提交 d3f7eae1 编写于 作者: A Andi Kleen 提交者: Linus Torvalds

i386: Use global flag to disable broken local apic timer on AMD CPUs.

The Averatec 2370 and some other Turion laptop BIOS seems to program the
ENABLE_C1E MSR inconsistently between cores. This confuses the lapic
use heuristics because when C1E is enabled anywhere it seems to affect
the complete chip.

Use a global flag instead of a per cpu flag to handle this.
If any CPU has C1E enabled disabled lapic use.

Thanks to Cal Peake for debugging.

Cc: tglx@linutronix.de
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 d2d0251f
...@@ -61,8 +61,9 @@ static int enable_local_apic __initdata = 0; ...@@ -61,8 +61,9 @@ static int enable_local_apic __initdata = 0;
/* Local APIC timer verification ok */ /* Local APIC timer verification ok */
static int local_apic_timer_verify_ok; static int local_apic_timer_verify_ok;
/* Disable local APIC timer from the kernel commandline or via dmi quirk */ /* Disable local APIC timer from the kernel commandline or via dmi quirk
static int local_apic_timer_disabled; or using CPU MSR check */
int local_apic_timer_disabled;
/* Local APIC timer works in C2 */ /* Local APIC timer works in C2 */
int local_apic_timer_c2_ok; int local_apic_timer_c2_ok;
EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
...@@ -370,12 +371,9 @@ void __init setup_boot_APIC_clock(void) ...@@ -370,12 +371,9 @@ void __init setup_boot_APIC_clock(void)
long delta, deltapm; long delta, deltapm;
int pm_referenced = 0; int pm_referenced = 0;
if (boot_cpu_has(X86_FEATURE_LAPIC_TIMER_BROKEN))
local_apic_timer_disabled = 1;
/* /*
* The local apic timer can be disabled via the kernel * The local apic timer can be disabled via the kernel
* commandline or from the test above. Register the lapic * commandline or from the CPU detection code. Register the lapic
* timer as a dummy clock event source on SMP systems, so the * timer as a dummy clock event source on SMP systems, so the
* broadcast mechanism is used. On UP systems simply ignore it. * broadcast mechanism is used. On UP systems simply ignore it.
*/ */
......
...@@ -3,6 +3,7 @@ ...@@ -3,6 +3,7 @@
#include <linux/mm.h> #include <linux/mm.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/apic.h>
#include "cpu.h" #include "cpu.h"
...@@ -22,6 +23,7 @@ ...@@ -22,6 +23,7 @@
extern void vide(void); extern void vide(void);
__asm__(".align 4\nvide: ret"); __asm__(".align 4\nvide: ret");
#ifdef CONFIG_X86_LOCAL_APIC
#define ENABLE_C1E_MASK 0x18000000 #define ENABLE_C1E_MASK 0x18000000
#define CPUID_PROCESSOR_SIGNATURE 1 #define CPUID_PROCESSOR_SIGNATURE 1
#define CPUID_XFAM 0x0ff00000 #define CPUID_XFAM 0x0ff00000
...@@ -52,6 +54,7 @@ static __cpuinit int amd_apic_timer_broken(void) ...@@ -52,6 +54,7 @@ static __cpuinit int amd_apic_timer_broken(void)
} }
return 0; return 0;
} }
#endif
int force_mwait __cpuinitdata; int force_mwait __cpuinitdata;
...@@ -282,8 +285,10 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) ...@@ -282,8 +285,10 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
num_cache_leaves = 3; num_cache_leaves = 3;
} }
#ifdef CONFIG_X86_LOCAL_APIC
if (amd_apic_timer_broken()) if (amd_apic_timer_broken())
set_bit(X86_FEATURE_LAPIC_TIMER_BROKEN, c->x86_capability); local_apic_timer_disabled = 1;
#endif
if (c->x86 == 0x10 && !force_mwait) if (c->x86 == 0x10 && !force_mwait)
clear_bit(X86_FEATURE_MWAIT, c->x86_capability); clear_bit(X86_FEATURE_MWAIT, c->x86_capability);
......
...@@ -116,6 +116,8 @@ extern void enable_NMI_through_LVT0 (void * dummy); ...@@ -116,6 +116,8 @@ extern void enable_NMI_through_LVT0 (void * dummy);
extern int timer_over_8254; extern int timer_over_8254;
extern int local_apic_timer_c2_ok; extern int local_apic_timer_c2_ok;
extern int local_apic_timer_disabled;
#else /* !CONFIG_X86_LOCAL_APIC */ #else /* !CONFIG_X86_LOCAL_APIC */
static inline void lapic_shutdown(void) { } static inline void lapic_shutdown(void) { }
......
...@@ -79,7 +79,7 @@ ...@@ -79,7 +79,7 @@
#define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */ #define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */ #define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */
#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */ #define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
#define X86_FEATURE_LAPIC_TIMER_BROKEN (3*32+ 14) /* lapic timer broken in C1 */ /* 14 free */
#define X86_FEATURE_SYNC_RDTSC (3*32+15) /* RDTSC synchronizes the CPU */ #define X86_FEATURE_SYNC_RDTSC (3*32+15) /* RDTSC synchronizes the CPU */
#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */ #define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册