Merge tag 'usb-4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some USB and PHY fixes for 4.2-rc6 that resolve some reported
  issues.

  All of these have been in the linux-next tree for a while, full
  details on the patches are in the shortlog below"

* tag 'usb-4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  ARM: dts: dra7: Add syscon-pllreset syscon to SATA PHY
  drivers/usb: Delete XHCI command timer if necessary
  xhci: fix off by one error in TRB DMA address boundary check
  usb: udc: core: add device_del() call to error pathway
  phy: ti-pipe3: i783 workaround for SATA lockup after dpll unlock/relock
  phy-sun4i-usb: Add missing EXPORT_SYMBOL_GPL for sun4i_usb_phy_set_squelch_detect
  USB: sierra: add 1199:68AB device ID
  usb: gadget: f_printer: actually limit the number of instances
  usb: gadget: f_hid: actually limit the number of instances
  usb: gadget: f_uac2: fix calculation of uac2->p_interval
  usb: gadget: bdc: fix a driver crash on disconnect
  usb: chipidea: ehci_init_driver is intended to call one time
  USB: qcserial: Add support for Dell Wireless 5809e 4G Modem
  USB: qcserial/option: make AT URCs work for Sierra Wireless MC7305/MC7355

Documentation/devicetree/bindings/phy/ti-phy.txt

@@ -82,6 +82,9 @@ Optional properties:
  - id: If there are multiple instance of the same type, in order to
    differentiate between each instance "id" can be used (e.g., multi-lane PCIe
    PHY). If "id" is not provided, it is set to default value of '1'.
+ - syscon-pllreset: Handle to system control region that contains the
+   CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
+   register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
 
 This is usually a subnode of ocp2scp to which it is connected.
 
@@ -100,3 +103,16 @@ usb3phy@4a084400 {
 			"sysclk",
 			"refclk";
 };
+
+sata_phy: phy@4A096000 {
+	compatible = "ti,phy-pipe3-sata";
+	reg = <0x4A096000 0x80>, /* phy_rx */
+	      <0x4A096400 0x64>, /* phy_tx */
+	      <0x4A096800 0x40>; /* pll_ctrl */
+	reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+	ctrl-module = <&omap_control_sata>;
+	clocks = <&sys_clkin1>, <&sata_ref_clk>;
+	clock-names = "sysclk", "refclk";
+	syscon-pllreset = <&scm_conf 0x3fc>;
+	#phy-cells = <0>;
+};

arch/arm/boot/dts/dra7.dtsi

@@ -1140,6 +1140,7 @@
 				ctrl-module = <&omap_control_sata>;
 				clocks = <&sys_clkin1>, <&sata_ref_clk>;
 				clock-names = "sysclk", "refclk";
+				syscon-pllreset = <&scm_conf 0x3fc>;
 				#phy-cells = <0>;
 			};
 

drivers/phy/phy-sun4i-usb.c

@@ -212,6 +212,7 @@ void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
 
 	sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2);
 }
+EXPORT_SYMBOL_GPL(sun4i_usb_phy_set_squelch_detect);
 
 static struct phy_ops sun4i_usb_phy_ops = {
 	.init		= sun4i_usb_phy_init,

drivers/phy/phy-ti-pipe3.c

@@ -28,6 +28,8 @@
 #include <linux/delay.h>
 #include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #define	PLL_STATUS		0x00000004
 #define	PLL_GO			0x00000008
@@ -52,6 +54,8 @@
 #define	PLL_LOCK		0x2
 #define	PLL_IDLE		0x1
 
+#define SATA_PLL_SOFT_RESET	BIT(18)
+
 /*
  * This is an Empirical value that works, need to confirm the actual
  * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
@@ -82,6 +86,9 @@ struct ti_pipe3 {
 	struct clk		*refclk;
 	struct clk		*div_clk;
 	struct pipe3_dpll_map	*dpll_map;
+	struct regmap		*dpll_reset_syscon; /* ctrl. reg. acces */
+	unsigned int		dpll_reset_reg; /* reg. index within syscon */
+	bool			sata_refclk_enabled;
 };
 
 static struct pipe3_dpll_map dpll_map_usb[] = {
@@ -249,8 +256,11 @@ static int ti_pipe3_exit(struct phy *x)
 	u32 val;
 	unsigned long timeout;
 
-	/* SATA DPLL can't be powered down due to Errata i783 */
-	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
+	/* If dpll_reset_syscon is not present we wont power down SATA DPLL
+	 * due to Errata i783
+	 */
+	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") &&
+	    !phy->dpll_reset_syscon)
 		return 0;
 
 	/* PCIe doesn't have internal DPLL */
@@ -276,6 +286,14 @@ static int ti_pipe3_exit(struct phy *x)
 		}
 	}
 
+	/* i783: SATA needs control bit toggle after PLL unlock */
+	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) {
+		regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
+				   SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET);
+		regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
+				   SATA_PLL_SOFT_RESET, 0);
+	}
+
 	ti_pipe3_disable_clocks(phy);
 
 	return 0;
@@ -350,6 +368,21 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 		}
 	} else {
 		phy->wkupclk = ERR_PTR(-ENODEV);
+		phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
+							"syscon-pllreset");
+		if (IS_ERR(phy->dpll_reset_syscon)) {
+			dev_info(&pdev->dev,
+				 "can't get syscon-pllreset, sata dpll won't idle\n");
+			phy->dpll_reset_syscon = NULL;
+		} else {
+			if (of_property_read_u32_index(node,
+						       "syscon-pllreset", 1,
+						       &phy->dpll_reset_reg)) {
+				dev_err(&pdev->dev,
+					"couldn't get pllreset reg. offset\n");
+				return -EINVAL;
+			}
+		}
 	}
 
 	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
@@ -402,10 +435,16 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, phy);
 	pm_runtime_enable(phy->dev);
-	/* Prevent auto-disable of refclk for SATA PHY due to Errata i783 */
-	if (of_device_is_compatible(node, "ti,phy-pipe3-sata"))
-		if (!IS_ERR(phy->refclk))
+
+	/*
+	 * Prevent auto-disable of refclk for SATA PHY due to Errata i783
+	 */
+	if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+		if (!IS_ERR(phy->refclk)) {
 			clk_prepare_enable(phy->refclk);
+			phy->sata_refclk_enabled = true;
+		}
+	}
 
 	generic_phy = devm_phy_create(phy->dev, NULL, &ops);
 	if (IS_ERR(generic_phy))
@@ -472,8 +511,18 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
 {
 	if (!IS_ERR(phy->wkupclk))
 		clk_disable_unprepare(phy->wkupclk);
-	if (!IS_ERR(phy->refclk))
+	if (!IS_ERR(phy->refclk)) {
 		clk_disable_unprepare(phy->refclk);
+		/*
+		 * SATA refclk needs an additional disable as we left it
+		 * on in probe to avoid Errata i783
+		 */
+		if (phy->sata_refclk_enabled) {
+			clk_disable_unprepare(phy->refclk);
+			phy->sata_refclk_enabled = false;
+		}
+	}
+
 	if (!IS_ERR(phy->div_clk))
 		clk_disable_unprepare(phy->div_clk);
 }

drivers/usb/chipidea/core.c

@@ -1024,7 +1024,18 @@ static struct platform_driver ci_hdrc_driver = {
 	},
 };
 
-module_platform_driver(ci_hdrc_driver);
+static int __init ci_hdrc_platform_register(void)
+{
+	ci_hdrc_host_driver_init();
+	return platform_driver_register(&ci_hdrc_driver);
+}
+module_init(ci_hdrc_platform_register);
+
+static void __exit ci_hdrc_platform_unregister(void)
+{
+	platform_driver_unregister(&ci_hdrc_driver);
+}
+module_exit(ci_hdrc_platform_unregister);
 
 MODULE_ALIAS("platform:ci_hdrc");
 MODULE_LICENSE("GPL v2");

drivers/usb/chipidea/host.c

@@ -249,9 +249,12 @@ int ci_hdrc_host_init(struct ci_hdrc *ci)
 	rdrv->name	= "host";
 	ci->roles[CI_ROLE_HOST] = rdrv;
 
+	return 0;
+}
+
+void ci_hdrc_host_driver_init(void)
+{
 	ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
 	orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
 	ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
-
-	return 0;
 }

drivers/usb/chipidea/host.h

@@ -5,6 +5,7 @@
 
 int ci_hdrc_host_init(struct ci_hdrc *ci);
 void ci_hdrc_host_destroy(struct ci_hdrc *ci);
+void ci_hdrc_host_driver_init(void);
 
 #else
 
@@ -18,6 +19,11 @@ static inline void ci_hdrc_host_destroy(struct ci_hdrc *ci)
 
 }
 
+static void ci_hdrc_host_driver_init(void)
+{
+
+}
+
 #endif
 
 #endif /* __DRIVERS_USB_CHIPIDEA_HOST_H */

drivers/usb/gadget/function/f_hid.c

@@ -699,6 +699,10 @@ static inline int hidg_get_minor(void)
 	int ret;
 
 	ret = ida_simple_get(&hidg_ida, 0, 0, GFP_KERNEL);
+	if (ret >= HIDG_MINORS) {
+		ida_simple_remove(&hidg_ida, ret);
+		ret = -ENODEV;
+	}
 
 	return ret;
 }

drivers/usb/gadget/function/f_printer.c

@@ -1248,7 +1248,15 @@ static struct config_item_type printer_func_type = {
 
 static inline int gprinter_get_minor(void)
 {
-	return ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
+	int ret;
+
+	ret = ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
+	if (ret >= PRINTER_MINORS) {
+		ida_simple_remove(&printer_ida, ret);
+		ret = -ENODEV;
+	}
+
+	return ret;
 }
 
 static inline void gprinter_put_minor(int minor)

drivers/usb/gadget/function/f_uac2.c

@@ -1162,14 +1162,14 @@ afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt)
 			factor = 1000;
 		} else {
 			ep_desc = &hs_epin_desc;
-			factor = 125;
+			factor = 8000;
 		}
 
 		/* pre-compute some values for iso_complete() */
 		uac2->p_framesize = opts->p_ssize *
 				    num_channels(opts->p_chmask);
 		rate = opts->p_srate * uac2->p_framesize;
-		uac2->p_interval = (1 << (ep_desc->bInterval - 1)) * factor;
+		uac2->p_interval = factor / (1 << (ep_desc->bInterval - 1));
 		uac2->p_pktsize = min_t(unsigned int, rate / uac2->p_interval,
 					prm->max_psize);
 

drivers/usb/gadget/udc/bdc/bdc_ep.c

@@ -779,7 +779,7 @@ static int ep_dequeue(struct bdc_ep *ep, struct bdc_req *req)
 	/* The current hw dequeue pointer */
 	tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS0(0));
 	deq_ptr_64 = tmp_32;
-	tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS0(1));
+	tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS1(0));
 	deq_ptr_64 |= ((u64)tmp_32 << 32);
 
 	/* we have the dma addr of next bd that will be fetched by hardware */

drivers/usb/gadget/udc/udc-core.c

@@ -323,6 +323,7 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
 
 err3:
 	put_device(&udc->dev);
+	device_del(&gadget->dev);
 
 err2:
 	put_device(&gadget->dev);

drivers/usb/host/xhci-mem.c

@@ -1792,7 +1792,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	int size;
 	int i, j, num_ports;
 
-	del_timer_sync(&xhci->cmd_timer);
+	if (timer_pending(&xhci->cmd_timer))
+		del_timer_sync(&xhci->cmd_timer);
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);

drivers/usb/host/xhci-ring.c

@@ -82,7 +82,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
 		return 0;
 	/* offset in TRBs */
 	segment_offset = trb - seg->trbs;
-	if (segment_offset > TRBS_PER_SEGMENT)
+	if (segment_offset >= TRBS_PER_SEGMENT)
 		return 0;
 	return seg->dma + (segment_offset * sizeof(*trb));
 }

drivers/usb/serial/option.c

@@ -1099,6 +1099,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
 	{ USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x68c0, 0xff),
 	  .driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC73xx */
+	{ USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x9041, 0xff),
+	  .driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC7305/MC7355 */
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),

drivers/usb/serial/qcserial.c

@@ -145,7 +145,6 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_SWI(0x1199, 0x901c)},	/* Sierra Wireless EM7700 */
 	{DEVICE_SWI(0x1199, 0x901f)},	/* Sierra Wireless EM7355 */
 	{DEVICE_SWI(0x1199, 0x9040)},	/* Sierra Wireless Modem */
-	{DEVICE_SWI(0x1199, 0x9041)},	/* Sierra Wireless MC7305/MC7355 */
 	{DEVICE_SWI(0x1199, 0x9051)},	/* Netgear AirCard 340U */
 	{DEVICE_SWI(0x1199, 0x9053)},	/* Sierra Wireless Modem */
 	{DEVICE_SWI(0x1199, 0x9054)},	/* Sierra Wireless Modem */
@@ -158,6 +157,7 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_SWI(0x413c, 0x81a4)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a8)},	/* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a9)},	/* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
+	{DEVICE_SWI(0x413c, 0x81b1)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
 
 	/* Huawei devices */
 	{DEVICE_HWI(0x03f0, 0x581d)},	/* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */

drivers/usb/serial/sierra.c

@@ -289,6 +289,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF),
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+	{ USB_DEVICE(0x1199, 0x68AB) }, /* Sierra Wireless AR8550 */
 	/* AT&T Direct IP LTE modems */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist