提交 d2d746f8 编写于 作者: M Michael Chan 提交者: David S. Miller

[TG3]: Kill some less useful flags

Kill the TG3_FLAG_NO_{TX|RX}_PSEUDO_CSUM flags because they are not
very useful. This will free up some bits for new flags.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 7a43c995
......@@ -5828,10 +5828,14 @@ static int tg3_reset_hw(struct tg3 *tp)
GRC_MODE_NO_TX_PHDR_CSUM |
GRC_MODE_NO_RX_PHDR_CSUM);
tp->grc_mode |= GRC_MODE_HOST_SENDBDS;
if (tp->tg3_flags & TG3_FLAG_NO_TX_PSEUDO_CSUM)
tp->grc_mode |= GRC_MODE_NO_TX_PHDR_CSUM;
if (tp->tg3_flags & TG3_FLAG_NO_RX_PSEUDO_CSUM)
tp->grc_mode |= GRC_MODE_NO_RX_PHDR_CSUM;
/* Pseudo-header checksum is done by hardware logic and not
* the offload processers, so make the chip do the pseudo-
* header checksums on receive. For transmit it is more
* convenient to do the pseudo-header checksum in software
* as Linux does that on transmit for us in all cases.
*/
tp->grc_mode |= GRC_MODE_NO_TX_PHDR_CSUM;
tw32(GRC_MODE,
tp->grc_mode |
......@@ -10303,15 +10307,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
if (tp->pci_chip_rev_id == CHIPREV_ID_5700_B0)
tp->tg3_flags |= TG3_FLAG_BROKEN_CHECKSUMS;
/* Pseudo-header checksum is done by hardware logic and not
* the offload processers, so make the chip do the pseudo-
* header checksums on receive. For transmit it is more
* convenient to do the pseudo-header checksum in software
* as Linux does that on transmit for us in all cases.
*/
tp->tg3_flags |= TG3_FLAG_NO_TX_PSEUDO_CSUM;
tp->tg3_flags &= ~TG3_FLAG_NO_RX_PSEUDO_CSUM;
/* Derive initial jumbo mode from MTU assigned in
* ether_setup() via the alloc_etherdev() call
*/
......
......@@ -2171,8 +2171,6 @@ struct tg3 {
#define TG3_FLAG_PCIX_MODE 0x00020000
#define TG3_FLAG_PCI_HIGH_SPEED 0x00040000
#define TG3_FLAG_PCI_32BIT 0x00080000
#define TG3_FLAG_NO_TX_PSEUDO_CSUM 0x00100000
#define TG3_FLAG_NO_RX_PSEUDO_CSUM 0x00200000
#define TG3_FLAG_SERDES_WOL_CAP 0x00400000
#define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000
#define TG3_FLAG_10_100_ONLY 0x01000000
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册