提交 d41789b2 编写于 作者: S Shawn Guo 提交者: Mark Brown

ASoC: mx27vis: retrieve gpio numbers from platform_data

Rather than including mach/iomux-mx27.h to define gpio numbers and set
up the pins, the patch moves all these into machine code and has the
gpio numbers passed to driver via platform_data.  As the result, we
can remove the mach/iomux-mx27.h inclusion from driver.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NJavier Martin <javier.martin@vista-silicon.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 7f22fd9c
......@@ -33,6 +33,7 @@
#include <linux/dma-mapping.h>
#include <linux/leds.h>
#include <linux/memblock.h>
#include <linux/platform_data/asoc-mx27vis.h>
#include <media/soc_camera.h>
#include <sound/tlv320aic32x4.h>
#include <asm/mach-types.h>
......@@ -58,6 +59,11 @@
#define EXPBOARD_BIT1 (GPIO_PORTD + 27)
#define EXPBOARD_BIT0 (GPIO_PORTD + 28)
#define AMP_GAIN_0 (GPIO_PORTF + 9)
#define AMP_GAIN_1 (GPIO_PORTF + 8)
#define AMP_MUTE_SDL (GPIO_PORTE + 5)
#define AMP_MUTE_SDR (GPIO_PORTF + 7)
static const int visstrim_m10_pins[] __initconst = {
/* UART1 (console) */
PE12_PF_UART1_TXD,
......@@ -139,6 +145,11 @@ static const int visstrim_m10_pins[] __initconst = {
EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
/* Audio AMP control */
AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT,
AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT,
AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT,
AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT,
};
static struct gpio visstrim_m10_version_gpios[] = {
......@@ -166,6 +177,26 @@ static const struct gpio visstrim_m10_gpios[] __initconst = {
.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
.label = "usbotg_cs",
},
{
.gpio = AMP_GAIN_0,
.flags = GPIOF_DIR_OUT,
.label = "amp-gain-0",
},
{
.gpio = AMP_GAIN_1,
.flags = GPIOF_DIR_OUT,
.label = "amp-gain-1",
},
{
.gpio = AMP_MUTE_SDL,
.flags = GPIOF_DIR_OUT,
.label = "amp-mute-sdl",
},
{
.gpio = AMP_MUTE_SDR,
.flags = GPIOF_DIR_OUT,
.label = "amp-mute-sdr",
},
};
/* Camera */
......@@ -405,6 +436,14 @@ static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
.flags = IMX_SSI_DMA | IMX_SSI_SYN,
};
/* Audio */
static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = {
.amp_gain0_gpio = AMP_GAIN_0,
.amp_gain1_gpio = AMP_GAIN_1,
.amp_mutel_gpio = AMP_MUTE_SDL,
.amp_muter_gpio = AMP_MUTE_SDR,
};
static void __init visstrim_m10_revision(void)
{
int exp_version = 0;
......@@ -463,7 +502,8 @@ static void __init visstrim_m10_board_init(void)
imx27_add_fec(NULL);
imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0);
imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
sizeof(snd_mx27vis_pdata));
platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
&iclink_tvp5150, sizeof(iclink_tvp5150));
gpio_led_register_device(0, &visstrim_m10_led_data);
......
#ifndef __PLATFORM_DATA_ASOC_MX27VIS_H
#define __PLATFORM_DATA_ASOC_MX27VIS_H
struct snd_mx27vis_platform_data {
int amp_gain0_gpio;
int amp_gain1_gpio;
int amp_mutel_gpio;
int amp_muter_gpio;
};
#endif /* __PLATFORM_DATA_ASOC_MX27VIS_H */
......@@ -26,13 +26,13 @@
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/platform_data/asoc-mx27vis.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/tlv.h>
#include <asm/mach-types.h>
#include <mach/iomux-mx27.h>
#include "../codecs/tlv320aic32x4.h"
#include "imx-ssi.h"
......@@ -41,20 +41,12 @@
#define MX27VIS_AMP_GAIN 0
#define MX27VIS_AMP_MUTE 1
#define MX27VIS_PIN_G0 (GPIO_PORTF + 9)
#define MX27VIS_PIN_G1 (GPIO_PORTF + 8)
#define MX27VIS_PIN_SDL (GPIO_PORTE + 5)
#define MX27VIS_PIN_SDR (GPIO_PORTF + 7)
static int mx27vis_amp_gain;
static int mx27vis_amp_mute;
static const int mx27vis_amp_pins[] = {
MX27VIS_PIN_G0 | GPIO_GPIO | GPIO_OUT,
MX27VIS_PIN_G1 | GPIO_GPIO | GPIO_OUT,
MX27VIS_PIN_SDL | GPIO_GPIO | GPIO_OUT,
MX27VIS_PIN_SDR | GPIO_GPIO | GPIO_OUT,
};
static int mx27vis_amp_gain0_gpio;
static int mx27vis_amp_gain1_gpio;
static int mx27vis_amp_mutel_gpio;
static int mx27vis_amp_muter_gpio;
static int mx27vis_aic32x4_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
......@@ -109,13 +101,13 @@ static int mx27vis_amp_set(struct snd_kcontrol *kcontrol,
switch (reg) {
case MX27VIS_AMP_GAIN:
gpio_set_value(MX27VIS_PIN_G0, value & 1);
gpio_set_value(MX27VIS_PIN_G1, value >> 1);
gpio_set_value(mx27vis_amp_gain0_gpio, value & 1);
gpio_set_value(mx27vis_amp_gain1_gpio, value >> 1);
mx27vis_amp_gain = value;
break;
case MX27VIS_AMP_MUTE:
gpio_set_value(MX27VIS_PIN_SDL, value & 1);
gpio_set_value(MX27VIS_PIN_SDR, value >> 1);
gpio_set_value(mx27vis_amp_mutel_gpio, value & 1);
gpio_set_value(mx27vis_amp_muter_gpio, value >> 1);
mx27vis_amp_mute = value;
break;
}
......@@ -190,8 +182,19 @@ static struct snd_soc_card mx27vis_aic32x4 = {
static int __devinit mx27vis_aic32x4_probe(struct platform_device *pdev)
{
struct snd_mx27vis_platform_data *pdata = pdev->dev.platform_data;
int ret;
if (!pdata) {
dev_err(&pdev->dev, "No platform data supplied\n");
return -EINVAL;
}
mx27vis_amp_gain0_gpio = pdata->amp_gain0_gpio;
mx27vis_amp_gain1_gpio = pdata->amp_gain1_gpio;
mx27vis_amp_mutel_gpio = pdata->amp_mutel_gpio;
mx27vis_amp_muter_gpio = pdata->amp_muter_gpio;
mx27vis_aic32x4.dev = &pdev->dev;
ret = snd_soc_register_card(&mx27vis_aic32x4);
if (ret) {
......@@ -213,11 +216,6 @@ static int __devinit mx27vis_aic32x4_probe(struct platform_device *pdev)
IMX_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
);
ret = mxc_gpio_setup_multiple_pins(mx27vis_amp_pins,
ARRAY_SIZE(mx27vis_amp_pins), "MX27VIS_AMP");
if (ret)
printk(KERN_ERR "ASoC: unable to setup gpios\n");
return ret;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册