提交 d3ead3a2 编写于 作者: L Linus Torvalds

Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata and starting/stopping ATAPI floppy devices
  sata_sil24: prevent hba lockup when pass-through ATA commands are used
  Update kernel parameter document for libata DMA mode setting knobs.
  libata: don't normalize UNKNOWN to NONE after reset
  libata-pmp: propagate timeout to host link
  libata-pmp: 4726 hates SRST
  pata_ixp4xx_cf: fix compilation introduced by ata_port_desc() conversion
  pata_pdc202xx_old: Further fixups
  libata-sff: PCI IRQ handling fix
  sata_qstor: use hardreset instead of softreset
......@@ -883,6 +883,14 @@ and is between 256 and 4096 characters. It is defined in the file
lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer in
C2 power state.
libata.dma= [LIBATA] DMA control
libata.dma=0 Disable all PATA and SATA DMA
libata.dma=1 PATA and SATA Disk DMA only
libata.dma=2 ATAPI (CDROM) DMA only
libata.dma=4 Compact Flash DMA only
Combinations also work, so libata.dma=3 enables DMA
for disks and CDROMs, but not CFs.
libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
when set.
Format: <int>
......
......@@ -1733,11 +1733,15 @@ static void ata_eh_link_autopsy(struct ata_link *link)
ehc->i.action &= ~ATA_EH_PERDEV_MASK;
}
/* consider speeding down */
/* propagate timeout to host link */
if ((all_err_mask & AC_ERR_TIMEOUT) && !ata_is_host_link(link))
ap->link.eh_context.i.err_mask |= AC_ERR_TIMEOUT;
/* record error and consider speeding down */
dev = ehc->i.dev;
if (!dev && ata_link_max_devices(link) == 1 &&
ata_dev_enabled(link->device))
dev = link->device;
if (!dev && ((ata_link_max_devices(link) == 1 &&
ata_dev_enabled(link->device))))
dev = link->device;
if (dev)
ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask);
......@@ -1759,8 +1763,14 @@ void ata_eh_autopsy(struct ata_port *ap)
{
struct ata_link *link;
__ata_port_for_each_link(link, ap)
ata_port_for_each_link(link, ap)
ata_eh_link_autopsy(link);
/* Autopsy of fanout ports can affect host link autopsy.
* Perform host link autopsy last.
*/
if (ap->nr_pmp_links)
ata_eh_link_autopsy(&ap->link);
}
/**
......@@ -2157,13 +2167,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
if (ata_link_offline(link))
continue;
/* apply class override and convert UNKNOWN to NONE */
/* apply class override */
if (lflags & ATA_LFLAG_ASSUME_ATA)
classes[dev->devno] = ATA_DEV_ATA;
else if (lflags & ATA_LFLAG_ASSUME_SEMB)
classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */
else if (classes[dev->devno] == ATA_DEV_UNKNOWN)
classes[dev->devno] = ATA_DEV_NONE;
}
/* record current link speed */
......
......@@ -495,14 +495,12 @@ static void sata_pmp_quirks(struct ata_port *ap)
/* SError.N need a kick in the ass to get working */
link->flags |= ATA_LFLAG_HRST_TO_RESUME;
/* class code report is unreliable */
if (link->pmp < 5)
link->flags |= ATA_LFLAG_ASSUME_ATA;
/* The config device, which can be either at
* port 0 or 5, locks up on SRST.
/* Class code report is unreliable and SRST
* times out under certain configurations.
* Config device can be at port 0 or 5 and
* locks up on SRST.
*/
if (link->pmp == 0 || link->pmp == 5)
if (link->pmp <= 5)
link->flags |= ATA_LFLAG_NO_SRST |
ATA_LFLAG_ASSUME_ATA;
......
......@@ -872,7 +872,8 @@ int ata_scsi_slave_config(struct scsi_device *sdev)
ata_scsi_sdev_config(sdev);
sdev->manage_start_stop = 1;
if (dev->class == ATA_DEV_ATA)
sdev->manage_start_stop = 1;
if (dev)
ata_scsi_dev_config(sdev, dev);
......
......@@ -806,7 +806,10 @@ int ata_pci_init_one(struct pci_dev *pdev,
if (rc)
goto err_out;
if (!legacy_mode) {
if (!legacy_mode && pdev->irq) {
/* We may have no IRQ assigned in which case we can poll. This
shouldn't happen on a sane system but robustness is cheap
in this case */
rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler,
IRQF_SHARED, DRV_NAME, host);
if (rc)
......@@ -814,7 +817,7 @@ int ata_pci_init_one(struct pci_dev *pdev,
ata_port_desc(host->ports[0], "irq %d", pdev->irq);
ata_port_desc(host->ports[1], "irq %d", pdev->irq);
} else {
} else if (legacy_mode) {
if (!ata_port_is_dummy(host->ports[0])) {
rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
pi->port_ops->irq_handler,
......
......@@ -130,10 +130,11 @@ static struct ata_port_operations ixp4xx_port_ops = {
.port_start = ata_port_start,
};
static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
static void ixp4xx_setup_port(struct ata_port *ap,
struct ixp4xx_pata_data *data,
unsigned long raw_cs0, unsigned long raw_cs1)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned long raw_cmd = raw_cs0;
unsigned long raw_ctl = raw_cs1 + 0x06;
......
......@@ -215,8 +215,8 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
/* Flip back to 33Mhz for PIO */
if (adev->dma_mode >= XFER_UDMA_2)
iowrite8(ioread8(clock) & ~sel66, clock);
ata_bmdma_stop(qc);
pdc202xx_set_piomode(ap, adev);
}
/**
......@@ -233,6 +233,17 @@ static void pdc2026x_dev_config(struct ata_device *adev)
adev->max_sectors = 256;
}
static int pdc2026x_port_start(struct ata_port *ap)
{
void __iomem *bmdma = ap->ioaddr.bmdma_addr;
if (bmdma) {
/* Enable burst mode */
u8 burst = ioread8(bmdma + 0x1f);
iowrite8(burst | 0x01, bmdma + 0x1f);
}
return ata_sff_port_start(ap);
}
static struct scsi_host_template pdc202xx_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
......@@ -313,7 +324,7 @@ static struct ata_port_operations pdc2026x_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.port_start = pdc2026x_port_start,
};
static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
......
......@@ -270,7 +270,7 @@ static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
static void qs_error_handler(struct ata_port *ap)
{
qs_enter_reg_mode(ap);
ata_do_eh(ap, qs_prereset, ata_std_softreset, NULL,
ata_do_eh(ap, qs_prereset, NULL, sata_std_hardreset,
ata_std_postreset);
}
......
......@@ -832,16 +832,31 @@ static int sil24_qc_defer(struct ata_queued_cmd *qc)
struct ata_link *link = qc->dev->link;
struct ata_port *ap = link->ap;
u8 prot = qc->tf.protocol;
int is_atapi = (prot == ATA_PROT_ATAPI ||
prot == ATA_PROT_ATAPI_NODATA ||
prot == ATA_PROT_ATAPI_DMA);
/* ATAPI commands completing with CHECK_SENSE cause various
* weird problems if other commands are active. PMP DMA CS
* errata doesn't cover all and HSM violation occurs even with
* only one other device active. Always run an ATAPI command
* by itself.
*/
/*
* There is a bug in the chip:
* Port LRAM Causes the PRB/SGT Data to be Corrupted
* If the host issues a read request for LRAM and SActive registers
* while active commands are available in the port, PRB/SGT data in
* the LRAM can become corrupted. This issue applies only when
* reading from, but not writing to, the LRAM.
*
* Therefore, reading LRAM when there is no particular error [and
* other commands may be outstanding] is prohibited.
*
* To avoid this bug there are two situations where a command must run
* exclusive of any other commands on the port:
*
* - ATAPI commands which check the sense data
* - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF
* set.
*
*/
int is_excl = (prot == ATA_PROT_ATAPI ||
prot == ATA_PROT_ATAPI_NODATA ||
prot == ATA_PROT_ATAPI_DMA ||
(qc->flags & ATA_QCFLAG_RESULT_TF));
if (unlikely(ap->excl_link)) {
if (link == ap->excl_link) {
if (ap->nr_active_links)
......@@ -849,7 +864,7 @@ static int sil24_qc_defer(struct ata_queued_cmd *qc)
qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
} else
return ATA_DEFER_PORT;
} else if (unlikely(is_atapi)) {
} else if (unlikely(is_excl)) {
ap->excl_link = link;
if (ap->nr_active_links)
return ATA_DEFER_PORT;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册