提交 d61bd77f 编写于 作者: K Kukjin Kim

Merge branch 'next-samsung' into for-next

Conflicts:
	arch/arm/mach-s5p6440/Kconfig
	arch/arm/mach-s5p6442/Kconfig
	arch/arm/mach-s5pc100/Kconfig
	arch/arm/mach-s5pv210/Kconfig
	arch/arm/mach-s5pv210/cpu.c
	arch/arm/plat-samsung/include/plat/sdhci.h
......@@ -6,31 +6,149 @@ Multi-touch (MT) Protocol
Introduction
------------
In order to utilize the full power of the new multi-touch devices, a way to
report detailed finger data to user space is needed. This document
describes the multi-touch (MT) protocol which allows kernel drivers to
report details for an arbitrary number of fingers.
In order to utilize the full power of the new multi-touch and multi-user
devices, a way to report detailed data from multiple contacts, i.e.,
objects in direct contact with the device surface, is needed. This
document describes the multi-touch (MT) protocol which allows kernel
drivers to report details for an arbitrary number of contacts.
The protocol is divided into two types, depending on the capabilities of the
hardware. For devices handling anonymous contacts (type A), the protocol
describes how to send the raw data for all contacts to the receiver. For
devices capable of tracking identifiable contacts (type B), the protocol
describes how to send updates for individual contacts via event slots.
Protocol Usage
--------------
Contact details are sent sequentially as separate packets of ABS_MT
events. Only the ABS_MT events are recognized as part of a contact
packet. Since these events are ignored by current single-touch (ST)
applications, the MT protocol can be implemented on top of the ST protocol
in an existing driver.
Drivers for type A devices separate contact packets by calling
input_mt_sync() at the end of each packet. This generates a SYN_MT_REPORT
event, which instructs the receiver to accept the data for the current
contact and prepare to receive another.
Drivers for type B devices separate contact packets by calling
input_mt_slot(), with a slot as argument, at the beginning of each packet.
This generates an ABS_MT_SLOT event, which instructs the receiver to
prepare for updates of the given slot.
All drivers mark the end of a multi-touch transfer by calling the usual
input_sync() function. This instructs the receiver to act upon events
accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new set
of events/packets.
The main difference between the stateless type A protocol and the stateful
type B slot protocol lies in the usage of identifiable contacts to reduce
the amount of data sent to userspace. The slot protocol requires the use of
the ABS_MT_TRACKING_ID, either provided by the hardware or computed from
the raw data [5].
For type A devices, the kernel driver should generate an arbitrary
enumeration of the full set of anonymous contacts currently on the
surface. The order in which the packets appear in the event stream is not
important. Event filtering and finger tracking is left to user space [3].
For type B devices, the kernel driver should associate a slot with each
identified contact, and use that slot to propagate changes for the contact.
Creation, replacement and destruction of contacts is achieved by modifying
the ABS_MT_TRACKING_ID of the associated slot. A non-negative tracking id
is interpreted as a contact, and the value -1 denotes an unused slot. A
tracking id not previously present is considered new, and a tracking id no
longer present is considered removed. Since only changes are propagated,
the full state of each initiated contact has to reside in the receiving
end. Upon receiving an MT event, one simply updates the appropriate
attribute of the current slot.
Protocol Example A
------------------
Here is what a minimal event sequence for a two-contact touch would look
like for a type A device:
ABS_MT_POSITION_X x[0]
ABS_MT_POSITION_Y y[0]
SYN_MT_REPORT
ABS_MT_POSITION_X x[1]
ABS_MT_POSITION_Y y[1]
SYN_MT_REPORT
SYN_REPORT
The sequence after moving one of the contacts looks exactly the same; the
raw data for all present contacts are sent between every synchronization
with SYN_REPORT.
Usage
-----
Here is the sequence after lifting the first contact:
ABS_MT_POSITION_X x[1]
ABS_MT_POSITION_Y y[1]
SYN_MT_REPORT
SYN_REPORT
And here is the sequence after lifting the second contact:
SYN_MT_REPORT
SYN_REPORT
If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the
ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the
last SYN_REPORT will be dropped by the input core, resulting in no
zero-contact event reaching userland.
Anonymous finger details are sent sequentially as separate packets of ABS
events. Only the ABS_MT events are recognized as part of a finger
packet. The end of a packet is marked by calling the input_mt_sync()
function, which generates a SYN_MT_REPORT event. This instructs the
receiver to accept the data for the current finger and prepare to receive
another. The end of a multi-touch transfer is marked by calling the usual
input_sync() function. This instructs the receiver to act upon events
accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
set of events/packets.
Protocol Example B
------------------
Here is what a minimal event sequence for a two-contact touch would look
like for a type B device:
ABS_MT_SLOT 0
ABS_MT_TRACKING_ID 45
ABS_MT_POSITION_X x[0]
ABS_MT_POSITION_Y y[0]
ABS_MT_SLOT 1
ABS_MT_TRACKING_ID 46
ABS_MT_POSITION_X x[1]
ABS_MT_POSITION_Y y[1]
SYN_REPORT
Here is the sequence after moving contact 45 in the x direction:
ABS_MT_SLOT 0
ABS_MT_POSITION_X x[0]
SYN_REPORT
Here is the sequence after lifting the contact in slot 0:
ABS_MT_TRACKING_ID -1
SYN_REPORT
The slot being modified is already 0, so the ABS_MT_SLOT is omitted. The
message removes the association of slot 0 with contact 45, thereby
destroying contact 45 and freeing slot 0 to be reused for another contact.
Finally, here is the sequence after lifting the second contact:
ABS_MT_SLOT 1
ABS_MT_TRACKING_ID -1
SYN_REPORT
Event Usage
-----------
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
allows for multiple fingers to be tracked. If the device supports it, the
allows for multiple contacts to be tracked. If the device supports it, the
ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
of the contact area and approaching finger, respectively.
of the contact area and approaching contact, respectively.
The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
looking through a window at someone gently holding a finger against the
......@@ -41,56 +159,26 @@ ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
against the glass. The inner region will increase, and in general, the
ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
unity, is related to the finger pressure. For pressure-based devices,
unity, is related to the contact pressure. For pressure-based devices,
ABS_MT_PRESSURE may be used to provide the pressure on the contact area
instead.
In addition to the MAJOR parameters, the oval shape of the finger can be
In addition to the MAJOR parameters, the oval shape of the contact can be
described by adding the MINOR parameters, such that MAJOR and MINOR are the
major and minor axis of an ellipse. Finally, the orientation of the oval
shape can be describe with the ORIENTATION parameter.
The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
finger or a pen or something else. Devices with more granular information
contact or a pen or something else. Devices with more granular information
may specify general shapes as blobs, i.e., as a sequence of rectangular
shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
that currently support it, the ABS_MT_TRACKING_ID event may be used to
report finger tracking from hardware [5].
report contact tracking from hardware [5].
Here is what a minimal event sequence for a two-finger touch would look
like:
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
SYN_REPORT
Here is the sequence after lifting one of the fingers:
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
SYN_REPORT
And here is the sequence after lifting the remaining finger:
SYN_MT_REPORT
SYN_REPORT
If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the
ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the
last SYN_REPORT will be dropped by the input core, resulting in no
zero-finger event reaching userland.
Event Semantics
---------------
The word "contact" is used to describe a tool which is in direct contact
with the surface. A finger, a pen or a rubber all classify as contacts.
ABS_MT_TOUCH_MAJOR
The length of the major axis of the contact. The length should be given in
......@@ -157,15 +245,16 @@ MT_TOOL_PEN [2].
ABS_MT_BLOB_ID
The BLOB_ID groups several packets together into one arbitrarily shaped
contact. This is a low-level anonymous grouping, and should not be confused
with the high-level trackingID [5]. Most kernel drivers will not have blob
capability, and can safely omit the event.
contact. This is a low-level anonymous grouping for type A devices, and
should not be confused with the high-level trackingID [5]. Most type A
devices do not have blob capability, so drivers can safely omit this event.
ABS_MT_TRACKING_ID
The TRACKING_ID identifies an initiated contact throughout its life cycle
[5]. There are currently only a few devices that support it, so this event
should normally be omitted.
[5]. This event is mandatory for type B devices. The value range of the
TRACKING_ID should be large enough to ensure unique identification of a
contact maintained over an extended period of time.
Event Computation
......@@ -192,20 +281,11 @@ finger along the X axis (1).
Finger Tracking
---------------
The kernel driver should generate an arbitrary enumeration of the set of
anonymous contacts currently on the surface. The order in which the packets
appear in the event stream is not important.
The process of finger tracking, i.e., to assign a unique trackingID to each
initiated contact on the surface, is left to user space; preferably the
multi-touch X driver [3]. In that driver, the trackingID stays the same and
unique until the contact vanishes (when the finger leaves the surface). The
problem of assigning a set of anonymous fingers to a set of identified
fingers is a euclidian bipartite matching problem at each event update, and
relies on a sufficiently rapid update rate.
There are a few devices that support trackingID in hardware. User space can
make use of these native identifiers to reduce bandwidth and cpu usage.
initiated contact on the surface, is a Euclidian Bipartite Matching
problem. At each event synchronization, the set of actual contacts is
matched to the set of contacts from the previous synchronization. A full
implementation can be found in [3].
Gestures
......
......@@ -634,6 +634,7 @@ config ARCH_S3C2410
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
......@@ -663,6 +664,8 @@ config ARCH_S3C64XX
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
select HAVE_S3C2410_I2C
select HAVE_S3C2410_WATCHDOG
help
Samsung S3C64XX series based systems
......@@ -671,7 +674,10 @@ config ARCH_S5P6440
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_WATCHDOG
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
help
Samsung S5P6440 CPU based systems
......@@ -681,6 +687,7 @@ config ARCH_S5P6442
select GENERIC_GPIO
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_WATCHDOG
help
Samsung S5P6442 CPU based systems
......@@ -691,6 +698,9 @@ config ARCH_S5PC100
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
select HAVE_S3C2410_WATCHDOG
help
Samsung S5PC100 series based systems
......@@ -701,6 +711,9 @@ config ARCH_S5PV210
select HAVE_CLK
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
select HAVE_S3C2410_WATCHDOG
help
Samsung S5PV210/S5PC110 series based systems
......
......@@ -57,11 +57,21 @@ config S3C64XX_SETUP_I2C1
help
Common setup code for i2c bus 1.
config S3C64XX_SETUP_IDE
bool
help
Common setup code for S3C64XX IDE.
config S3C64XX_SETUP_FB_24BPP
bool
help
Common setup code for S3C64XX with an 24bpp RGB display helper.
config S3C64XX_SETUP_KEYPAD
bool
help
Common setup code for S3C64XX KEYPAD GPIO configurations
config S3C64XX_SETUP_SDHCI_GPIO
bool
help
......@@ -95,15 +105,20 @@ config MACH_SMDK6410
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
select SAMSUNG_DEV_IDE
select S3C_DEV_FB
select S3C_DEV_RTC
select SAMSUNG_DEV_TS
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select SAMSUNG_DEV_KEYPAD
select HAVE_S3C2410_WATCHDOG
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
help
Machine support for the Samsung SMDK6410
......
......@@ -35,6 +35,8 @@ obj-$(CONFIG_S3C64XX_DMA) += dma.o
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
......
......@@ -132,6 +132,12 @@ static struct clk init_clocks_disable[] = {
.name = "nand",
.id = -1,
.parent = &clk_h,
}, {
.name = "rtc",
.id = -1,
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_RTC,
}, {
.name = "adc",
.id = -1,
......@@ -165,6 +171,12 @@ static struct clk init_clocks_disable[] = {
.ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
}, {
#endif
.name = "keypad",
.id = -1,
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_KEYPAD,
}, {
.name = "spi",
.id = 0,
.parent = &clk_p,
......@@ -294,12 +306,6 @@ static struct clk init_clocks[] = {
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_UART3,
}, {
.name = "rtc",
.id = -1,
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_RTC,
}, {
.name = "watchdog",
.id = -1,
......@@ -310,6 +316,12 @@ static struct clk init_clocks[] = {
.id = -1,
.parent = &clk_p,
.ctrlbit = S3C_CLKCON_PCLK_AC97,
}, {
.name = "cfcon",
.id = -1,
.parent = &clk_h,
.enable = s3c64xx_hclk_ctrl,
.ctrlbit = S3C_CLKCON_HCLK_IHOST,
}
};
......
......@@ -12,11 +12,11 @@
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/gpio.h>
#include <plat/devs.h>
#include <plat/audio.h>
......
......@@ -12,10 +12,10 @@
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/gpio.h>
#include <mach/gpio-bank-c.h>
#include <mach/spi-clocks.h>
......
......@@ -15,9 +15,9 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/map.h>
#include <mach/gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
......
......@@ -67,6 +67,7 @@
#define S3C64XX_PA_USB_HSOTG (0x7C000000)
#define S3C64XX_PA_WATCHDOG (0x7E004000)
#define S3C64XX_PA_RTC (0x7E005000)
#define S3C64XX_PA_KEYPAD (0x7E00A000)
#define S3C64XX_PA_ADC (0x7E00B000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
#define S3C64XX_PA_AC97 (0x7F001000)
......@@ -86,6 +87,9 @@
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
#define S3C64XX_PA_CFCON (0x70300000)
#define S3C64XX_PA_VIC0 (0x71200000)
#define S3C64XX_PA_VIC1 (0x71300000)
......@@ -120,5 +124,7 @@
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON
#define SAMSUNG_PA_KEYPAD S3C64XX_PA_KEYPAD
#endif /* __ASM_ARCH_6400_MAP_H */
......@@ -34,6 +34,7 @@
#define S3C_SCLK_GATE S3C_CLKREG(0x38)
#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
/* CLKDIV0 */
#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12)
......@@ -154,4 +155,8 @@
#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2)
#define S3C6400_CLKSRC_MFC (1 << 4)
/* MEM_SYS_CFG */
#define MEM_SYS_CFG_INDEP_CF 0x4000
#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
#endif /* _PLAT_REGS_CLOCK_H */
......@@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
......@@ -56,6 +57,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-sys.h>
#include <mach/regs-srom.h>
#include <plat/ata.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
......@@ -66,6 +68,7 @@
#include <plat/cpu.h>
#include <plat/adc.h>
#include <plat/ts.h>
#include <plat/keypad.h>
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
......@@ -242,6 +245,29 @@ static struct platform_device smdk6410_b_pwr_5v = {
};
#endif
static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
.setup_gpio = s3c64xx_ide_setup_gpio,
};
static uint32_t smdk6410_keymap[] __initdata = {
/* KEY(row, col, keycode) */
KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
};
static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
.keymap = smdk6410_keymap,
.keymap_size = ARRAY_SIZE(smdk6410_keymap),
};
static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
.keymap_data = &smdk6410_keymap_data,
.rows = 2,
.cols = 8,
};
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
......@@ -257,6 +283,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&s3c_device_ohci,
&s3c_device_usb_hsotg,
&s3c64xx_device_iisv4,
&samsung_device_keypad,
#ifdef CONFIG_REGULATOR
&smdk6410_b_pwr_5v,
......@@ -265,6 +292,8 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&smdk6410_smsc911x,
&s3c_device_adc,
&s3c_device_cfcon,
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_wdt,
};
......@@ -636,6 +665,8 @@ static void __init smdk6410_machine_init(void)
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
samsung_keypad_set_platdata(&smdk6410_keypad_data);
s3c24xx_ts_set_platdata(&s3c_ts_platform);
/* configure nCS1 width to 16 bits */
......@@ -665,6 +696,8 @@ static void __init smdk6410_machine_init(void)
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_ide_set_platdata(&smdk6410_ide_pdata);
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
......
......@@ -37,8 +37,9 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/ata-core.h>
#include <plat/adc-core.h>
#include <plat/iic-core.h>
#include <plat/adc.h>
#include <plat/onenand-core.h>
#include <mach/s3c6400.h>
#include <mach/s3c6410.h>
......@@ -54,10 +55,11 @@ void __init s3c6410_map_io(void)
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
s3c_device_adc.name = "s3c64xx-adc";
s3c_adc_setname("s3c64xx-adc");
s3c_device_nand.name = "s3c6400-nand";
s3c_onenand_setname("s3c6410-onenand");
s3c64xx_onenand1_setname("s3c6410-onenand");
s3c_cfcon_setname("s3c64xx-pata");
}
void __init s3c6410_init_clocks(int xtal)
......
......@@ -15,9 +15,9 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <mach/regs-fb.h>
#include <mach/gpio.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
......
......@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
......
......@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
......
/* linux/arch/arm/mach-s3c64xx/setup-ide.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S3C64XX setup information for IDE
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
void s3c64xx_ide_setup_gpio(void)
{
u32 reg;
u32 gpio = 0;
reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
/* Independent CF interface, CF chip select configuration */
writel(reg | MEM_SYS_CFG_INDEP_CF |
MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
/* Set XhiDATA[15:0] pins as CF Data[15:0] */
for (gpio = S3C64XX_GPK(0); gpio <= S3C64XX_GPK(15); gpio++)
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(5));
/* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
for (gpio = S3C64XX_GPL(0); gpio <= S3C64XX_GPL(2); gpio++)
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
/* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
for (gpio = S3C64XX_GPM(0); gpio <= S3C64XX_GPM(4); gpio++)
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
}
/* linux/arch/arm/mach-s3c64xx/setup-keypad.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* GPIO configuration for S3C64XX KeyPad device
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
unsigned int gpio;
unsigned int end;
/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
end = S3C64XX_GPK(8 + rows);
for (gpio = S3C64XX_GPK(8); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
end = S3C64XX_GPL(0 + cols);
for (gpio = S3C64XX_GPL(0); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
}
......@@ -16,12 +16,14 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/sdhci.h>
void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
......@@ -33,12 +35,15 @@ void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
}
}
void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
......@@ -50,8 +55,10 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
}
}
void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
......
......@@ -21,13 +21,11 @@ config S5P6440_SETUP_I2C1
config MACH_SMDK6440
bool "SMDK6440"
select CPU_S5P6440
select SAMSUNG_DEV_TS
select SAMSUNG_DEV_ADC
select S3C_DEV_RTC
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
select HAVE_S3C_RTC
select HAVE_S3C2410_WATCHDOG
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
select S5P6440_SETUP_I2C1
help
Machine support for the Samsung SMDK6440
......
......@@ -37,6 +37,7 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/s5p6440.h>
#include <plat/adc-core.h>
static void s5p6440_idle(void)
{
......@@ -61,7 +62,7 @@ static void s5p6440_idle(void)
void __init s5p6440_map_io(void)
{
/* initialize any device information early */
s3c_device_adc.name = "s3c64xx-adc";
s3c_adc_setname("s3c64xx-adc");
}
void __init s5p6440_init_clocks(int xtal)
......
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
......
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
......
......@@ -13,9 +13,11 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/map.h>
#include <mach/gpio.h>
#include <mach/regs-gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
......
......@@ -20,7 +20,6 @@ config MACH_SMDK6442
bool "SMDK6442"
select CPU_S5P6442
select S3C_DEV_WDT
select HAVE_S3C2410_WATCHDOG
help
Machine support for Samsung SMDK6442
......
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
......
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
......
......@@ -49,24 +49,22 @@ config S5PC100_SETUP_SDHCI_GPIO
config MACH_SMDKC100
bool "SMDKC100"
select CPU_S5PC100
select SAMSUNG_DEV_ADC
select S3C_DEV_FB
select S3C_DEV_I2C1
select SAMSUNG_DEV_IDE
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select SAMSUNG_DEV_KEYPAD
select S3C_DEV_I2C1
select S3C_DEV_RTC
select SAMSUNG_DEV_TS
select S3C_DEV_WDT
select HAVE_S3C2410_WATCHDOG
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_TS
select S5PC100_SETUP_FB_24BPP
select S5PC100_SETUP_I2C1
select S5PC100_SETUP_IDE
select S5PC100_SETUP_KEYPAD
select S5PC100_SETUP_SDHCI
select HAVE_S3C_RTC
help
Machine support for the Samsung SMDKC100
......
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
......
......@@ -10,10 +10,10 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
......
......@@ -99,6 +99,10 @@
#define S5PC100_PA_FB (0xEE000000)
#define S5PC100_PA_FIMC0 (0xEE200000)
#define S5PC100_PA_FIMC1 (0xEE300000)
#define S5PC100_PA_FIMC2 (0xEE400000)
#define S5PC100_PA_I2S0 (0xF2000000)
#define S5PC100_PA_I2S1 (0xF2100000)
#define S5PC100_PA_I2S2 (0xF2200000)
......@@ -148,4 +152,8 @@
#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
#endif /* __ASM_ARCH_C100_MAP_H */
......@@ -20,9 +20,11 @@
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
unsigned int num;
......@@ -47,12 +49,15 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
}
}
s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
}
}
void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
......@@ -64,12 +69,15 @@ void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
}
}
void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
......@@ -81,6 +89,8 @@ void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
}
}
......@@ -53,19 +53,24 @@ config S5PV210_SETUP_SDHCI_GPIO
help
Common setup code for SDHCI gpio.
config S5PC110_DEV_ONENAND
bool
help
Compile in platform device definition for OneNAND1 controller
menu "S5PC110 Machines"
config MACH_AQUILA
bool "Aquila"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_SDHCI
select S3C_DEV_FB
select S5PC110_DEV_ONENAND
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S5PC110_DEV_ONENAND
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_SDHCI
help
Machine support for the Samsung Aquila target based on S5PC110 SoC
......@@ -73,13 +78,13 @@ config MACH_GONI
bool "GONI"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_SDHCI
select S3C_DEV_FB
select S5PC110_DEV_ONENAND
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S5PC110_DEV_ONENAND
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_SDHCI
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
......@@ -90,11 +95,9 @@ config MACH_SMDKC110
select ARCH_SPARSEMEM_ENABLE
select S3C_DEV_I2C1
select S3C_DEV_I2C2
select SAMSUNG_DEV_IDE
select S3C_DEV_RTC
select S3C_DEV_WDT
select HAVE_S3C_RTC
select HAVE_S3C2410_WATCHDOG
select SAMSUNG_DEV_IDE
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_IDE
......@@ -104,31 +107,24 @@ config MACH_SMDKC110
endmenu
config S5PC110_DEV_ONENAND
bool
help
Compile in platform device definition for OneNAND1 controller
menu "S5PV210 Machines"
config MACH_SMDKV210
bool "SMDKV210"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
select SAMSUNG_DEV_ADC
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_WDT
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_TS
select S3C_DEV_RTC
select S3C_DEV_WDT
select HAVE_S3C_RTC
select HAVE_S3C2410_WATCHDOG
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_IDE
......
......@@ -32,7 +32,9 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/s5pv210.h>
#include <plat/adc-core.h>
#include <plat/ata-core.h>
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
#include <plat/keypad-core.h>
#include <plat/sdhci.h>
......@@ -84,9 +86,6 @@ static void s5pv210_sw_reset(void)
void __init s5pv210_map_io(void)
{
#ifdef CONFIG_S3C_DEV_ADC
s3c_device_adc.name = "s3c64xx-adc";
#endif
iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
/* initialise device information early */
......@@ -95,8 +94,14 @@ void __init s5pv210_map_io(void)
s5pv210_default_sdhci2();
s5pv210_default_sdhci3();
s3c_adc_setname("s3c64xx-adc");
s3c_cfcon_setname("s5pv210-pata");
s3c_fimc_setname(0, "s5pv210-fimc");
s3c_fimc_setname(1, "s5pv210-fimc");
s3c_fimc_setname(2, "s5pv210-fimc");
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
......
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
......
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
......
......@@ -65,6 +65,10 @@
#define S5PV210_PA_FB (0xF8000000)
#define S5PV210_PA_FIMC0 (0xFB200000)
#define S5PV210_PA_FIMC1 (0xFB300000)
#define S5PV210_PA_FIMC2 (0xFB400000)
#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
#define S5PV210_PA_VIC0 (0xF2000000)
......@@ -109,6 +113,9 @@
#define S3C_PA_FB S5PV210_PA_FB
#define S3C_PA_RTC S5PV210_PA_RTC
#define S3C_PA_WDT S5PV210_PA_WATCHDOG
#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
#define SAMSUNG_PA_ADC S5PV210_PA_ADC
#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
......
......@@ -13,9 +13,9 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <mach/regs-fb.h>
#include <mach/gpio.h>
#include <mach/map.h>
#include <plat/fb.h>
#include <mach/regs-clock.h>
......
......@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
......
......@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
......
......@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
......
......@@ -15,15 +15,17 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
......@@ -48,12 +50,15 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
break;
}
s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
}
}
void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG1[0:1] pins to special-function 2 */
......@@ -68,12 +73,15 @@ void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
}
}
void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG2[0:1] pins to special-function 2 */
......@@ -99,8 +107,10 @@ void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
break;
}
s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
}
}
void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
......
......@@ -19,3 +19,8 @@ obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
# devices
obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o
obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o
obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o
/* linux/arch/arm/plat-s5p/dev-fimc0.c
*
* Copyright (c) 2010 Samsung Electronics
*
* Base S5P FIMC0 resource and device definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <mach/map.h>
static struct resource s5p_fimc0_resource[] = {
[0] = {
.start = S5P_PA_FIMC0,
.end = S5P_PA_FIMC0 + SZ_1M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_FIMC0,
.end = IRQ_FIMC0,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device s5p_device_fimc0 = {
.name = "s5p-fimc",
.id = 0,
.num_resources = ARRAY_SIZE(s5p_fimc0_resource),
.resource = s5p_fimc0_resource,
};
/* linux/arch/arm/plat-s5p/dev-fimc1.c
*
* Copyright (c) 2010 Samsung Electronics
*
* Base S5P FIMC1 resource and device definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <mach/map.h>
static struct resource s5p_fimc1_resource[] = {
[0] = {
.start = S5P_PA_FIMC1,
.end = S5P_PA_FIMC1 + SZ_1M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_FIMC1,
.end = IRQ_FIMC1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device s5p_device_fimc1 = {
.name = "s5p-fimc",
.id = 1,
.num_resources = ARRAY_SIZE(s5p_fimc1_resource),
.resource = s5p_fimc1_resource,
};
/* linux/arch/arm/plat-s5p/dev-fimc2.c
*
* Copyright (c) 2010 Samsung Electronics
*
* Base S5P FIMC2 resource and device definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <mach/map.h>
static struct resource s5p_fimc2_resource[] = {
[0] = {
.start = S5P_PA_FIMC2,
.end = S5P_PA_FIMC2 + SZ_1M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_FIMC2,
.end = IRQ_FIMC2,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device s5p_device_fimc2 = {
.name = "s5p-fimc",
.id = 2,
.num_resources = ARRAY_SIZE(s5p_fimc2_resource),
.resource = s5p_fimc2_resource,
};
......@@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2
help
Compile in platform device definitions for HSMMC channel 2
config S3C_DEV_HSMMC3
bool
help
Compile in platform device definitions for HSMMC channel 3
config S3C_DEV_HWMON
bool
help
......@@ -216,6 +221,11 @@ config SAMSUNG_DEV_ADC
help
Compile in platform device definition for ADC controller
config SAMSUNG_DEV_IDE
bool
help
Compile in platform device definitions for IDE
config S3C64XX_DEV_SPI
bool
help
......@@ -227,6 +237,11 @@ config SAMSUNG_DEV_TS
help
Common in platform device definitions for touchscreen device
config SAMSUNG_DEV_KEYPAD
bool
help
Compile in platform device definitions for keypad
# DMA
config S3C_DMA
......
......@@ -30,9 +30,12 @@ obj-$(CONFIG_S3C_ADC) += adc.o
# devices
obj-y += platformdata.o
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o
obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
......@@ -47,7 +50,9 @@ obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o
obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o
obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o
obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o
obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o
# DMA support
......
......@@ -60,6 +60,11 @@ void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
set->max_width = pd->max_width;
set->cd_type = pd->cd_type;
set->ext_cd_init = pd->ext_cd_init;
set->ext_cd_cleanup = pd->ext_cd_cleanup;
set->ext_cd_gpio = pd->ext_cd_gpio;
set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
......
......@@ -60,6 +60,11 @@ void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
set->max_width = pd->max_width;
set->cd_type = pd->cd_type;
set->ext_cd_init = pd->ext_cd_init;
set->ext_cd_cleanup = pd->ext_cd_cleanup;
set->ext_cd_gpio = pd->ext_cd_gpio;
set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
......
......@@ -61,6 +61,11 @@ void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
set->max_width = pd->max_width;
set->cd_type = pd->cd_type;
set->ext_cd_init = pd->ext_cd_init;
set->ext_cd_cleanup = pd->ext_cd_cleanup;
set->ext_cd_gpio = pd->ext_cd_gpio;
set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
......
/* linux/arch/arm/plat-samsung/dev-hsmmc3.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* Based on arch/arm/plat-samsung/dev-hsmmc1.c
*
* Samsung device definition for hsmmc device 3
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mmc/host.h>
#include <mach/map.h>
#include <plat/sdhci.h>
#include <plat/devs.h>
#define S3C_SZ_HSMMC (0x1000)
static struct resource s3c_hsmmc3_resource[] = {
[0] = {
.start = S3C_PA_HSMMC3,
.end = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_MMC3,
.end = IRQ_MMC3,
.flags = IORESOURCE_IRQ,
}
};
static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL;
struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
.max_width = 4,
.host_caps = (MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
};
struct platform_device s3c_device_hsmmc3 = {
.name = "s3c-sdhci",
.id = 3,
.num_resources = ARRAY_SIZE(s3c_hsmmc3_resource),
.resource = s3c_hsmmc3_resource,
.dev = {
.dma_mask = &s3c_device_hsmmc3_dmamask,
.coherent_dma_mask = 0xffffffffUL,
.platform_data = &s3c_hsmmc3_def_platdata,
},
};
void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
{
struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
set->max_width = pd->max_width;
set->cd_type = pd->cd_type;
set->ext_cd_init = pd->ext_cd_init;
set->ext_cd_cleanup = pd->ext_cd_cleanup;
set->ext_cd_gpio = pd->ext_cd_gpio;
set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
set->cfg_card = pd->cfg_card;
}
/* linux/arch/arm/plat-samsung/dev-ide.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung CF-ATA device definition.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <mach/map.h>
#include <plat/ata.h>
#include <plat/devs.h>
static struct resource s3c_cfcon_resource[] = {
[0] = {
.start = SAMSUNG_PA_CFCON,
.end = SAMSUNG_PA_CFCON + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_CFCON,
.end = IRQ_CFCON,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device s3c_device_cfcon = {
.id = 0,
.num_resources = ARRAY_SIZE(s3c_cfcon_resource),
.resource = s3c_cfcon_resource,
};
void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
{
s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
&s3c_device_cfcon);
}
/*
* linux/arch/arm/plat-samsung/dev-keypad.c
*
* Copyright (C) 2010 Samsung Electronics Co.Ltd
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/platform_device.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/keypad.h>
static struct resource samsung_keypad_resources[] = {
[0] = {
.start = SAMSUNG_PA_KEYPAD,
.end = SAMSUNG_PA_KEYPAD + 0x20 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_KEYPAD,
.end = IRQ_KEYPAD,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device samsung_device_keypad = {
.name = "samsung-keypad",
.id = -1,
.num_resources = ARRAY_SIZE(samsung_keypad_resources),
.resource = samsung_keypad_resources,
};
void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
{
struct samsung_keypad_platdata *npd;
npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
&samsung_device_keypad);
if (!npd->cfg_gpio)
npd->cfg_gpio = samsung_keypad_cfg_gpio;
}
......@@ -21,7 +21,7 @@
static struct resource s3c_wdt_resource[] = {
[0] = {
.start = S3C_PA_WDT,
.end = S3C_PA_WDT + SZ_1M - 1,
.end = S3C_PA_WDT + SZ_1K,
.flags = IORESOURCE_MEM,
},
[1] = {
......
......@@ -18,7 +18,7 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/gpio.h>
#include <linux/gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
......
/* linux/arch/arm/plat-samsung/include/plat/adc-core.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Samsung ADC Controller core functions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_ADC_CORE_H
#define __ASM_PLAT_ADC_CORE_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
*/
/* re-define device name depending on support. */
static inline void s3c_adc_setname(char *name)
{
#ifdef CONFIG_SAMSUNG_DEV_ADC
s3c_device_adc.name = name;
#endif
}
#endif /* __ASM_PLAT_ADC_CORE_H */
/* linux/arch/arm/plat-samsung/include/plat/ata-core.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung CF-ATA Controller core functions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_ATA_CORE_H
#define __ASM_PLAT_ATA_CORE_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
*/
/* re-define device name depending on support. */
static inline void s3c_cfcon_setname(char *name)
{
#ifdef CONFIG_SAMSUNG_DEV_IDE
s3c_device_cfcon.name = name;
#endif
}
#endif /* __ASM_PLAT_ATA_CORE_H */
/* linux/arch/arm/plat-samsung/include/plat/ata.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung CF-ATA platform_device info
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_ATA_H
#define __ASM_PLAT_ATA_H __FILE__
/**
* struct s3c_ide_platdata - S3C IDE driver platform data.
* @setup_gpio: Setup the external GPIO pins to the right state for data
* transfer in true-ide mode.
*/
struct s3c_ide_platdata {
void (*setup_gpio)(void);
};
/*
* s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
* @pdata: Platform data for IDE driver.
*/
extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
/* architecture-specific IDE configuration */
extern void s3c64xx_ide_setup_gpio(void);
extern void s5pc100_ide_setup_gpio(void);
extern void s5pv210_ide_setup_gpio(void);
#endif /*__ASM_PLAT_ATA_H */
......@@ -54,6 +54,8 @@ extern struct platform_device s3c_device_hwmon;
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
extern struct platform_device s3c_device_hsmmc2;
extern struct platform_device s3c_device_hsmmc3;
extern struct platform_device s3c_device_cfcon;
extern struct platform_device s3c_device_spi0;
extern struct platform_device s3c_device_spi1;
......@@ -100,6 +102,12 @@ extern struct platform_device s5pc100_device_iis0;
extern struct platform_device s5pc100_device_iis1;
extern struct platform_device s5pc100_device_iis2;
extern struct platform_device samsung_device_keypad;
extern struct platform_device s5p_device_fimc0;
extern struct platform_device s5p_device_fimc1;
extern struct platform_device s5p_device_fimc2;
/* s3c2440 specific devices */
#ifdef CONFIG_CPU_S3C2440
......@@ -108,3 +116,15 @@ extern struct platform_device s3c_device_camif;
extern struct platform_device s3c_device_ac97;
#endif
/**
* s3c_set_platdata() - helper for setting platform data
* @pd: The default platform data for this device.
* @pdsize: The size of the platform data.
* @pdev: Pointer to the device to fill in.
*
* This helper replaces a number of calls that copy and then set the
* platform data of the device.
*/
extern void *s3c_set_platdata(void *pd, size_t pdsize,
struct platform_device *pdev);
/*
* arch/arm/plat-samsung/include/plat/fimc-core.h
*
* Copyright 2010 Samsung Electronics Co., Ltd.
* Sylwester Nawrocki <s.nawrocki@samsung.com>
*
* Samsung camera interface driver core functions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_FIMC_CORE_H
#define __ASM_PLAT_FIMC_CORE_H __FILE__
/*
* These functions are only for use with the core support code, such as
* the CPU-specific initialization code.
*/
/* Re-define device name to differentiate the subsystem in various SoCs. */
static inline void s3c_fimc_setname(int id, char *name)
{
switch (id) {
#ifdef CONFIG_S5P_DEV_FIMC0
case 0:
s5p_device_fimc0.name = name;
break;
#endif
#ifdef CONFIG_S5P_DEV_FIMC1
case 1:
s5p_device_fimc1.name = name;
break;
#endif
#ifdef CONFIG_S5P_DEV_FIMC2
case 2:
s5p_device_fimc2.name = name;
break;
#endif
}
}
#endif /* __ASM_PLAT_FIMC_CORE_H */
/*
* Samsung Platform - Keypad platform data definitions
*
* Copyright (C) 2010 Samsung Electronics Co.Ltd
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __PLAT_SAMSUNG_KEYPAD_H
#define __PLAT_SAMSUNG_KEYPAD_H
#include <linux/input/matrix_keypad.h>
#define SAMSUNG_MAX_ROWS 8
#define SAMSUNG_MAX_COLS 8
/**
* struct samsung_keypad_platdata - Platform device data for Samsung Keypad.
* @keymap_data: pointer to &matrix_keymap_data.
* @rows: number of keypad row supported.
* @cols: number of keypad col supported.
* @no_autorepeat: disable key autorepeat.
* @wakeup: controls whether the device should be set up as wakeup source.
* @cfg_gpio: configure the GPIO.
*
* Initialisation data specific to either the machine or the platform
* for the device driver to use or call-back when configuring gpio.
*/
struct samsung_keypad_platdata {
const struct matrix_keymap_data *keymap_data;
unsigned int rows;
unsigned int cols;
bool no_autorepeat;
bool wakeup;
void (*cfg_gpio)(unsigned int rows, unsigned int cols);
};
/**
* samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
* @pd: Platform data to register to device.
*
* Register the given platform data for use with Samsung Keypad device.
* The call will copy the platform data, so the board definitions can
* make the structure itself __initdata.
*/
extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
/* defined by architecture to configure gpio. */
extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
#endif /* __PLAT_SAMSUNG_KEYPAD_H */
/* linux/arch/arm/plat-samsung/include/plat/regs-ata.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung CF-ATA register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_REGS_ATA_H
#define __ASM_PLAT_REGS_ATA_H __FILE__
#define S3C_CFATA_REG(x) (x)
#define S3C_CFATA_MUX S3C_CFATA_REG(0x0)
#define S3C_ATA_CTRL S3C_CFATA_REG(0x0)
#define S3C_ATA_STATUS S3C_CFATA_REG(0x4)
#define S3C_ATA_CMD S3C_CFATA_REG(0x8)
#define S3C_ATA_SWRST S3C_CFATA_REG(0xc)
#define S3C_ATA_IRQ S3C_CFATA_REG(0x10)
#define S3C_ATA_IRQ_MSK S3C_CFATA_REG(0x14)
#define S3C_ATA_CFG S3C_CFATA_REG(0x18)
#define S3C_ATA_MDMA_TIME S3C_CFATA_REG(0x28)
#define S3C_ATA_PIO_TIME S3C_CFATA_REG(0x2c)
#define S3C_ATA_UDMA_TIME S3C_CFATA_REG(0x30)
#define S3C_ATA_XFR_NUM S3C_CFATA_REG(0x34)
#define S3C_ATA_XFR_CNT S3C_CFATA_REG(0x38)
#define S3C_ATA_TBUF_START S3C_CFATA_REG(0x3c)
#define S3C_ATA_TBUF_SIZE S3C_CFATA_REG(0x40)
#define S3C_ATA_SBUF_START S3C_CFATA_REG(0x44)
#define S3C_ATA_SBUF_SIZE S3C_CFATA_REG(0x48)
#define S3C_ATA_CADR_TBUF S3C_CFATA_REG(0x4c)
#define S3C_ATA_CADR_SBUF S3C_CFATA_REG(0x50)
#define S3C_ATA_PIO_DTR S3C_CFATA_REG(0x54)
#define S3C_ATA_PIO_FED S3C_CFATA_REG(0x58)
#define S3C_ATA_PIO_SCR S3C_CFATA_REG(0x5c)
#define S3C_ATA_PIO_LLR S3C_CFATA_REG(0x60)
#define S3C_ATA_PIO_LMR S3C_CFATA_REG(0x64)
#define S3C_ATA_PIO_LHR S3C_CFATA_REG(0x68)
#define S3C_ATA_PIO_DVR S3C_CFATA_REG(0x6c)
#define S3C_ATA_PIO_CSD S3C_CFATA_REG(0x70)
#define S3C_ATA_PIO_DAD S3C_CFATA_REG(0x74)
#define S3C_ATA_PIO_READY S3C_CFATA_REG(0x78)
#define S3C_ATA_PIO_RDATA S3C_CFATA_REG(0x7c)
#define S3C_CFATA_MUX_TRUEIDE 0x01
#define S3C_ATA_CFG_SWAP 0x40
#define S3C_ATA_CFG_IORDYEN 0x02
#endif /* __ASM_PLAT_REGS_ATA_H */
......@@ -14,6 +14,9 @@
#define __ASM_ARCH_REGS_RTC_H __FILE__
#define S3C2410_RTCREG(x) (x)
#define S3C2410_INTP S3C2410_RTCREG(0x30)
#define S3C2410_INTP_ALM (1 << 1)
#define S3C2410_INTP_TIC (1 << 0)
#define S3C2410_RTCCON S3C2410_RTCREG(0x40)
#define S3C2410_RTCCON_RTCEN (1<<0)
......
......@@ -20,10 +20,31 @@ struct mmc_host;
struct mmc_card;
struct mmc_ios;
enum cd_types {
S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
S3C_SDHCI_CD_EXTERNAL, /* use external callback */
S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
};
/**
* struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
* @max_width: The maximum number of data bits supported.
* @host_caps: Standard MMC host capabilities bit field.
* @cd_type: Type of Card Detection method (see cd_types enum above)
* @ext_cd_init: Initialize external card detect subsystem. Called on
* sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
* notify_func argument is a callback to the sdhci-s3c driver
* that triggers the card detection event. Callback arguments:
* dev is pointer to platform device of the host controller,
* state is new state of the card (0 - removed, 1 - inserted).
* @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
* sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
* notify_func argument is the same callback as for ext_cd_init.
* @ext_cd_gpio: gpio pin used for external CD line, valid only if
* cd_type == S3C_SDHCI_CD_GPIO
* @ext_cd_gpio_invert: invert values for external CD gpio line
* @cfg_gpio: Configure the GPIO for a specific card bit-width
* @cfg_card: Configure the interface for a specific card and speed. This
* is necessary the controllers and/or GPIO blocks require the
......@@ -37,9 +58,17 @@ struct mmc_ios;
struct s3c_sdhci_platdata {
unsigned int max_width;
unsigned int host_caps;
enum cd_types cd_type;
char **clocks; /* set of clock sources */
int ext_cd_gpio;
bool ext_cd_gpio_invert;
int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
int state));
int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
int state));
void (*cfg_gpio)(struct platform_device *dev, int width);
void (*cfg_card)(struct platform_device *dev,
void __iomem *regbase,
......@@ -58,6 +87,7 @@ struct s3c_sdhci_platdata {
extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd);
/* Default platform data, exported so that per-cpu initialisation can
* set the correct one when there are more than one cpu type selected.
......@@ -66,6 +96,7 @@ extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
/* Helper function availablity */
......@@ -80,12 +111,11 @@ extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
/* S3C6400 SDHCI setup */
/* S3C64XX SDHCI setup */
#ifdef CONFIG_S3C64XX_SETUP_SDHCI
extern char *s3c64xx_hsmmc_clksrcs[4];
#ifdef CONFIG_S3C_DEV_HSMMC
extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
......@@ -93,76 +123,62 @@ extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
static inline void s3c6400_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
#endif
}
#else
static inline void s3c6400_default_sdhci0(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC */
#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s3c6400_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
#endif
}
#else
static inline void s3c6400_default_sdhci1(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC1 */
#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s3c6400_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
#endif
}
#else
static inline void s3c6400_default_sdhci2(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC2 */
/* S3C6410 SDHCI setup */
extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
struct mmc_card *card);
#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s3c6410_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
#endif
}
#else
static inline void s3c6410_default_sdhci0(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC */
#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s3c6410_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
#endif
}
#else
static inline void s3c6410_default_sdhci1(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC1 */
#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s3c6410_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
#endif
}
#else
static inline void s3c6410_default_sdhci2(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC2 */
#else
static inline void s3c6410_default_sdhci0(void) { }
......@@ -184,48 +200,42 @@ extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
struct mmc_ios *ios,
struct mmc_card *card);
#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s5pc100_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
#endif
}
#else
static inline void s5pc100_default_sdhci0(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC */
#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s5pc100_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
#endif
}
#else
static inline void s5pc100_default_sdhci1(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC1 */
#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s5pc100_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
#endif
}
#else
static inline void s5pc100_default_sdhci2(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC1 */
#else
static inline void s5pc100_default_sdhci0(void) { }
static inline void s5pc100_default_sdhci1(void) { }
static inline void s5pc100_default_sdhci2(void) { }
#endif /* CONFIG_S5PC100_SETUP_SDHCI */
/* S5PV210 SDHCI setup */
/* S5PC110 SDHCI setup */
#ifdef CONFIG_S5PV210_SETUP_SDHCI
extern char *s5pv210_hsmmc_clksrcs[4];
......@@ -234,58 +244,48 @@ extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
struct mmc_ios *ios,
struct mmc_card *card);
#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s5pv210_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
#endif
}
#else
static inline void s5pv210_default_sdhci0(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC */
#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s5pv210_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
#endif
}
#else
static inline void s5pv210_default_sdhci1(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC1 */
#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s5pv210_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
#endif
}
#else
static inline void s5pv210_default_sdhci2(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC2 */
#ifdef CONFIG_S3C_DEV_HSMMC3
static inline void s5pv210_default_sdhci3(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC3
s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
#endif
}
#else
static inline void s5pv210_default_sdhci3(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC3 */
#else
static inline void s5pv210_default_sdhci0(void) { }
static inline void s5pv210_default_sdhci1(void) { }
static inline void s5pv210_default_sdhci2(void) { }
static inline void s5pv210_default_sdhci3(void) { }
#endif /* CONFIG_S5PC100_SETUP_SDHCI */
#endif /* CONFIG_S5PV210_SETUP_SDHCI */
#endif /* __PLAT_S3C_SDHCI_H */
/* linux/arch/arm/plat-samsung/platformdata.c
*
* Copyright 2010 Ben Dooks <ben-linux <at> fluff.org>
*
* Helper for platform data setting
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <plat/devs.h>
void __init *s3c_set_platdata(void *pd, size_t pdsize,
struct platform_device *pdev)
{
void *npd;
if (!pd) {
/* too early to use dev_name(), may not be registered */
printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
return NULL;
}
npd = kmemdup(pd, pdsize, GFP_KERNEL);
if (!npd) {
printk(KERN_ERR "%s: cannot clone platform data\n", pdev->name);
return NULL;
}
pdev->dev.platform_data = npd;
return npd;
}
......@@ -1315,10 +1315,14 @@ static bool kbd_match(struct input_handler *handler, struct input_dev *dev)
if (test_bit(EV_SND, dev->evbit))
return true;
if (test_bit(EV_KEY, dev->evbit))
if (test_bit(EV_KEY, dev->evbit)) {
for (i = KEY_RESERVED; i < BTN_MISC; i++)
if (test_bit(i, dev->keybit))
return true;
for (i = KEY_BRL_DOT1; i <= KEY_BRL_DOT10; i++)
if (test_bit(i, dev->keybit))
return true;
}
return false;
}
......
......@@ -1586,6 +1586,7 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
......
......@@ -198,6 +198,7 @@
#define USB_VENDOR_ID_ETT 0x0664
#define USB_DEVICE_ID_TC5UH 0x0309
#define USB_DEVICE_ID_TC4UM 0x0306
#define USB_VENDOR_ID_EZKEY 0x0518
#define USB_DEVICE_ID_BTC_8193 0x0002
......
......@@ -534,6 +534,9 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
input_set_abs_params(input, usage->code, a, b, (b - a) >> 8, (b - a) >> 4);
else input_set_abs_params(input, usage->code, a, b, 0, 0);
/* use a larger default input buffer for MT devices */
if (usage->code == ABS_MT_POSITION_X && input->hint_events_per_packet == 0)
input_set_events_per_packet(input, 60);
}
if (usage->type == EV_ABS &&
......
......@@ -521,12 +521,19 @@ config I2C_PXA_SLAVE
is necessary for systems where the PXA may be a target on the
I2C bus.
config HAVE_S3C2410_I2C
bool
help
This will include I2C support for Samsung SoCs. If you want to
include I2C support for any machine, kindly select this in the
respective Kconfig file.
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
depends on ARCH_S3C2410 || ARCH_S3C64XX
depends on HAVE_S3C2410_I2C
help
Say Y here to include support for I2C controller in the
Samsung S3C2410 based System-on-Chip devices.
Samsung SoCs.
config I2C_S6000
tristate "S6000 I2C support"
......
......@@ -10,7 +10,8 @@
#define EVDEV_MINOR_BASE 64
#define EVDEV_MINORS 32
#define EVDEV_BUFFER_SIZE 64
#define EVDEV_MIN_BUFFER_SIZE 64U
#define EVDEV_BUF_PACKETS 8
#include <linux/poll.h>
#include <linux/sched.h>
......@@ -23,7 +24,6 @@
#include "input-compat.h"
struct evdev {
int exist;
int open;
int minor;
struct input_handle handle;
......@@ -33,16 +33,18 @@ struct evdev {
spinlock_t client_lock; /* protects client_list */
struct mutex mutex;
struct device dev;
bool exist;
};
struct evdev_client {
struct input_event buffer[EVDEV_BUFFER_SIZE];
int head;
int tail;
spinlock_t buffer_lock; /* protects access to buffer, head and tail */
struct fasync_struct *fasync;
struct evdev *evdev;
struct list_head node;
int bufsize;
struct input_event buffer[];
};
static struct evdev *evdev_table[EVDEV_MINORS];
......@@ -52,11 +54,15 @@ static void evdev_pass_event(struct evdev_client *client,
struct input_event *event)
{
/*
* Interrupts are disabled, just acquire the lock
* Interrupts are disabled, just acquire the lock.
* Make sure we don't leave with the client buffer
* "empty" by having client->head == client->tail.
*/
spin_lock(&client->buffer_lock);
client->buffer[client->head++] = *event;
client->head &= EVDEV_BUFFER_SIZE - 1;
do {
client->buffer[client->head++] = *event;
client->head &= client->bufsize - 1;
} while (client->head == client->tail);
spin_unlock(&client->buffer_lock);
if (event->type == EV_SYN)
......@@ -242,11 +248,21 @@ static int evdev_release(struct inode *inode, struct file *file)
return 0;
}
static unsigned int evdev_compute_buffer_size(struct input_dev *dev)
{
unsigned int n_events =
max(dev->hint_events_per_packet * EVDEV_BUF_PACKETS,
EVDEV_MIN_BUFFER_SIZE);
return roundup_pow_of_two(n_events);
}
static int evdev_open(struct inode *inode, struct file *file)
{
struct evdev *evdev;
struct evdev_client *client;
int i = iminor(inode) - EVDEV_MINOR_BASE;
unsigned int bufsize;
int error;
if (i >= EVDEV_MINORS)
......@@ -263,12 +279,17 @@ static int evdev_open(struct inode *inode, struct file *file)
if (!evdev)
return -ENODEV;
client = kzalloc(sizeof(struct evdev_client), GFP_KERNEL);
bufsize = evdev_compute_buffer_size(evdev->handle.dev);
client = kzalloc(sizeof(struct evdev_client) +
bufsize * sizeof(struct input_event),
GFP_KERNEL);
if (!client) {
error = -ENOMEM;
goto err_put_evdev;
}
client->bufsize = bufsize;
spin_lock_init(&client->buffer_lock);
client->evdev = evdev;
evdev_attach_client(evdev, client);
......@@ -334,7 +355,7 @@ static int evdev_fetch_next_event(struct evdev_client *client,
have_event = client->head != client->tail;
if (have_event) {
*event = client->buffer[client->tail++];
client->tail &= EVDEV_BUFFER_SIZE - 1;
client->tail &= client->bufsize - 1;
}
spin_unlock_irq(&client->buffer_lock);
......@@ -382,10 +403,15 @@ static unsigned int evdev_poll(struct file *file, poll_table *wait)
{
struct evdev_client *client = file->private_data;
struct evdev *evdev = client->evdev;
unsigned int mask;
poll_wait(file, &evdev->wait, wait);
return ((client->head == client->tail) ? 0 : (POLLIN | POLLRDNORM)) |
(evdev->exist ? 0 : (POLLHUP | POLLERR));
mask = evdev->exist ? POLLOUT | POLLWRNORM : POLLHUP | POLLERR;
if (client->head != client->tail)
mask |= POLLIN | POLLRDNORM;
return mask;
}
#ifdef CONFIG_COMPAT
......@@ -665,6 +691,10 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
sizeof(struct input_absinfo))))
return -EFAULT;
/* We can't change number of reserved MT slots */
if (t == ABS_MT_SLOT)
return -EINVAL;
/*
* Take event lock to ensure that we are not
* changing device parameters in the middle
......@@ -768,7 +798,7 @@ static void evdev_remove_chrdev(struct evdev *evdev)
static void evdev_mark_dead(struct evdev *evdev)
{
mutex_lock(&evdev->mutex);
evdev->exist = 0;
evdev->exist = false;
mutex_unlock(&evdev->mutex);
}
......@@ -817,7 +847,7 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
init_waitqueue_head(&evdev->wait);
dev_set_name(&evdev->dev, "event%d", minor);
evdev->exist = 1;
evdev->exist = true;
evdev->minor = minor;
evdev->handle.dev = input_get_device(dev);
......
......@@ -33,25 +33,6 @@ MODULE_LICENSE("GPL");
#define INPUT_DEVICES 256
/*
* EV_ABS events which should not be cached are listed here.
*/
static unsigned int input_abs_bypass_init_data[] __initdata = {
ABS_MT_TOUCH_MAJOR,
ABS_MT_TOUCH_MINOR,
ABS_MT_WIDTH_MAJOR,
ABS_MT_WIDTH_MINOR,
ABS_MT_ORIENTATION,
ABS_MT_POSITION_X,
ABS_MT_POSITION_Y,
ABS_MT_TOOL_TYPE,
ABS_MT_BLOB_ID,
ABS_MT_TRACKING_ID,
ABS_MT_PRESSURE,
0
};
static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
static LIST_HEAD(input_dev_list);
static LIST_HEAD(input_handler_list);
......@@ -181,6 +162,56 @@ static void input_stop_autorepeat(struct input_dev *dev)
#define INPUT_PASS_TO_DEVICE 2
#define INPUT_PASS_TO_ALL (INPUT_PASS_TO_HANDLERS | INPUT_PASS_TO_DEVICE)
static int input_handle_abs_event(struct input_dev *dev,
unsigned int code, int *pval)
{
bool is_mt_event;
int *pold;
if (code == ABS_MT_SLOT) {
/*
* "Stage" the event; we'll flush it later, when we
* get actiual touch data.
*/
if (*pval >= 0 && *pval < dev->mtsize)
dev->slot = *pval;
return INPUT_IGNORE_EVENT;
}
is_mt_event = code >= ABS_MT_FIRST && code <= ABS_MT_LAST;
if (!is_mt_event) {
pold = &dev->abs[code];
} else if (dev->mt) {
struct input_mt_slot *mtslot = &dev->mt[dev->slot];
pold = &mtslot->abs[code - ABS_MT_FIRST];
} else {
/*
* Bypass filtering for multitouch events when
* not employing slots.
*/
pold = NULL;
}
if (pold) {
*pval = input_defuzz_abs_event(*pval, *pold,
dev->absfuzz[code]);
if (*pold == *pval)
return INPUT_IGNORE_EVENT;
*pold = *pval;
}
/* Flush pending "slot" event */
if (is_mt_event && dev->slot != dev->abs[ABS_MT_SLOT]) {
dev->abs[ABS_MT_SLOT] = dev->slot;
input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot);
}
return INPUT_PASS_TO_HANDLERS;
}
static void input_handle_event(struct input_dev *dev,
unsigned int type, unsigned int code, int value)
{
......@@ -196,12 +227,12 @@ static void input_handle_event(struct input_dev *dev,
case SYN_REPORT:
if (!dev->sync) {
dev->sync = 1;
dev->sync = true;
disposition = INPUT_PASS_TO_HANDLERS;
}
break;
case SYN_MT_REPORT:
dev->sync = 0;
dev->sync = false;
disposition = INPUT_PASS_TO_HANDLERS;
break;
}
......@@ -233,21 +264,9 @@ static void input_handle_event(struct input_dev *dev,
break;
case EV_ABS:
if (is_event_supported(code, dev->absbit, ABS_MAX)) {
if (test_bit(code, input_abs_bypass)) {
disposition = INPUT_PASS_TO_HANDLERS;
break;
}
if (is_event_supported(code, dev->absbit, ABS_MAX))
disposition = input_handle_abs_event(dev, code, &value);
value = input_defuzz_abs_event(value,
dev->abs[code], dev->absfuzz[code]);
if (dev->abs[code] != value) {
dev->abs[code] = value;
disposition = INPUT_PASS_TO_HANDLERS;
}
}
break;
case EV_REL:
......@@ -298,7 +317,7 @@ static void input_handle_event(struct input_dev *dev,
}
if (disposition != INPUT_IGNORE_EVENT && type != EV_SYN)
dev->sync = 0;
dev->sync = false;
if ((disposition & INPUT_PASS_TO_DEVICE) && dev->event)
dev->event(dev, type, code, value);
......@@ -527,13 +546,31 @@ void input_close_device(struct input_handle *handle)
}
EXPORT_SYMBOL(input_close_device);
/*
* Simulate keyup events for all keys that are marked as pressed.
* The function must be called with dev->event_lock held.
*/
static void input_dev_release_keys(struct input_dev *dev)
{
int code;
if (is_event_supported(EV_KEY, dev->evbit, EV_MAX)) {
for (code = 0; code <= KEY_MAX; code++) {
if (is_event_supported(code, dev->keybit, KEY_MAX) &&
__test_and_clear_bit(code, dev->key)) {
input_pass_event(dev, EV_KEY, code, 0);
}
}
input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
}
}
/*
* Prepare device for unregistering
*/
static void input_disconnect_device(struct input_dev *dev)
{
struct input_handle *handle;
int code;
/*
* Mark device as going away. Note that we take dev->mutex here
......@@ -552,15 +589,7 @@ static void input_disconnect_device(struct input_dev *dev)
* generate events even after we done here but they will not
* reach any handlers.
*/
if (is_event_supported(EV_KEY, dev->evbit, EV_MAX)) {
for (code = 0; code <= KEY_MAX; code++) {
if (is_event_supported(code, dev->keybit, KEY_MAX) &&
__test_and_clear_bit(code, dev->key)) {
input_pass_event(dev, EV_KEY, code, 0);
}
}
input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
}
input_dev_release_keys(dev);
list_for_each_entry(handle, &dev->h_list, d_node)
handle->open = 0;
......@@ -684,7 +713,7 @@ int input_set_keycode(struct input_dev *dev,
unsigned int scancode, unsigned int keycode)
{
unsigned long flags;
int old_keycode;
unsigned int old_keycode;
int retval;
if (keycode > KEY_MAX)
......@@ -1278,6 +1307,7 @@ static void input_dev_release(struct device *device)
struct input_dev *dev = to_input_dev(device);
input_ff_destroy(dev);
input_mt_destroy_slots(dev);
kfree(dev);
module_put(THIS_MODULE);
......@@ -1433,6 +1463,15 @@ static int input_dev_resume(struct device *dev)
mutex_lock(&input_dev->mutex);
input_dev_reset(input_dev, true);
/*
* Keys that have been pressed at suspend time are unlikely
* to be still pressed when we resume.
*/
spin_lock_irq(&input_dev->event_lock);
input_dev_release_keys(input_dev);
spin_unlock_irq(&input_dev->event_lock);
mutex_unlock(&input_dev->mutex);
return 0;
......@@ -1517,6 +1556,45 @@ void input_free_device(struct input_dev *dev)
}
EXPORT_SYMBOL(input_free_device);
/**
* input_mt_create_slots() - create MT input slots
* @dev: input device supporting MT events and finger tracking
* @num_slots: number of slots used by the device
*
* This function allocates all necessary memory for MT slot handling
* in the input device, and adds ABS_MT_SLOT to the device capabilities.
*/
int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots)
{
if (!num_slots)
return 0;
dev->mt = kcalloc(num_slots, sizeof(struct input_mt_slot), GFP_KERNEL);
if (!dev->mt)
return -ENOMEM;
dev->mtsize = num_slots;
input_set_abs_params(dev, ABS_MT_SLOT, 0, num_slots - 1, 0, 0);
return 0;
}
EXPORT_SYMBOL(input_mt_create_slots);
/**
* input_mt_destroy_slots() - frees the MT slots of the input device
* @dev: input device with allocated MT slots
*
* This function is only needed in error path as the input core will
* automatically free the MT slots when the device is destroyed.
*/
void input_mt_destroy_slots(struct input_dev *dev)
{
kfree(dev->mt);
dev->mt = NULL;
dev->mtsize = 0;
}
EXPORT_SYMBOL(input_mt_destroy_slots);
/**
* input_set_capability - mark device as capable of a certain event
* @dev: device that is capable of emitting or accepting event
......@@ -1926,20 +2004,10 @@ static const struct file_operations input_fops = {
.open = input_open_file,
};
static void __init input_init_abs_bypass(void)
{
const unsigned int *p;
for (p = input_abs_bypass_init_data; *p; p++)
input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p);
}
static int __init input_init(void)
{
int err;
input_init_abs_bypass();
err = class_register(&input_class);
if (err) {
printk(KERN_ERR "input: unable to register input_dev class\n");
......
......@@ -37,7 +37,6 @@ MODULE_LICENSE("GPL");
#define JOYDEV_BUFFER_SIZE 64
struct joydev {
int exist;
int open;
int minor;
struct input_handle handle;
......@@ -46,6 +45,7 @@ struct joydev {
spinlock_t client_lock; /* protects client_list */
struct mutex mutex;
struct device dev;
bool exist;
struct js_corr corr[ABS_CNT];
struct JS_DATA_SAVE_TYPE glue;
......@@ -760,7 +760,7 @@ static void joydev_remove_chrdev(struct joydev *joydev)
static void joydev_mark_dead(struct joydev *joydev)
{
mutex_lock(&joydev->mutex);
joydev->exist = 0;
joydev->exist = false;
mutex_unlock(&joydev->mutex);
}
......@@ -817,10 +817,9 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
init_waitqueue_head(&joydev->wait);
dev_set_name(&joydev->dev, "js%d", minor);
joydev->exist = 1;
joydev->exist = true;
joydev->minor = minor;
joydev->exist = 1;
joydev->handle.dev = input_get_device(dev);
joydev->handle.name = dev_name(&joydev->dev);
joydev->handle.handler = handler;
......
......@@ -9,6 +9,7 @@
* 2005 Dominic Cerquetti <binary1230@yahoo.com>
* 2006 Adam Buchbinder <adam.buchbinder@gmail.com>
* 2007 Jan Kratochvil <honza@jikos.cz>
* 2010 Christoph Fritz <chf.fritz@googlemail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
......@@ -88,6 +89,9 @@
but we map them to axes when possible to simplify things */
#define MAP_DPAD_TO_BUTTONS (1 << 0)
#define MAP_TRIGGERS_TO_BUTTONS (1 << 1)
#define MAP_STICKS_TO_NULL (1 << 2)
#define DANCEPAD_MAP_CONFIG (MAP_DPAD_TO_BUTTONS | \
MAP_TRIGGERS_TO_BUTTONS | MAP_STICKS_TO_NULL)
#define XTYPE_XBOX 0
#define XTYPE_XBOX360 1
......@@ -102,6 +106,10 @@ static int triggers_to_buttons;
module_param(triggers_to_buttons, bool, S_IRUGO);
MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads");
static int sticks_to_null;
module_param(sticks_to_null, bool, S_IRUGO);
MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads");
static const struct xpad_device {
u16 idVendor;
u16 idProduct;
......@@ -114,7 +122,7 @@ static const struct xpad_device {
{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
......@@ -151,6 +159,7 @@ static const struct xpad_device {
{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
......@@ -158,7 +167,7 @@ static const struct xpad_device {
/* buttons shared with xbox and xbox360 */
static const signed short xpad_common_btn[] = {
BTN_A, BTN_B, BTN_X, BTN_Y, /* "analog" buttons */
BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR, /* start/back/sticks */
BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR, /* start/back/sticks */
-1 /* terminating entry */
};
......@@ -168,10 +177,10 @@ static const signed short xpad_btn[] = {
-1 /* terminating entry */
};
/* used when dpad is mapped to nuttons */
/* used when dpad is mapped to buttons */
static const signed short xpad_btn_pad[] = {
BTN_LEFT, BTN_RIGHT, /* d-pad left, right */
BTN_0, BTN_1, /* d-pad up, down (XXX names??) */
BTN_TRIGGER_HAPPY1, BTN_TRIGGER_HAPPY2, /* d-pad left, right */
BTN_TRIGGER_HAPPY3, BTN_TRIGGER_HAPPY4, /* d-pad up, down */
-1 /* terminating entry */
};
......@@ -279,17 +288,19 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
{
struct input_dev *dev = xpad->dev;
/* left stick */
input_report_abs(dev, ABS_X,
(__s16) le16_to_cpup((__le16 *)(data + 12)));
input_report_abs(dev, ABS_Y,
~(__s16) le16_to_cpup((__le16 *)(data + 14)));
/* right stick */
input_report_abs(dev, ABS_RX,
(__s16) le16_to_cpup((__le16 *)(data + 16)));
input_report_abs(dev, ABS_RY,
~(__s16) le16_to_cpup((__le16 *)(data + 18)));
if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
/* left stick */
input_report_abs(dev, ABS_X,
(__s16) le16_to_cpup((__le16 *)(data + 12)));
input_report_abs(dev, ABS_Y,
~(__s16) le16_to_cpup((__le16 *)(data + 14)));
/* right stick */
input_report_abs(dev, ABS_RX,
(__s16) le16_to_cpup((__le16 *)(data + 16)));
input_report_abs(dev, ABS_RY,
~(__s16) le16_to_cpup((__le16 *)(data + 18)));
}
/* triggers left/right */
if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
......@@ -302,10 +313,11 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
/* digital pad */
if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
input_report_key(dev, BTN_LEFT, data[2] & 0x04);
input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
input_report_key(dev, BTN_0, data[2] & 0x01); /* up */
input_report_key(dev, BTN_1, data[2] & 0x02); /* down */
/* dpad as buttons (left, right, up, down) */
input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & 0x04);
input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & 0x08);
input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & 0x01);
input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & 0x02);
} else {
input_report_abs(dev, ABS_HAT0X,
!!(data[2] & 0x08) - !!(data[2] & 0x04));
......@@ -315,7 +327,7 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
/* start/back buttons and stick press left/right */
input_report_key(dev, BTN_START, data[2] & 0x10);
input_report_key(dev, BTN_BACK, data[2] & 0x20);
input_report_key(dev, BTN_SELECT, data[2] & 0x20);
input_report_key(dev, BTN_THUMBL, data[2] & 0x40);
input_report_key(dev, BTN_THUMBR, data[2] & 0x80);
......@@ -349,11 +361,11 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
/* digital pad */
if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
/* dpad as buttons (right, left, down, up) */
input_report_key(dev, BTN_LEFT, data[2] & 0x04);
input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
input_report_key(dev, BTN_0, data[2] & 0x01); /* up */
input_report_key(dev, BTN_1, data[2] & 0x02); /* down */
/* dpad as buttons (left, right, up, down) */
input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & 0x04);
input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & 0x08);
input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & 0x01);
input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & 0x02);
} else {
input_report_abs(dev, ABS_HAT0X,
!!(data[2] & 0x08) - !!(data[2] & 0x04));
......@@ -363,7 +375,7 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
/* start/back buttons */
input_report_key(dev, BTN_START, data[2] & 0x10);
input_report_key(dev, BTN_BACK, data[2] & 0x20);
input_report_key(dev, BTN_SELECT, data[2] & 0x20);
/* stick press left/right */
input_report_key(dev, BTN_THUMBL, data[2] & 0x40);
......@@ -378,17 +390,19 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
input_report_key(dev, BTN_TR, data[3] & 0x02);
input_report_key(dev, BTN_MODE, data[3] & 0x04);
/* left stick */
input_report_abs(dev, ABS_X,
(__s16) le16_to_cpup((__le16 *)(data + 6)));
input_report_abs(dev, ABS_Y,
~(__s16) le16_to_cpup((__le16 *)(data + 8)));
/* right stick */
input_report_abs(dev, ABS_RX,
(__s16) le16_to_cpup((__le16 *)(data + 10)));
input_report_abs(dev, ABS_RY,
~(__s16) le16_to_cpup((__le16 *)(data + 12)));
if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
/* left stick */
input_report_abs(dev, ABS_X,
(__s16) le16_to_cpup((__le16 *)(data + 6)));
input_report_abs(dev, ABS_Y,
~(__s16) le16_to_cpup((__le16 *)(data + 8)));
/* right stick */
input_report_abs(dev, ABS_RX,
(__s16) le16_to_cpup((__le16 *)(data + 10)));
input_report_abs(dev, ABS_RY,
~(__s16) le16_to_cpup((__le16 *)(data + 12)));
}
/* triggers left/right */
if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
......@@ -814,6 +828,8 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
xpad->mapping |= MAP_DPAD_TO_BUTTONS;
if (triggers_to_buttons)
xpad->mapping |= MAP_TRIGGERS_TO_BUTTONS;
if (sticks_to_null)
xpad->mapping |= MAP_STICKS_TO_NULL;
}
xpad->dev = input_dev;
......@@ -830,16 +846,20 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
input_dev->open = xpad_open;
input_dev->close = xpad_close;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->evbit[0] = BIT_MASK(EV_KEY);
if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
input_dev->evbit[0] |= BIT_MASK(EV_ABS);
/* set up axes */
for (i = 0; xpad_abs[i] >= 0; i++)
xpad_set_up_abs(input_dev, xpad_abs[i]);
}
/* set up standard buttons and axes */
/* set up standard buttons */
for (i = 0; xpad_common_btn[i] >= 0; i++)
__set_bit(xpad_common_btn[i], input_dev->keybit);
for (i = 0; xpad_abs[i] >= 0; i++)
xpad_set_up_abs(input_dev, xpad_abs[i]);
/* Now set up model-specific ones */
/* set up model-specific ones */
if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W) {
for (i = 0; xpad360_btn[i] >= 0; i++)
__set_bit(xpad360_btn[i], input_dev->keybit);
......
......@@ -297,6 +297,18 @@ config KEYBOARD_MAX7359
To compile this driver as a module, choose M here: the
module will be called max7359_keypad.
config KEYBOARD_MCS
tristate "MELFAS MCS Touchkey"
depends on I2C
help
Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
chip in your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called mcs_touchkey.
config KEYBOARD_IMX
tristate "IMX keypad support"
depends on ARCH_MXC
......@@ -342,6 +354,15 @@ config KEYBOARD_PXA930_ROTARY
To compile this driver as a module, choose M here: the
module will be called pxa930_rotary.
config KEYBOARD_SAMSUNG
tristate "Samsung keypad support"
depends on SAMSUNG_DEV_KEYPAD
help
Say Y here if you want to use the Samsung keypad.
To compile this driver as a module, choose M here: the
module will be called samsung-keypad.
config KEYBOARD_STOWAWAY
tristate "Stowaway keyboard"
select SERIO
......
......@@ -26,12 +26,14 @@ obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o
obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
......
......@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/i2c/adp5588.h>
......@@ -54,6 +55,10 @@
#define KEYP_MAX_EVENT 10
#define MAXGPIO 18
#define ADP_BANK(offs) ((offs) >> 3)
#define ADP_BIT(offs) (1u << ((offs) & 0x7))
/*
* Early pre 4.0 Silicon required to delay readout by at least 25ms,
* since the Event Counter Register updated 25ms after the interrupt
......@@ -67,6 +72,16 @@ struct adp5588_kpad {
struct delayed_work work;
unsigned long delay;
unsigned short keycode[ADP5588_KEYMAPSIZE];
const struct adp5588_gpi_map *gpimap;
unsigned short gpimapsize;
#ifdef CONFIG_GPIOLIB
unsigned char gpiomap[MAXGPIO];
bool export_gpio;
struct gpio_chip gc;
struct mutex gpio_lock; /* Protect cached dir, dat_out */
u8 dat_out[3];
u8 dir[3];
#endif
};
static int adp5588_read(struct i2c_client *client, u8 reg)
......@@ -84,12 +99,222 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
return i2c_smbus_write_byte_data(client, reg, val);
}
#ifdef CONFIG_GPIOLIB
static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
{
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
}
static void adp5588_gpio_set_value(struct gpio_chip *chip,
unsigned off, int val)
{
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
mutex_lock(&kpad->gpio_lock);
if (val)
kpad->dat_out[bank] |= bit;
else
kpad->dat_out[bank] &= ~bit;
adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
kpad->dat_out[bank]);
mutex_unlock(&kpad->gpio_lock);
}
static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
{
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
int ret;
mutex_lock(&kpad->gpio_lock);
kpad->dir[bank] &= ~bit;
ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
mutex_unlock(&kpad->gpio_lock);
return ret;
}
static int adp5588_gpio_direction_output(struct gpio_chip *chip,
unsigned off, int val)
{
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
int ret;
mutex_lock(&kpad->gpio_lock);
kpad->dir[bank] |= bit;
if (val)
kpad->dat_out[bank] |= bit;
else
kpad->dat_out[bank] &= ~bit;
ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
kpad->dat_out[bank]);
ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank,
kpad->dir[bank]);
mutex_unlock(&kpad->gpio_lock);
return ret;
}
static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
const struct adp5588_kpad_platform_data *pdata)
{
bool pin_used[MAXGPIO];
int n_unused = 0;
int i;
memset(pin_used, 0, sizeof(pin_used));
for (i = 0; i < pdata->rows; i++)
pin_used[i] = true;
for (i = 0; i < pdata->cols; i++)
pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true;
for (i = 0; i < kpad->gpimapsize; i++)
pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
for (i = 0; i < MAXGPIO; i++)
if (!pin_used[i])
kpad->gpiomap[n_unused++] = i;
return n_unused;
}
static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad)
{
struct device *dev = &kpad->client->dev;
const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
int i, error;
if (!gpio_data)
return 0;
kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata);
if (kpad->gc.ngpio == 0) {
dev_info(dev, "No unused gpios left to export\n");
return 0;
}
kpad->export_gpio = true;
kpad->gc.direction_input = adp5588_gpio_direction_input;
kpad->gc.direction_output = adp5588_gpio_direction_output;
kpad->gc.get = adp5588_gpio_get_value;
kpad->gc.set = adp5588_gpio_set_value;
kpad->gc.can_sleep = 1;
kpad->gc.base = gpio_data->gpio_start;
kpad->gc.label = kpad->client->name;
kpad->gc.owner = THIS_MODULE;
mutex_init(&kpad->gpio_lock);
error = gpiochip_add(&kpad->gc);
if (error) {
dev_err(dev, "gpiochip_add failed, err: %d\n", error);
return error;
}
for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
kpad->dat_out[i] = adp5588_read(kpad->client,
GPIO_DAT_OUT1 + i);
kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
}
if (gpio_data->setup) {
error = gpio_data->setup(kpad->client,
kpad->gc.base, kpad->gc.ngpio,
gpio_data->context);
if (error)
dev_warn(dev, "setup failed, %d\n", error);
}
return 0;
}
static void __devexit adp5588_gpio_remove(struct adp5588_kpad *kpad)
{
struct device *dev = &kpad->client->dev;
const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
int error;
if (!kpad->export_gpio)
return;
if (gpio_data->teardown) {
error = gpio_data->teardown(kpad->client,
kpad->gc.base, kpad->gc.ngpio,
gpio_data->context);
if (error)
dev_warn(dev, "teardown failed %d\n", error);
}
error = gpiochip_remove(&kpad->gc);
if (error)
dev_warn(dev, "gpiochip_remove failed %d\n", error);
}
#else
static inline int adp5588_gpio_add(struct adp5588_kpad *kpad)
{
return 0;
}
static inline void adp5588_gpio_remove(struct adp5588_kpad *kpad)
{
}
#endif
static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
{
int i, j;
for (i = 0; i < ev_cnt; i++) {
int key = adp5588_read(kpad->client, Key_EVENTA + i);
int key_val = key & KEY_EV_MASK;
if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) {
for (j = 0; j < kpad->gpimapsize; j++) {
if (key_val == kpad->gpimap[j].pin) {
input_report_switch(kpad->input,
kpad->gpimap[j].sw_evt,
key & KEY_EV_PRESSED);
break;
}
}
} else {
input_report_key(kpad->input,
kpad->keycode[key_val - 1],
key & KEY_EV_PRESSED);
}
}
}
static void adp5588_work(struct work_struct *work)
{
struct adp5588_kpad *kpad = container_of(work,
struct adp5588_kpad, work.work);
struct i2c_client *client = kpad->client;
int i, key, status, ev_cnt;
int status, ev_cnt;
status = adp5588_read(client, INT_STAT);
......@@ -99,12 +324,7 @@ static void adp5588_work(struct work_struct *work)
if (status & KE_INT) {
ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
if (ev_cnt) {
for (i = 0; i < ev_cnt; i++) {
key = adp5588_read(client, Key_EVENTA + i);
input_report_key(kpad->input,
kpad->keycode[(key & KEY_EV_MASK) - 1],
key & KEY_EV_PRESSED);
}
adp5588_report_events(kpad, ev_cnt);
input_sync(kpad->input);
}
}
......@@ -128,8 +348,10 @@ static irqreturn_t adp5588_irq(int irq, void *handle)
static int __devinit adp5588_setup(struct i2c_client *client)
{
struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
int i, ret;
unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
......@@ -144,6 +366,32 @@ static int __devinit adp5588_setup(struct i2c_client *client)
for (i = 0; i < KEYP_MAX_EVENT; i++)
ret |= adp5588_read(client, Key_EVENTA);
for (i = 0; i < pdata->gpimapsize; i++) {
unsigned short pin = pdata->gpimap[i].pin;
if (pin <= GPI_PIN_ROW_END) {
evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE));
} else {
evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF);
evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8);
}
}
if (pdata->gpimapsize) {
ret |= adp5588_write(client, GPI_EM1, evt_mode1);
ret |= adp5588_write(client, GPI_EM2, evt_mode2);
ret |= adp5588_write(client, GPI_EM3, evt_mode3);
}
if (gpio_data) {
for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
int pull_mask = gpio_data->pullup_dis_mask;
ret |= adp5588_write(client, GPIO_PULL1 + i,
(pull_mask >> (8 * i)) & 0xFF);
}
}
ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
OVR_FLOW_INT | K_LCK_INT |
GPI_INT | KE_INT); /* Status is W1C */
......@@ -158,11 +406,49 @@ static int __devinit adp5588_setup(struct i2c_client *client)
return 0;
}
static void __devinit adp5588_report_switch_state(struct adp5588_kpad *kpad)
{
int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1);
int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2);
int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3);
int gpi_stat_tmp, pin_loc;
int i;
for (i = 0; i < kpad->gpimapsize; i++) {
unsigned short pin = kpad->gpimap[i].pin;
if (pin <= GPI_PIN_ROW_END) {
gpi_stat_tmp = gpi_stat1;
pin_loc = pin - GPI_PIN_ROW_BASE;
} else if ((pin - GPI_PIN_COL_BASE) < 8) {
gpi_stat_tmp = gpi_stat2;
pin_loc = pin - GPI_PIN_COL_BASE;
} else {
gpi_stat_tmp = gpi_stat3;
pin_loc = pin - GPI_PIN_COL_BASE - 8;
}
if (gpi_stat_tmp < 0) {
dev_err(&kpad->client->dev,
"Can't read GPIO_DAT_STAT switch %d default to OFF\n",
pin);
gpi_stat_tmp = 0;
}
input_report_switch(kpad->input,
kpad->gpimap[i].sw_evt,
!(gpi_stat_tmp & (1 << pin_loc)));
}
input_sync(kpad->input);
}
static int __devinit adp5588_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adp5588_kpad *kpad;
struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
struct input_dev *input;
unsigned int revid;
int ret, i;
......@@ -189,6 +475,37 @@ static int __devinit adp5588_probe(struct i2c_client *client,
return -EINVAL;
}
if (!pdata->gpimap && pdata->gpimapsize) {
dev_err(&client->dev, "invalid gpimap from pdata\n");
return -EINVAL;
}
if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
dev_err(&client->dev, "invalid gpimapsize\n");
return -EINVAL;
}
for (i = 0; i < pdata->gpimapsize; i++) {
unsigned short pin = pdata->gpimap[i].pin;
if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
dev_err(&client->dev, "invalid gpi pin data\n");
return -EINVAL;
}
if (pin <= GPI_PIN_ROW_END) {
if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
dev_err(&client->dev, "invalid gpi row data\n");
return -EINVAL;
}
} else {
if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
dev_err(&client->dev, "invalid gpi col data\n");
return -EINVAL;
}
}
}
if (!client->irq) {
dev_err(&client->dev, "no IRQ?\n");
return -EINVAL;
......@@ -233,6 +550,9 @@ static int __devinit adp5588_probe(struct i2c_client *client,
memcpy(kpad->keycode, pdata->keymap,
pdata->keymapsize * input->keycodesize);
kpad->gpimap = pdata->gpimap;
kpad->gpimapsize = pdata->gpimapsize;
/* setup input device */
__set_bit(EV_KEY, input->evbit);
......@@ -243,6 +563,11 @@ static int __devinit adp5588_probe(struct i2c_client *client,
__set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
__clear_bit(KEY_RESERVED, input->keybit);
if (kpad->gpimapsize)
__set_bit(EV_SW, input->evbit);
for (i = 0; i < kpad->gpimapsize; i++)
__set_bit(kpad->gpimap[i].sw_evt, input->swbit);
error = input_register_device(input);
if (error) {
dev_err(&client->dev, "unable to register input device\n");
......@@ -261,6 +586,13 @@ static int __devinit adp5588_probe(struct i2c_client *client,
if (error)
goto err_free_irq;
if (kpad->gpimapsize)
adp5588_report_switch_state(kpad);
error = adp5588_gpio_add(kpad);
if (error)
goto err_free_irq;
device_init_wakeup(&client->dev, 1);
i2c_set_clientdata(client, kpad);
......@@ -287,6 +619,7 @@ static int __devexit adp5588_remove(struct i2c_client *client)
free_irq(client->irq, kpad);
cancel_delayed_work_sync(&kpad->work);
input_unregister_device(kpad->input);
adp5588_gpio_remove(kpad);
kfree(kpad);
return 0;
......
......@@ -31,6 +31,7 @@ struct gpio_button_data {
struct input_dev *input;
struct timer_list timer;
struct work_struct work;
int timer_debounce; /* in msecs */
bool disabled;
};
......@@ -109,7 +110,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata)
* Disable IRQ and possible debouncing timer.
*/
disable_irq(gpio_to_irq(bdata->button->gpio));
if (bdata->button->debounce_interval)
if (bdata->timer_debounce)
del_timer_sync(&bdata->timer);
bdata->disabled = true;
......@@ -347,9 +348,9 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
BUG_ON(irq != gpio_to_irq(button->gpio));
if (button->debounce_interval)
if (bdata->timer_debounce)
mod_timer(&bdata->timer,
jiffies + msecs_to_jiffies(button->debounce_interval));
jiffies + msecs_to_jiffies(bdata->timer_debounce));
else
schedule_work(&bdata->work);
......@@ -383,6 +384,14 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
goto fail3;
}
if (button->debounce_interval) {
error = gpio_set_debounce(button->gpio,
button->debounce_interval * 1000);
/* use timer if gpiolib doesn't provide debounce */
if (error < 0)
bdata->timer_debounce = button->debounce_interval;
}
irq = gpio_to_irq(button->gpio);
if (irq < 0) {
error = irq;
......@@ -498,7 +507,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
fail2:
while (--i >= 0) {
free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
if (pdata->buttons[i].debounce_interval)
if (ddata->data[i].timer_debounce)
del_timer_sync(&ddata->data[i].timer);
cancel_work_sync(&ddata->data[i].work);
gpio_free(pdata->buttons[i].gpio);
......@@ -526,7 +535,7 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
for (i = 0; i < pdata->nbuttons; i++) {
int irq = gpio_to_irq(pdata->buttons[i].gpio);
free_irq(irq, &ddata->data[i]);
if (pdata->buttons[i].debounce_interval)
if (ddata->data[i].timer_debounce)
del_timer_sync(&ddata->data[i].timer);
cancel_work_sync(&ddata->data[i].work);
gpio_free(pdata->buttons[i].gpio);
......
......@@ -642,6 +642,7 @@ static int __devinit lm8323_probe(struct i2c_client *client,
struct lm8323_platform_data *pdata = client->dev.platform_data;
struct input_dev *idev;
struct lm8323_chip *lm;
int pwm;
int i, err;
unsigned long tmo;
u8 data[2];
......@@ -710,8 +711,9 @@ static int __devinit lm8323_probe(struct i2c_client *client,
goto fail1;
}
for (i = 0; i < LM8323_NUM_PWMS; i++) {
err = init_pwm(lm, i + 1, &client->dev, pdata->pwm_names[i]);
for (pwm = 0; pwm < LM8323_NUM_PWMS; pwm++) {
err = init_pwm(lm, pwm + 1, &client->dev,
pdata->pwm_names[pwm]);
if (err < 0)
goto fail2;
}
......@@ -764,9 +766,9 @@ static int __devinit lm8323_probe(struct i2c_client *client,
fail3:
device_remove_file(&client->dev, &dev_attr_disable_kp);
fail2:
while (--i >= 0)
if (lm->pwm[i].enabled)
led_classdev_unregister(&lm->pwm[i].cdev);
while (--pwm >= 0)
if (lm->pwm[pwm].enabled)
led_classdev_unregister(&lm->pwm[pwm].cdev);
fail1:
input_free_device(idev);
kfree(lm);
......
......@@ -37,6 +37,7 @@ struct matrix_keypad {
spinlock_t lock;
bool scan_pending;
bool stopped;
bool gpio_all_disabled;
};
/*
......@@ -87,8 +88,12 @@ static void enable_row_irqs(struct matrix_keypad *keypad)
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
int i;
for (i = 0; i < pdata->num_row_gpios; i++)
enable_irq(gpio_to_irq(pdata->row_gpios[i]));
if (pdata->clustered_irq > 0)
enable_irq(pdata->clustered_irq);
else {
for (i = 0; i < pdata->num_row_gpios; i++)
enable_irq(gpio_to_irq(pdata->row_gpios[i]));
}
}
static void disable_row_irqs(struct matrix_keypad *keypad)
......@@ -96,8 +101,12 @@ static void disable_row_irqs(struct matrix_keypad *keypad)
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
int i;
for (i = 0; i < pdata->num_row_gpios; i++)
disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
if (pdata->clustered_irq > 0)
disable_irq_nosync(pdata->clustered_irq);
else {
for (i = 0; i < pdata->num_row_gpios; i++)
disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
}
}
/*
......@@ -216,45 +225,69 @@ static void matrix_keypad_stop(struct input_dev *dev)
}
#ifdef CONFIG_PM
static int matrix_keypad_suspend(struct device *dev)
static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad)
{
struct platform_device *pdev = to_platform_device(dev);
struct matrix_keypad *keypad = platform_get_drvdata(pdev);
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
unsigned int gpio;
int i;
matrix_keypad_stop(keypad->input_dev);
if (pdata->clustered_irq > 0) {
if (enable_irq_wake(pdata->clustered_irq) == 0)
keypad->gpio_all_disabled = true;
} else {
if (device_may_wakeup(&pdev->dev)) {
for (i = 0; i < pdata->num_row_gpios; i++) {
if (!test_bit(i, keypad->disabled_gpios)) {
unsigned int gpio = pdata->row_gpios[i];
gpio = pdata->row_gpios[i];
if (enable_irq_wake(gpio_to_irq(gpio)) == 0)
__set_bit(i, keypad->disabled_gpios);
}
}
}
return 0;
}
static int matrix_keypad_resume(struct device *dev)
static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad)
{
struct platform_device *pdev = to_platform_device(dev);
struct matrix_keypad *keypad = platform_get_drvdata(pdev);
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
unsigned int gpio;
int i;
if (device_may_wakeup(&pdev->dev)) {
if (pdata->clustered_irq > 0) {
if (keypad->gpio_all_disabled) {
disable_irq_wake(pdata->clustered_irq);
keypad->gpio_all_disabled = false;
}
} else {
for (i = 0; i < pdata->num_row_gpios; i++) {
if (test_and_clear_bit(i, keypad->disabled_gpios)) {
unsigned int gpio = pdata->row_gpios[i];
gpio = pdata->row_gpios[i];
disable_irq_wake(gpio_to_irq(gpio));
}
}
}
}
static int matrix_keypad_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct matrix_keypad *keypad = platform_get_drvdata(pdev);
matrix_keypad_stop(keypad->input_dev);
if (device_may_wakeup(&pdev->dev))
matrix_keypad_enable_wakeup(keypad);
return 0;
}
static int matrix_keypad_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct matrix_keypad *keypad = platform_get_drvdata(pdev);
if (device_may_wakeup(&pdev->dev))
matrix_keypad_disable_wakeup(keypad);
matrix_keypad_start(keypad->input_dev);
......@@ -296,17 +329,31 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,
gpio_direction_input(pdata->row_gpios[i]);
}
for (i = 0; i < pdata->num_row_gpios; i++) {
err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
if (pdata->clustered_irq > 0) {
err = request_irq(pdata->clustered_irq,
matrix_keypad_interrupt,
IRQF_DISABLED |
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
pdata->clustered_irq_flags,
"matrix-keypad", keypad);
if (err) {
dev_err(&pdev->dev,
"Unable to acquire interrupt for GPIO line %i\n",
pdata->row_gpios[i]);
goto err_free_irqs;
"Unable to acquire clustered interrupt\n");
goto err_free_rows;
}
} else {
for (i = 0; i < pdata->num_row_gpios; i++) {
err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
matrix_keypad_interrupt,
IRQF_DISABLED |
IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
"matrix-keypad", keypad);
if (err) {
dev_err(&pdev->dev,
"Unable to acquire interrupt "
"for GPIO line %i\n",
pdata->row_gpios[i]);
goto err_free_irqs;
}
}
}
......@@ -418,11 +465,16 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
for (i = 0; i < pdata->num_row_gpios; i++) {
free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
gpio_free(pdata->row_gpios[i]);
if (pdata->clustered_irq > 0) {
free_irq(pdata->clustered_irq, keypad);
} else {
for (i = 0; i < pdata->num_row_gpios; i++)
free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
}
for (i = 0; i < pdata->num_row_gpios; i++)
gpio_free(pdata->row_gpios[i]);
for (i = 0; i < pdata->num_col_gpios; i++)
gpio_free(pdata->col_gpios[i]);
......
/*
* mcs_touchkey.c - Touchkey driver for MELFAS MCS5000/5080 controller
*
* Copyright (C) 2010 Samsung Electronics Co.Ltd
* Author: HeungJun Kim <riverful.kim@samsung.com>
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c/mcs.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/irq.h>
#include <linux/slab.h>
/* MCS5000 Touchkey */
#define MCS5000_TOUCHKEY_STATUS 0x04
#define MCS5000_TOUCHKEY_STATUS_PRESS 7
#define MCS5000_TOUCHKEY_FW 0x0a
#define MCS5000_TOUCHKEY_BASE_VAL 0x61
/* MCS5080 Touchkey */
#define MCS5080_TOUCHKEY_STATUS 0x00
#define MCS5080_TOUCHKEY_STATUS_PRESS 3
#define MCS5080_TOUCHKEY_FW 0x01
#define MCS5080_TOUCHKEY_BASE_VAL 0x1
enum mcs_touchkey_type {
MCS5000_TOUCHKEY,
MCS5080_TOUCHKEY,
};
struct mcs_touchkey_chip {
unsigned int status_reg;
unsigned int pressbit;
unsigned int press_invert;
unsigned int baseval;
};
struct mcs_touchkey_data {
struct i2c_client *client;
struct input_dev *input_dev;
struct mcs_touchkey_chip chip;
unsigned int key_code;
unsigned int key_val;
unsigned short keycodes[];
};
static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id)
{
struct mcs_touchkey_data *data = dev_id;
struct mcs_touchkey_chip *chip = &data->chip;
struct i2c_client *client = data->client;
struct input_dev *input = data->input_dev;
unsigned int key_val;
unsigned int pressed;
int val;
val = i2c_smbus_read_byte_data(client, chip->status_reg);
if (val < 0) {
dev_err(&client->dev, "i2c read error [%d]\n", val);
goto out;
}
pressed = (val & (1 << chip->pressbit)) >> chip->pressbit;
if (chip->press_invert)
pressed ^= chip->press_invert;
/* key_val is 0 when released, so we should use key_val of press. */
if (pressed) {
key_val = val & (0xff >> (8 - chip->pressbit));
if (!key_val)
goto out;
key_val -= chip->baseval;
data->key_code = data->keycodes[key_val];
data->key_val = key_val;
}
input_event(input, EV_MSC, MSC_SCAN, data->key_val);
input_report_key(input, data->key_code, pressed);
input_sync(input);
dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code,
pressed ? "pressed" : "released");
out:
return IRQ_HANDLED;
}
static int __devinit mcs_touchkey_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
const struct mcs_platform_data *pdata;
struct mcs_touchkey_data *data;
struct input_dev *input_dev;
unsigned int fw_reg;
int fw_ver;
int error;
int i;
pdata = client->dev.platform_data;
if (!pdata) {
dev_err(&client->dev, "no platform data defined\n");
return -EINVAL;
}
data = kzalloc(sizeof(struct mcs_touchkey_data) +
sizeof(data->keycodes[0]) * (pdata->key_maxval + 1),
GFP_KERNEL);
input_dev = input_allocate_device();
if (!data || !input_dev) {
dev_err(&client->dev, "Failed to allocate memory\n");
error = -ENOMEM;
goto err_free_mem;
}
data->client = client;
data->input_dev = input_dev;
if (id->driver_data == MCS5000_TOUCHKEY) {
data->chip.status_reg = MCS5000_TOUCHKEY_STATUS;
data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS;
data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL;
fw_reg = MCS5000_TOUCHKEY_FW;
} else {
data->chip.status_reg = MCS5080_TOUCHKEY_STATUS;
data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS;
data->chip.press_invert = 1;
data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL;
fw_reg = MCS5080_TOUCHKEY_FW;
}
fw_ver = i2c_smbus_read_byte_data(client, fw_reg);
if (fw_ver < 0) {
error = fw_ver;
dev_err(&client->dev, "i2c read error[%d]\n", error);
goto err_free_mem;
}
dev_info(&client->dev, "Firmware version: %d\n", fw_ver);
input_dev->name = "MELPAS MCS Touchkey";
input_dev->id.bustype = BUS_I2C;
input_dev->dev.parent = &client->dev;
input_dev->evbit[0] = BIT_MASK(EV_KEY);
if (!pdata->no_autorepeat)
input_dev->evbit[0] |= BIT_MASK(EV_REP);
input_dev->keycode = data->keycodes;
input_dev->keycodesize = sizeof(data->keycodes[0]);
input_dev->keycodemax = pdata->key_maxval + 1;
for (i = 0; i < pdata->keymap_size; i++) {
unsigned int val = MCS_KEY_VAL(pdata->keymap[i]);
unsigned int code = MCS_KEY_CODE(pdata->keymap[i]);
data->keycodes[val] = code;
__set_bit(code, input_dev->keybit);
}
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
input_set_drvdata(input_dev, data);
if (pdata->cfg_pin)
pdata->cfg_pin();
error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt,
IRQF_TRIGGER_FALLING, client->dev.driver->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
goto err_free_mem;
}
error = input_register_device(input_dev);
if (error)
goto err_free_irq;
i2c_set_clientdata(client, data);
return 0;
err_free_irq:
free_irq(client->irq, data);
err_free_mem:
input_free_device(input_dev);
kfree(data);
return error;
}
static int __devexit mcs_touchkey_remove(struct i2c_client *client)
{
struct mcs_touchkey_data *data = i2c_get_clientdata(client);
free_irq(client->irq, data);
input_unregister_device(data->input_dev);
kfree(data);
return 0;
}
static const struct i2c_device_id mcs_touchkey_id[] = {
{ "mcs5000_touchkey", MCS5000_TOUCHKEY },
{ "mcs5080_touchkey", MCS5080_TOUCHKEY },
{ }
};
MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id);
static struct i2c_driver mcs_touchkey_driver = {
.driver = {
.name = "mcs_touchkey",
.owner = THIS_MODULE,
},
.probe = mcs_touchkey_probe,
.remove = __devexit_p(mcs_touchkey_remove),
.id_table = mcs_touchkey_id,
};
static int __init mcs_touchkey_init(void)
{
return i2c_add_driver(&mcs_touchkey_driver);
}
static void __exit mcs_touchkey_exit(void)
{
i2c_del_driver(&mcs_touchkey_driver);
}
module_init(mcs_touchkey_init);
module_exit(mcs_touchkey_exit);
/* Module information */
MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>");
MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller");
MODULE_LICENSE("GPL");
/*
* Samsung keypad driver
*
* Copyright (C) 2010 Samsung Electronics Co.Ltd
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
* Author: Donghwa Lee <dh09.lee@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <plat/keypad.h>
#define SAMSUNG_KEYIFCON 0x00
#define SAMSUNG_KEYIFSTSCLR 0x04
#define SAMSUNG_KEYIFCOL 0x08
#define SAMSUNG_KEYIFROW 0x0c
#define SAMSUNG_KEYIFFC 0x10
/* SAMSUNG_KEYIFCON */
#define SAMSUNG_KEYIFCON_INT_F_EN (1 << 0)
#define SAMSUNG_KEYIFCON_INT_R_EN (1 << 1)
#define SAMSUNG_KEYIFCON_DF_EN (1 << 2)
#define SAMSUNG_KEYIFCON_FC_EN (1 << 3)
#define SAMSUNG_KEYIFCON_WAKEUPEN (1 << 4)
/* SAMSUNG_KEYIFSTSCLR */
#define SAMSUNG_KEYIFSTSCLR_P_INT_MASK (0xff << 0)
#define SAMSUNG_KEYIFSTSCLR_R_INT_MASK (0xff << 8)
#define SAMSUNG_KEYIFSTSCLR_R_INT_OFFSET 8
#define S5PV210_KEYIFSTSCLR_P_INT_MASK (0x3fff << 0)
#define S5PV210_KEYIFSTSCLR_R_INT_MASK (0x3fff << 16)
#define S5PV210_KEYIFSTSCLR_R_INT_OFFSET 16
/* SAMSUNG_KEYIFCOL */
#define SAMSUNG_KEYIFCOL_MASK (0xff << 0)
#define S5PV210_KEYIFCOLEN_MASK (0xff << 8)
/* SAMSUNG_KEYIFROW */
#define SAMSUNG_KEYIFROW_MASK (0xff << 0)
#define S5PV210_KEYIFROW_MASK (0x3fff << 0)
/* SAMSUNG_KEYIFFC */
#define SAMSUNG_KEYIFFC_MASK (0x3ff << 0)
enum samsung_keypad_type {
KEYPAD_TYPE_SAMSUNG,
KEYPAD_TYPE_S5PV210,
};
struct samsung_keypad {
struct input_dev *input_dev;
struct clk *clk;
void __iomem *base;
wait_queue_head_t wait;
bool stopped;
int irq;
unsigned int row_shift;
unsigned int rows;
unsigned int cols;
unsigned int row_state[SAMSUNG_MAX_COLS];
unsigned short keycodes[];
};
static int samsung_keypad_is_s5pv210(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
enum samsung_keypad_type type =
platform_get_device_id(pdev)->driver_data;
return type == KEYPAD_TYPE_S5PV210;
}
static void samsung_keypad_scan(struct samsung_keypad *keypad,
unsigned int *row_state)
{
struct device *dev = keypad->input_dev->dev.parent;
unsigned int col;
unsigned int val;
for (col = 0; col < keypad->cols; col++) {
if (samsung_keypad_is_s5pv210(dev)) {
val = S5PV210_KEYIFCOLEN_MASK;
val &= ~(1 << col) << 8;
} else {
val = SAMSUNG_KEYIFCOL_MASK;
val &= ~(1 << col);
}
writel(val, keypad->base + SAMSUNG_KEYIFCOL);
mdelay(1);
val = readl(keypad->base + SAMSUNG_KEYIFROW);
row_state[col] = ~val & ((1 << keypad->rows) - 1);
}
/* KEYIFCOL reg clear */
writel(0, keypad->base + SAMSUNG_KEYIFCOL);
}
static bool samsung_keypad_report(struct samsung_keypad *keypad,
unsigned int *row_state)
{
struct input_dev *input_dev = keypad->input_dev;
unsigned int changed;
unsigned int pressed;
unsigned int key_down = 0;
unsigned int val;
unsigned int col, row;
for (col = 0; col < keypad->cols; col++) {
changed = row_state[col] ^ keypad->row_state[col];
key_down |= row_state[col];
if (!changed)
continue;
for (row = 0; row < keypad->rows; row++) {
if (!(changed & (1 << row)))
continue;
pressed = row_state[col] & (1 << row);
dev_dbg(&keypad->input_dev->dev,
"key %s, row: %d, col: %d\n",
pressed ? "pressed" : "released", row, col);
val = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
input_event(input_dev, EV_MSC, MSC_SCAN, val);
input_report_key(input_dev,
keypad->keycodes[val], pressed);
}
input_sync(keypad->input_dev);
}
memcpy(keypad->row_state, row_state, sizeof(keypad->row_state));
return key_down;
}
static irqreturn_t samsung_keypad_irq(int irq, void *dev_id)
{
struct samsung_keypad *keypad = dev_id;
unsigned int row_state[SAMSUNG_MAX_COLS];
unsigned int val;
bool key_down;
do {
val = readl(keypad->base + SAMSUNG_KEYIFSTSCLR);
/* Clear interrupt. */
writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR);
samsung_keypad_scan(keypad, row_state);
key_down = samsung_keypad_report(keypad, row_state);
if (key_down)
wait_event_timeout(keypad->wait, keypad->stopped,
msecs_to_jiffies(50));
} while (key_down && !keypad->stopped);
return IRQ_HANDLED;
}
static void samsung_keypad_start(struct samsung_keypad *keypad)
{
unsigned int val;
/* Tell IRQ thread that it may poll the device. */
keypad->stopped = false;
clk_enable(keypad->clk);
/* Enable interrupt bits. */
val = readl(keypad->base + SAMSUNG_KEYIFCON);
val |= SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN;
writel(val, keypad->base + SAMSUNG_KEYIFCON);
/* KEYIFCOL reg clear. */
writel(0, keypad->base + SAMSUNG_KEYIFCOL);
}
static void samsung_keypad_stop(struct samsung_keypad *keypad)
{
unsigned int val;
/* Signal IRQ thread to stop polling and disable the handler. */
keypad->stopped = true;
wake_up(&keypad->wait);
disable_irq(keypad->irq);
/* Clear interrupt. */
writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR);
/* Disable interrupt bits. */
val = readl(keypad->base + SAMSUNG_KEYIFCON);
val &= ~(SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN);
writel(val, keypad->base + SAMSUNG_KEYIFCON);
clk_disable(keypad->clk);
/*
* Now that chip should not generate interrupts we can safely
* re-enable the handler.
*/
enable_irq(keypad->irq);
}
static int samsung_keypad_open(struct input_dev *input_dev)
{
struct samsung_keypad *keypad = input_get_drvdata(input_dev);
samsung_keypad_start(keypad);
return 0;
}
static void samsung_keypad_close(struct input_dev *input_dev)
{
struct samsung_keypad *keypad = input_get_drvdata(input_dev);
samsung_keypad_stop(keypad);
}
static int __devinit samsung_keypad_probe(struct platform_device *pdev)
{
const struct samsung_keypad_platdata *pdata;
const struct matrix_keymap_data *keymap_data;
struct samsung_keypad *keypad;
struct resource *res;
struct input_dev *input_dev;
unsigned int row_shift;
unsigned int keymap_size;
int error;
pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "no platform data defined\n");
return -EINVAL;
}
keymap_data = pdata->keymap_data;
if (!keymap_data) {
dev_err(&pdev->dev, "no keymap data defined\n");
return -EINVAL;
}
if (!pdata->rows || pdata->rows > SAMSUNG_MAX_ROWS)
return -EINVAL;
if (!pdata->cols || pdata->cols > SAMSUNG_MAX_COLS)
return -EINVAL;
/* initialize the gpio */
if (pdata->cfg_gpio)
pdata->cfg_gpio(pdata->rows, pdata->cols);
row_shift = get_count_order(pdata->cols);
keymap_size = (pdata->rows << row_shift) * sizeof(keypad->keycodes[0]);
keypad = kzalloc(sizeof(*keypad) + keymap_size, GFP_KERNEL);
input_dev = input_allocate_device();
if (!keypad || !input_dev) {
error = -ENOMEM;
goto err_free_mem;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
error = -ENODEV;
goto err_free_mem;
}
keypad->base = ioremap(res->start, resource_size(res));
if (!keypad->base) {
error = -EBUSY;
goto err_free_mem;
}
keypad->clk = clk_get(&pdev->dev, "keypad");
if (IS_ERR(keypad->clk)) {
dev_err(&pdev->dev, "failed to get keypad clk\n");
error = PTR_ERR(keypad->clk);
goto err_unmap_base;
}
keypad->input_dev = input_dev;
keypad->row_shift = row_shift;
keypad->rows = pdata->rows;
keypad->cols = pdata->cols;
init_waitqueue_head(&keypad->wait);
input_dev->name = pdev->name;
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &pdev->dev;
input_set_drvdata(input_dev, keypad);
input_dev->open = samsung_keypad_open;
input_dev->close = samsung_keypad_close;
input_dev->evbit[0] = BIT_MASK(EV_KEY);
if (!pdata->no_autorepeat)
input_dev->evbit[0] |= BIT_MASK(EV_REP);
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
input_dev->keycode = keypad->keycodes;
input_dev->keycodesize = sizeof(keypad->keycodes[0]);
input_dev->keycodemax = pdata->rows << row_shift;
matrix_keypad_build_keymap(keymap_data, row_shift,
input_dev->keycode, input_dev->keybit);
keypad->irq = platform_get_irq(pdev, 0);
if (keypad->irq < 0) {
error = keypad->irq;
goto err_put_clk;
}
error = request_threaded_irq(keypad->irq, NULL, samsung_keypad_irq,
IRQF_ONESHOT, dev_name(&pdev->dev), keypad);
if (error) {
dev_err(&pdev->dev, "failed to register keypad interrupt\n");
goto err_put_clk;
}
error = input_register_device(keypad->input_dev);
if (error)
goto err_free_irq;
device_init_wakeup(&pdev->dev, pdata->wakeup);
platform_set_drvdata(pdev, keypad);
return 0;
err_free_irq:
free_irq(keypad->irq, keypad);
err_put_clk:
clk_put(keypad->clk);
err_unmap_base:
iounmap(keypad->base);
err_free_mem:
input_free_device(input_dev);
kfree(keypad);
return error;
}
static int __devexit samsung_keypad_remove(struct platform_device *pdev)
{
struct samsung_keypad *keypad = platform_get_drvdata(pdev);
device_init_wakeup(&pdev->dev, 0);
platform_set_drvdata(pdev, NULL);
input_unregister_device(keypad->input_dev);
/*
* It is safe to free IRQ after unregistering device because
* samsung_keypad_close will shut off interrupts.
*/
free_irq(keypad->irq, keypad);
clk_put(keypad->clk);
iounmap(keypad->base);
kfree(keypad);
return 0;
}
#ifdef CONFIG_PM
static void samsung_keypad_toggle_wakeup(struct samsung_keypad *keypad,
bool enable)
{
struct device *dev = keypad->input_dev->dev.parent;
unsigned int val;
clk_enable(keypad->clk);
val = readl(keypad->base + SAMSUNG_KEYIFCON);
if (enable) {
val |= SAMSUNG_KEYIFCON_WAKEUPEN;
if (device_may_wakeup(dev))
enable_irq_wake(keypad->irq);
} else {
val &= ~SAMSUNG_KEYIFCON_WAKEUPEN;
if (device_may_wakeup(dev))
disable_irq_wake(keypad->irq);
}
writel(val, keypad->base + SAMSUNG_KEYIFCON);
clk_disable(keypad->clk);
}
static int samsung_keypad_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct samsung_keypad *keypad = platform_get_drvdata(pdev);
struct input_dev *input_dev = keypad->input_dev;
mutex_lock(&input_dev->mutex);
if (input_dev->users)
samsung_keypad_stop(keypad);
samsung_keypad_toggle_wakeup(keypad, true);
mutex_unlock(&input_dev->mutex);
return 0;
}
static int samsung_keypad_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct samsung_keypad *keypad = platform_get_drvdata(pdev);
struct input_dev *input_dev = keypad->input_dev;
mutex_lock(&input_dev->mutex);
samsung_keypad_toggle_wakeup(keypad, false);
if (input_dev->users)
samsung_keypad_start(keypad);
mutex_unlock(&input_dev->mutex);
return 0;
}
static const struct dev_pm_ops samsung_keypad_pm_ops = {
.suspend = samsung_keypad_suspend,
.resume = samsung_keypad_resume,
};
#endif
static struct platform_device_id samsung_keypad_driver_ids[] = {
{
.name = "samsung-keypad",
.driver_data = KEYPAD_TYPE_SAMSUNG,
}, {
.name = "s5pv210-keypad",
.driver_data = KEYPAD_TYPE_S5PV210,
},
{ },
};
MODULE_DEVICE_TABLE(platform, samsung_keypad_driver_ids);
static struct platform_driver samsung_keypad_driver = {
.probe = samsung_keypad_probe,
.remove = __devexit_p(samsung_keypad_remove),
.driver = {
.name = "samsung-keypad",
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &samsung_keypad_pm_ops,
#endif
},
.id_table = samsung_keypad_driver_ids,
};
static int __init samsung_keypad_init(void)
{
return platform_driver_register(&samsung_keypad_driver);
}
module_init(samsung_keypad_init);
static void __exit samsung_keypad_exit(void)
{
platform_driver_unregister(&samsung_keypad_driver);
}
module_exit(samsung_keypad_exit);
MODULE_DESCRIPTION("Samsung keypad driver");
MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:samsung-keypad");
......@@ -327,6 +327,17 @@ config INPUT_PCF8574
To compile this driver as a module, choose M here: the
module will be called pcf8574_keypad.
config INPUT_PWM_BEEPER
tristate "PWM beeper support"
depends on HAVE_PWM
help
Say Y here to get support for PWM based beeper devices.
If unsure, say N.
To compile this driver as a module, choose M here: the module will be
called pwm-beeper.
config INPUT_GPIO_ROTARY_ENCODER
tristate "Rotary encoders connected to GPIO pins"
depends on GPIOLIB && GENERIC_GPIO
......@@ -390,4 +401,41 @@ config INPUT_PCAP
To compile this driver as a module, choose M here: the
module will be called pcap_keys.
config INPUT_ADXL34X
tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer"
default n
help
Say Y here if you have a Accelerometer interface using the
ADXL345/6 controller, and your board-specific initialization
code includes that in its table of devices.
This driver can use either I2C or SPI communication to the
ADXL345/6 controller. Select the appropriate method for
your system.
If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
module will be called adxl34x.
config INPUT_ADXL34X_I2C
tristate "support I2C bus connection"
depends on INPUT_ADXL34X && I2C
default y
help
Say Y here if you have ADXL345/6 hooked to an I2C bus.
To compile this driver as a module, choose M here: the
module will be called adxl34x-i2c.
config INPUT_ADXL34X_SPI
tristate "support SPI bus connection"
depends on INPUT_ADXL34X && SPI
default y
help
Say Y here if you have ADXL345/6 hooked to a SPI bus.
To compile this driver as a module, choose M here: the
module will be called adxl34x-spi.
endif
......@@ -8,6 +8,9 @@ obj-$(CONFIG_INPUT_88PM860X_ONKEY) += 88pm860x_onkey.o
obj-$(CONFIG_INPUT_AD714X) += ad714x.o
obj-$(CONFIG_INPUT_AD714X_I2C) += ad714x-i2c.o
obj-$(CONFIG_INPUT_AD714X_SPI) += ad714x-spi.o
obj-$(CONFIG_INPUT_ADXL34X) += adxl34x.o
obj-$(CONFIG_INPUT_ADXL34X_I2C) += adxl34x-i2c.o
obj-$(CONFIG_INPUT_ADXL34X_SPI) += adxl34x-spi.o
obj-$(CONFIG_INPUT_APANEL) += apanel.o
obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o
obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
......@@ -26,6 +29,7 @@ obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o
obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
......
/*
* ADLX345/346 Three-Axis Digital Accelerometers (I2C Interface)
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#include <linux/input.h> /* BUS_I2C */
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/types.h>
#include "adxl34x.h"
static int adxl34x_smbus_read(struct device *dev, unsigned char reg)
{
struct i2c_client *client = to_i2c_client(dev);
return i2c_smbus_read_byte_data(client, reg);
}
static int adxl34x_smbus_write(struct device *dev,
unsigned char reg, unsigned char val)
{
struct i2c_client *client = to_i2c_client(dev);
return i2c_smbus_write_byte_data(client, reg, val);
}
static int adxl34x_smbus_read_block(struct device *dev,
unsigned char reg, int count,
void *buf)
{
struct i2c_client *client = to_i2c_client(dev);
return i2c_smbus_read_i2c_block_data(client, reg, count, buf);
}
static int adxl34x_i2c_read_block(struct device *dev,
unsigned char reg, int count,
void *buf)
{
struct i2c_client *client = to_i2c_client(dev);
int ret;
ret = i2c_master_send(client, &reg, 1);
if (ret < 0)
return ret;
ret = i2c_master_recv(client, buf, count);
if (ret < 0)
return ret;
if (ret != count)
return -EIO;
return 0;
}
static const struct adxl34x_bus_ops adxl34x_smbus_bops = {
.bustype = BUS_I2C,
.write = adxl34x_smbus_write,
.read = adxl34x_smbus_read,
.read_block = adxl34x_smbus_read_block,
};
static const struct adxl34x_bus_ops adxl34x_i2c_bops = {
.bustype = BUS_I2C,
.write = adxl34x_smbus_write,
.read = adxl34x_smbus_read,
.read_block = adxl34x_i2c_read_block,
};
static int __devinit adxl34x_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adxl34x *ac;
int error;
error = i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA);
if (!error) {
dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
return -EIO;
}
ac = adxl34x_probe(&client->dev, client->irq, false,
i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_I2C_BLOCK) ?
&adxl34x_smbus_bops : &adxl34x_i2c_bops);
if (IS_ERR(ac))
return PTR_ERR(ac);
i2c_set_clientdata(client, ac);
return 0;
}
static int __devexit adxl34x_i2c_remove(struct i2c_client *client)
{
struct adxl34x *ac = i2c_get_clientdata(client);
return adxl34x_remove(ac);
}
#ifdef CONFIG_PM
static int adxl34x_i2c_suspend(struct i2c_client *client, pm_message_t message)
{
struct adxl34x *ac = i2c_get_clientdata(client);
adxl34x_suspend(ac);
return 0;
}
static int adxl34x_i2c_resume(struct i2c_client *client)
{
struct adxl34x *ac = i2c_get_clientdata(client);
adxl34x_resume(ac);
return 0;
}
#else
# define adxl34x_i2c_suspend NULL
# define adxl34x_i2c_resume NULL
#endif
static const struct i2c_device_id adxl34x_id[] = {
{ "adxl34x", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, adxl34x_id);
static struct i2c_driver adxl34x_driver = {
.driver = {
.name = "adxl34x",
.owner = THIS_MODULE,
},
.probe = adxl34x_i2c_probe,
.remove = __devexit_p(adxl34x_i2c_remove),
.suspend = adxl34x_i2c_suspend,
.resume = adxl34x_i2c_resume,
.id_table = adxl34x_id,
};
static int __init adxl34x_i2c_init(void)
{
return i2c_add_driver(&adxl34x_driver);
}
module_init(adxl34x_i2c_init);
static void __exit adxl34x_i2c_exit(void)
{
i2c_del_driver(&adxl34x_driver);
}
module_exit(adxl34x_i2c_exit);
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer I2C Bus Driver");
MODULE_LICENSE("GPL");
/*
* ADLX345/346 Three-Axis Digital Accelerometers (SPI Interface)
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#include <linux/input.h> /* BUS_SPI */
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
#include "adxl34x.h"
#define MAX_SPI_FREQ_HZ 5000000
#define MAX_FREQ_NO_FIFODELAY 1500000
#define ADXL34X_CMD_MULTB (1 << 6)
#define ADXL34X_CMD_READ (1 << 7)
#define ADXL34X_WRITECMD(reg) (reg & 0x3F)
#define ADXL34X_READCMD(reg) (ADXL34X_CMD_READ | (reg & 0x3F))
#define ADXL34X_READMB_CMD(reg) (ADXL34X_CMD_READ | ADXL34X_CMD_MULTB \
| (reg & 0x3F))
static int adxl34x_spi_read(struct device *dev, unsigned char reg)
{
struct spi_device *spi = to_spi_device(dev);
unsigned char cmd;
cmd = ADXL34X_READCMD(reg);
return spi_w8r8(spi, cmd);
}
static int adxl34x_spi_write(struct device *dev,
unsigned char reg, unsigned char val)
{
struct spi_device *spi = to_spi_device(dev);
unsigned char buf[2];
buf[0] = ADXL34X_WRITECMD(reg);
buf[1] = val;
return spi_write(spi, buf, sizeof(buf));
}
static int adxl34x_spi_read_block(struct device *dev,
unsigned char reg, int count,
void *buf)
{
struct spi_device *spi = to_spi_device(dev);
ssize_t status;
reg = ADXL34X_READMB_CMD(reg);
status = spi_write_then_read(spi, &reg, 1, buf, count);
return (status < 0) ? status : 0;
}
static const struct adxl34x_bus_ops adx134x_spi_bops = {
.bustype = BUS_SPI,
.write = adxl34x_spi_write,
.read = adxl34x_spi_read,
.read_block = adxl34x_spi_read_block,
};
static int __devinit adxl34x_spi_probe(struct spi_device *spi)
{
struct adxl34x *ac;
/* don't exceed max specified SPI CLK frequency */
if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
dev_err(&spi->dev, "SPI CLK %d Hz too fast\n", spi->max_speed_hz);
return -EINVAL;
}
ac = adxl34x_probe(&spi->dev, spi->irq,
spi->max_speed_hz > MAX_FREQ_NO_FIFODELAY,
&adx134x_spi_bops);
if (IS_ERR(ac))
return PTR_ERR(ac);
spi_set_drvdata(spi, ac);
return 0;
}
static int __devexit adxl34x_spi_remove(struct spi_device *spi)
{
struct adxl34x *ac = dev_get_drvdata(&spi->dev);
return adxl34x_remove(ac);
}
#ifdef CONFIG_PM
static int adxl34x_spi_suspend(struct spi_device *spi, pm_message_t message)
{
struct adxl34x *ac = dev_get_drvdata(&spi->dev);
adxl34x_suspend(ac);
return 0;
}
static int adxl34x_spi_resume(struct spi_device *spi)
{
struct adxl34x *ac = dev_get_drvdata(&spi->dev);
adxl34x_resume(ac);
return 0;
}
#else
# define adxl34x_spi_suspend NULL
# define adxl34x_spi_resume NULL
#endif
static struct spi_driver adxl34x_driver = {
.driver = {
.name = "adxl34x",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = adxl34x_spi_probe,
.remove = __devexit_p(adxl34x_spi_remove),
.suspend = adxl34x_spi_suspend,
.resume = adxl34x_spi_resume,
};
static int __init adxl34x_spi_init(void)
{
return spi_register_driver(&adxl34x_driver);
}
module_init(adxl34x_spi_init);
static void __exit adxl34x_spi_exit(void)
{
spi_unregister_driver(&adxl34x_driver);
}
module_exit(adxl34x_spi_exit);
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer SPI Bus Driver");
MODULE_LICENSE("GPL");
此差异已折叠。
/*
* ADXL345/346 Three-Axis Digital Accelerometers (I2C/SPI Interface)
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Copyright (C) 2009 Michael Hennerich, Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#ifndef _ADXL34X_H_
#define _ADXL34X_H_
struct device;
struct adxl34x;
struct adxl34x_bus_ops {
u16 bustype;
int (*read)(struct device *, unsigned char);
int (*read_block)(struct device *, unsigned char, int, void *);
int (*write)(struct device *, unsigned char, unsigned char);
};
void adxl34x_suspend(struct adxl34x *ac);
void adxl34x_resume(struct adxl34x *ac);
struct adxl34x *adxl34x_probe(struct device *dev, int irq,
bool fifo_delay_default,
const struct adxl34x_bus_ops *bops);
int adxl34x_remove(struct adxl34x *ac);
#endif
......@@ -21,6 +21,8 @@
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
......@@ -60,12 +62,11 @@ static acpi_status acpi_atlas_button_handler(u32 function,
input_report_key(input_dev, atlas_keymap[code], key_down);
input_sync(input_dev);
status = 0;
status = AE_OK;
} else {
printk(KERN_WARNING "atlas: shrugged on unexpected function"
":function=%x,address=%lx,value=%x\n",
pr_warn("shrugged on unexpected function: function=%x,address=%lx,value=%x\n",
function, (unsigned long)address, (u32)*value);
status = -EINVAL;
status = AE_BAD_PARAMETER;
}
return status;
......@@ -79,7 +80,7 @@ static int atlas_acpi_button_add(struct acpi_device *device)
input_dev = input_allocate_device();
if (!input_dev) {
printk(KERN_ERR "atlas: unable to allocate input device\n");
pr_err("unable to allocate input device\n");
return -ENOMEM;
}
......@@ -102,7 +103,7 @@ static int atlas_acpi_button_add(struct acpi_device *device)
err = input_register_device(input_dev);
if (err) {
printk(KERN_ERR "atlas: couldn't register input device\n");
pr_err("couldn't register input device\n");
input_free_device(input_dev);
return err;
}
......@@ -112,12 +113,12 @@ static int atlas_acpi_button_add(struct acpi_device *device)
0x81, &acpi_atlas_button_handler,
&acpi_atlas_button_setup, device);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR "Atlas: Error installing addr spc handler\n");
pr_err("error installing addr spc handler\n");
input_unregister_device(input_dev);
status = -EINVAL;
err = -EINVAL;
}
return status;
return err;
}
static int atlas_acpi_button_remove(struct acpi_device *device, int type)
......@@ -126,14 +127,12 @@ static int atlas_acpi_button_remove(struct acpi_device *device, int type)
status = acpi_remove_address_space_handler(device->handle,
0x81, &acpi_atlas_button_handler);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR "Atlas: Error removing addr spc handler\n");
status = -EINVAL;
}
if (ACPI_FAILURE(status))
pr_err("error removing addr spc handler\n");
input_unregister_device(input_dev);
return status;
return 0;
}
static const struct acpi_device_id atlas_device_ids[] = {
......@@ -145,6 +144,7 @@ MODULE_DEVICE_TABLE(acpi, atlas_device_ids);
static struct acpi_driver atlas_acpi_driver = {
.name = ACPI_ATLAS_NAME,
.class = ACPI_ATLAS_CLASS,
.owner = THIS_MODULE,
.ids = atlas_device_ids,
.ops = {
.add = atlas_acpi_button_add,
......@@ -154,18 +154,10 @@ static struct acpi_driver atlas_acpi_driver = {
static int __init atlas_acpi_init(void)
{
int result;
if (acpi_disabled)
return -ENODEV;
result = acpi_bus_register_driver(&atlas_acpi_driver);
if (result < 0) {
printk(KERN_ERR "Atlas ACPI: Unable to register driver\n");
return -ENODEV;
}
return 0;
return acpi_bus_register_driver(&atlas_acpi_driver);
}
static void __exit atlas_acpi_exit(void)
......
此差异已折叠。
......@@ -52,7 +52,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr)
return IRQ_HANDLED;
}
static int __devinit twl4030_pwrbutton_probe(struct platform_device *pdev)
static int __init twl4030_pwrbutton_probe(struct platform_device *pdev)
{
struct input_dev *pwr;
int irq = platform_get_irq(pdev, 0);
......@@ -95,7 +95,7 @@ static int __devinit twl4030_pwrbutton_probe(struct platform_device *pdev)
return err;
}
static int __devexit twl4030_pwrbutton_remove(struct platform_device *pdev)
static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
{
struct input_dev *pwr = platform_get_drvdata(pdev);
int irq = platform_get_irq(pdev, 0);
......@@ -106,9 +106,8 @@ static int __devexit twl4030_pwrbutton_remove(struct platform_device *pdev)
return 0;
}
struct platform_driver twl4030_pwrbutton_driver = {
.probe = twl4030_pwrbutton_probe,
.remove = __devexit_p(twl4030_pwrbutton_remove),
static struct platform_driver twl4030_pwrbutton_driver = {
.remove = __exit_p(twl4030_pwrbutton_remove),
.driver = {
.name = "twl4030_pwrbutton",
.owner = THIS_MODULE,
......@@ -117,7 +116,8 @@ struct platform_driver twl4030_pwrbutton_driver = {
static int __init twl4030_pwrbutton_init(void)
{
return platform_driver_register(&twl4030_pwrbutton_driver);
return platform_driver_probe(&twl4030_pwrbutton_driver,
twl4030_pwrbutton_probe);
}
module_init(twl4030_pwrbutton_init);
......
......@@ -1347,7 +1347,7 @@ static int __init wb_module_init(void)
err = map_bios();
if (err)
return err;
goto err_free_keymap;
err = platform_driver_register(&wistron_driver);
if (err)
......@@ -1371,6 +1371,8 @@ static int __init wb_module_init(void)
platform_driver_unregister(&wistron_driver);
err_unmap_bios:
unmap_bios();
err_free_keymap:
kfree(keymap);
return err;
}
......
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
......@@ -43,6 +43,7 @@ enum {
WACOM_G4,
PTU,
PL,
DTU,
INTUOS,
INTUOS3S,
INTUOS3,
......
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册