iwlwifi: size firmware flags memory correctly

Instead of relying on a hard-coded constant of a maximum of 64 API and
capability bits, add a new enum value after the others that will then
always track the number of used bits in the API/capabilities. We thus
no longer need to maintain the maximum number, and on 32-bit platforms
even (currently) reduce the number of bits kept in memory.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

drivers/net/wireless/iwlwifi/iwl-drv.c

@@ -450,7 +450,7 @@ static int iwl_set_ucode_api_flags(struct iwl_drv *drv, const u8 *data,
 	u32 api_flags = le32_to_cpu(ucode_api->api_flags);
 	int i;
 
-	if (api_index >= IWL_API_MAX_BITS / 32) {
+	if (api_index >= DIV_ROUND_UP(NUM_IWL_UCODE_TLV_API, 32)) {
 		IWL_ERR(drv, "api_index larger than supported by driver\n");
 		/* don't return an error so we can load FW that has more bits */
 		return 0;
@@ -472,7 +472,7 @@ static int iwl_set_ucode_capabilities(struct iwl_drv *drv, const u8 *data,
 	u32 api_flags = le32_to_cpu(ucode_capa->api_capa);
 	int i;
 
-	if (api_index >= IWL_CAPABILITIES_MAX_BITS / 32) {
+	if (api_index >= DIV_ROUND_UP(NUM_IWL_UCODE_TLV_CAPA, 32)) {
 		IWL_ERR(drv, "api_index larger than supported by driver\n");
 		/* don't return an error so we can load FW that has more bits */
 		return 0;

drivers/net/wireless/iwlwifi/iwl-fw-file.h

@@ -254,6 +254,8 @@ typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t;
  *	instead of 3.
  * @IWL_UCODE_TLV_API_TX_POWER_CHAIN: TX power API has larger command size
  *	(command version 3) that supports per-chain limits
+ *
+ * @NUM_IWL_UCODE_TLV_API: number of bits used
  */
 enum iwl_ucode_tlv_api {
 	IWL_UCODE_TLV_API_BT_COEX_SPLIT         = (__force iwl_ucode_tlv_api_t)3,
@@ -264,6 +266,12 @@ enum iwl_ucode_tlv_api {
 	IWL_UCODE_TLV_API_NEW_VERSION		= (__force iwl_ucode_tlv_api_t)20,
 	IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY	= (__force iwl_ucode_tlv_api_t)24,
 	IWL_UCODE_TLV_API_TX_POWER_CHAIN	= (__force iwl_ucode_tlv_api_t)27,
+
+	NUM_IWL_UCODE_TLV_API
+#ifdef __CHECKER__
+		/* sparse says it cannot increment the previous enum member */
+		= 128
+#endif
 };
 
 typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t;
@@ -298,6 +306,8 @@ typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t;
  *	is supported.
  * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
  * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan
+ *
+ * @NUM_IWL_UCODE_TLV_CAPA: number of bits used
  */
 enum iwl_ucode_tlv_capa {
 	IWL_UCODE_TLV_CAPA_D0I3_SUPPORT			= (__force iwl_ucode_tlv_capa_t)0,
@@ -320,6 +330,12 @@ enum iwl_ucode_tlv_capa {
 	IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC		= (__force iwl_ucode_tlv_capa_t)29,
 	IWL_UCODE_TLV_CAPA_BT_COEX_RRC			= (__force iwl_ucode_tlv_capa_t)30,
 	IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT		= (__force iwl_ucode_tlv_capa_t)31,
+
+	NUM_IWL_UCODE_TLV_CAPA
+#ifdef __CHECKER__
+		/* sparse says it cannot increment the previous enum member */
+		= 128
+#endif
 };
 
 /* The default calibrate table size if not specified by firmware file */
@@ -330,9 +346,6 @@ enum iwl_ucode_tlv_capa {
 /* The default max probe length if not specified by the firmware file */
 #define IWL_DEFAULT_MAX_PROBE_LENGTH	200
 
-#define IWL_API_MAX_BITS		64
-#define IWL_CAPABILITIES_MAX_BITS	64
-
 /*
  * For 16.0 uCode and above, there is no differentiation between sections,
  * just an offset to the HW address.

drivers/net/wireless/iwlwifi/iwl-fw.h

@@ -105,8 +105,8 @@ struct iwl_ucode_capabilities {
 	u32 n_scan_channels;
 	u32 standard_phy_calibration_size;
 	u32 flags;
-	unsigned long _api[BITS_TO_LONGS(IWL_API_MAX_BITS)];
-	unsigned long _capa[BITS_TO_LONGS(IWL_CAPABILITIES_MAX_BITS)];
+	unsigned long _api[BITS_TO_LONGS(NUM_IWL_UCODE_TLV_API)];
+	unsigned long _capa[BITS_TO_LONGS(NUM_IWL_UCODE_TLV_CAPA)];
 };
 
 static inline bool