提交 d40d9187 编写于 作者: D Daniel Vetter

Merge branch 'topic/drm-vblank-rework' into drm-intel-next-queued

Pull in the drm vblank rework from Ville and me. drm core parts acked
by Dave Airlie

Conflicts:
	drivers/gpu/drm/i915/intel_display.c

Just a bit of fun around the placement of drm_vblank_on. This merge
resolution has been tested in drm-intel-nightly for a while already.
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
......@@ -1895,8 +1895,8 @@ void intel_crt_init(struct drm_device *dev)
<para>
The function filters out modes larger than
<parameter>max_width</parameter> and <parameter>max_height</parameter>
if specified. It then calls the connector
<methodname>mode_valid</methodname> helper operation for each mode in
if specified. It then calls the optional connector
<methodname>mode_valid</methodname> helper operation for each mode in
the probed list to check whether the mode is valid for the connector.
</para>
</listitem>
......@@ -2257,7 +2257,7 @@ void intel_crt_init(struct drm_device *dev)
<para>
Verify whether a mode is valid for the connector. Return MODE_OK for
supported modes and one of the enum drm_mode_status values (MODE_*)
for unsupported modes. This operation is mandatory.
for unsupported modes. This operation is optional.
</para>
<para>
As the mode rejection reason is currently not used beside for
......@@ -2519,6 +2519,10 @@ void (*disable_vblank) (struct drm_device *dev, int crtc);</synopsis>
with a call to <function>drm_vblank_cleanup</function> in the driver
<methodname>unload</methodname> operation handler.
</para>
<sect2>
<title>Vertical Blanking and Interrupt Handling Functions Reference</title>
!Edrivers/gpu/drm/drm_irq.c
</sect2>
</sect1>
<!-- Internals: open/close, file operations and ioctls -->
......@@ -2861,17 +2865,16 @@ int num_ioctls;</synopsis>
<term>DRM_IOCTL_MODESET_CTL</term>
<listitem>
<para>
This should be called by application level drivers before and
after mode setting, since on many devices the vertical blank
counter is reset at that time. Internally, the DRM snapshots
the last vblank count when the ioctl is called with the
_DRM_PRE_MODESET command, so that the counter won't go backwards
(which is dealt with when _DRM_POST_MODESET is used).
This was only used for user-mode-settind drivers around
modesetting changes to allow the kernel to update the vblank
interrupt after mode setting, since on many devices the vertical
blank counter is reset to 0 at some point during modeset. Modern
drivers should not call this any more since with kernel mode
setting it is a no-op.
</para>
</listitem>
</varlistentry>
</variablelist>
<!--!Edrivers/char/drm/drm_irq.c-->
</para>
</sect1>
......
......@@ -4,6 +4,6 @@
ccflags-y := -Iinclude/drm
ast-y := ast_drv.o ast_main.o ast_mode.o ast_fb.o ast_ttm.o ast_post.o
ast-y := ast_drv.o ast_main.o ast_mode.o ast_fb.o ast_ttm.o ast_post.o ast_dp501.o
obj-$(CONFIG_DRM_AST) := ast.o
\ No newline at end of file
obj-$(CONFIG_DRM_AST) := ast.o
#include <linux/firmware.h>
#include <drm/drmP.h>
#include "ast_drv.h"
MODULE_FIRMWARE("ast_dp501_fw.bin");
int ast_load_dp501_microcode(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
static char *fw_name = "ast_dp501_fw.bin";
int err;
err = request_firmware(&ast->dp501_fw, fw_name, dev->dev);
if (err)
return err;
return 0;
}
static void send_ack(struct ast_private *ast)
{
u8 sendack;
sendack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0xff);
sendack |= 0x80;
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0x00, sendack);
}
static void send_nack(struct ast_private *ast)
{
u8 sendack;
sendack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0xff);
sendack &= ~0x80;
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0x00, sendack);
}
static bool wait_ack(struct ast_private *ast)
{
u8 waitack;
u32 retry = 0;
do {
waitack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd2, 0xff);
waitack &= 0x80;
udelay(100);
} while ((!waitack) && (retry++ < 1000));
if (retry < 1000)
return true;
else
return false;
}
static bool wait_nack(struct ast_private *ast)
{
u8 waitack;
u32 retry = 0;
do {
waitack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd2, 0xff);
waitack &= 0x80;
udelay(100);
} while ((waitack) && (retry++ < 1000));
if (retry < 1000)
return true;
else
return false;
}
static void set_cmd_trigger(struct ast_private *ast)
{
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, ~0x40, 0x40);
}
static void clear_cmd_trigger(struct ast_private *ast)
{
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, ~0x40, 0x00);
}
#if 0
static bool wait_fw_ready(struct ast_private *ast)
{
u8 waitready;
u32 retry = 0;
do {
waitready = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd2, 0xff);
waitready &= 0x40;
udelay(100);
} while ((!waitready) && (retry++ < 1000));
if (retry < 1000)
return true;
else
return false;
}
#endif
static bool ast_write_cmd(struct drm_device *dev, u8 data)
{
struct ast_private *ast = dev->dev_private;
int retry = 0;
if (wait_nack(ast)) {
send_nack(ast);
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9a, 0x00, data);
send_ack(ast);
set_cmd_trigger(ast);
do {
if (wait_ack(ast)) {
clear_cmd_trigger(ast);
send_nack(ast);
return true;
}
} while (retry++ < 100);
}
clear_cmd_trigger(ast);
send_nack(ast);
return false;
}
static bool ast_write_data(struct drm_device *dev, u8 data)
{
struct ast_private *ast = dev->dev_private;
if (wait_nack(ast)) {
send_nack(ast);
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9a, 0x00, data);
send_ack(ast);
if (wait_ack(ast)) {
send_nack(ast);
return true;
}
}
send_nack(ast);
return false;
}
#if 0
static bool ast_read_data(struct drm_device *dev, u8 *data)
{
struct ast_private *ast = dev->dev_private;
u8 tmp;
*data = 0;
if (wait_ack(ast) == false)
return false;
tmp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd3, 0xff);
*data = tmp;
if (wait_nack(ast) == false) {
send_nack(ast);
return false;
}
send_nack(ast);
return true;
}
static void clear_cmd(struct ast_private *ast)
{
send_nack(ast);
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9a, 0x00, 0x00);
}
#endif
void ast_set_dp501_video_output(struct drm_device *dev, u8 mode)
{
ast_write_cmd(dev, 0x40);
ast_write_data(dev, mode);
msleep(10);
}
static u32 get_fw_base(struct ast_private *ast)
{
return ast_mindwm(ast, 0x1e6e2104) & 0x7fffffff;
}
bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size)
{
struct ast_private *ast = dev->dev_private;
u32 i, data;
u32 boot_address;
data = ast_mindwm(ast, 0x1e6e2100) & 0x01;
if (data) {
boot_address = get_fw_base(ast);
for (i = 0; i < size; i += 4)
*(u32 *)(addr + i) = ast_mindwm(ast, boot_address + i);
return true;
}
return false;
}
bool ast_launch_m68k(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
u32 i, data, len = 0;
u32 boot_address;
u8 *fw_addr = NULL;
u8 jreg;
data = ast_mindwm(ast, 0x1e6e2100) & 0x01;
if (!data) {
if (ast->dp501_fw_addr) {
fw_addr = ast->dp501_fw_addr;
len = 32*1024;
} else if (ast->dp501_fw) {
fw_addr = (u8 *)ast->dp501_fw->data;
len = ast->dp501_fw->size;
}
/* Get BootAddress */
ast_moutdwm(ast, 0x1e6e2000, 0x1688a8a8);
data = ast_mindwm(ast, 0x1e6e0004);
switch (data & 0x03) {
case 0:
boot_address = 0x44000000;
break;
default:
case 1:
boot_address = 0x48000000;
break;
case 2:
boot_address = 0x50000000;
break;
case 3:
boot_address = 0x60000000;
break;
}
boot_address -= 0x200000; /* -2MB */
/* copy image to buffer */
for (i = 0; i < len; i += 4) {
data = *(u32 *)(fw_addr + i);
ast_moutdwm(ast, boot_address + i, data);
}
/* Init SCU */
ast_moutdwm(ast, 0x1e6e2000, 0x1688a8a8);
/* Launch FW */
ast_moutdwm(ast, 0x1e6e2104, 0x80000000 + boot_address);
ast_moutdwm(ast, 0x1e6e2100, 1);
/* Update Scratch */
data = ast_mindwm(ast, 0x1e6e2040) & 0xfffff1ff; /* D[11:9] = 100b: UEFI handling */
data |= 0x800;
ast_moutdwm(ast, 0x1e6e2040, data);
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x99, 0xfc); /* D[1:0]: Reserved Video Buffer */
jreg |= 0x02;
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x99, jreg);
}
return true;
}
u8 ast_get_dp501_max_clk(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
u32 boot_address, offset, data;
u8 linkcap[4], linkrate, linklanes, maxclk = 0xff;
boot_address = get_fw_base(ast);
/* validate FW version */
offset = 0xf000;
data = ast_mindwm(ast, boot_address + offset);
if ((data & 0xf0) != 0x10) /* version: 1x */
return maxclk;
/* Read Link Capability */
offset = 0xf014;
*(u32 *)linkcap = ast_mindwm(ast, boot_address + offset);
if (linkcap[2] == 0) {
linkrate = linkcap[0];
linklanes = linkcap[1];
data = (linkrate == 0x0a) ? (90 * linklanes) : (54 * linklanes);
if (data > 0xff)
data = 0xff;
maxclk = (u8)data;
}
return maxclk;
}
bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata)
{
struct ast_private *ast = dev->dev_private;
u32 i, boot_address, offset, data;
boot_address = get_fw_base(ast);
/* validate FW version */
offset = 0xf000;
data = ast_mindwm(ast, boot_address + offset);
if ((data & 0xf0) != 0x10)
return false;
/* validate PnP Monitor */
offset = 0xf010;
data = ast_mindwm(ast, boot_address + offset);
if (!(data & 0x01))
return false;
/* Read EDID */
offset = 0xf020;
for (i = 0; i < 128; i += 4) {
data = ast_mindwm(ast, boot_address + offset + i);
*(u32 *)(ediddata + i) = data;
}
return true;
}
static bool ast_init_dvo(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
u8 jreg;
u32 data;
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
ast_write32(ast, 0x12000, 0x1688a8a8);
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
if (!(jreg & 0x80)) {
/* Init SCU DVO Settings */
data = ast_read32(ast, 0x12008);
/* delay phase */
data &= 0xfffff8ff;
data |= 0x00000500;
ast_write32(ast, 0x12008, data);
if (ast->chip == AST2300) {
data = ast_read32(ast, 0x12084);
/* multi-pins for DVO single-edge */
data |= 0xfffe0000;
ast_write32(ast, 0x12084, data);
data = ast_read32(ast, 0x12088);
/* multi-pins for DVO single-edge */
data |= 0x000fffff;
ast_write32(ast, 0x12088, data);
data = ast_read32(ast, 0x12090);
/* multi-pins for DVO single-edge */
data &= 0xffffffcf;
data |= 0x00000020;
ast_write32(ast, 0x12090, data);
} else { /* AST2400 */
data = ast_read32(ast, 0x12088);
/* multi-pins for DVO single-edge */
data |= 0x30000000;
ast_write32(ast, 0x12088, data);
data = ast_read32(ast, 0x1208c);
/* multi-pins for DVO single-edge */
data |= 0x000000cf;
ast_write32(ast, 0x1208c, data);
data = ast_read32(ast, 0x120a4);
/* multi-pins for DVO single-edge */
data |= 0xffff0000;
ast_write32(ast, 0x120a4, data);
data = ast_read32(ast, 0x120a8);
/* multi-pins for DVO single-edge */
data |= 0x0000000f;
ast_write32(ast, 0x120a8, data);
data = ast_read32(ast, 0x12094);
/* multi-pins for DVO single-edge */
data |= 0x00000002;
ast_write32(ast, 0x12094, data);
}
}
/* Force to DVO */
data = ast_read32(ast, 0x1202c);
data &= 0xfffbffff;
ast_write32(ast, 0x1202c, data);
/* Init VGA DVO Settings */
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x80);
return true;
}
void ast_init_3rdtx(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
u8 jreg;
u32 data;
if (ast->chip == AST2300 || ast->chip == AST2400) {
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
switch (jreg & 0x0e) {
case 0x04:
ast_init_dvo(dev);
break;
case 0x08:
ast_launch_m68k(dev);
break;
case 0x0c:
ast_init_dvo(dev);
break;
default:
if (ast->tx_chip_type == AST_TX_SIL164)
ast_init_dvo(dev);
else {
ast_write32(ast, 0x12000, 0x1688a8a8);
data = ast_read32(ast, 0x1202c);
data &= 0xfffcffff;
ast_write32(ast, 0, data);
}
}
}
}
......@@ -61,9 +61,17 @@ enum ast_chip {
AST2200,
AST2150,
AST2300,
AST2400,
AST1180,
};
enum ast_tx_chip {
AST_TX_NONE,
AST_TX_SIL164,
AST_TX_ITE66121,
AST_TX_DP501,
};
#define AST_DRAM_512Mx16 0
#define AST_DRAM_1Gx16 1
#define AST_DRAM_512Mx32 2
......@@ -102,6 +110,12 @@ struct ast_private {
* we have. */
struct ttm_bo_kmap_obj cache_kmap;
int next_cursor;
bool support_wide_screen;
enum ast_tx_chip tx_chip_type;
u8 dp501_maxclk;
u8 *dp501_fw_addr;
const struct firmware *dp501_fw; /* dp501 fw */
};
int ast_driver_load(struct drm_device *dev, unsigned long flags);
......@@ -368,4 +382,14 @@ int ast_mmap(struct file *filp, struct vm_area_struct *vma);
/* ast post */
void ast_post_gpu(struct drm_device *dev);
u32 ast_mindwm(struct ast_private *ast, u32 r);
void ast_moutdwm(struct ast_private *ast, u32 r, u32 v);
/* ast dp501 */
int ast_load_dp501_microcode(struct drm_device *dev);
void ast_set_dp501_video_output(struct drm_device *dev, u8 mode);
bool ast_launch_m68k(struct drm_device *dev);
bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size);
bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata);
u8 ast_get_dp501_max_clk(struct drm_device *dev);
void ast_init_3rdtx(struct drm_device *dev);
#endif
......@@ -66,12 +66,16 @@ uint8_t ast_get_index_reg_mask(struct ast_private *ast,
static int ast_detect_chip(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
uint32_t data, jreg;
if (dev->pdev->device == PCI_CHIP_AST1180) {
ast->chip = AST1100;
DRM_INFO("AST 1180 detected\n");
} else {
if (dev->pdev->revision >= 0x20) {
if (dev->pdev->revision >= 0x30) {
ast->chip = AST2400;
DRM_INFO("AST 2400 detected\n");
} else if (dev->pdev->revision >= 0x20) {
ast->chip = AST2300;
DRM_INFO("AST 2300 detected\n");
} else if (dev->pdev->revision >= 0x10) {
......@@ -104,6 +108,59 @@ static int ast_detect_chip(struct drm_device *dev)
DRM_INFO("AST 2000 detected\n");
}
}
switch (ast->chip) {
case AST1180:
ast->support_wide_screen = true;
break;
case AST2000:
ast->support_wide_screen = false;
break;
default:
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff);
if (!(jreg & 0x80))
ast->support_wide_screen = true;
else if (jreg & 0x01)
ast->support_wide_screen = true;
else {
ast->support_wide_screen = false;
ast_write32(ast, 0xf004, 0x1e6e0000);
ast_write32(ast, 0xf000, 0x1);
data = ast_read32(ast, 0x1207c);
data &= 0x300;
if (ast->chip == AST2300 && data == 0x0) /* ast1300 */
ast->support_wide_screen = true;
if (ast->chip == AST2400 && data == 0x100) /* ast1400 */
ast->support_wide_screen = true;
}
break;
}
ast->tx_chip_type = AST_TX_NONE;
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xff);
if (jreg & 0x80)
ast->tx_chip_type = AST_TX_SIL164;
if ((ast->chip == AST2300) || (ast->chip == AST2400)) {
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
switch (jreg) {
case 0x04:
ast->tx_chip_type = AST_TX_SIL164;
break;
case 0x08:
ast->dp501_fw_addr = kzalloc(32*1024, GFP_KERNEL);
if (ast->dp501_fw_addr) {
/* backup firmware */
if (ast_backup_fw(dev, ast->dp501_fw_addr, 32*1024)) {
kfree(ast->dp501_fw_addr);
ast->dp501_fw_addr = NULL;
}
}
/* fallthrough */
case 0x0c:
ast->tx_chip_type = AST_TX_DP501;
}
}
return 0;
}
......@@ -129,7 +186,7 @@ static int ast_get_dram_info(struct drm_device *dev)
else
ast->dram_bus_width = 32;
if (ast->chip == AST2300) {
if (ast->chip == AST2300 || ast->chip == AST2400) {
switch (data & 0x03) {
case 0:
ast->dram_type = AST_DRAM_512Mx16;
......@@ -257,17 +314,32 @@ static u32 ast_get_vram_info(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
u8 jreg;
u32 vram_size;
ast_open_key(ast);
vram_size = AST_VIDMEM_DEFAULT_SIZE;
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xaa, 0xff);
switch (jreg & 3) {
case 0: return AST_VIDMEM_SIZE_8M;
case 1: return AST_VIDMEM_SIZE_16M;
case 2: return AST_VIDMEM_SIZE_32M;
case 3: return AST_VIDMEM_SIZE_64M;
case 0: vram_size = AST_VIDMEM_SIZE_8M; break;
case 1: vram_size = AST_VIDMEM_SIZE_16M; break;
case 2: vram_size = AST_VIDMEM_SIZE_32M; break;
case 3: vram_size = AST_VIDMEM_SIZE_64M; break;
}
return AST_VIDMEM_DEFAULT_SIZE;
jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x99, 0xff);
switch (jreg & 0x03) {
case 1:
vram_size -= 0x100000;
break;
case 2:
vram_size -= 0x200000;
break;
case 3:
vram_size -= 0x400000;
break;
}
return vram_size;
}
int ast_driver_load(struct drm_device *dev, unsigned long flags)
......@@ -316,6 +388,7 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
if (ast->chip == AST2100 ||
ast->chip == AST2200 ||
ast->chip == AST2300 ||
ast->chip == AST2400 ||
ast->chip == AST1180) {
dev->mode_config.max_width = 1920;
dev->mode_config.max_height = 2048;
......@@ -343,6 +416,7 @@ int ast_driver_unload(struct drm_device *dev)
{
struct ast_private *ast = dev->dev_private;
kfree(ast->dp501_fw_addr);
ast_mode_fini(dev);
ast_fbdev_fini(dev);
drm_mode_config_cleanup(dev);
......
......@@ -115,11 +115,17 @@ static bool ast_get_vbios_mode_info(struct drm_crtc *crtc, struct drm_display_mo
else
vbios_mode->enh_table = &res_1280x1024[refresh_rate_index];
break;
case 1360:
vbios_mode->enh_table = &res_1360x768[refresh_rate_index];
break;
case 1440:
vbios_mode->enh_table = &res_1440x900[refresh_rate_index];
break;
case 1600:
vbios_mode->enh_table = &res_1600x1200[refresh_rate_index];
if (crtc->mode.crtc_vdisplay == 900)
vbios_mode->enh_table = &res_1600x900[refresh_rate_index];
else
vbios_mode->enh_table = &res_1600x1200[refresh_rate_index];
break;
case 1680:
vbios_mode->enh_table = &res_1680x1050[refresh_rate_index];
......@@ -175,14 +181,17 @@ static bool ast_get_vbios_mode_info(struct drm_crtc *crtc, struct drm_display_mo
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x8d, refresh_rate_index & 0xff);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x8e, mode_id & 0xff);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x91, 0xa8);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x92, crtc->primary->fb->bits_per_pixel);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x93, adjusted_mode->clock / 1000);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x94, adjusted_mode->crtc_hdisplay);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x95, adjusted_mode->crtc_hdisplay >> 8);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x91, 0x00);
if (vbios_mode->enh_table->flags & NewModeInfo) {
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x91, 0xa8);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x92, crtc->primary->fb->bits_per_pixel);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x93, adjusted_mode->clock / 1000);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x94, adjusted_mode->crtc_hdisplay);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x95, adjusted_mode->crtc_hdisplay >> 8);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x96, adjusted_mode->crtc_vdisplay);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x97, adjusted_mode->crtc_vdisplay >> 8);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x96, adjusted_mode->crtc_vdisplay);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x97, adjusted_mode->crtc_vdisplay >> 8);
}
}
return true;
......@@ -389,7 +398,7 @@ static void ast_set_ext_reg(struct drm_crtc *crtc, struct drm_display_mode *mode
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa8, 0xfd, jregA8);
/* Set Threshold */
if (ast->chip == AST2300) {
if (ast->chip == AST2300 || ast->chip == AST2400) {
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa7, 0x78);
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa6, 0x60);
} else if (ast->chip == AST2100 ||
......@@ -451,9 +460,13 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x1, 0xdf, 0);
if (ast->tx_chip_type == AST_TX_DP501)
ast_set_dp501_video_output(crtc->dev, 1);
ast_crtc_load_lut(crtc);
break;
case DRM_MODE_DPMS_OFF:
if (ast->tx_chip_type == AST_TX_DP501)
ast_set_dp501_video_output(crtc->dev, 0);
ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x1, 0xdf, 0x20);
break;
}
......@@ -729,10 +742,24 @@ static int ast_encoder_init(struct drm_device *dev)
static int ast_get_modes(struct drm_connector *connector)
{
struct ast_connector *ast_connector = to_ast_connector(connector);
struct ast_private *ast = connector->dev->dev_private;
struct edid *edid;
int ret;
edid = drm_get_edid(connector, &ast_connector->i2c->adapter);
bool flags = false;
if (ast->tx_chip_type == AST_TX_DP501) {
ast->dp501_maxclk = 0xff;
edid = kmalloc(128, GFP_KERNEL);
if (!edid)
return -ENOMEM;
flags = ast_dp501_read_edid(connector->dev, (u8 *)edid);
if (flags)
ast->dp501_maxclk = ast_get_dp501_max_clk(connector->dev);
else
kfree(edid);
}
if (!flags)
edid = drm_get_edid(connector, &ast_connector->i2c->adapter);
if (edid) {
drm_mode_connector_update_edid_property(&ast_connector->base, edid);
ret = drm_add_edid_modes(connector, edid);
......@@ -746,7 +773,56 @@ static int ast_get_modes(struct drm_connector *connector)
static int ast_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
return MODE_OK;
struct ast_private *ast = connector->dev->dev_private;
int flags = MODE_NOMODE;
uint32_t jtemp;
if (ast->support_wide_screen) {
if ((mode->hdisplay == 1680) && (mode->vdisplay == 1050))
return MODE_OK;
if ((mode->hdisplay == 1280) && (mode->vdisplay == 800))
return MODE_OK;
if ((mode->hdisplay == 1440) && (mode->vdisplay == 900))
return MODE_OK;
if ((mode->hdisplay == 1360) && (mode->vdisplay == 768))
return MODE_OK;
if ((mode->hdisplay == 1600) && (mode->vdisplay == 900))
return MODE_OK;
if ((ast->chip == AST2100) || (ast->chip == AST2200) || (ast->chip == AST2300) || (ast->chip == AST2400) || (ast->chip == AST1180)) {
if ((mode->hdisplay == 1920) && (mode->vdisplay == 1080))
return MODE_OK;
if ((mode->hdisplay == 1920) && (mode->vdisplay == 1200)) {
jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
if (jtemp & 0x01)
return MODE_NOMODE;
else
return MODE_OK;
}
}
}
switch (mode->hdisplay) {
case 640:
if (mode->vdisplay == 480) flags = MODE_OK;
break;
case 800:
if (mode->vdisplay == 600) flags = MODE_OK;
break;
case 1024:
if (mode->vdisplay == 768) flags = MODE_OK;
break;
case 1280:
if (mode->vdisplay == 1024) flags = MODE_OK;
break;
case 1600:
if (mode->vdisplay == 1200) flags = MODE_OK;
break;
default:
return flags;
}
return flags;
}
static void ast_connector_destroy(struct drm_connector *connector)
......
此差异已折叠。
......@@ -42,7 +42,7 @@
#define HBorder 0x00000020
#define VBorder 0x00000010
#define WideScreenMode 0x00000100
#define NewModeInfo 0x00000200
/* DCLK Index */
#define VCLK25_175 0x00
......@@ -67,6 +67,11 @@
#define VCLK106_5 0x12
#define VCLK146_25 0x13
#define VCLK148_5 0x14
#define VCLK71 0x15
#define VCLK88_75 0x16
#define VCLK119 0x17
#define VCLK85_5 0x18
#define VCLK97_75 0x19
static struct ast_vbios_dclk_info dclk_table[] = {
{0x2C, 0xE7, 0x03}, /* 00: VCLK25_175 */
......@@ -90,6 +95,10 @@ static struct ast_vbios_dclk_info dclk_table[] = {
{0x28, 0x49, 0x80}, /* 12: VCLK106.5 */
{0x37, 0x49, 0x80}, /* 13: VCLK146.25 */
{0x1f, 0x45, 0x80}, /* 14: VCLK148.5 */
{0x47, 0x6c, 0x80}, /* 15: VCLK71 */
{0x25, 0x65, 0x80}, /* 16: VCLK88.75 */
{0x77, 0x58, 0x80}, /* 17: VCLK119 */
{0x32, 0x67, 0x80}, /* 18: VCLK85_5 */
};
static struct ast_vbios_stdtable vbios_stdtable[] = {
......@@ -225,41 +234,63 @@ static struct ast_vbios_enhtable res_1600x1200[] = {
(SyncPP | Charx8Dot), 0xFF, 1, 0x33 },
};
static struct ast_vbios_enhtable res_1920x1200[] = {
{2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154, /* 60Hz */
(SyncNP | Charx8Dot), 60, 1, 0x34 },
{2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154, /* 60Hz */
(SyncNP | Charx8Dot), 0xFF, 1, 0x34 },
/* 16:9 */
static struct ast_vbios_enhtable res_1360x768[] = {
{1792, 1360, 64,112, 795, 768, 3, 6, VCLK85_5, /* 60Hz */
(SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x39 },
{1792, 1360, 64,112, 795, 768, 3, 6, VCLK85_5, /* end */
(SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x39 },
};
static struct ast_vbios_enhtable res_1600x900[] = {
{1760, 1600, 48, 32, 926, 900, 3, 5, VCLK97_75, /* 60Hz CVT RB */
(SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x3A },
{1760, 1600, 48, 32, 926, 900, 3, 5, VCLK97_75, /* end */
(SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x3A }
};
static struct ast_vbios_enhtable res_1920x1080[] = {
{2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5, /* 60Hz */
(SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x38 },
{2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5, /* 60Hz */
(SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x38 },
};
/* 16:10 */
static struct ast_vbios_enhtable res_1280x800[] = {
{1440, 1280, 48, 32, 823, 800, 3, 6, VCLK71, /* 60Hz RB */
(SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 35 },
{1680, 1280, 72,128, 831, 800, 3, 6, VCLK83_5, /* 60Hz */
(SyncPN | Charx8Dot | LineCompareOff | WideScreenMode), 60, 1, 0x35 },
(SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x35 },
{1680, 1280, 72,128, 831, 800, 3, 6, VCLK83_5, /* 60Hz */
(SyncPN | Charx8Dot | LineCompareOff | WideScreenMode), 0xFF, 1, 0x35 },
(SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x35 },
};
static struct ast_vbios_enhtable res_1440x900[] = {
{1600, 1440, 48, 32, 926, 900, 3, 6, VCLK88_75, /* 60Hz RB */
(SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x36 },
{1904, 1440, 80,152, 934, 900, 3, 6, VCLK106_5, /* 60Hz */
(SyncPN | Charx8Dot | LineCompareOff | WideScreenMode), 60, 1, 0x36 },
(SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x36 },
{1904, 1440, 80,152, 934, 900, 3, 6, VCLK106_5, /* 60Hz */
(SyncPN | Charx8Dot | LineCompareOff | WideScreenMode), 0xFF, 1, 0x36 },
(SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x36 },
};
static struct ast_vbios_enhtable res_1680x1050[] = {
{1840, 1680, 48, 32, 1080, 1050, 3, 6, VCLK119, /* 60Hz RB */
(SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x37 },
{2240, 1680,104,176, 1089, 1050, 3, 6, VCLK146_25, /* 60Hz */
(SyncPN | Charx8Dot | LineCompareOff | WideScreenMode), 60, 1, 0x37 },
(SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x37 },
{2240, 1680,104,176, 1089, 1050, 3, 6, VCLK146_25, /* 60Hz */
(SyncPN | Charx8Dot | LineCompareOff | WideScreenMode), 0xFF, 1, 0x37 },
(SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x37 },
};
/* HDTV */
static struct ast_vbios_enhtable res_1920x1080[] = {
{2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5, /* 60Hz */
(SyncNP | Charx8Dot | LineCompareOff | WideScreenMode), 60, 1, 0x38 },
{2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5, /* 60Hz */
(SyncNP | Charx8Dot | LineCompareOff | WideScreenMode), 0xFF, 1, 0x38 },
static struct ast_vbios_enhtable res_1920x1200[] = {
{2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154, /* 60Hz */
(SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 60, 1, 0x34 },
{2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154, /* 60Hz */
(SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), 0xFF, 1, 0x34 },
};
#endif
......@@ -225,12 +225,6 @@ int ptn3460_get_modes(struct drm_connector *connector)
return num_modes;
}
static int ptn3460_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
return MODE_OK;
}
struct drm_encoder *ptn3460_best_encoder(struct drm_connector *connector)
{
struct ptn3460_bridge *ptn_bridge;
......@@ -242,7 +236,6 @@ struct drm_encoder *ptn3460_best_encoder(struct drm_connector *connector)
struct drm_connector_helper_funcs ptn3460_connector_helper_funcs = {
.get_modes = ptn3460_get_modes,
.mode_valid = ptn3460_mode_valid,
.best_encoder = ptn3460_best_encoder,
};
......
......@@ -505,13 +505,6 @@ static int cirrus_vga_get_modes(struct drm_connector *connector)
return count;
}
static int cirrus_vga_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
/* Any mode we've added is valid */
return MODE_OK;
}
static struct drm_encoder *cirrus_connector_best_encoder(struct drm_connector
*connector)
{
......@@ -546,7 +539,6 @@ static void cirrus_connector_destroy(struct drm_connector *connector)
struct drm_connector_helper_funcs cirrus_vga_connector_helper_funcs = {
.get_modes = cirrus_vga_get_modes,
.mode_valid = cirrus_vga_mode_valid,
.best_encoder = cirrus_connector_best_encoder,
};
......
......@@ -363,7 +363,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
list->master = dev->primary->master;
*maplist = list;
return 0;
}
}
int drm_addmap(struct drm_device * dev, resource_size_t offset,
unsigned int size, enum drm_map_type type,
......
......@@ -1145,16 +1145,19 @@ EXPORT_SYMBOL(drm_plane_cleanup);
*/
void drm_plane_force_disable(struct drm_plane *plane)
{
struct drm_framebuffer *old_fb = plane->fb;
int ret;
if (!plane->fb)
if (!old_fb)
return;
ret = plane->funcs->disable_plane(plane);
if (ret)
if (ret) {
DRM_ERROR("failed to disable plane with busy fb\n");
return;
}
/* disconnect the plane from the fb and crtc: */
__drm_framebuffer_unreference(plane->fb);
__drm_framebuffer_unreference(old_fb);
plane->fb = NULL;
plane->crtc = NULL;
}
......@@ -1378,6 +1381,12 @@ static int drm_mode_group_init(struct drm_device *dev, struct drm_mode_group *gr
return 0;
}
void drm_mode_group_destroy(struct drm_mode_group *group)
{
kfree(group->id_list);
group->id_list = NULL;
}
/*
* NOTE: Driver's shouldn't ever call drm_mode_group_init_legacy_group - it is
* the drm core's responsibility to set up mode control groups.
......@@ -2116,9 +2125,13 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
if (!plane_req->fb_id) {
drm_modeset_lock_all(dev);
old_fb = plane->fb;
plane->funcs->disable_plane(plane);
plane->crtc = NULL;
plane->fb = NULL;
ret = plane->funcs->disable_plane(plane);
if (!ret) {
plane->crtc = NULL;
plane->fb = NULL;
} else {
old_fb = NULL;
}
drm_modeset_unlock_all(dev);
goto out;
}
......@@ -2187,16 +2200,18 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
}
drm_modeset_lock_all(dev);
old_fb = plane->fb;
ret = plane->funcs->update_plane(plane, crtc, fb,
plane_req->crtc_x, plane_req->crtc_y,
plane_req->crtc_w, plane_req->crtc_h,
plane_req->src_x, plane_req->src_y,
plane_req->src_w, plane_req->src_h);
if (!ret) {
old_fb = plane->fb;
plane->crtc = crtc;
plane->fb = fb;
fb = NULL;
} else {
old_fb = NULL;
}
drm_modeset_unlock_all(dev);
......@@ -2239,9 +2254,7 @@ int drm_mode_set_config_internal(struct drm_mode_set *set)
ret = crtc->funcs->set_config(set);
if (ret == 0) {
crtc->primary->crtc = crtc;
/* crtc->fb must be updated by ->set_config, enforces this. */
WARN_ON(fb != crtc->primary->fb);
crtc->primary->fb = fb;
}
list_for_each_entry(tmp, &crtc->dev->mode_config.crtc_list, head) {
......
......@@ -140,16 +140,10 @@ drm_encoder_disable(struct drm_encoder *encoder)
static void __drm_helper_disable_unused_functions(struct drm_device *dev)
{
struct drm_encoder *encoder;
struct drm_connector *connector;
struct drm_crtc *crtc;
drm_warn_on_modeset_not_all_locked(dev);
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (!connector->encoder)
continue;
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (!drm_helper_encoder_in_use(encoder)) {
drm_encoder_disable(encoder);
......@@ -387,8 +381,7 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
}
EXPORT_SYMBOL(drm_crtc_helper_set_mode);
static int
static void
drm_crtc_helper_disable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
......@@ -417,7 +410,6 @@ drm_crtc_helper_disable(struct drm_crtc *crtc)
}
__drm_helper_disable_unused_functions(dev);
return 0;
}
/**
......@@ -468,7 +460,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
(int)set->num_connectors, set->x, set->y);
} else {
DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
return drm_crtc_helper_disable(set->crtc);
drm_crtc_helper_disable(set->crtc);
return 0;
}
dev = set->crtc->dev;
......
......@@ -206,7 +206,7 @@ i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
* i2c_dp_aux_add_bus() - register an i2c adapter using the aux ch helper
* @adapter: i2c adapter to register
*
* This registers an i2c adapater that uses dp aux channel as it's underlaying
* This registers an i2c adapter that uses dp aux channel as it's underlaying
* transport. The driver needs to fill out the &i2c_algo_dp_aux_data structure
* and store it in the algo_data member of the @adapter argument. This will be
* used by the i2c over dp aux algorithm to drive the hardware.
......
......@@ -984,9 +984,13 @@ static const u8 edid_header[] = {
0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
};
/*
* Sanity check the header of the base EDID block. Return 8 if the header
* is perfect, down to 0 if it's totally wrong.
/**
* drm_edid_header_is_valid - sanity check the header of the base EDID block
* @raw_edid: pointer to raw base EDID block
*
* Sanity check the header of the base EDID block.
*
* Return: 8 if the header is perfect, down to 0 if it's totally wrong.
*/
int drm_edid_header_is_valid(const u8 *raw_edid)
{
......@@ -1005,9 +1009,16 @@ module_param_named(edid_fixup, edid_fixup, int, 0400);
MODULE_PARM_DESC(edid_fixup,
"Minimum number of valid EDID header bytes (0-8, default 6)");
/*
* Sanity check the EDID block (base or extension). Return 0 if the block
* doesn't check out, or 1 if it's valid.
/**
* drm_edid_block_valid - Sanity check the EDID block (base or extension)
* @raw_edid: pointer to raw EDID block
* @block: type of block to validate (0 for base, extension otherwise)
* @print_bad_edid: if true, dump bad EDID blocks to the console
*
* Validate a base or extension EDID block and optionally dump bad blocks to
* the console.
*
* Return: True if the block is valid, false otherwise.
*/
bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid)
{
......@@ -1077,6 +1088,8 @@ EXPORT_SYMBOL(drm_edid_block_valid);
* @edid: EDID data
*
* Sanity-check an entire EDID record (including extensions)
*
* Return: True if the EDID data is valid, false otherwise.
*/
bool drm_edid_is_valid(struct edid *edid)
{
......@@ -1096,18 +1109,15 @@ EXPORT_SYMBOL(drm_edid_is_valid);
#define DDC_SEGMENT_ADDR 0x30
/**
* Get EDID information via I2C.
*
* @adapter : i2c device adaptor
* drm_do_probe_ddc_edid() - get EDID information via I2C
* @adapter: I2C device adaptor
* @buf: EDID data buffer to be filled
* @block: 128 byte EDID block to start fetching from
* @len: EDID data buffer length to fetch
*
* Returns:
*
* 0 on success or -1 on failure.
* Try to fetch EDID information by calling I2C driver functions.
*
* Try to fetch EDID information by calling i2c driver function.
* Return: 0 on success or -1 on failure.
*/
static int
drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
......@@ -1118,7 +1128,8 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
unsigned char xfers = segment ? 3 : 2;
int ret, retries = 5;
/* The core i2c driver will automatically retry the transfer if the
/*
* The core I2C driver will automatically retry the transfer if the
* adapter reports EAGAIN. However, we find that bit-banging transfers
* are susceptible to errors under a heavily loaded machine and
* generate spurious NAKs and timeouts. Retrying the transfer
......@@ -1144,10 +1155,10 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
}
};
/*
* Avoid sending the segment addr to not upset non-compliant ddc
* monitors.
*/
/*
* Avoid sending the segment addr to not upset non-compliant
* DDC monitors.
*/
ret = i2c_transfer(adapter, &msgs[3 - xfers], xfers);
if (ret == -ENXIO) {
......@@ -1246,12 +1257,10 @@ drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
}
/**
* Probe DDC presence.
* @adapter: i2c adapter to probe
* drm_probe_ddc() - probe DDC presence
* @adapter: I2C adapter to probe
*
* Returns:
*
* 1 on success
* Return: True on success, false on failure.
*/
bool
drm_probe_ddc(struct i2c_adapter *adapter)
......@@ -1265,12 +1274,12 @@ EXPORT_SYMBOL(drm_probe_ddc);
/**
* drm_get_edid - get EDID data, if available
* @connector: connector we're probing
* @adapter: i2c adapter to use for DDC
* @adapter: I2C adapter to use for DDC
*
* Poke the given i2c channel to grab EDID data if possible. If found,
* Poke the given I2C channel to grab EDID data if possible. If found,
* attach it to the connector.
*
* Return edid data or NULL if we couldn't find any.
* Return: Pointer to valid EDID or NULL if we couldn't find any.
*/
struct edid *drm_get_edid(struct drm_connector *connector,
struct i2c_adapter *adapter)
......@@ -1288,7 +1297,7 @@ EXPORT_SYMBOL(drm_get_edid);
* drm_edid_duplicate - duplicate an EDID and the extensions
* @edid: EDID to duplicate
*
* Return duplicate edid or NULL on allocation failure.
* Return: Pointer to duplicated EDID or NULL on allocation failure.
*/
struct edid *drm_edid_duplicate(const struct edid *edid)
{
......@@ -1411,7 +1420,8 @@ mode_is_rb(const struct drm_display_mode *mode)
* @rb: Mode reduced-blanking-ness
*
* Walk the DMT mode list looking for a match for the given parameters.
* Return a newly allocated copy of the mode, or NULL if not found.
*
* Return: A newly allocated copy of the mode, or NULL if not found.
*/
struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
int hsize, int vsize, int fresh,
......@@ -1595,14 +1605,13 @@ bad_std_timing(u8 a, u8 b)
* @connector: connector of for the EDID block
* @edid: EDID block to scan
* @t: standard timing params
* @revision: standard timing level
*
* Take the standard timing params (in this case width, aspect, and refresh)
* and convert them into a real mode using CVT/GTF/DMT.
*/
static struct drm_display_mode *
drm_mode_std(struct drm_connector *connector, struct edid *edid,
struct std_timing *t, int revision)
struct std_timing *t)
{
struct drm_device *dev = connector->dev;
struct drm_display_mode *m, *mode = NULL;
......@@ -1623,7 +1632,7 @@ drm_mode_std(struct drm_connector *connector, struct edid *edid,
vrefresh_rate = vfreq + 60;
/* the vdisplay is calculated based on the aspect ratio */
if (aspect_ratio == 0) {
if (revision < 3)
if (edid->revision < 3)
vsize = hsize;
else
vsize = (hsize * 10) / 16;
......@@ -2140,7 +2149,7 @@ do_established_modes(struct detailed_timing *timing, void *c)
/**
* add_established_modes - get est. modes from EDID and add them
* @connector: connector of for the EDID block
* @connector: connector to add mode(s) to
* @edid: EDID block to scan
*
* Each EDID block contains a bitmap of the supported "established modes" list
......@@ -2191,8 +2200,7 @@ do_standard_modes(struct detailed_timing *timing, void *c)
struct drm_display_mode *newmode;
std = &data->data.timings[i];
newmode = drm_mode_std(connector, edid, std,
edid->revision);
newmode = drm_mode_std(connector, edid, std);
if (newmode) {
drm_mode_probed_add(connector, newmode);
closure->modes++;
......@@ -2203,7 +2211,7 @@ do_standard_modes(struct detailed_timing *timing, void *c)
/**
* add_standard_modes - get std. modes from EDID and add them
* @connector: connector of for the EDID block
* @connector: connector to add mode(s) to
* @edid: EDID block to scan
*
* Standard modes can be calculated using the appropriate standard (DMT,
......@@ -2221,8 +2229,7 @@ add_standard_modes(struct drm_connector *connector, struct edid *edid)
struct drm_display_mode *newmode;
newmode = drm_mode_std(connector, edid,
&edid->standard_timings[i],
edid->revision);
&edid->standard_timings[i]);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
......@@ -2425,7 +2432,7 @@ cea_mode_alternate_clock(const struct drm_display_mode *cea_mode)
* drm_match_cea_mode - look for a CEA mode matching given mode
* @to_match: display mode
*
* Returns the CEA Video ID (VIC) of the mode or 0 if it isn't a CEA-861
* Return: The CEA Video ID (VIC) of the mode or 0 if it isn't a CEA-861
* mode.
*/
u8 drm_match_cea_mode(const struct drm_display_mode *to_match)
......@@ -2452,6 +2459,22 @@ u8 drm_match_cea_mode(const struct drm_display_mode *to_match)
}
EXPORT_SYMBOL(drm_match_cea_mode);
/**
* drm_get_cea_aspect_ratio - get the picture aspect ratio corresponding to
* the input VIC from the CEA mode list
* @video_code: ID given to each of the CEA modes
*
* Returns picture aspect ratio
*/
enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code)
{
/* return picture aspect ratio for video_code - 1 to access the
* right array element
*/
return edid_cea_modes[video_code-1].picture_aspect_ratio;
}
EXPORT_SYMBOL(drm_get_cea_aspect_ratio);
/*
* Calculate the alternate clock for HDMI modes (those from the HDMI vendor
* specific block).
......@@ -3023,11 +3046,9 @@ monitor_name(struct detailed_timing *t, void *data)
* @connector: connector corresponding to the HDMI/DP sink
* @edid: EDID to parse
*
* Fill the ELD (EDID-Like Data) buffer for passing to the audio driver.
* Some ELD fields are left to the graphics driver caller:
* - Conn_Type
* - HDCP
* - Port_ID
* Fill the ELD (EDID-Like Data) buffer for passing to the audio driver. The
* Conn_Type, HDCP and Port_ID ELD fields are left for the graphics driver to
* fill in.
*/
void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
{
......@@ -3111,9 +3132,10 @@ EXPORT_SYMBOL(drm_edid_to_eld);
* @sads: pointer that will be set to the extracted SADs
*
* Looks for CEA EDID block and extracts SADs (Short Audio Descriptors) from it.
* Note: returned pointer needs to be kfreed
*
* Return number of found SADs or negative number on error.
* Note: The returned pointer needs to be freed using kfree().
*
* Return: The number of found SADs or negative number on error.
*/
int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads)
{
......@@ -3170,9 +3192,11 @@ EXPORT_SYMBOL(drm_edid_to_sad);
* @sadb: pointer to the speaker block
*
* Looks for CEA EDID block and extracts the Speaker Allocation Data Block from it.
* Note: returned pointer needs to be kfreed
*
* Return number of found Speaker Allocation Blocks or negative number on error.
* Note: The returned pointer needs to be freed using kfree().
*
* Return: The number of found Speaker Allocation Blocks or negative number on
* error.
*/
int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb)
{
......@@ -3219,9 +3243,12 @@ int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb)
EXPORT_SYMBOL(drm_edid_to_speaker_allocation);
/**
* drm_av_sync_delay - HDMI/DP sink audio-video sync delay in millisecond
* drm_av_sync_delay - compute the HDMI/DP sink audio-video sync delay
* @connector: connector associated with the HDMI/DP sink
* @mode: the display mode
*
* Return: The HDMI/DP sink's audio-video sync delay in milliseconds or 0 if
* the sink doesn't support audio or video.
*/
int drm_av_sync_delay(struct drm_connector *connector,
struct drm_display_mode *mode)
......@@ -3263,6 +3290,9 @@ EXPORT_SYMBOL(drm_av_sync_delay);
*
* It's possible for one encoder to be associated with multiple HDMI/DP sinks.
* The policy is now hard coded to simply use the first HDMI/DP sink's ELD.
*
* Return: The connector associated with the first HDMI/DP sink that has ELD
* attached to it.
*/
struct drm_connector *drm_select_eld(struct drm_encoder *encoder,
struct drm_display_mode *mode)
......@@ -3279,11 +3309,12 @@ struct drm_connector *drm_select_eld(struct drm_encoder *encoder,
EXPORT_SYMBOL(drm_select_eld);
/**
* drm_detect_hdmi_monitor - detect whether monitor is hdmi.
* drm_detect_hdmi_monitor - detect whether monitor is HDMI
* @edid: monitor EDID information
*
* Parse the CEA extension according to CEA-861-B.
* Return true if HDMI, false if not or unknown.
*
* Return: True if the monitor is HDMI, false if not or unknown.
*/
bool drm_detect_hdmi_monitor(struct edid *edid)
{
......@@ -3321,6 +3352,7 @@ EXPORT_SYMBOL(drm_detect_hdmi_monitor);
* audio format, assume at least 'basic audio' support, even if 'basic
* audio' is not defined in EDID.
*
* Return: True if the monitor supports audio, false otherwise.
*/
bool drm_detect_monitor_audio(struct edid *edid)
{
......@@ -3364,6 +3396,8 @@ EXPORT_SYMBOL(drm_detect_monitor_audio);
* Check whether the monitor reports the RGB quantization range selection
* as supported. The AVI infoframe can then be used to inform the monitor
* which quantization range (full or limited) is used.
*
* Return: True if the RGB quantization range is selectable, false otherwise.
*/
bool drm_rgb_quant_range_selectable(struct edid *edid)
{
......@@ -3468,11 +3502,11 @@ static void drm_add_display_info(struct edid *edid,
/**
* drm_add_edid_modes - add modes from EDID data, if available
* @connector: connector we're probing
* @edid: edid data
* @edid: EDID data
*
* Add the specified modes to the connector's mode list.
*
* Return number of modes added or 0 if we couldn't find any.
* Return: The number of modes added or 0 if we couldn't find any.
*/
int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
{
......@@ -3534,7 +3568,7 @@ EXPORT_SYMBOL(drm_add_edid_modes);
* Add the specified modes to the connector's mode list. Only when the
* hdisplay/vdisplay is not beyond the given limit, it will be added.
*
* Return number of modes added or 0 if we couldn't find any.
* Return: The number of modes added or 0 if we couldn't find any.
*/
int drm_add_modes_noedid(struct drm_connector *connector,
int hdisplay, int vdisplay)
......@@ -3573,13 +3607,22 @@ int drm_add_modes_noedid(struct drm_connector *connector,
}
EXPORT_SYMBOL(drm_add_modes_noedid);
/**
* drm_set_preferred_mode - Sets the preferred mode of a connector
* @connector: connector whose mode list should be processed
* @hpref: horizontal resolution of preferred mode
* @vpref: vertical resolution of preferred mode
*
* Marks a mode as preferred if it matches the resolution specified by @hpref
* and @vpref.
*/
void drm_set_preferred_mode(struct drm_connector *connector,
int hpref, int vpref)
{
struct drm_display_mode *mode;
list_for_each_entry(mode, &connector->probed_modes, head) {
if (mode->hdisplay == hpref &&
if (mode->hdisplay == hpref &&
mode->vdisplay == vpref)
mode->type |= DRM_MODE_TYPE_PREFERRED;
}
......@@ -3592,7 +3635,7 @@ EXPORT_SYMBOL(drm_set_preferred_mode);
* @frame: HDMI AVI infoframe
* @mode: DRM display mode
*
* Returns 0 on success or a negative error code on failure.
* Return: 0 on success or a negative error code on failure.
*/
int
drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
......@@ -3613,6 +3656,12 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
frame->video_code = drm_match_cea_mode(mode);
frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
/* Populate picture aspect ratio from CEA mode list */
if (frame->video_code > 0)
frame->picture_aspect = drm_get_cea_aspect_ratio(
frame->video_code);
frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
......@@ -3657,7 +3706,7 @@ s3d_structure_from_display_mode(const struct drm_display_mode *mode)
* 4k or stereoscopic 3D mode. So when giving any other mode as input this
* function will return -EINVAL, error that can be safely ignored.
*
* Returns 0 on success or a negative error code on failure.
* Return: 0 on success or a negative error code on failure.
*/
int
drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
......
......@@ -45,13 +45,13 @@ static LIST_HEAD(kernel_fb_helper_list);
* DOC: fbdev helpers
*
* The fb helper functions are useful to provide an fbdev on top of a drm kernel
* mode setting driver. They can be used mostly independantely from the crtc
* mode setting driver. They can be used mostly independently from the crtc
* helper functions used by many drivers to implement the kernel mode setting
* interfaces.
*
* Initialization is done as a three-step process with drm_fb_helper_init(),
* drm_fb_helper_single_add_all_connectors() and drm_fb_helper_initial_config().
* Drivers with fancier requirements than the default beheviour can override the
* Drivers with fancier requirements than the default behaviour can override the
* second step with their own code. Teardown is done with drm_fb_helper_fini().
*
* At runtime drivers should restore the fbdev console by calling
......@@ -59,7 +59,7 @@ static LIST_HEAD(kernel_fb_helper_list);
* should also notify the fb helper code from updates to the output
* configuration by calling drm_fb_helper_hotplug_event(). For easier
* integration with the output polling code in drm_crtc_helper.c the modeset
* code proves a ->output_poll_changed callback.
* code provides a ->output_poll_changed callback.
*
* All other functions exported by the fb helper library can be used to
* implement the fbdev driver interface by the driver.
......@@ -326,12 +326,21 @@ static bool drm_fb_helper_force_kernel_mode(void)
return false;
list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
if (helper->dev->switch_power_state == DRM_SWITCH_POWER_OFF)
struct drm_device *dev = helper->dev;
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
continue;
if (!mutex_trylock(&dev->mode_config.mutex)) {
error = true;
continue;
}
ret = drm_fb_helper_restore_fbdev_mode(helper);
if (ret)
error = true;
mutex_unlock(&dev->mode_config.mutex);
}
return error;
}
......
......@@ -43,8 +43,7 @@
DEFINE_MUTEX(drm_global_mutex);
EXPORT_SYMBOL(drm_global_mutex);
static int drm_open_helper(struct inode *inode, struct file *filp,
struct drm_minor *minor);
static int drm_open_helper(struct file *filp, struct drm_minor *minor);
static int drm_setup(struct drm_device * dev)
{
......@@ -95,7 +94,7 @@ int drm_open(struct inode *inode, struct file *filp)
/* share address_space across all char-devs of a single device */
filp->f_mapping = dev->anon_inode->i_mapping;
retcode = drm_open_helper(inode, filp, minor);
retcode = drm_open_helper(filp, minor);
if (retcode)
goto err_undo;
if (need_setup) {
......@@ -171,7 +170,6 @@ static int drm_cpu_valid(void)
/**
* Called whenever a process opens /dev/drm.
*
* \param inode device inode.
* \param filp file pointer.
* \param minor acquired minor-object.
* \return zero on success or a negative number on failure.
......@@ -179,8 +177,7 @@ static int drm_cpu_valid(void)
* Creates and initializes a drm_file structure for the file private data in \p
* filp and add it into the double linked list in \p dev.
*/
static int drm_open_helper(struct inode *inode, struct file *filp,
struct drm_minor *minor)
static int drm_open_helper(struct file *filp, struct drm_minor *minor)
{
struct drm_device *dev = minor->dev;
struct drm_file *priv;
......
此差异已折叠。
......@@ -124,7 +124,6 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
.y2 = crtc->mode.vdisplay,
};
struct drm_connector **connector_list;
struct drm_framebuffer *tmpfb;
int num_connectors, ret;
if (!crtc->enabled) {
......@@ -145,6 +144,8 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
}
/* Disallow scaling */
src_w >>= 16;
src_h >>= 16;
if (crtc_w != src_w || crtc_h != src_h) {
DRM_DEBUG_KMS("Can't scale primary plane\n");
return -EINVAL;
......@@ -176,21 +177,14 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
set.num_connectors = num_connectors;
/*
* set_config() adjusts crtc->primary->fb; however the DRM setplane
* code that called us expects to handle the framebuffer update and
* reference counting; save and restore the current fb before
* calling it.
*
* N.B., we call set_config() directly here rather than using
* We call set_config() directly here rather than using
* drm_mode_set_config_internal. We're reprogramming the same
* connectors that were already in use, so we shouldn't need the extra
* cross-CRTC fb refcounting to accomodate stealing connectors.
* drm_mode_setplane() already handles the basic refcounting for the
* framebuffers involved in this operation.
*/
tmpfb = plane->fb;
ret = crtc->funcs->set_config(&set);
plane->fb = tmpfb;
kfree(connector_list);
return ret;
......@@ -232,7 +226,6 @@ EXPORT_SYMBOL(drm_primary_helper_disable);
*/
void drm_primary_helper_destroy(struct drm_plane *plane)
{
plane->funcs->disable_plane(plane);
drm_plane_cleanup(plane);
kfree(plane);
}
......
......@@ -151,7 +151,7 @@ static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connect
drm_mode_validate_flag(connector, mode_flags);
list_for_each_entry(mode, &connector->modes, head) {
if (mode->status == MODE_OK)
if (mode->status == MODE_OK && connector_funcs->mode_valid)
mode->status = connector_funcs->mode_valid(connector,
mode);
}
......
......@@ -294,6 +294,7 @@ static void drm_minor_free(struct drm_device *dev, unsigned int type)
slot = drm_minor_get_slot(dev, type);
if (*slot) {
drm_mode_group_destroy(&(*slot)->mode_group);
kfree(*slot);
*slot = NULL;
}
......
......@@ -949,12 +949,6 @@ static int exynos_dp_get_modes(struct drm_connector *connector)
return 1;
}
static int exynos_dp_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
return MODE_OK;
}
static struct drm_encoder *exynos_dp_best_encoder(
struct drm_connector *connector)
{
......@@ -965,7 +959,6 @@ static struct drm_encoder *exynos_dp_best_encoder(
static struct drm_connector_helper_funcs exynos_dp_connector_helper_funcs = {
.get_modes = exynos_dp_get_modes,
.mode_valid = exynos_dp_mode_valid,
.best_encoder = exynos_dp_best_encoder,
};
......
......@@ -94,12 +94,6 @@ static int exynos_dpi_get_modes(struct drm_connector *connector)
return 0;
}
static int exynos_dpi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
return MODE_OK;
}
static struct drm_encoder *
exynos_dpi_best_encoder(struct drm_connector *connector)
{
......@@ -110,7 +104,6 @@ exynos_dpi_best_encoder(struct drm_connector *connector)
static struct drm_connector_helper_funcs exynos_dpi_connector_helper_funcs = {
.get_modes = exynos_dpi_get_modes,
.mode_valid = exynos_dpi_mode_valid,
.best_encoder = exynos_dpi_best_encoder,
};
......
......@@ -533,12 +533,6 @@ static int vidi_get_modes(struct drm_connector *connector)
return drm_add_edid_modes(connector, edid);
}
static int vidi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
return MODE_OK;
}
static struct drm_encoder *vidi_best_encoder(struct drm_connector *connector)
{
struct vidi_context *ctx = ctx_from_connector(connector);
......@@ -548,7 +542,6 @@ static struct drm_encoder *vidi_best_encoder(struct drm_connector *connector)
static struct drm_connector_helper_funcs vidi_connector_helper_funcs = {
.get_modes = vidi_get_modes,
.mode_valid = vidi_mode_valid,
.best_encoder = vidi_best_encoder,
};
......
......@@ -455,8 +455,8 @@ static void cpt_set_fifo_underrun_reporting(struct drm_device *dev,
*
* Returns the previous state of underrun reporting.
*/
bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe, bool enable)
static bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe, bool enable)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
......
......@@ -3910,7 +3910,7 @@ static void intel_crtc_disable_planes(struct drm_crtc *crtc)
int plane = intel_crtc->plane;
intel_crtc_wait_for_pending_flips(crtc);
drm_vblank_off(dev, pipe);
drm_crtc_vblank_off(crtc);
if (dev_priv->fbc.plane == plane)
intel_disable_fbc(dev);
......@@ -4000,6 +4000,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
intel_crtc_enable_planes(crtc);
drm_crtc_vblank_on(crtc);
}
/* IPS only exists on ULT machines and is tied to pipe A. */
......@@ -4113,6 +4114,8 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
* to change the workaround. */
haswell_mode_set_planes_workaround(intel_crtc);
intel_crtc_enable_planes(crtc);
drm_crtc_vblank_on(crtc);
}
static void ironlake_pfit_disable(struct intel_crtc *crtc)
......@@ -4620,6 +4623,8 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
encoder->enable(encoder);
intel_crtc_enable_planes(crtc);
drm_crtc_vblank_on(crtc);
}
static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
......@@ -4697,6 +4702,8 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
encoder->enable(encoder);
intel_crtc_enable_planes(crtc);
drm_crtc_vblank_on(crtc);
}
static void i9xx_pfit_disable(struct intel_crtc *crtc)
......@@ -8815,7 +8822,7 @@ static void do_intel_finish_page_flip(struct drm_device *dev,
if (work->event)
drm_send_vblank_event(dev, intel_crtc->pipe, work->event);
drm_vblank_put(dev, intel_crtc->pipe);
drm_crtc_vblank_put(crtc);
spin_unlock_irqrestore(&dev->event_lock, flags);
......@@ -9197,7 +9204,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
work->old_fb_obj = to_intel_framebuffer(old_fb)->obj;
INIT_WORK(&work->work, intel_unpin_work_fn);
ret = drm_vblank_get(dev, intel_crtc->pipe);
ret = drm_crtc_vblank_get(crtc);
if (ret)
goto free_work;
......@@ -9206,7 +9213,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
if (intel_crtc->unpin_work) {
spin_unlock_irqrestore(&dev->event_lock, flags);
kfree(work);
drm_vblank_put(dev, intel_crtc->pipe);
drm_crtc_vblank_put(crtc);
DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
return -EBUSY;
......@@ -9280,7 +9287,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
intel_crtc->unpin_work = NULL;
spin_unlock_irqrestore(&dev->event_lock, flags);
drm_vblank_put(dev, intel_crtc->pipe);
drm_crtc_vblank_put(crtc);
free_work:
kfree(work);
......@@ -10901,6 +10908,8 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
}
enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
......@@ -11838,11 +11847,18 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
encoder->base.crtc = NULL;
}
}
if (crtc->active) {
if (crtc->active || IS_VALLEYVIEW(dev) || INTEL_INFO(dev)->gen < 5) {
/*
* We start out with underrun reporting disabled to avoid races.
* For correct bookkeeping mark this on active crtcs.
*
* Also on gmch platforms we dont have any hardware bits to
* disable the underrun reporting. Which means we need to start
* out with underrun reporting disabled also on inactive pipes,
* since otherwise we'll complain about the garbage we read when
* e.g. coming up after runtime pm.
*
* No protection against concurrent access is required - at
* worst a fifo underrun happens which also sets this to false.
*/
......
......@@ -668,8 +668,6 @@ hdmi_to_dig_port(struct intel_hdmi *intel_hdmi)
/* i915_irq.c */
bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe, bool enable);
bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
enum pipe pipe, bool enable);
bool intel_set_pch_fifo_underrun_reporting(struct drm_device *dev,
enum transcoder pch_transcoder,
bool enable);
......
......@@ -5635,33 +5635,6 @@ static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
}
}
static void reset_vblank_counter(struct drm_device *dev, enum pipe pipe)
{
assert_spin_locked(&dev->vbl_lock);
dev->vblank[pipe].last = 0;
}
static void hsw_power_well_post_disable(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
enum pipe pipe;
unsigned long irqflags;
/*
* After this, the registers on the pipes that are part of the power
* well will become zero, so we have to adjust our counters according to
* that.
*
* FIXME: Should we do this in general in drm_vblank_post_modeset?
*/
spin_lock_irqsave(&dev->vbl_lock, irqflags);
for_each_pipe(pipe)
if (pipe != PIPE_A)
reset_vblank_counter(dev, pipe);
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
static void hsw_set_power_well(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well, bool enable)
{
......@@ -5690,8 +5663,6 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
I915_WRITE(HSW_PWR_WELL_DRIVER, 0);
POSTING_READ(HSW_PWR_WELL_DRIVER);
DRM_DEBUG_KMS("Requesting to disable the power well\n");
hsw_power_well_post_disable(dev_priv);
}
}
}
......@@ -5848,23 +5819,12 @@ static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
struct drm_device *dev = dev_priv->dev;
enum pipe pipe;
WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
spin_lock_irq(&dev_priv->irq_lock);
for_each_pipe(pipe)
__intel_set_cpu_fifo_underrun_reporting(dev, pipe, false);
valleyview_disable_display_irqs(dev_priv);
spin_unlock_irq(&dev_priv->irq_lock);
spin_lock_irq(&dev->vbl_lock);
for_each_pipe(pipe)
reset_vblank_counter(dev, pipe);
spin_unlock_irq(&dev->vbl_lock);
vlv_set_power_well(dev_priv, power_well, false);
}
......
......@@ -57,15 +57,8 @@ static int rcar_du_lvds_connector_get_modes(struct drm_connector *connector)
return 1;
}
static int rcar_du_lvds_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
return MODE_OK;
}
static const struct drm_connector_helper_funcs connector_helper_funcs = {
.get_modes = rcar_du_lvds_connector_get_modes,
.mode_valid = rcar_du_lvds_connector_mode_valid,
.best_encoder = rcar_du_connector_best_encoder,
};
......
......@@ -25,15 +25,8 @@ static int rcar_du_vga_connector_get_modes(struct drm_connector *connector)
return 0;
}
static int rcar_du_vga_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
return MODE_OK;
}
static const struct drm_connector_helper_funcs connector_helper_funcs = {
.get_modes = rcar_du_vga_connector_get_modes,
.mode_valid = rcar_du_vga_connector_mode_valid,
.best_encoder = rcar_du_connector_best_encoder,
};
......
......@@ -674,12 +674,6 @@ static int shmob_drm_connector_get_modes(struct drm_connector *connector)
return 1;
}
static int shmob_drm_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
return MODE_OK;
}
static struct drm_encoder *
shmob_drm_connector_best_encoder(struct drm_connector *connector)
{
......@@ -690,7 +684,6 @@ shmob_drm_connector_best_encoder(struct drm_connector *connector)
static const struct drm_connector_helper_funcs connector_helper_funcs = {
.get_modes = shmob_drm_connector_get_modes,
.mode_valid = shmob_drm_connector_mode_valid,
.best_encoder = shmob_drm_connector_best_encoder,
};
......
......@@ -200,13 +200,6 @@ static const struct file_operations imx_drm_driver_fops = {
.llseek = noop_llseek,
};
int imx_drm_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
return MODE_OK;
}
EXPORT_SYMBOL(imx_drm_connector_mode_valid);
void imx_drm_connector_destroy(struct drm_connector *connector)
{
drm_sysfs_connector_remove(connector);
......
......@@ -50,8 +50,6 @@ int imx_drm_encoder_get_mux_id(struct device_node *node,
int imx_drm_encoder_parse_of(struct drm_device *drm,
struct drm_encoder *encoder, struct device_node *np);
int imx_drm_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode);
void imx_drm_connector_destroy(struct drm_connector *connector);
void imx_drm_encoder_destroy(struct drm_encoder *encoder);
......
......@@ -1492,7 +1492,6 @@ static struct drm_connector_funcs imx_hdmi_connector_funcs = {
static struct drm_connector_helper_funcs imx_hdmi_connector_helper_funcs = {
.get_modes = imx_hdmi_connector_get_modes,
.mode_valid = imx_drm_connector_mode_valid,
.best_encoder = imx_hdmi_connector_best_encoder,
};
......
......@@ -317,7 +317,6 @@ static struct drm_connector_funcs imx_ldb_connector_funcs = {
static struct drm_connector_helper_funcs imx_ldb_connector_helper_funcs = {
.get_modes = imx_ldb_connector_get_modes,
.best_encoder = imx_ldb_connector_best_encoder,
.mode_valid = imx_drm_connector_mode_valid,
};
static struct drm_encoder_funcs imx_ldb_encoder_funcs = {
......
......@@ -251,10 +251,6 @@ static int imx_tve_connector_mode_valid(struct drm_connector *connector,
unsigned long rate;
int ret;
ret = imx_drm_connector_mode_valid(connector, mode);
if (ret != MODE_OK)
return ret;
/* pixel clock with 2x oversampling */
rate = clk_round_rate(tve->clk, 2000UL * mode->clock) / 2000;
if (rate == mode->clock)
......
......@@ -148,7 +148,6 @@ static struct drm_connector_funcs imx_pd_connector_funcs = {
static struct drm_connector_helper_funcs imx_pd_connector_helper_funcs = {
.get_modes = imx_pd_connector_get_modes,
.best_encoder = imx_pd_connector_best_encoder,
.mode_valid = imx_drm_connector_mode_valid,
};
static struct drm_encoder_funcs imx_pd_encoder_funcs = {
......
......@@ -1024,14 +1024,17 @@ struct drm_pending_vblank_event {
};
struct drm_vblank_crtc {
struct drm_device *dev; /* pointer to the drm_device */
wait_queue_head_t queue; /**< VBLANK wait queue */
struct timeval time[DRM_VBLANKTIME_RBSIZE]; /**< timestamp of current count */
struct timer_list disable_timer; /* delayed disable timer */
atomic_t count; /**< number of VBLANK interrupts */
atomic_t refcount; /* number of users of vblank interruptsper crtc */
u32 last; /* protected by dev->vbl_lock, used */
/* for wraparound handling */
u32 last_wait; /* Last vblank seqno waited per CRTC */
unsigned int inmodeset; /* Display driver is setting mode */
int crtc; /* crtc index */
bool enabled; /* so we don't call enable more than
once per disable */
};
......@@ -1119,7 +1122,6 @@ struct drm_device {
spinlock_t vblank_time_lock; /**< Protects vblank count and time updates during vblank enable/disable */
spinlock_t vbl_lock;
struct timer_list vblank_disable_timer;
u32 max_vblank_count; /**< size of vblank counter register */
......@@ -1357,8 +1359,14 @@ extern void drm_send_vblank_event(struct drm_device *dev, int crtc,
extern bool drm_handle_vblank(struct drm_device *dev, int crtc);
extern int drm_vblank_get(struct drm_device *dev, int crtc);
extern void drm_vblank_put(struct drm_device *dev, int crtc);
extern int drm_crtc_vblank_get(struct drm_crtc *crtc);
extern void drm_crtc_vblank_put(struct drm_crtc *crtc);
extern void drm_vblank_off(struct drm_device *dev, int crtc);
extern void drm_vblank_on(struct drm_device *dev, int crtc);
extern void drm_crtc_vblank_off(struct drm_crtc *crtc);
extern void drm_crtc_vblank_on(struct drm_crtc *crtc);
extern void drm_vblank_cleanup(struct drm_device *dev);
extern u32 drm_get_last_vbltimestamp(struct drm_device *dev, int crtc,
struct timeval *tvblank, unsigned flags);
extern int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,
......
......@@ -915,6 +915,7 @@ extern const char *drm_get_tv_subconnector_name(int val);
extern const char *drm_get_tv_select_name(int val);
extern void drm_fb_release(struct drm_file *file_priv);
extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group);
extern void drm_mode_group_destroy(struct drm_mode_group *group);
extern bool drm_probe_ddc(struct i2c_adapter *adapter);
extern struct edid *drm_get_edid(struct drm_connector *connector,
struct i2c_adapter *adapter);
......@@ -1020,6 +1021,7 @@ extern int drm_mode_gamma_get_ioctl(struct drm_device *dev,
extern int drm_mode_gamma_set_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern u8 drm_match_cea_mode(const struct drm_display_mode *to_match);
extern enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code);
extern bool drm_detect_hdmi_monitor(struct edid *edid);
extern bool drm_detect_monitor_audio(struct edid *edid);
extern bool drm_rgb_quant_range_selectable(struct edid *edid);
......
......@@ -114,7 +114,7 @@ struct drm_encoder_helper_funcs {
/**
* drm_connector_helper_funcs - helper operations for connectors
* @get_modes: get mode list for this connector
* @mode_valid: is this mode valid on the given connector?
* @mode_valid (optional): is this mode valid on the given connector?
*
* The helper operations are called by the mid-layer CRTC helper.
*/
......
......@@ -57,6 +57,7 @@ typedef void (*drm_flip_func_t)(struct drm_flip_work *work, void *val);
* @count: number of committed items
* @func: callback fxn called for each committed item
* @worker: worker which calls @func
* @fifo: queue of committed items
*/
struct drm_flip_work {
const char *name;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册