提交 d5a1c749 编写于 作者: J Jiri Pirko 提交者: David S. Miller

mlxsw: reg: Add Router Algorithmic LPM Unicast Entry Register definition

Serves for adding, updating and removing fib entries.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 6b75c480
......@@ -3622,6 +3622,268 @@ static inline void mlxsw_reg_raltb_pack(char *payload, u16 virtual_router,
mlxsw_reg_raltb_tree_id_set(payload, tree_id);
}
/* RALUE - Router Algorithmic LPM Unicast Entry Register
* -----------------------------------------------------
* RALUE is used to configure and query LPM entries that serve
* the Unicast protocols.
*/
#define MLXSW_REG_RALUE_ID 0x8013
#define MLXSW_REG_RALUE_LEN 0x38
static const struct mlxsw_reg_info mlxsw_reg_ralue = {
.id = MLXSW_REG_RALUE_ID,
.len = MLXSW_REG_RALUE_LEN,
};
/* reg_ralue_protocol
* Protocol.
* Access: Index
*/
MLXSW_ITEM32(reg, ralue, protocol, 0x00, 24, 4);
enum mlxsw_reg_ralue_op {
/* Read operation. If entry doesn't exist, the operation fails. */
MLXSW_REG_RALUE_OP_QUERY_READ = 0,
/* Clear on read operation. Used to read entry and
* clear Activity bit.
*/
MLXSW_REG_RALUE_OP_QUERY_CLEAR = 1,
/* Write operation. Used to write a new entry to the table. All RW
* fields are written for new entry. Activity bit is set
* for new entries.
*/
MLXSW_REG_RALUE_OP_WRITE_WRITE = 0,
/* Update operation. Used to update an existing route entry and
* only update the RW fields that are detailed in the field
* op_u_mask. If entry doesn't exist, the operation fails.
*/
MLXSW_REG_RALUE_OP_WRITE_UPDATE = 1,
/* Clear activity. The Activity bit (the field a) is cleared
* for the entry.
*/
MLXSW_REG_RALUE_OP_WRITE_CLEAR = 2,
/* Delete operation. Used to delete an existing entry. If entry
* doesn't exist, the operation fails.
*/
MLXSW_REG_RALUE_OP_WRITE_DELETE = 3,
};
/* reg_ralue_op
* Operation.
* Access: OP
*/
MLXSW_ITEM32(reg, ralue, op, 0x00, 20, 3);
/* reg_ralue_a
* Activity. Set for new entries. Set if a packet lookup has hit on the
* specific entry, only if the entry is a route. To clear the a bit, use
* "clear activity" op.
* Enabled by activity_dis in RGCR
* Access: RO
*/
MLXSW_ITEM32(reg, ralue, a, 0x00, 16, 1);
/* reg_ralue_virtual_router
* Virtual Router ID
* Range is 0..cap_max_virtual_routers-1
* Access: Index
*/
MLXSW_ITEM32(reg, ralue, virtual_router, 0x04, 16, 16);
#define MLXSW_REG_RALUE_OP_U_MASK_ENTRY_TYPE BIT(0)
#define MLXSW_REG_RALUE_OP_U_MASK_BMP_LEN BIT(1)
#define MLXSW_REG_RALUE_OP_U_MASK_ACTION BIT(2)
/* reg_ralue_op_u_mask
* opcode update mask.
* On read operation, this field is reserved.
* This field is valid for update opcode, otherwise - reserved.
* This field is a bitmask of the fields that should be updated.
* Access: WO
*/
MLXSW_ITEM32(reg, ralue, op_u_mask, 0x04, 8, 3);
/* reg_ralue_prefix_len
* Number of bits in the prefix of the LPM route.
* Note that for IPv6 prefixes, if prefix_len>64 the entry consumes
* two entries in the physical HW table.
* Access: Index
*/
MLXSW_ITEM32(reg, ralue, prefix_len, 0x08, 0, 8);
/* reg_ralue_dip*
* The prefix of the route or of the marker that the object of the LPM
* is compared with. The most significant bits of the dip are the prefix.
* The list significant bits must be '0' if the prefix_len is smaller
* than 128 for IPv6 or smaller than 32 for IPv4.
* IPv4 address uses bits dip[31:0] and bits dip[127:32] are reserved.
* Access: Index
*/
MLXSW_ITEM32(reg, ralue, dip4, 0x18, 0, 32);
enum mlxsw_reg_ralue_entry_type {
MLXSW_REG_RALUE_ENTRY_TYPE_MARKER_ENTRY = 1,
MLXSW_REG_RALUE_ENTRY_TYPE_ROUTE_ENTRY = 2,
MLXSW_REG_RALUE_ENTRY_TYPE_MARKER_AND_ROUTE_ENTRY = 3,
};
/* reg_ralue_entry_type
* Entry type.
* Note - for Marker entries, the action_type and action fields are reserved.
* Access: RW
*/
MLXSW_ITEM32(reg, ralue, entry_type, 0x1C, 30, 2);
/* reg_ralue_bmp_len
* The best match prefix length in the case that there is no match for
* longer prefixes.
* If (entry_type != MARKER_ENTRY), bmp_len must be equal to prefix_len
* Note for any update operation with entry_type modification this
* field must be set.
* Access: RW
*/
MLXSW_ITEM32(reg, ralue, bmp_len, 0x1C, 16, 8);
enum mlxsw_reg_ralue_action_type {
MLXSW_REG_RALUE_ACTION_TYPE_REMOTE,
MLXSW_REG_RALUE_ACTION_TYPE_LOCAL,
MLXSW_REG_RALUE_ACTION_TYPE_IP2ME,
};
/* reg_ralue_action_type
* Action Type
* Indicates how the IP address is connected.
* It can be connected to a local subnet through local_erif or can be
* on a remote subnet connected through a next-hop router,
* or transmitted to the CPU.
* Reserved when entry_type = MARKER_ENTRY
* Access: RW
*/
MLXSW_ITEM32(reg, ralue, action_type, 0x1C, 0, 2);
enum mlxsw_reg_ralue_trap_action {
MLXSW_REG_RALUE_TRAP_ACTION_NOP,
MLXSW_REG_RALUE_TRAP_ACTION_TRAP,
MLXSW_REG_RALUE_TRAP_ACTION_MIRROR_TO_CPU,
MLXSW_REG_RALUE_TRAP_ACTION_MIRROR,
MLXSW_REG_RALUE_TRAP_ACTION_DISCARD_ERROR,
};
/* reg_ralue_trap_action
* Trap action.
* For IP2ME action, only NOP and MIRROR are possible.
* Access: RW
*/
MLXSW_ITEM32(reg, ralue, trap_action, 0x20, 28, 4);
/* reg_ralue_trap_id
* Trap ID to be reported to CPU.
* Trap ID is RTR_INGRESS0 or RTR_INGRESS1.
* For trap_action of NOP, MIRROR and DISCARD_ERROR, trap_id is reserved.
* Access: RW
*/
MLXSW_ITEM32(reg, ralue, trap_id, 0x20, 0, 9);
/* reg_ralue_adjacency_index
* Points to the first entry of the group-based ECMP.
* Only relevant in case of REMOTE action.
* Access: RW
*/
MLXSW_ITEM32(reg, ralue, adjacency_index, 0x24, 0, 24);
/* reg_ralue_ecmp_size
* Amount of sequential entries starting
* from the adjacency_index (the number of ECMPs).
* The valid range is 1-64, 512, 1024, 2048 and 4096.
* Reserved when trap_action is TRAP or DISCARD_ERROR.
* Only relevant in case of REMOTE action.
* Access: RW
*/
MLXSW_ITEM32(reg, ralue, ecmp_size, 0x28, 0, 13);
/* reg_ralue_local_erif
* Egress Router Interface.
* Only relevant in case of LOCAL action.
* Access: RW
*/
MLXSW_ITEM32(reg, ralue, local_erif, 0x24, 0, 16);
/* reg_ralue_v
* Valid bit for the tunnel_ptr field.
* If valid = 0 then trap to CPU as IP2ME trap ID.
* If valid = 1 and the packet format allows NVE or IPinIP tunnel
* decapsulation then tunnel decapsulation is done.
* If valid = 1 and packet format does not allow NVE or IPinIP tunnel
* decapsulation then trap as IP2ME trap ID.
* Only relevant in case of IP2ME action.
* Access: RW
*/
MLXSW_ITEM32(reg, ralue, v, 0x24, 31, 1);
/* reg_ralue_tunnel_ptr
* Tunnel Pointer for NVE or IPinIP tunnel decapsulation.
* For Spectrum, pointer to KVD Linear.
* Only relevant in case of IP2ME action.
* Access: RW
*/
MLXSW_ITEM32(reg, ralue, tunnel_ptr, 0x24, 0, 24);
static inline void mlxsw_reg_ralue_pack(char *payload,
enum mlxsw_reg_ralxx_protocol protocol,
enum mlxsw_reg_ralue_op op,
u16 virtual_router, u8 prefix_len)
{
MLXSW_REG_ZERO(ralue, payload);
mlxsw_reg_ralue_protocol_set(payload, protocol);
mlxsw_reg_ralue_virtual_router_set(payload, virtual_router);
mlxsw_reg_ralue_prefix_len_set(payload, prefix_len);
mlxsw_reg_ralue_entry_type_set(payload,
MLXSW_REG_RALUE_ENTRY_TYPE_ROUTE_ENTRY);
mlxsw_reg_ralue_bmp_len_set(payload, prefix_len);
}
static inline void mlxsw_reg_ralue_pack4(char *payload,
enum mlxsw_reg_ralxx_protocol protocol,
enum mlxsw_reg_ralue_op op,
u16 virtual_router, u8 prefix_len,
u32 dip)
{
mlxsw_reg_ralue_pack(payload, protocol, op, virtual_router, prefix_len);
mlxsw_reg_ralue_dip4_set(payload, dip);
}
static inline void
mlxsw_reg_ralue_act_remote_pack(char *payload,
enum mlxsw_reg_ralue_trap_action trap_action,
u16 trap_id, u32 adjacency_index, u16 ecmp_size)
{
mlxsw_reg_ralue_action_type_set(payload,
MLXSW_REG_RALUE_ACTION_TYPE_REMOTE);
mlxsw_reg_ralue_trap_action_set(payload, trap_action);
mlxsw_reg_ralue_trap_id_set(payload, trap_id);
mlxsw_reg_ralue_adjacency_index_set(payload, adjacency_index);
mlxsw_reg_ralue_ecmp_size_set(payload, ecmp_size);
}
static inline void
mlxsw_reg_ralue_act_local_pack(char *payload,
enum mlxsw_reg_ralue_trap_action trap_action,
u16 trap_id, u16 local_erif)
{
mlxsw_reg_ralue_action_type_set(payload,
MLXSW_REG_RALUE_ACTION_TYPE_LOCAL);
mlxsw_reg_ralue_trap_action_set(payload, trap_action);
mlxsw_reg_ralue_trap_id_set(payload, trap_id);
mlxsw_reg_ralue_local_erif_set(payload, local_erif);
}
static inline void
mlxsw_reg_ralue_act_ip2me_pack(char *payload)
{
mlxsw_reg_ralue_action_type_set(payload,
MLXSW_REG_RALUE_ACTION_TYPE_IP2ME);
}
/* MFCR - Management Fan Control Register
* --------------------------------------
* This register controls the settings of the Fan Speed PWM mechanism.
......@@ -4370,6 +4632,8 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id)
return "RALST";
case MLXSW_REG_RALTB_ID:
return "RALTB";
case MLXSW_REG_RALUE_ID:
return "RALUE";
case MLXSW_REG_MFCR_ID:
return "MFCR";
case MLXSW_REG_MFSC_ID:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册