Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin serial driver: fix up tty core set_ldisc API change breakage bug
  Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFIN
  Blackfin arch: fixup warnings with the new cplb saved values
  Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver.

arch/blackfin/kernel/traps.c

@@ -67,7 +67,7 @@ void __init trap_init(void)
 	CSYNC();
 }
 
-void *saved_icplb_fault_addr, *saved_dcplb_fault_addr;
+unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
 
 int kstack_depth_to_print = 48;
 
@@ -366,7 +366,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		info.si_code = ILL_CPLB_MULHIT;
 		sig = SIGSEGV;
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
-		if (saved_dcplb_fault_addr < (void *)FIXED_CODE_START)
+		if (saved_dcplb_fault_addr < FIXED_CODE_START)
 			printk(KERN_NOTICE "NULL pointer access\n");
 		else
 #endif
@@ -421,7 +421,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		info.si_code = ILL_CPLB_MULHIT;
 		sig = SIGSEGV;
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
-		if (saved_icplb_fault_addr < (void *)FIXED_CODE_START)
+		if (saved_icplb_fault_addr < FIXED_CODE_START)
 			printk(KERN_NOTICE "Jump to NULL address\n");
 		else
 #endif
@@ -939,8 +939,6 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
 
 	oops_in_progress = 1;
 
-	printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr);
-	printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr);
 	dump_bfin_process(fp);
 	dump_bfin_mem(fp);
 	show_regs(fp);

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -451,9 +451,6 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -676,6 +673,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
@@ -1018,10 +1016,7 @@ static int __init stamp_init(void)
 #endif
 
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

arch/blackfin/mach-bf533/boards/ezkit.c

@@ -87,9 +87,6 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
@@ -189,6 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -425,9 +423,7 @@ static int __init ezkit_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

arch/blackfin/mach-bf533/boards/stamp.c

@@ -161,9 +161,6 @@ static struct platform_device stamp_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
@@ -320,6 +317,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -626,10 +624,8 @@ static int __init stamp_init(void)
 	SSYNC();
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
 #endif

arch/blackfin/mach-bf537/boards/stamp.c

@@ -400,9 +400,6 @@ static struct platform_device stamp_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -629,6 +626,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
@@ -939,10 +937,7 @@ static int __init stamp_init(void)
 #endif
 
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -412,8 +412,6 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 /* SPI flash chip (m25p16) */
@@ -481,7 +479,7 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
-static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 	{
@@ -527,6 +525,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -800,10 +799,7 @@ static int __init ezkit_init(void)
 
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bf54x_spi_board_info,
-			ARRAY_SIZE(bf54x_spi_board_info));
-#endif
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 	return 0;
 }

arch/blackfin/mach-bf561/boards/ezkit.c

@@ -280,7 +280,6 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif
 
-#ifdef CONFIG_SPI_BFIN
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
@@ -295,8 +294,8 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 	.bits_per_word = 8,
 };
 #endif
-#endif
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -327,6 +326,7 @@ static struct platform_device bfin_spi0_device = {
 		.platform_data = &bfin_spi0_info, /* Passed to driver */
 	},
 };
+#endif
 
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
@@ -537,10 +537,7 @@ static int __init ezkit_init(void)
 	SSYNC();
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

drivers/serial/bfin_5xx.c

@@ -530,11 +530,7 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
 	if (uart->cts_pin < 0)
 		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
 
-# ifdef BF54x
-	if (UART_GET_MSR(uart) & CTS)
-# else
-	if (gpio_get_value(uart->cts_pin))
-# endif
+	if (UART_GET_CTS(uart))
 		return TIOCM_DSR | TIOCM_CAR;
 	else
 #endif
@@ -549,17 +545,9 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
 		return;
 
 	if (mctrl & TIOCM_RTS)
-# ifdef BF54x
-		UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
-# else
-		gpio_set_value(uart->rts_pin, 0);
-# endif
+		UART_CLEAR_RTS(uart);
 	else
-# ifdef BF54x
-		UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
-# else
-		gpio_set_value(uart->rts_pin, 1);
-# endif
+		UART_SET_RTS(uart);
 #endif
 }
 
@@ -752,11 +740,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/* Disable UART */
 	ier = UART_GET_IER(uart);
-#ifdef CONFIG_BF54x
-	UART_CLEAR_IER(uart, 0xF);
-#else
-	UART_PUT_IER(uart, 0);
-#endif
+	UART_DISABLE_INTS(uart);
 
 	/* Set DLAB in LCR to Access DLL and DLH */
 	UART_SET_DLAB(uart);
@@ -771,11 +755,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	UART_PUT_LCR(uart, lcr);
 
 	/* Enable UART */
-#ifdef CONFIG_BF54x
-	UART_SET_IER(uart, ier);
-#else
-	UART_PUT_IER(uart, ier);
-#endif
+	UART_ENABLE_INTS(uart, ier);
 
 	val = UART_GET_GCTL(uart);
 	val |= UCEN;
@@ -833,15 +813,15 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
  * Enable the IrDA function if tty->ldisc.num is N_IRDA.
  * In other cases, disable IrDA function.
  */
-static void bfin_set_ldisc(struct tty_struct *tty)
+static void bfin_serial_set_ldisc(struct uart_port *port)
 {
-	int line = tty->index;
+	int line = port->line;
 	unsigned short val;
 
-	if (line >= tty->driver->num)
+	if (line >= port->info->tty->driver->num)
 		return;
 
-	switch (tty->ldisc.num) {
+	switch (port->info->tty->ldisc.num) {
 	case N_IRDA:
 		val = UART_GET_GCTL(&bfin_serial_ports[line]);
 		val |= (IREN | RPOLC);
@@ -866,6 +846,7 @@ static struct uart_ops bfin_serial_pops = {
 	.startup	= bfin_serial_startup,
 	.shutdown	= bfin_serial_shutdown,
 	.set_termios	= bfin_serial_set_termios,
+	.set_ldisc	= bfin_serial_set_ldisc,
 	.type		= bfin_serial_type,
 	.release_port	= bfin_serial_release_port,
 	.request_port	= bfin_serial_request_port,
@@ -1206,7 +1187,6 @@ static int __init bfin_serial_init(void)
 
 	ret = uart_register_driver(&bfin_serial_reg);
 	if (ret == 0) {
-		bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
 		ret = platform_driver_register(&bfin_serial_driver);
 		if (ret) {
 			pr_debug("uart register failed\n");

include/asm-blackfin/mach-bf527/bfin_serial_5xx.h

@@ -53,6 +53,12 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 

include/asm-blackfin/mach-bf533/bfin_serial_5xx.h

@@ -53,6 +53,12 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
 #ifdef CONFIG_BFIN_UART0_CTSRTS
 # define CONFIG_SERIAL_BFIN_CTSRTS
 # ifndef CONFIG_UART0_CTS_PIN

include/asm-blackfin/mach-bf537/bfin_serial_5xx.h

@@ -53,6 +53,12 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 

include/asm-blackfin/mach-bf548/bfin_serial_5xx.h

@@ -57,6 +57,12 @@
 #define UART_SET_DLAB(uart)     /* MMRs not muxed on BF54x */
 #define UART_CLEAR_DLAB(uart)   /* MMRs not muxed on BF54x */
 
+#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS)
+#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS))
+#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS))
+#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
+
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 

include/asm-blackfin/mach-bf561/bfin_serial_5xx.h

@@ -53,6 +53,12 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
 #ifdef CONFIG_BFIN_UART0_CTSRTS
 # define CONFIG_SERIAL_BFIN_CTSRTS
 # ifndef CONFIG_UART0_CTS_PIN