提交 d5d14ed6 编写于 作者: C Chris Metcalf

arch/tile: Allow tilegx to build with either 16K or 64K page size

This change introduces new flags for the hv_install_context()
API that passes a page table pointer to the hypervisor.  Clients
can explicitly request 4K, 16K, or 64K small pages when they
install a new context.  In practice, the page size is fixed at
kernel compile time and the same size is always requested every
time a new page table is installed.

The <hv/hypervisor.h> header changes so that it provides more abstract
macros for managing "page" things like PFNs and page tables.  For
example there is now a HV_DEFAULT_PAGE_SIZE_SMALL instead of the old
HV_PAGE_SIZE_SMALL.  The various PFN routines have been eliminated and
only PA- or PTFN-based ones remain (since PTFNs are always expressed
in fixed 2KB "page" size).  The page-table management macros are
renamed with a leading underscore and take page-size arguments with
the presumption that clients will use those macros in some single
place to provide the "real" macros they will use themselves.

I happened to notice the old hv_set_caching() API was totally broken
(it assumed 4KB pages) so I changed it so it would nominally work
correctly with other page sizes.

Tag modules with the page size so you can't load a module built with
a conflicting page size.  (And add a test for SMP while we're at it.)
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
上级 47d632f9
......@@ -139,6 +139,31 @@ config NR_CPUS
smaller kernel memory footprint results from using a smaller
value on chips with fewer tiles.
if TILEGX
choice
prompt "Kernel page size"
default PAGE_SIZE_64KB
help
This lets you select the page size of the kernel. For best
performance on memory-intensive applications, a page size of 64KB
is recommended. For workloads involving many small files, many
connections, etc., it may be better to select 16KB, which uses
memory more efficiently at some cost in TLB performance.
Note that this option is TILE-Gx specific; currently
TILEPro page size is set by rebuilding the hypervisor.
config PAGE_SIZE_16KB
bool "16KB"
config PAGE_SIZE_64KB
bool "64KB"
endchoice
endif
source "kernel/time/Kconfig"
source "kernel/Kconfig.hz"
......
......@@ -21,7 +21,6 @@ generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += kdebug.h
generic-y += local.h
generic-y += module.h
generic-y += msgbuf.h
generic-y += mutex.h
generic-y += param.h
......
......@@ -21,7 +21,7 @@ struct mm_context {
* Written under the mmap_sem semaphore; read without the
* semaphore but atomically, but it is conservatively set.
*/
unsigned int priority_cached;
unsigned long priority_cached;
};
typedef struct mm_context mm_context_t;
......
......@@ -30,11 +30,15 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm)
return 0;
}
/* Note that arch/tile/kernel/head.S also calls hv_install_context() */
/*
* Note that arch/tile/kernel/head_NN.S and arch/tile/mm/migrate_NN.S
* also call hv_install_context().
*/
static inline void __install_page_table(pgd_t *pgdir, int asid, pgprot_t prot)
{
/* FIXME: DIRECTIO should not always be set. FIXME. */
int rc = hv_install_context(__pa(pgdir), prot, asid, HV_CTX_DIRECTIO);
int rc = hv_install_context(__pa(pgdir), prot, asid,
HV_CTX_DIRECTIO | CTX_PAGE_FLAG);
if (rc < 0)
panic("hv_install_context failed: %d", rc);
}
......
/*
* Copyright 2011 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*/
#ifndef _ASM_TILE_MODULE_H
#define _ASM_TILE_MODULE_H
#include <arch/chip.h>
#include <asm-generic/module.h>
/* We can't use modules built with different page sizes. */
#if defined(CONFIG_PAGE_SIZE_16KB)
# define MODULE_PGSZ " 16KB"
#elif defined(CONFIG_PAGE_SIZE_64KB)
# define MODULE_PGSZ " 64KB"
#else
# define MODULE_PGSZ ""
#endif
/* We don't really support no-SMP so tag if someone tries. */
#ifdef CONFIG_SMP
#define MODULE_NOSMP ""
#else
#define MODULE_NOSMP " nosmp"
#endif
#define MODULE_ARCH_VERMAGIC CHIP_ARCH_NAME MODULE_PGSZ MODULE_NOSMP
#endif /* _ASM_TILE_MODULE_H */
......@@ -20,8 +20,17 @@
#include <arch/chip.h>
/* PAGE_SHIFT and HPAGE_SHIFT determine the page sizes. */
#define PAGE_SHIFT HV_LOG2_PAGE_SIZE_SMALL
#define HPAGE_SHIFT HV_LOG2_PAGE_SIZE_LARGE
#if defined(CONFIG_PAGE_SIZE_16KB)
#define PAGE_SHIFT 14
#define CTX_PAGE_FLAG HV_CTX_PG_SM_16K
#elif defined(CONFIG_PAGE_SIZE_64KB)
#define PAGE_SHIFT 16
#define CTX_PAGE_FLAG HV_CTX_PG_SM_64K
#else
#define PAGE_SHIFT HV_LOG2_DEFAULT_PAGE_SIZE_SMALL
#define CTX_PAGE_FLAG 0
#endif
#define HPAGE_SHIFT HV_LOG2_DEFAULT_PAGE_SIZE_LARGE
#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define HPAGE_SIZE (_AC(1, UL) << HPAGE_SHIFT)
......
......@@ -19,24 +19,24 @@
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <asm/fixmap.h>
#include <asm/page.h>
#include <hv/hypervisor.h>
/* Bits for the size of the second-level page table. */
#define L2_KERNEL_PGTABLE_SHIFT \
(HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL + HV_LOG2_PTE_SIZE)
#define L2_KERNEL_PGTABLE_SHIFT _HV_LOG2_L2_SIZE(HPAGE_SHIFT, PAGE_SHIFT)
/* How big is a kernel L2 page table? */
#define L2_KERNEL_PGTABLE_SIZE (1UL << L2_KERNEL_PGTABLE_SHIFT)
/* We currently allocate user L2 page tables by page (unlike kernel L2s). */
#if L2_KERNEL_PGTABLE_SHIFT < HV_LOG2_PAGE_SIZE_SMALL
#define L2_USER_PGTABLE_SHIFT HV_LOG2_PAGE_SIZE_SMALL
#if L2_KERNEL_PGTABLE_SHIFT < PAGE_SHIFT
#define L2_USER_PGTABLE_SHIFT PAGE_SHIFT
#else
#define L2_USER_PGTABLE_SHIFT L2_KERNEL_PGTABLE_SHIFT
#endif
/* How many pages do we need, as an "order", for a user L2 page table? */
#define L2_USER_PGTABLE_ORDER (L2_USER_PGTABLE_SHIFT - HV_LOG2_PAGE_SIZE_SMALL)
/* How big is a kernel L2 page table? */
#define L2_KERNEL_PGTABLE_SIZE (1 << L2_KERNEL_PGTABLE_SHIFT)
#define L2_USER_PGTABLE_ORDER (L2_USER_PGTABLE_SHIFT - PAGE_SHIFT)
static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
{
......@@ -50,14 +50,14 @@ static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
static inline void pmd_populate_kernel(struct mm_struct *mm,
pmd_t *pmd, pte_t *ptep)
{
set_pmd(pmd, ptfn_pmd(__pa(ptep) >> HV_LOG2_PAGE_TABLE_ALIGN,
set_pmd(pmd, ptfn_pmd(HV_CPA_TO_PTFN(__pa(ptep)),
__pgprot(_PAGE_PRESENT)));
}
static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
pgtable_t page)
{
set_pmd(pmd, ptfn_pmd(HV_PFN_TO_PTFN(page_to_pfn(page)),
set_pmd(pmd, ptfn_pmd(HV_CPA_TO_PTFN(PFN_PHYS(page_to_pfn(page))),
__pgprot(_PAGE_PRESENT)));
}
......@@ -68,8 +68,20 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
extern pgd_t *pgd_alloc(struct mm_struct *mm);
extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address);
extern void pte_free(struct mm_struct *mm, struct page *pte);
extern pgtable_t pgtable_alloc_one(struct mm_struct *mm, unsigned long address,
int order);
extern void pgtable_free(struct mm_struct *mm, struct page *pte, int order);
static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
unsigned long address)
{
return pgtable_alloc_one(mm, address, L2_USER_PGTABLE_ORDER);
}
static inline void pte_free(struct mm_struct *mm, struct page *pte)
{
pgtable_free(mm, pte, L2_USER_PGTABLE_ORDER);
}
#define pmd_pgtable(pmd) pmd_page(pmd)
......@@ -85,8 +97,13 @@ static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
pte_free(mm, virt_to_page(pte));
}
extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
unsigned long address);
extern void __pgtable_free_tlb(struct mmu_gather *tlb, struct page *pte,
unsigned long address, int order);
static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
unsigned long address)
{
__pgtable_free_tlb(tlb, pte, address, L2_USER_PGTABLE_ORDER);
}
#define check_pgt_cache() do { } while (0)
......@@ -104,19 +121,44 @@ void shatter_pmd(pmd_t *pmd);
void shatter_huge_page(unsigned long addr);
#ifdef __tilegx__
/* We share a single page allocator for both L1 and L2 page tables. */
#if HV_L1_SIZE != HV_L2_SIZE
# error Rework assumption that L1 and L2 page tables are same size.
#endif
#define L1_USER_PGTABLE_ORDER L2_USER_PGTABLE_ORDER
#define pud_populate(mm, pud, pmd) \
pmd_populate_kernel((mm), (pmd_t *)(pud), (pte_t *)(pmd))
#define pmd_alloc_one(mm, addr) \
((pmd_t *)page_to_virt(pte_alloc_one((mm), (addr))))
#define pmd_free(mm, pmdp) \
pte_free((mm), virt_to_page(pmdp))
#define __pmd_free_tlb(tlb, pmdp, address) \
__pte_free_tlb((tlb), virt_to_page(pmdp), (address))
/* Bits for the size of the L1 (intermediate) page table. */
#define L1_KERNEL_PGTABLE_SHIFT _HV_LOG2_L1_SIZE(HPAGE_SHIFT)
/* How big is a kernel L2 page table? */
#define L1_KERNEL_PGTABLE_SIZE (1UL << L1_KERNEL_PGTABLE_SHIFT)
/* We currently allocate L1 page tables by page. */
#if L1_KERNEL_PGTABLE_SHIFT < PAGE_SHIFT
#define L1_USER_PGTABLE_SHIFT PAGE_SHIFT
#else
#define L1_USER_PGTABLE_SHIFT L1_KERNEL_PGTABLE_SHIFT
#endif
/* How many pages do we need, as an "order", for an L1 page table? */
#define L1_USER_PGTABLE_ORDER (L1_USER_PGTABLE_SHIFT - PAGE_SHIFT)
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
{
struct page *p = pgtable_alloc_one(mm, address, L1_USER_PGTABLE_ORDER);
return (pmd_t *)page_to_virt(p);
}
static inline void pmd_free(struct mm_struct *mm, pmd_t *pmdp)
{
pgtable_free(mm, virt_to_page(pmdp), L1_USER_PGTABLE_ORDER);
}
static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
unsigned long address)
{
__pgtable_free_tlb(tlb, virt_to_page(pmdp), address,
L1_USER_PGTABLE_ORDER);
}
#endif /* __tilegx__ */
#endif /* _ASM_TILE_PGALLOC_H */
......@@ -27,8 +27,10 @@
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/pfn.h>
#include <asm/processor.h>
#include <asm/fixmap.h>
#include <asm/page.h>
struct mm_struct;
struct vm_area_struct;
......@@ -162,7 +164,7 @@ extern void set_page_homes(void);
(pgprot_t) { ((oldprot).val & ~_PAGE_ALL) | (newprot).val }
/* Just setting the PFN to zero suffices. */
#define pte_pgprot(x) hv_pte_set_pfn((x), 0)
#define pte_pgprot(x) hv_pte_set_pa((x), 0)
/*
* For PTEs and PDEs, we must clear the Present bit first when
......@@ -262,7 +264,7 @@ static inline int pte_none(pte_t pte)
static inline unsigned long pte_pfn(pte_t pte)
{
return hv_pte_get_pfn(pte);
return PFN_DOWN(hv_pte_get_pa(pte));
}
/* Set or get the remote cache cpu in a pgprot with remote caching. */
......@@ -271,7 +273,7 @@ extern int get_remote_cache_cpu(pgprot_t prot);
static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
{
return hv_pte_set_pfn(prot, pfn);
return hv_pte_set_pa(prot, PFN_PHYS(pfn));
}
/* Support for priority mappings. */
......@@ -471,7 +473,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
* OK for pte_lockptr(), since we just end up with potentially one
* lock being used for several pte_t arrays.
*/
#define pmd_page(pmd) pfn_to_page(HV_PTFN_TO_PFN(pmd_ptfn(pmd)))
#define pmd_page(pmd) pfn_to_page(PFN_DOWN(HV_PTFN_TO_CPA(pmd_ptfn(pmd))))
static inline void pmd_clear(pmd_t *pmdp)
{
......
......@@ -20,11 +20,12 @@
* The level-1 index is defined by the huge page size. A PGD is composed
* of PTRS_PER_PGD pgd_t's and is the top level of the page table.
*/
#define PGDIR_SHIFT HV_LOG2_PAGE_SIZE_LARGE
#define PGDIR_SIZE HV_PAGE_SIZE_LARGE
#define PGDIR_SHIFT HPAGE_SHIFT
#define PGDIR_SIZE HPAGE_SIZE
#define PGDIR_MASK (~(PGDIR_SIZE-1))
#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
#define SIZEOF_PGD (PTRS_PER_PGD * sizeof(pgd_t))
#define PTRS_PER_PGD _HV_L1_ENTRIES(HPAGE_SHIFT)
#define PGD_INDEX(va) _HV_L1_INDEX(va, HPAGE_SHIFT)
#define SIZEOF_PGD _HV_L1_SIZE(HPAGE_SHIFT)
/*
* The level-2 index is defined by the difference between the huge
......@@ -33,8 +34,9 @@
* Note that the hypervisor docs use PTE for what we call pte_t, so
* this nomenclature is somewhat confusing.
*/
#define PTRS_PER_PTE (1 << (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL))
#define SIZEOF_PTE (PTRS_PER_PTE * sizeof(pte_t))
#define PTRS_PER_PTE _HV_L2_ENTRIES(HPAGE_SHIFT, PAGE_SHIFT)
#define PTE_INDEX(va) _HV_L2_INDEX(va, HPAGE_SHIFT, PAGE_SHIFT)
#define SIZEOF_PTE _HV_L2_SIZE(HPAGE_SHIFT, PAGE_SHIFT)
#ifndef __ASSEMBLY__
......
......@@ -21,17 +21,19 @@
#define PGDIR_SIZE HV_L1_SPAN
#define PGDIR_MASK (~(PGDIR_SIZE-1))
#define PTRS_PER_PGD HV_L0_ENTRIES
#define SIZEOF_PGD (PTRS_PER_PGD * sizeof(pgd_t))
#define PGD_INDEX(va) HV_L0_INDEX(va)
#define SIZEOF_PGD HV_L0_SIZE
/*
* The level-1 index is defined by the huge page size. A PMD is composed
* of PTRS_PER_PMD pgd_t's and is the middle level of the page table.
*/
#define PMD_SHIFT HV_LOG2_PAGE_SIZE_LARGE
#define PMD_SIZE HV_PAGE_SIZE_LARGE
#define PMD_SHIFT HPAGE_SHIFT
#define PMD_SIZE HPAGE_SIZE
#define PMD_MASK (~(PMD_SIZE-1))
#define PTRS_PER_PMD (1 << (PGDIR_SHIFT - PMD_SHIFT))
#define SIZEOF_PMD (PTRS_PER_PMD * sizeof(pmd_t))
#define PTRS_PER_PMD _HV_L1_ENTRIES(HPAGE_SHIFT)
#define PMD_INDEX(va) _HV_L1_INDEX(va, HPAGE_SHIFT)
#define SIZEOF_PMD _HV_L1_SIZE(HPAGE_SHIFT)
/*
* The level-2 index is defined by the difference between the huge
......@@ -40,17 +42,19 @@
* Note that the hypervisor docs use PTE for what we call pte_t, so
* this nomenclature is somewhat confusing.
*/
#define PTRS_PER_PTE (1 << (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL))
#define SIZEOF_PTE (PTRS_PER_PTE * sizeof(pte_t))
#define PTRS_PER_PTE _HV_L2_ENTRIES(HPAGE_SHIFT, PAGE_SHIFT)
#define PTE_INDEX(va) _HV_L2_INDEX(va, HPAGE_SHIFT, PAGE_SHIFT)
#define SIZEOF_PTE _HV_L2_SIZE(HPAGE_SHIFT, PAGE_SHIFT)
/*
* Align the vmalloc area to an L2 page table, and leave a guard page
* at the beginning and end. The vmalloc code also puts in an internal
* Align the vmalloc area to an L2 page table. Omit guard pages at
* the beginning and end for simplicity (particularly in the per-cpu
* memory allocation code). The vmalloc code puts in an internal
* guard page between each allocation.
*/
#define _VMALLOC_END HUGE_VMAP_BASE
#define VMALLOC_END (_VMALLOC_END - PAGE_SIZE)
#define VMALLOC_START (_VMALLOC_START + PAGE_SIZE)
#define VMALLOC_END _VMALLOC_END
#define VMALLOC_START _VMALLOC_START
#define HUGE_VMAP_END (HUGE_VMAP_BASE + PGDIR_SIZE)
......@@ -98,7 +102,7 @@ static inline int pud_bad(pud_t pud)
* A pud_t points to a pmd_t array. Since we can have multiple per
* page, we don't have a one-to-one mapping of pud_t's to pages.
*/
#define pud_page(pud) pfn_to_page(HV_PTFN_TO_PFN(pud_ptfn(pud)))
#define pud_page(pud) pfn_to_page(PFN_DOWN(HV_PTFN_TO_CPA(pud_ptfn(pud))))
static inline unsigned long pud_index(unsigned long address)
{
......
......@@ -460,7 +460,7 @@ typedef void* lepp_comp_t;
* linux's "MAX_SKB_FRAGS", and presumably over-estimates by one, for
* our page size of exactly 65536. We add one for a "body" fragment.
*/
#define LEPP_MAX_FRAGS (65536 / HV_PAGE_SIZE_SMALL + 2 + 1)
#define LEPP_MAX_FRAGS (65536 / HV_DEFAULT_PAGE_SIZE_SMALL + 2 + 1)
/** Total number of bytes needed for an lepp_tso_cmd_t. */
#define LEPP_TSO_CMD_SIZE(num_frags, header_size) \
......
......@@ -17,8 +17,8 @@
* The hypervisor's public API.
*/
#ifndef _TILE_HV_H
#define _TILE_HV_H
#ifndef _HV_HV_H
#define _HV_HV_H
#include <arch/chip.h>
......@@ -42,25 +42,29 @@
*/
#define HV_L1_SPAN (__HV_SIZE_ONE << HV_LOG2_L1_SPAN)
/** The log2 of the size of small pages, in bytes. This value should
* be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL).
/** The log2 of the initial size of small pages, in bytes.
* See HV_DEFAULT_PAGE_SIZE_SMALL.
*/
#define HV_LOG2_PAGE_SIZE_SMALL 16
#define HV_LOG2_DEFAULT_PAGE_SIZE_SMALL 16
/** The size of small pages, in bytes. This value should be verified
/** The initial size of small pages, in bytes. This value should be verified
* at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL).
* It may also be modified when installing a new context.
*/
#define HV_PAGE_SIZE_SMALL (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_SMALL)
#define HV_DEFAULT_PAGE_SIZE_SMALL \
(__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_SMALL)
/** The log2 of the size of large pages, in bytes. This value should be
* verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE).
/** The log2 of the initial size of large pages, in bytes.
* See HV_DEFAULT_PAGE_SIZE_LARGE.
*/
#define HV_LOG2_PAGE_SIZE_LARGE 24
#define HV_LOG2_DEFAULT_PAGE_SIZE_LARGE 24
/** The size of large pages, in bytes. This value should be verified
/** The initial size of large pages, in bytes. This value should be verified
* at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE).
* It may also be modified when installing a new context.
*/
#define HV_PAGE_SIZE_LARGE (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_LARGE)
#define HV_DEFAULT_PAGE_SIZE_LARGE \
(__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_LARGE)
/** The log2 of the granularity at which page tables must be aligned;
* in other words, the CPA for a page table must have this many zero
......@@ -401,7 +405,13 @@ typedef enum {
* that the temperature has hit an upper limit and is no longer being
* accurately tracked.
*/
HV_SYSCONF_BOARD_TEMP = 6
HV_SYSCONF_BOARD_TEMP = 6,
/** Legal page size bitmask for hv_install_context().
* For example, if 16KB and 64KB small pages are supported,
* it would return "HV_CTX_PG_SM_16K | HV_CTX_PG_SM_64K".
*/
HV_SYSCONF_VALID_PAGE_SIZES = 7,
} HV_SysconfQuery;
......@@ -654,6 +664,12 @@ void hv_set_rtc(HV_RTCTime time);
* new page table does not need to contain any mapping for the
* hv_install_context address itself.
*
* At most one HV_CTX_PG_SM_* flag may be specified in "flags";
* if multiple flags are specified, HV_EINVAL is returned.
* Specifying none of the flags results in using the default page size.
* All cores participating in a given client must request the same
* page size, or the results are undefined.
*
* @param page_table Root of the page table.
* @param access PTE providing info on how to read the page table. This
* value must be consistent between multiple tiles sharing a page table,
......@@ -672,6 +688,11 @@ int hv_install_context(HV_PhysAddr page_table, HV_PTE access, HV_ASID asid,
#define HV_CTX_DIRECTIO 0x1 /**< Direct I/O requests are accepted from
PL0. */
#define HV_CTX_PG_SM_4K 0x10 /**< Use 4K small pages, if available. */
#define HV_CTX_PG_SM_16K 0x20 /**< Use 16K small pages, if available. */
#define HV_CTX_PG_SM_64K 0x40 /**< Use 64K small pages, if available. */
#define HV_CTX_PG_SM_MASK 0xf0 /**< Mask of all possible small pages. */
#ifndef __ASSEMBLER__
/** Value returned from hv_inquire_context(). */
......@@ -1248,11 +1269,14 @@ HV_Errno hv_set_command_line(HV_VirtAddr buf, int length);
* with the existing priority pages) or "red/black" (if they don't).
* The bitmask provides information on which parts of the cache
* have been used for pinned pages so far on this tile; if (1 << N)
* appears in the bitmask, that indicates that a page has been marked
* "priority" whose PFN equals N, mod 8.
* appears in the bitmask, that indicates that a 4KB region of the
* cache starting at (N * 4KB) is in use by a "priority" page.
* The portion of cache used by a particular page can be computed
* by taking the page's PA, modulo CHIP_L2_CACHE_SIZE(), and setting
* all the "4KB" bits corresponding to the actual page size.
* @param bitmask A bitmap of priority page set values
*/
void hv_set_caching(unsigned int bitmask);
void hv_set_caching(unsigned long bitmask);
/** Zero out a specified number of pages.
......@@ -1884,15 +1908,6 @@ int hv_flush_remote(HV_PhysAddr cache_pa, unsigned long cache_control,
of word */
#define HV_PTE_PTFN_BITS 29 /**< Number of bits in a PTFN */
/** Position of the PFN field within the PTE (subset of the PTFN). */
#define HV_PTE_INDEX_PFN (HV_PTE_INDEX_PTFN + (HV_LOG2_PAGE_SIZE_SMALL - \
HV_LOG2_PAGE_TABLE_ALIGN))
/** Length of the PFN field within the PTE (subset of the PTFN). */
#define HV_PTE_INDEX_PFN_BITS (HV_PTE_INDEX_PTFN_BITS - \
(HV_LOG2_PAGE_SIZE_SMALL - \
HV_LOG2_PAGE_TABLE_ALIGN))
/*
* Legal values for the PTE's mode field
*/
......@@ -2245,40 +2260,11 @@ hv_pte_set_mode(HV_PTE pte, unsigned int val)
*
* This field contains the upper bits of the CPA (client physical
* address) of the target page; the complete CPA is this field with
* HV_LOG2_PAGE_SIZE_SMALL zero bits appended to it.
* HV_LOG2_PAGE_TABLE_ALIGN zero bits appended to it.
*
* For PTEs in a level-1 page table where the Page bit is set, the
* CPA must be aligned modulo the large page size.
*/
static __inline unsigned int
hv_pte_get_pfn(const HV_PTE pte)
{
return pte.val >> HV_PTE_INDEX_PFN;
}
/** Set the page frame number into a PTE. See hv_pte_get_pfn. */
static __inline HV_PTE
hv_pte_set_pfn(HV_PTE pte, unsigned int val)
{
/*
* Note that the use of "PTFN" in the next line is intentional; we
* don't want any garbage lower bits left in that field.
*/
pte.val &= ~(((1ULL << HV_PTE_PTFN_BITS) - 1) << HV_PTE_INDEX_PTFN);
pte.val |= (__hv64) val << HV_PTE_INDEX_PFN;
return pte;
}
/** Get the page table frame number from the PTE.
*
* This field contains the upper bits of the CPA (client physical
* address) of the target page table; the complete CPA is this field with
* with HV_PAGE_TABLE_ALIGN zero bits appended to it.
*
* For PTEs in a level-1 page table when the Page bit is not set, the
* CPA must be aligned modulo the sticter of HV_PAGE_TABLE_ALIGN and
* the level-2 page table size.
* For all PTEs in the lowest-level page table, and for all PTEs with
* the Page bit set in all page tables, the CPA must be aligned modulo
* the relevant page size.
*/
static __inline unsigned long
hv_pte_get_ptfn(const HV_PTE pte)
......@@ -2286,7 +2272,6 @@ hv_pte_get_ptfn(const HV_PTE pte)
return pte.val >> HV_PTE_INDEX_PTFN;
}
/** Set the page table frame number into a PTE. See hv_pte_get_ptfn. */
static __inline HV_PTE
hv_pte_set_ptfn(HV_PTE pte, unsigned long val)
......@@ -2296,6 +2281,20 @@ hv_pte_set_ptfn(HV_PTE pte, unsigned long val)
return pte;
}
/** Get the client physical address from the PTE. See hv_pte_set_ptfn. */
static __inline HV_PhysAddr
hv_pte_get_pa(const HV_PTE pte)
{
return (__hv64) hv_pte_get_ptfn(pte) << HV_LOG2_PAGE_TABLE_ALIGN;
}
/** Set the client physical address into a PTE. See hv_pte_get_ptfn. */
static __inline HV_PTE
hv_pte_set_pa(HV_PTE pte, HV_PhysAddr pa)
{
return hv_pte_set_ptfn(pte, pa >> HV_LOG2_PAGE_TABLE_ALIGN);
}
/** Get the remote tile caching this page.
*
......@@ -2331,28 +2330,20 @@ hv_pte_set_lotar(HV_PTE pte, unsigned int val)
#endif /* !__ASSEMBLER__ */
/** Converts a client physical address to a pfn. */
#define HV_CPA_TO_PFN(p) ((p) >> HV_LOG2_PAGE_SIZE_SMALL)
/** Converts a pfn to a client physical address. */
#define HV_PFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_SIZE_SMALL)
/** Converts a client physical address to a ptfn. */
#define HV_CPA_TO_PTFN(p) ((p) >> HV_LOG2_PAGE_TABLE_ALIGN)
/** Converts a ptfn to a client physical address. */
#define HV_PTFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_TABLE_ALIGN)
/** Converts a ptfn to a pfn. */
#define HV_PTFN_TO_PFN(p) \
((p) >> (HV_LOG2_PAGE_SIZE_SMALL - HV_LOG2_PAGE_TABLE_ALIGN))
/** Converts a pfn to a ptfn. */
#define HV_PFN_TO_PTFN(p) \
((p) << (HV_LOG2_PAGE_SIZE_SMALL - HV_LOG2_PAGE_TABLE_ALIGN))
#if CHIP_VA_WIDTH() > 32
/*
* Note that we currently do not allow customizing the page size
* of the L0 pages, but fix them at 4GB, so we do not use the
* "_HV_xxx" nomenclature for the L0 macros.
*/
/** Log number of HV_PTE entries in L0 page table */
#define HV_LOG2_L0_ENTRIES (CHIP_VA_WIDTH() - HV_LOG2_L1_SPAN)
......@@ -2382,69 +2373,104 @@ hv_pte_set_lotar(HV_PTE pte, unsigned int val)
#endif /* CHIP_VA_WIDTH() > 32 */
/** Log number of HV_PTE entries in L1 page table */
#define HV_LOG2_L1_ENTRIES (HV_LOG2_L1_SPAN - HV_LOG2_PAGE_SIZE_LARGE)
#define _HV_LOG2_L1_ENTRIES(log2_page_size_large) \
(HV_LOG2_L1_SPAN - log2_page_size_large)
/** Number of HV_PTE entries in L1 page table */
#define HV_L1_ENTRIES (1 << HV_LOG2_L1_ENTRIES)
#define _HV_L1_ENTRIES(log2_page_size_large) \
(1 << _HV_LOG2_L1_ENTRIES(log2_page_size_large))
/** Log size of L1 page table in bytes */
#define HV_LOG2_L1_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L1_ENTRIES)
#define _HV_LOG2_L1_SIZE(log2_page_size_large) \
(HV_LOG2_PTE_SIZE + _HV_LOG2_L1_ENTRIES(log2_page_size_large))
/** Size of L1 page table in bytes */
#define HV_L1_SIZE (1 << HV_LOG2_L1_SIZE)
#define _HV_L1_SIZE(log2_page_size_large) \
(1 << _HV_LOG2_L1_SIZE(log2_page_size_large))
/** Log number of HV_PTE entries in level-2 page table */
#define HV_LOG2_L2_ENTRIES (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL)
#define _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small) \
(log2_page_size_large - log2_page_size_small)
/** Number of HV_PTE entries in level-2 page table */
#define HV_L2_ENTRIES (1 << HV_LOG2_L2_ENTRIES)
#define _HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) \
(1 << _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small))
/** Log size of level-2 page table in bytes */
#define HV_LOG2_L2_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L2_ENTRIES)
#define _HV_LOG2_L2_SIZE(log2_page_size_large, log2_page_size_small) \
(HV_LOG2_PTE_SIZE + \
_HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small))
/** Size of level-2 page table in bytes */
#define HV_L2_SIZE (1 << HV_LOG2_L2_SIZE)
#define _HV_L2_SIZE(log2_page_size_large, log2_page_size_small) \
(1 << _HV_LOG2_L2_SIZE(log2_page_size_large, log2_page_size_small))
#ifdef __ASSEMBLER__
#if CHIP_VA_WIDTH() > 32
/** Index in L1 for a specific VA */
#define HV_L1_INDEX(va) \
(((va) >> HV_LOG2_PAGE_SIZE_LARGE) & (HV_L1_ENTRIES - 1))
#define _HV_L1_INDEX(va, log2_page_size_large) \
(((va) >> log2_page_size_large) & (_HV_L1_ENTRIES(log2_page_size_large) - 1))
#else /* CHIP_VA_WIDTH() > 32 */
/** Index in L1 for a specific VA */
#define HV_L1_INDEX(va) \
(((va) >> HV_LOG2_PAGE_SIZE_LARGE))
#define _HV_L1_INDEX(va, log2_page_size_large) \
(((va) >> log2_page_size_large))
#endif /* CHIP_VA_WIDTH() > 32 */
/** Index in level-2 page table for a specific VA */
#define HV_L2_INDEX(va) \
(((va) >> HV_LOG2_PAGE_SIZE_SMALL) & (HV_L2_ENTRIES - 1))
#define _HV_L2_INDEX(va, log2_page_size_large, log2_page_size_small) \
(((va) >> log2_page_size_small) & \
(_HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) - 1))
#else /* __ASSEMBLER __ */
#if CHIP_VA_WIDTH() > 32
/** Index in L1 for a specific VA */
#define HV_L1_INDEX(va) \
(((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_LARGE) & (HV_L1_ENTRIES - 1))
#define _HV_L1_INDEX(va, log2_page_size_large) \
(((HV_VirtAddr)(va) >> log2_page_size_large) & \
(_HV_L1_ENTRIES(log2_page_size_large) - 1))
#else /* CHIP_VA_WIDTH() > 32 */
/** Index in L1 for a specific VA */
#define HV_L1_INDEX(va) \
(((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_LARGE))
#define _HV_L1_INDEX(va, log2_page_size_large) \
(((HV_VirtAddr)(va) >> log2_page_size_large))
#endif /* CHIP_VA_WIDTH() > 32 */
/** Index in level-2 page table for a specific VA */
#define HV_L2_INDEX(va) \
(((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_SMALL) & (HV_L2_ENTRIES - 1))
#define _HV_L2_INDEX(va, log2_page_size_large, log2_page_size_small) \
(((HV_VirtAddr)(va) >> log2_page_size_small) & \
(_HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) - 1))
#endif /* __ASSEMBLER __ */
#endif /* _TILE_HV_H */
/** Position of the PFN field within the PTE (subset of the PTFN). */
#define _HV_PTE_INDEX_PFN(log2_page_size) \
(HV_PTE_INDEX_PTFN + (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN))
/** Length of the PFN field within the PTE (subset of the PTFN). */
#define _HV_PTE_INDEX_PFN_BITS(log2_page_size) \
(HV_PTE_INDEX_PTFN_BITS - (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN))
/** Converts a client physical address to a pfn. */
#define _HV_CPA_TO_PFN(p, log2_page_size) ((p) >> log2_page_size)
/** Converts a pfn to a client physical address. */
#define _HV_PFN_TO_CPA(p, log2_page_size) \
(((HV_PhysAddr)(p)) << log2_page_size)
/** Converts a ptfn to a pfn. */
#define _HV_PTFN_TO_PFN(p, log2_page_size) \
((p) >> (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN))
/** Converts a pfn to a ptfn. */
#define _HV_PFN_TO_PTFN(p, log2_page_size) \
((p) << (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN))
#endif /* _HV_HV_H */
......@@ -69,7 +69,7 @@ ENTRY(_start)
}
{
moveli lr, lo16(1f)
move r5, zero
moveli r5, CTX_PAGE_FLAG
}
{
auli lr, lr, ha16(1f)
......@@ -141,11 +141,11 @@ ENTRY(empty_zero_page)
.macro PTE va, cpa, bits1, no_org=0
.ifeq \no_org
.org swapper_pg_dir + HV_L1_INDEX(\va) * HV_PTE_SIZE
.org swapper_pg_dir + PGD_INDEX(\va) * HV_PTE_SIZE
.endif
.word HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED | \
(HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE)
.word (\bits1) | (HV_CPA_TO_PFN(\cpa) << (HV_PTE_INDEX_PFN - 32))
.word (\bits1) | (HV_CPA_TO_PTFN(\cpa) << (HV_PTE_INDEX_PTFN - 32))
.endm
__PAGE_ALIGNED_DATA
......@@ -166,7 +166,7 @@ ENTRY(swapper_pg_dir)
/* The true text VAs are mapped as VA = PA + MEM_SV_INTRPT */
PTE MEM_SV_INTRPT, 0, (1 << (HV_PTE_INDEX_READABLE - 32)) | \
(1 << (HV_PTE_INDEX_EXECUTABLE - 32))
.org swapper_pg_dir + HV_L1_SIZE
.org swapper_pg_dir + PGDIR_SIZE
END(swapper_pg_dir)
/*
......
......@@ -114,7 +114,7 @@ ENTRY(_start)
shl16insli r0, r0, hw0(swapper_pg_dir - PAGE_OFFSET)
}
{
move r3, zero
moveli r3, CTX_PAGE_FLAG
j hv_install_context
}
1:
......@@ -210,19 +210,19 @@ ENTRY(empty_zero_page)
.macro PTE cpa, bits1
.quad HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED |\
HV_PTE_GLOBAL | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) |\
(\bits1) | (HV_CPA_TO_PFN(\cpa) << HV_PTE_INDEX_PFN)
(\bits1) | (HV_CPA_TO_PTFN(\cpa) << HV_PTE_INDEX_PTFN)
.endm
__PAGE_ALIGNED_DATA
.align PAGE_SIZE
ENTRY(swapper_pg_dir)
.org swapper_pg_dir + HV_L0_INDEX(PAGE_OFFSET) * HV_PTE_SIZE
.org swapper_pg_dir + PGD_INDEX(PAGE_OFFSET) * HV_PTE_SIZE
.Lsv_data_pmd:
.quad 0 /* PTE temp_data_pmd - PAGE_OFFSET, 0 */
.org swapper_pg_dir + HV_L0_INDEX(MEM_SV_START) * HV_PTE_SIZE
.org swapper_pg_dir + PGD_INDEX(MEM_SV_START) * HV_PTE_SIZE
.Lsv_code_pmd:
.quad 0 /* PTE temp_code_pmd - PAGE_OFFSET, 0 */
.org swapper_pg_dir + HV_L0_SIZE
.org swapper_pg_dir + SIZEOF_PGD
END(swapper_pg_dir)
.align HV_PAGE_TABLE_ALIGN
......@@ -233,11 +233,11 @@ ENTRY(temp_data_pmd)
* permissions later.
*/
.set addr, 0
.rept HV_L1_ENTRIES
.rept PTRS_PER_PMD
PTE addr, HV_PTE_READABLE | HV_PTE_WRITABLE
.set addr, addr + HV_PAGE_SIZE_LARGE
.set addr, addr + HPAGE_SIZE
.endr
.org temp_data_pmd + HV_L1_SIZE
.org temp_data_pmd + SIZEOF_PMD
END(temp_data_pmd)
.align HV_PAGE_TABLE_ALIGN
......@@ -248,11 +248,11 @@ ENTRY(temp_code_pmd)
* permissions later.
*/
.set addr, 0
.rept HV_L1_ENTRIES
.rept PTRS_PER_PMD
PTE addr, HV_PTE_READABLE | HV_PTE_EXECUTABLE
.set addr, addr + HV_PAGE_SIZE_LARGE
.set addr, addr + HPAGE_SIZE
.endr
.org temp_code_pmd + HV_L1_SIZE
.org temp_code_pmd + SIZEOF_PMD
END(temp_code_pmd)
/*
......
......@@ -251,6 +251,7 @@ static void setup_quasi_va_is_pa(void)
void machine_kexec(struct kimage *image)
{
void *reboot_code_buffer;
pte_t *ptep;
void (*rnk)(unsigned long, void *, unsigned long)
__noreturn;
......@@ -266,8 +267,10 @@ void machine_kexec(struct kimage *image)
*/
homecache_change_page_home(image->control_code_page, 0,
smp_processor_id());
reboot_code_buffer = vmap(&image->control_code_page, 1, 0,
__pgprot(_PAGE_KERNEL | _PAGE_EXECUTABLE));
reboot_code_buffer = page_address(image->control_code_page);
BUG_ON(reboot_code_buffer == NULL);
ptep = virt_to_pte(NULL, (unsigned long)reboot_code_buffer);
__set_pte(ptep, pte_mkexec(*ptep));
memcpy(reboot_code_buffer, relocate_new_kernel,
relocate_new_kernel_size);
__flush_icache_range(
......
......@@ -1396,13 +1396,13 @@ void __init setup_per_cpu_areas(void)
for (i = 0; i < size; i += PAGE_SIZE, ++pfn, ++pg) {
/* Update the vmalloc mapping and page home. */
pte_t *ptep =
virt_to_pte(NULL, (unsigned long)ptr + i);
unsigned long addr = (unsigned long)ptr + i;
pte_t *ptep = virt_to_pte(NULL, addr);
pte_t pte = *ptep;
BUG_ON(pfn != pte_pfn(pte));
pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_TILE_L3);
pte = set_remote_cache_cpu(pte, cpu);
set_pte(ptep, pte);
set_pte_at(&init_mm, addr, ptep, pte);
/* Update the lowmem mapping for consistency. */
lowmem_va = (unsigned long)pfn_to_kaddr(pfn);
......@@ -1415,7 +1415,7 @@ void __init setup_per_cpu_areas(void)
BUG_ON(pte_huge(*ptep));
}
BUG_ON(pfn != pte_pfn(*ptep));
set_pte(ptep, pte);
set_pte_at(&init_mm, lowmem_va, ptep, pte);
}
}
......
......@@ -203,7 +203,7 @@ void __init ipi_init(void)
if (hv_get_ipi_pte(tile, KERNEL_PL, &pte) != 0)
panic("Failed to initialize IPI for cpu %d\n", cpu);
offset = hv_pte_get_pfn(pte) << PAGE_SHIFT;
offset = PFN_PHYS(pte_pfn(pte));
ipi_mappings[cpu] = ioremap_prot(offset, PAGE_SIZE, pte);
}
#endif
......
......@@ -160,7 +160,7 @@ static unsigned long fast_copy(void *dest, const void *source, int len,
break;
if (get_remote_cache_cpu(src_pte) == smp_processor_id())
break;
src_page = pfn_to_page(hv_pte_get_pfn(src_pte));
src_page = pfn_to_page(pte_pfn(src_pte));
get_page(src_page);
if (pte_val(src_pte) != pte_val(*src_ptep)) {
put_page(src_page);
......@@ -168,7 +168,7 @@ static unsigned long fast_copy(void *dest, const void *source, int len,
}
if (pte_huge(src_pte)) {
/* Adjust the PTE to correspond to a small page */
int pfn = hv_pte_get_pfn(src_pte);
int pfn = pte_pfn(src_pte);
pfn += (((unsigned long)source & (HPAGE_SIZE-1))
>> PAGE_SHIFT);
src_pte = pfn_pte(pfn, src_pte);
......@@ -188,7 +188,7 @@ static unsigned long fast_copy(void *dest, const void *source, int len,
put_page(src_page);
break;
}
dst_page = pfn_to_page(hv_pte_get_pfn(dst_pte));
dst_page = pfn_to_page(pte_pfn(dst_pte));
if (dst_page == src_page) {
/*
* Source and dest are on the same page; this
......@@ -206,7 +206,7 @@ static unsigned long fast_copy(void *dest, const void *source, int len,
}
if (pte_huge(dst_pte)) {
/* Adjust the PTE to correspond to a small page */
int pfn = hv_pte_get_pfn(dst_pte);
int pfn = pte_pfn(dst_pte);
pfn += (((unsigned long)dest & (HPAGE_SIZE-1))
>> PAGE_SHIFT);
dst_pte = pfn_pte(pfn, dst_pte);
......
......@@ -82,7 +82,7 @@ static int num_l2_ptes[MAX_NUMNODES];
static void init_prealloc_ptes(int node, int pages)
{
BUG_ON(pages & (HV_L2_ENTRIES-1));
BUG_ON(pages & (PTRS_PER_PTE - 1));
if (pages) {
num_l2_ptes[node] = pages;
l2_ptes[node] = __alloc_bootmem(pages * sizeof(pte_t),
......@@ -131,14 +131,9 @@ static void __init assign_pte(pmd_t *pmd, pte_t *page_table)
#ifdef __tilegx__
#if HV_L1_SIZE != HV_L2_SIZE
# error Rework assumption that L1 and L2 page tables are same size.
#endif
/* Since pmd_t arrays and pte_t arrays are the same size, just use casts. */
static inline pmd_t *alloc_pmd(void)
{
return (pmd_t *)alloc_pte();
return __alloc_bootmem(L1_KERNEL_PGTABLE_SIZE, HV_PAGE_TABLE_ALIGN, 0);
}
static inline void assign_pmd(pud_t *pud, pmd_t *pmd)
......@@ -811,7 +806,7 @@ void __init paging_init(void)
* changing init_mm once we get up and running, and there's no
* need for e.g. vmalloc_sync_all().
*/
BUILD_BUG_ON(pgd_index(VMALLOC_START) != pgd_index(VMALLOC_END));
BUILD_BUG_ON(pgd_index(VMALLOC_START) != pgd_index(VMALLOC_END - 1));
pud = pud_offset(pgd_base + pgd_index(VMALLOC_START), VMALLOC_START);
assign_pmd(pud, alloc_pmd());
#endif
......
......@@ -289,13 +289,12 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd)
#define L2_USER_PGTABLE_PAGES (1 << L2_USER_PGTABLE_ORDER)
struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
struct page *pgtable_alloc_one(struct mm_struct *mm, unsigned long address,
int order)
{
gfp_t flags = GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO;
struct page *p;
#if L2_USER_PGTABLE_ORDER > 0
int i;
#endif
#ifdef CONFIG_HIGHPTE
flags |= __GFP_HIGHMEM;
......@@ -305,17 +304,15 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
if (p == NULL)
return NULL;
#if L2_USER_PGTABLE_ORDER > 0
/*
* Make every page have a page_count() of one, not just the first.
* We don't use __GFP_COMP since it doesn't look like it works
* correctly with tlb_remove_page().
*/
for (i = 1; i < L2_USER_PGTABLE_PAGES; ++i) {
for (i = 1; i < order; ++i) {
init_page_count(p+i);
inc_zone_page_state(p+i, NR_PAGETABLE);
}
#endif
pgtable_page_ctor(p);
return p;
......@@ -326,28 +323,28 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
* process). We have to correct whatever pte_alloc_one() did before
* returning the pages to the allocator.
*/
void pte_free(struct mm_struct *mm, struct page *p)
void pgtable_free(struct mm_struct *mm, struct page *p, int order)
{
int i;
pgtable_page_dtor(p);
__free_page(p);
for (i = 1; i < L2_USER_PGTABLE_PAGES; ++i) {
for (i = 1; i < order; ++i) {
__free_page(p+i);
dec_zone_page_state(p+i, NR_PAGETABLE);
}
}
void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
unsigned long address)
void __pgtable_free_tlb(struct mmu_gather *tlb, struct page *pte,
unsigned long address, int order)
{
int i;
pgtable_page_dtor(pte);
tlb_remove_page(tlb, pte);
for (i = 1; i < L2_USER_PGTABLE_PAGES; ++i) {
for (i = 1; i < order; ++i) {
tlb_remove_page(tlb, pte + i);
dec_zone_page_state(pte + i, NR_PAGETABLE);
}
......@@ -490,7 +487,7 @@ void set_pte(pte_t *ptep, pte_t pte)
/* Can this mm load a PTE with cached_priority set? */
static inline int mm_is_priority_cached(struct mm_struct *mm)
{
return mm->context.priority_cached;
return mm->context.priority_cached != 0;
}
/*
......@@ -500,8 +497,8 @@ static inline int mm_is_priority_cached(struct mm_struct *mm)
void start_mm_caching(struct mm_struct *mm)
{
if (!mm_is_priority_cached(mm)) {
mm->context.priority_cached = -1U;
hv_set_caching(-1U);
mm->context.priority_cached = -1UL;
hv_set_caching(-1UL);
}
}
......@@ -516,7 +513,7 @@ void start_mm_caching(struct mm_struct *mm)
* Presumably we'll come back later and have more luck and clear
* the value then; for now we'll just keep the cache marked for priority.
*/
static unsigned int update_priority_cached(struct mm_struct *mm)
static unsigned long update_priority_cached(struct mm_struct *mm)
{
if (mm->context.priority_cached && down_write_trylock(&mm->mmap_sem)) {
struct vm_area_struct *vm;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册