irq_regoffset;
/* Configure AB8500 or AB9540 IRQ */
if (is_ab9540(ab8500)) {
ab8500->mask_size = AB9540_NUM_IRQ_REGS;
ab8500->irq_reg_offset = ab9540_irq_regoffset;
} else {
ab8500->mask_size = AB8500_NUM_IRQ_REGS;
ab8500->irq_reg_offset = ab8500_irq_regoffset;
}
ab8500->mask = kzalloc(ab8500->mask_size, GFP_KERNEL);
if (!ab8500->mask)
return -ENOMEM;
......@@ -982,17 +1111,34 @@ int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version)
goto out_removeirq;
}
ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
ARRAY_SIZE(ab8500_devs), NULL,
ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs,
ARRAY_SIZE(abx500_common_devs), NULL,
ab8500->irq_base);
if (ret)
goto out_freeirq;
if (is_ab9540(ab8500))
ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
ARRAY_SIZE(ab9540_devs), NULL,
ab8500->irq_base);
else
ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
ARRAY_SIZE(ab9540_devs), NULL,
ab8500->irq_base);
if (ret)
goto out_freeirq;
ret = sysfs_create_group(&ab8500->dev->kobj, &ab8500_attr_group);
if (is_ab9540(ab8500))
ret = sysfs_create_group(&ab8500->dev->kobj,
&ab9540_attr_group);
else
ret = sysfs_create_group(&ab8500->dev->kobj,
&ab8500_attr_group);
if (ret)
dev_err(ab8500->dev, "error creating sysfs entries\n");
return ret;
else
return ret;
out_freeirq:
if (ab8500->irq_base)
......@@ -1010,7 +1156,10 @@ int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version)
int __devexit ab8500_exit(struct ab8500 *ab8500)
{
sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group);
if (is_ab9540(ab8500))
sysfs_remove_group(&ab8500->dev->kobj, &ab9540_attr_group);
else
sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group);
mfd_remove_devices(ab8500->dev);
if (ab8500->irq_base) {
free_irq(ab8500->irq, ab8500);
......
......@@ -10,12 +10,14 @@
/*
* Platform data to register a block: only the initial gpio/irq number.
* Array sizes are large enough to contain all AB8500 and AB9540 GPIO
* registers.
*/
struct ab8500_gpio_platform_data {
int gpio_base;
u32 irq_base;
u8 config_reg[7];
u8 config_reg[8];
};
#endif /* _AB8500_GPIO_H */
......@@ -71,6 +71,13 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
#define AB8500_SWATCTRL 0x230
#define AB8500_HIQCLKCTRL 0x232
#define AB8500_VSIMSYSCLKCTRL 0x233
#define AB9540_SYSCLK12BUFCTRL 0x234
#define AB9540_SYSCLK12CONFCTRL 0x235
#define AB9540_SYSCLK12BUFCTRL2 0x236
#define AB9540_SYSCLK12BUF1VALID 0x237
#define AB9540_SYSCLK12BUF2VALID 0x238
#define AB9540_SYSCLK12BUF3VALID 0x239
#define AB9540_SYSCLK12BUF4VALID 0x23A
/* Bits */
#define AB8500_TURNONSTATUS_PORNVBAT BIT(0)
......@@ -251,4 +258,40 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6)
#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7)
#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1ENA BIT(0)
#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2ENA BIT(1)
#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3ENA BIT(2)
#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4ENA BIT(3)
#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFENA_MASK 0x0F
#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1STRE BIT(4)
#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2STRE BIT(5)
#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3STRE BIT(6)
#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4STRE BIT(7)
#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFSTRE_MASK 0xF0
#define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0)
#define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1)
#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_MASK 0x0C
#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_SHIFT 2
#define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4)
#define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5)
#define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6)
#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF1PDENA BIT(0)
#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF2PDENA BIT(1)
#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF3PDENA BIT(2)
#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF4PDENA BIT(3)
#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_MASK 0xFF
#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_SHIFT 0
#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_MASK 0xFF
#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_SHIFT 0
#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_MASK 0xFF
#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_SHIFT 0
#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF
#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0
#endif /* __AB8500_SYSCTRL_H */
......@@ -57,8 +57,11 @@ enum ab8500_version {
/*
* Interrupts
* Values used to index into array ab8500_irq_regoffset[] defined in
* drivers/mdf/ab8500-core.c
*/
/* Definitions for AB8500 and AB9540 */
/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */
#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0
#define AB8500_INT_UN_PLUG_TV_DET 1
#define AB8500_INT_PLUG_TV_DET 2
......@@ -67,6 +70,7 @@ enum ab8500_version {
#define AB8500_INT_PON_KEY2DB_R 5
#define AB8500_INT_PON_KEY1DB_F 6
#define AB8500_INT_PON_KEY1DB_R 7
/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */
#define AB8500_INT_BATT_OVV 8
#define AB8500_INT_MAIN_CH_UNPLUG_DET 10
#define AB8500_INT_MAIN_CH_PLUG_DET 11
......@@ -74,6 +78,7 @@ enum ab8500_version {
#define AB8500_INT_USB_ID_DET_R 13
#define AB8500_INT_VBUS_DET_F 14
#define AB8500_INT_VBUS_DET_R 15
/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */
#define AB8500_INT_VBUS_CH_DROP_END 16
#define AB8500_INT_RTC_60S 17
#define AB8500_INT_RTC_ALARM 18
......@@ -81,6 +86,7 @@ enum ab8500_version {
#define AB8500_INT_CH_WD_EXP 21
#define AB8500_INT_VBUS_OVV 22
#define AB8500_INT_MAIN_CH_DROP_END 23
/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */
#define AB8500_INT_CCN_CONV_ACC 24
#define AB8500_INT_INT_AUD 25
#define AB8500_INT_CCEOC 26
......@@ -89,6 +95,7 @@ enum ab8500_version {
#define AB8500_INT_LOW_BAT_R 29
#define AB8500_INT_BUP_CHG_NOT_OK 30
#define AB8500_INT_BUP_CHG_OK 31
/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */
#define AB8500_INT_GP_HW_ADC_CONV_END 32
#define AB8500_INT_ACC_DETECT_1DB_F 33
#define AB8500_INT_ACC_DETECT_1DB_R 34
......@@ -97,6 +104,7 @@ enum ab8500_version {
#define AB8500_INT_ACC_DETECT_21DB_F 37
#define AB8500_INT_ACC_DETECT_21DB_R 38
#define AB8500_INT_GP_SW_ADC_CONV_END 39
/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */
#define AB8500_INT_GPIO6R 40
#define AB8500_INT_GPIO7R 41
#define AB8500_INT_GPIO8R 42
......@@ -105,6 +113,7 @@ enum ab8500_version {
#define AB8500_INT_GPIO11R 45
#define AB8500_INT_GPIO12R 46
#define AB8500_INT_GPIO13R 47
/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */
#define AB8500_INT_GPIO24R 48
#define AB8500_INT_GPIO25R 49
#define AB8500_INT_GPIO36R 50
......@@ -113,6 +122,7 @@ enum ab8500_version {
#define AB8500_INT_GPIO39R 53
#define AB8500_INT_GPIO40R 54
#define AB8500_INT_GPIO41R 55
/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */
#define AB8500_INT_GPIO6F 56
#define AB8500_INT_GPIO7F 57
#define AB8500_INT_GPIO8F 58
......@@ -121,6 +131,7 @@ enum ab8500_version {
#define AB8500_INT_GPIO11F 61
#define AB8500_INT_GPIO12F 62
#define AB8500_INT_GPIO13F 63
/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */
#define AB8500_INT_GPIO24F 64
#define AB8500_INT_GPIO25F 65
#define AB8500_INT_GPIO36F 66
......@@ -129,6 +140,7 @@ enum ab8500_version {
#define AB8500_INT_GPIO39F 69
#define AB8500_INT_GPIO40F 70
#define AB8500_INT_GPIO41F 71
/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */
#define AB8500_INT_ADP_SOURCE_ERROR 72
#define AB8500_INT_ADP_SINK_ERROR 73
#define AB8500_INT_ADP_PROBE_PLUG 74
......@@ -136,30 +148,62 @@ enum ab8500_version {
#define AB8500_INT_ADP_SENSE_OFF 76
#define AB8500_INT_USB_PHY_POWER_ERR 78
#define AB8500_INT_USB_LINK_STATUS 79
/* ab8500_irq_regoffset[10] -> IT[Source|Latch|Mask]19 */
#define AB8500_INT_BTEMP_LOW 80
#define AB8500_INT_BTEMP_LOW_MEDIUM 81
#define AB8500_INT_BTEMP_MEDIUM_HIGH 82
#define AB8500_INT_BTEMP_HIGH 83
/* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */
#define AB8500_INT_USB_CHARGER_NOT_OK 89
#define AB8500_INT_ID_WAKEUP_R 90
#define AB8500_INT_ID_DET_R1R 92
#define AB8500_INT_ID_DET_R2R 93
#define AB8500_INT_ID_DET_R3R 94
#define AB8500_INT_ID_DET_R4R 95
/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */
#define AB8500_INT_ID_WAKEUP_F 96
#define AB8500_INT_ID_DET_R1F 98
#define AB8500_INT_ID_DET_R2F 99
#define AB8500_INT_ID_DET_R3F 100
#define AB8500_INT_ID_DET_R4F 101
#define AB8500_INT_USB_CHG_DET_DONE 102
/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */
#define AB8500_INT_USB_CH_TH_PROT_F 104
#define AB8500_INT_USB_CH_TH_PROT_R 105
#define AB8500_INT_MAIN_CH_TH_PROT_F 106
#define AB8500_INT_MAIN_CH_TH_PROT_R 107
#define AB8500_INT_USB_CHARGER_NOT_OKF 111
/* Definitions for AB9540 */
/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */
#define AB9540_INT_GPIO50R 113
#define AB9540_INT_GPIO51R 114
#define AB9540_INT_GPIO52R 115
#define AB9540_INT_GPIO53R 116
#define AB9540_INT_GPIO54R 117
#define AB9540_INT_IEXT_CH_RF_BFN_R 118
#define AB9540_INT_IEXT_CH_RF_BFN_F 119
/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */
#define AB9540_INT_GPIO50F 121
#define AB9540_INT_GPIO51F 122
#define AB9540_INT_GPIO52F 123
#define AB9540_INT_GPIO53F 124
#define AB9540_INT_GPIO54F 125
/*
* AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the
* entire platform. This is a "compile time" constant so this must be set to
* the largest possible value that may be encountered with different AB SOCs.
* Of the currently supported AB devices, AB8500 and AB9540, it is the AB9540
* which is larger.
*/
#define AB8500_NR_IRQS 112
#define AB9540_NR_IRQS 128
/* This is set to the roof of any AB8500 chip variant IRQ counts */
#define AB8500_MAX_NR_IRQS AB9540_NR_IRQS
#define AB8500_NUM_IRQ_REGS 14
#define AB9540_NUM_IRQ_REGS 17
/**
* struct ab8500 - ab8500 internal structure
......
......@@ -26,7 +26,26 @@ enum ab8500_regulator_id {
AB8500_NUM_REGULATORS,
};
/* AB8500 register initialization */
/* AB9450 regulators */
enum ab9540_regulator_id {
AB9540_LDO_AUX1,
AB9540_LDO_AUX2,
AB9540_LDO_AUX3,
AB9540_LDO_AUX4,
AB9540_LDO_INTCORE,
AB9540_LDO_TVOUT,
AB9540_LDO_USB,
AB9540_LDO_AUDIO,
AB9540_LDO_ANAMIC1,
AB9540_LDO_ANAMIC2,
AB9540_LDO_DMIC,
AB9540_LDO_ANA,
AB9540_SYSCLKREQ_2,
AB9540_SYSCLKREQ_4,
AB9540_NUM_REGULATORS,
};
/* AB8500 and AB9540 register initialization */
struct ab8500_regulator_reg_init {
int id;
u8 value;
......@@ -71,4 +90,53 @@ enum ab8500_regulator_reg {
AB8500_NUM_REGULATOR_REGISTERS,
};
/* AB9540 registers */
enum ab9540_regulator_reg {
AB9540_REGUREQUESTCTRL1,
AB9540_REGUREQUESTCTRL2,
AB9540_REGUREQUESTCTRL3,
AB9540_REGUREQUESTCTRL4,
AB9540_REGUSYSCLKREQ1HPVALID1,
AB9540_REGUSYSCLKREQ1HPVALID2,
AB9540_REGUHWHPREQ1VALID1,
AB9540_REGUHWHPREQ1VALID2,
AB9540_REGUHWHPREQ2VALID1,
AB9540_REGUHWHPREQ2VALID2,
AB9540_REGUSWHPREQVALID1,
AB9540_REGUSWHPREQVALID2,
AB9540_REGUSYSCLKREQVALID1,
AB9540_REGUSYSCLKREQVALID2,
AB9540_REGUVAUX4REQVALID,
AB9540_REGUMISC1,
AB9540_VAUDIOSUPPLY,
AB9540_REGUCTRL1VAMIC,
AB9540_VSMPS1REGU,
AB9540_VSMPS2REGU,
AB9540_VSMPS3REGU, /* NOTE! PRCMU register */
AB9540_VPLLVANAREGU,
AB9540_EXTSUPPLYREGU,
AB9540_VAUX12REGU,
AB9540_VRF1VAUX3REGU,
AB9540_VSMPS1SEL1,
AB9540_VSMPS1SEL2,
AB9540_VSMPS1SEL3,
AB9540_VSMPS2SEL1,
AB9540_VSMPS2SEL2,
AB9540_VSMPS2SEL3,
AB9540_VSMPS3SEL1, /* NOTE! PRCMU register */
AB9540_VSMPS3SEL2, /* NOTE! PRCMU register */
AB9540_VAUX1SEL,
AB9540_VAUX2SEL,
AB9540_VRF1VAUX3SEL,
AB9540_REGUCTRL2SPARE,
AB9540_VAUX4REQCTRL,
AB9540_VAUX4REGU,
AB9540_VAUX4SEL,
AB9540_REGUCTRLDISCH,
AB9540_REGUCTRLDISCH2,
AB9540_REGUCTRLDISCH3,
AB9540_NUM_REGULATOR_REGISTERS,
};
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册