提交 d5610e51 编写于 作者: P Paul Gortmaker 提交者: Linus Walleij

gpio: mb86s7x: make explicitly non-modular

The Kconfig for this driver is currently:

config GPIO_MB86S7X
        bool "GPIO support for Fujitsu MB86S7x Platforms"

...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity, so that when reading the
driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 8f3e19fa
master alk-4.19.24 alk-4.19.30 alk-4.19.34 alk-4.19.36 alk-4.19.43 alk-4.19.48 alk-4.19.57 ck-4.19.67 ck-4.19.81 ck-4.19.91 github/fork/deepanshu1422/fix-typo-in-comment github/fork/haosdent/fix-typo linux-next v4.19.91 v4.19.90 v4.19.89 v4.19.88 v4.19.87 v4.19.86 v4.19.85 v4.19.84 v4.19.83 v4.19.82 v4.19.81 v4.19.80 v4.19.79 v4.19.78 v4.19.77 v4.19.76 v4.19.75 v4.19.74 v4.19.73 v4.19.72 v4.19.71 v4.19.70 v4.19.69 v4.19.68 v4.19.67 v4.19.66 v4.19.65 v4.19.64 v4.19.63 v4.19.62 v4.19.61 v4.19.60 v4.19.59 v4.19.58 v4.19.57 v4.19.56 v4.19.55 v4.19.54 v4.19.53 v4.19.52 v4.19.51 v4.19.50 v4.19.49 v4.19.48 v4.19.47 v4.19.46 v4.19.45 v4.19.44 v4.19.43 v4.19.42 v4.19.41 v4.19.40 v4.19.39 v4.19.38 v4.19.37 v4.19.36 v4.19.35 v4.19.34 v4.19.33 v4.19.32 v4.19.31 v4.19.30 v4.19.29 v4.19.28 v4.19.27 v4.19.26 v4.19.25 v4.19.24 v4.19.23 v4.19.22 v4.19.21 v4.19.20 v4.19.19 v4.19.18 v4.19.17 v4.19.16 v4.19.15 v4.19.14 v4.19.13 v4.19.12 v4.19.11 v4.19.10 v4.19.9 v4.19.8 v4.19.7 v4.19.6 v4.19.5 v4.19.4 v4.19.3 v4.19.2 v4.19.1 v4.19 v4.19-rc8 v4.19-rc7 v4.19-rc6 v4.19-rc5 v4.19-rc4 v4.19-rc3 v4.19-rc2 v4.19-rc1 ck-release-21 ck-release-20 ck-release-19.2 ck-release-19.1 ck-release-19 ck-release-18 ck-release-17.2 ck-release-17.1 ck-release-17 ck-release-16 ck-release-15.1 ck-release-15 ck-release-14 ck-release-13.2 ck-release-13 ck-release-12 ck-release-11 ck-release-10 ck-release-9 ck-release-7 alk-release-15 alk-release-14 alk-release-13.2 alk-release-13 alk-release-12 alk-release-11 alk-release-10 alk-release-9 alk-release-7
无相关合并请求
...@@ -17,7 +17,6 @@ ...@@ -17,7 +17,6 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/module.h>
#include <linux/err.h> #include <linux/err.h>
#include <linux/errno.h> #include <linux/errno.h>
#include <linux/ioport.h> #include <linux/ioport.h>
...@@ -208,7 +207,6 @@ static const struct of_device_id mb86s70_gpio_dt_ids[] = { ...@@ -208,7 +207,6 @@ static const struct of_device_id mb86s70_gpio_dt_ids[] = {
{ .compatible = "fujitsu,mb86s70-gpio" }, { .compatible = "fujitsu,mb86s70-gpio" },
{ /* sentinel */ } { /* sentinel */ }
}; };
MODULE_DEVICE_TABLE(of, mb86s70_gpio_dt_ids);
static struct platform_driver mb86s70_gpio_driver = { static struct platform_driver mb86s70_gpio_driver = {
.driver = { .driver = {
...@@ -223,8 +221,4 @@ static int __init mb86s70_gpio_init(void) ...@@ -223,8 +221,4 @@ static int __init mb86s70_gpio_init(void)
{ {
return platform_driver_register(&mb86s70_gpio_driver); return platform_driver_register(&mb86s70_gpio_driver);
} }
module_init(mb86s70_gpio_init); device_initcall(mb86s70_gpio_init);
MODULE_DESCRIPTION("MB86S7x GPIO Driver");
MODULE_ALIAS("platform:mb86s70-gpio");
MODULE_LICENSE("GPL");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册
反馈
建议
客服 返回
顶部