net:stmmac: Remove bus_id from mdio platform data.

This patch removes bus_id from mdio platform data, The reason to remove
bus_id is, stmmac mdio bus_id is always same as stmmac bus-id, so there
is no point in passing this in different variable.
Also stmmac ethernet driver connects to phy with bus_id passed its
platform data.
So, having single bus-id is much simpler.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Documentation/networking/stmmac.txt

@@ -173,7 +173,6 @@ Where:
 For MDIO bus The we have:
 
  struct stmmac_mdio_bus_data {
-	int bus_id;
 	int (*phy_reset)(void *priv);
 	unsigned int phy_mask;
 	int *irqs;
@@ -181,7 +180,6 @@ For MDIO bus The we have:
  };
 
 Where:
- o bus_id: bus identifier;
  o phy_reset: hook to reset the phy device attached to the bus.
  o phy_mask: phy mask passed when register the MDIO bus within the driver.
  o irqs: list of IRQs, one per PHY.
@@ -230,9 +228,6 @@ there are two MAC cores: one MAC is for MDIO Bus/PHY emulation
 with fixed_link support.
 
 static struct stmmac_mdio_bus_data stmmac1_mdio_bus = {
-	.bus_id = 1,
-		|
-		|-> phy device on the bus_id 1
 	.phy_reset = phy_reset;
 		|
 		|-> function to provide the phy_reset on this board

drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c

@@ -177,7 +177,7 @@ int stmmac_mdio_register(struct net_device *ndev)
 	new_bus->write = &stmmac_mdio_write;
 	new_bus->reset = &stmmac_mdio_reset;
 	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%x",
-		new_bus->name, mdio_bus_data->bus_id);
+		new_bus->name, priv->plat->bus_id);
 	new_bus->priv = ndev;
 	new_bus->irq = irqlist;
 	new_bus->phy_mask = mdio_bus_data->phy_mask;
@@ -213,12 +213,10 @@ int stmmac_mdio_register(struct net_device *ndev)
 			 * and no PHY number was provided to the MAC,
 			 * use the one probed here.
 			 */
-			if ((priv->plat->bus_id == mdio_bus_data->bus_id) &&
-			    (priv->plat->phy_addr == -1))
+			if (priv->plat->phy_addr == -1)
 				priv->plat->phy_addr = addr;
 
-			act = (priv->plat->bus_id == mdio_bus_data->bus_id) &&
-				(priv->plat->phy_addr == addr);
+			act = (priv->plat->phy_addr == addr);
 			switch (phydev->irq) {
 			case PHY_POLL:
 				irq_str = "POLL";

drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c

@@ -40,7 +40,6 @@ static void stmmac_default_data(void)
 	plat_dat.has_gmac = 1;
 	plat_dat.force_sf_dma_mode = 1;
 
-	mdio_data.bus_id = 1;
 	mdio_data.phy_reset = NULL;
 	mdio_data.phy_mask = 0;
 	plat_dat.mdio_bus_data = &mdio_data;

include/linux/stmmac.h

@@ -76,7 +76,6 @@
 /* Platfrom data for platform device structure's platform_data field */
 
 struct stmmac_mdio_bus_data {
-	int bus_id;
 	int (*phy_reset)(void *priv);
 	unsigned int phy_mask;
 	int *irqs;