Merge branch 'rmobile-fixes-for-linus' of...

Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: mach-shmobile: clock-sh7372: remove bogus pllc2 clock toggling.
  ARM: mach-shmobile: clock-sh7372: remove unnecessary fsi clocks
  ARM: mach-shmobile: clock-sh7372: modify error code
  ARM: mach-shmobile: ap4evb: FSI clock use proper process for ak4642
  ARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMI
  ARM: mach-shmobile: clock-sh7372: remove fsidiv bogus disable
  ARM: mach-shmobile: sh7372 USB0/IIC1 MSTP fix

arch/arm/mach-shmobile/board-ap4evb.c

@@ -567,38 +567,127 @@ static struct platform_device *qhd_devices[] __initdata = {
 
 /* FSI */
 #define IRQ_FSI		evt2irq(0x1840)
+static int __fsi_set_rate(struct clk *clk, long rate, int enable)
+{
+	int ret = 0;
+
+	if (rate <= 0)
+		return ret;
+
+	if (enable) {
+		ret = clk_set_rate(clk, rate);
+		if (0 == ret)
+			ret = clk_enable(clk);
+	} else {
+		clk_disable(clk);
+	}
+
+	return ret;
+}
+
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+	return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
+}
 
-static int fsi_set_rate(int is_porta, int rate)
+static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
+{
+	struct clk *fsia_ick;
+	struct clk *fsiack;
+	int ret = -EIO;
+
+	fsia_ick = clk_get(dev, "icka");
+	if (IS_ERR(fsia_ick))
+		return PTR_ERR(fsia_ick);
+
+	/*
+	 * FSIACK is connected to AK4642,
+	 * and use external clock pin from it.
+	 * it is parent of fsia_ick now.
+	 */
+	fsiack = clk_get_parent(fsia_ick);
+	if (!fsiack)
+		goto fsia_ick_out;
+
+	/*
+	 * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
+	 *
+	 ** FIXME **
+	 * Because the freq_table of external clk (fsiack) are all 0,
+	 * the return value of clk_round_rate became 0.
+	 * So, it use __fsi_set_rate here.
+	 */
+	ret = __fsi_set_rate(fsiack, rate, enable);
+	if (ret < 0)
+		goto fsiack_out;
+
+	ret = __fsi_set_round_rate(fsia_ick, rate, enable);
+	if ((ret < 0) && enable)
+		__fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
+
+fsiack_out:
+	clk_put(fsiack);
+
+fsia_ick_out:
+	clk_put(fsia_ick);
+
+	return 0;
+}
+
+static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
 {
 	struct clk *fsib_clk;
 	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	long fsib_rate = 0;
+	long fdiv_rate = 0;
+	int ackmd_bpfmd;
 	int ret;
 
-	/* set_rate is not needed if port A */
-	if (is_porta)
-		return 0;
-
-	fsib_clk = clk_get(NULL, "fsib_clk");
-	if (IS_ERR(fsib_clk))
-		return -EINVAL;
-
 	switch (rate) {
 	case 44100:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		fsib_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	case 48000:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
-		clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		fsib_rate	= 85428000; /* around 48kHz x 256 x 7 */
+		fdiv_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	default:
 		pr_err("unsupported rate in FSI2 port B\n");
-		ret = -EINVAL;
-		break;
+		return -EINVAL;
 	}
 
+	/* FSI B setting */
+	fsib_clk = clk_get(dev, "ickb");
+	if (IS_ERR(fsib_clk))
+		return -EIO;
+
+	ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
 	clk_put(fsib_clk);
+	if (ret < 0)
+		return ret;
+
+	/* FSI DIV setting */
+	ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+	if (ret < 0) {
+		/* disable FSI B */
+		if (enable)
+			__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+		return ret;
+	}
+
+	return ackmd_bpfmd;
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+	int ret;
+
+	if (is_porta)
+		ret = fsi_ak4642_set_rate(dev, rate, enable);
+	else
+		ret = fsi_hdmi_set_rate(dev, rate, enable);
 
 	return ret;
 }
@@ -880,6 +969,11 @@ static int __init hdmi_init_pm_clock(void)
 		goto out;
 	}
 
+	ret = clk_enable(&sh7372_pllc2_clk);
+	if (ret < 0) {
+		pr_err("Cannot enable pllc2 clock\n");
+		goto out;
+	}
 	pr_debug("PLLC2 set frequency %lu\n", rate);
 
 	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
@@ -896,23 +990,11 @@ static int __init hdmi_init_pm_clock(void)
 
 device_initcall(hdmi_init_pm_clock);
 
-#define FSIACK_DUMMY_RATE 48000
 static int __init fsi_init_pm_clock(void)
 {
 	struct clk *fsia_ick;
 	int ret;
 
-	/*
-	 * FSIACK is connected to AK4642,
-	 * and the rate is depend on playing sound rate.
-	 * So, set dummy rate (= 48k) here
-	 */
-	ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
-	if (ret < 0) {
-		pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
-		return ret;
-	}
-
 	fsia_ick = clk_get(&fsi_device.dev, "icka");
 	if (IS_ERR(fsia_ick)) {
 		ret = PTR_ERR(fsia_ick);
@@ -921,16 +1003,9 @@ static int __init fsi_init_pm_clock(void)
 	}
 
 	ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
-	if (ret < 0) {
-		pr_err("Cannot set FSI-A parent: %d\n", ret);
-		goto out;
-	}
-
-	ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
 	if (ret < 0)
-		pr_err("Cannot set FSI-A rate: %d\n", ret);
+		pr_err("Cannot set FSI-A parent: %d\n", ret);
 
-out:
 	clk_put(fsia_ick);
 
 	return ret;

arch/arm/mach-shmobile/clock-sh7372.c

@@ -229,21 +229,13 @@ static int pllc2_set_rate(struct clk *clk, unsigned long rate)
 	if (idx < 0)
 		return idx;
 
-	if (rate == clk->parent->rate) {
-		pllc2_disable(clk);
-		return 0;
-	}
+	if (rate == clk->parent->rate)
+		return -EINVAL;
 
 	value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
 
-	if (value & 0x80000000)
-		pllc2_disable(clk);
-
 	__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
 
-	if (value & 0x80000000)
-		return pllc2_enable(clk);
-
 	return 0;
 }
 
@@ -452,10 +444,8 @@ static int fsidiv_enable(struct clk *clk)
 	unsigned long value;
 
 	value  = __raw_readl(clk->mapping->base) >> 16;
-	if (value < 2) {
-		fsidiv_disable(clk);
-		return -ENOENT;
-	}
+	if (value < 2)
+		return -EIO;
 
 	__raw_writel((value << 16) | 0x3, clk->mapping->base);
 
@@ -466,17 +456,12 @@ static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
 {
 	int idx;
 
-	if (clk->parent->rate == rate) {
-		fsidiv_disable(clk);
-		return 0;
-	}
-
 	idx = (clk->parent->rate / rate) & 0xffff;
 	if (idx < 2)
-		return -ENOENT;
+		return -EINVAL;
 
 	__raw_writel(idx << 16, clk->mapping->base);
-	return fsidiv_enable(clk);
+	return 0;
 }
 
 static struct clk_ops fsidiv_clk_ops = {
@@ -607,8 +592,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
 	CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
 	CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
-	CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
-	CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
 	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
 	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
 	CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
@@ -645,8 +628,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
-	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
-	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */

include/sound/sh_fsi.h

@@ -85,7 +85,9 @@
  *     ACK_MD (FSI2)
  *     CKG1   (FSI)
  *
- * err:  return value < 0
+ * err		: return value <  0
+ * no change	: return value == 0
+ * change xMD	: return value >  0
  *
  * 0x-00000AB
  *
@@ -111,7 +113,7 @@
 struct sh_fsi_platform_info {
 	unsigned long porta_flags;
 	unsigned long portb_flags;
-	int (*set_rate)(int is_porta, int rate); /* for master mode */
+	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 };
 
 #endif /* __SOUND_FSI_H */

sound/soc/sh/fsi.c

@@ -132,6 +132,8 @@ struct fsi_priv {
 	struct fsi_stream playback;
 	struct fsi_stream capture;
 
+	long rate;
+
 	u32 mst_ctrl;
 };
 
@@ -854,10 +856,17 @@ static void fsi_dai_shutdown(struct snd_pcm_substream *substream,
 {
 	struct fsi_priv *fsi = fsi_get_priv(substream);
 	int is_play = fsi_is_play(substream);
+	struct fsi_master *master = fsi_get_master(fsi);
+	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 
 	fsi_irq_disable(fsi, is_play);
 	fsi_clk_ctrl(fsi, 0);
 
+	set_rate = master->info->set_rate;
+	if (set_rate && fsi->rate)
+		set_rate(dai->dev, fsi_is_port_a(fsi), fsi->rate, 0);
+	fsi->rate = 0;
+
 	pm_runtime_put_sync(dai->dev);
 }
 
@@ -891,20 +900,20 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
 {
 	struct fsi_priv *fsi = fsi_get_priv(substream);
 	struct fsi_master *master = fsi_get_master(fsi);
-	int (*set_rate)(int is_porta, int rate) = master->info->set_rate;
+	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 	int fsi_ver = master->core->ver;
-	int is_play = fsi_is_play(substream);
+	long rate = params_rate(params);
 	int ret;
 
-	/* if slave mode, set_rate is not needed */
-	if (!fsi_is_master_mode(fsi, is_play))
+	set_rate = master->info->set_rate;
+	if (!set_rate)
 		return 0;
 
-	/* it is error if no set_rate */
-	if (!set_rate)
-		return -EIO;
+	ret = set_rate(dai->dev, fsi_is_port_a(fsi), rate, 1);
+	if (ret < 0) /* error */
+		return ret;
 
-	ret = set_rate(fsi_is_port_a(fsi), params_rate(params));
+	fsi->rate = rate;
 	if (ret > 0) {
 		u32 data = 0;