[PATCH] therm_adt746x: show correct sensor locations

This patch shows the correct locations of the heat sensors present in iBook
and PowerBooks G4, instead of displaying them as being on CPU and GPU
(which is not always the case).
Signed-off-by: NColin Leroy <colin@colino.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/macintosh/therm_adt746x.c

@@ -39,15 +39,16 @@
 #define MANUAL_MASK  0xe0
 #define AUTO_MASK    0x20
 
-static u8 TEMP_REG[3]    = {0x26, 0x25, 0x27}; /* local, cpu, gpu */
-static u8 LIMIT_REG[3]   = {0x6b, 0x6a, 0x6c}; /* local, cpu, gpu */
+static u8 TEMP_REG[3]    = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */
+static u8 LIMIT_REG[3]   = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */
 static u8 MANUAL_MODE[2] = {0x5c, 0x5d};       
 static u8 REM_CONTROL[2] = {0x00, 0x40};
 static u8 FAN_SPEED[2]   = {0x28, 0x2a};
 static u8 FAN_SPD_SET[2] = {0x30, 0x31};
 
-static u8 default_limits_local[3] = {70, 50, 70};    /* local, cpu, gpu */
-static u8 default_limits_chip[3] = {80, 65, 80};    /* local, cpu, gpu */
+static u8 default_limits_local[3] = {70, 50, 70};    /* local, sensor1, sensor2 */
+static u8 default_limits_chip[3] = {80, 65, 80};    /* local, sensor1, sensor2 */
+static char *sensor_location[3] = {NULL, NULL, NULL};
 
 static int limit_adjust = 0;
 static int fan_speed = -1;
@@ -58,7 +59,7 @@ MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and "
 MODULE_LICENSE("GPL");
 
 module_param(limit_adjust, int, 0644);
-MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 cpu, 70 gpu) "
+MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 sensor1, 70 sensor2) "
 		 "by N degrees.");
 
 module_param(fan_speed, int, 0644);
@@ -213,10 +214,10 @@ static void write_fan_speed(struct thermostat *th, int speed, int fan)
 	if (th->last_speed[fan] != speed) {
 		if (speed == -1)
 			printk(KERN_DEBUG "adt746x: Setting speed to automatic "
-				"for %s fan.\n", fan?"GPU":"CPU");
+				"for %s fan.\n", sensor_location[fan+1]);
 		else
 			printk(KERN_DEBUG "adt746x: Setting speed to %d "
-				"for %s fan.\n", speed, fan?"GPU":"CPU");
+				"for %s fan.\n", speed, sensor_location[fan+1]);
 	} else
 		return;
 	
@@ -300,11 +301,11 @@ static void update_fans_speed (struct thermostat *th)
 			printk(KERN_DEBUG "adt746x: setting fans speed to %d "
 					 "(limit exceeded by %d on %s) \n",
 					new_speed, var,
-					fan_number?"GPU/pwr":"CPU");
+					sensor_location[fan_number+1]);
 			write_both_fan_speed(th, new_speed);
 			th->last_var[fan_number] = var;
 		} else if (var < -2) {
-			/* don't stop fan if GPU/power is cold and CPU is not
+			/* don't stop fan if sensor2 is cold and sensor1 is not
 			 * so cold (lastvar >= -1) */
 			if (i == 2 && lastvar < -1) {
 				if (th->last_speed[fan_number] != 0)
@@ -318,7 +319,7 @@ static void update_fans_speed (struct thermostat *th)
 
 		if (started)
 			return; /* we don't want to re-stop the fan
-				* if CPU is heating and GPU/power is not */
+				* if sensor1 is heating and sensor2 is not */
 	}
 }
 
@@ -353,7 +354,7 @@ static int monitor_task(void *arg)
 
 static void set_limit(struct thermostat *th, int i)
 {
-		/* Set CPU limit higher to avoid powerdowns */ 
+		/* Set sensor1 limit higher to avoid powerdowns */
 		th->limits[i] = default_limits_chip[i] + limit_adjust;
 		write_reg(th, LIMIT_REG[i], th->limits[i]);
 		
@@ -461,6 +462,12 @@ static ssize_t show_##name(struct device *dev, char *buf)	\
 	return sprintf(buf, "%d\n", data);			\
 }
 
+#define BUILD_SHOW_FUNC_STR(name, data)				\
+static ssize_t show_##name(struct device *dev, char *buf)	\
+{								\
+	return sprintf(buf, "%s\n", data);			\
+}
+
 #define BUILD_SHOW_FUNC_FAN(name, data)				\
 static ssize_t show_##name(struct device *dev, char *buf)       \
 {								\
@@ -476,7 +483,7 @@ static ssize_t store_##name(struct device *dev, const char *buf, size_t n) \
 	int val;						\
 	int i;							\
 	val = simple_strtol(buf, NULL, 10);			\
-	printk(KERN_INFO "Adjusting limits by %d°C\n", val);	\
+	printk(KERN_INFO "Adjusting limits by %d degrees\n", val);	\
 	limit_adjust = val;					\
 	for (i=0; i < 3; i++)					\
 		set_limit(thermostat, i);			\
@@ -495,35 +502,41 @@ static ssize_t store_##name(struct device *dev, const char *buf, size_t n) \
 	return n;						\
 }
 
-BUILD_SHOW_FUNC_INT(cpu_temperature,	 (read_reg(thermostat, TEMP_REG[1])))
-BUILD_SHOW_FUNC_INT(gpu_temperature,	 (read_reg(thermostat, TEMP_REG[2])))
-BUILD_SHOW_FUNC_INT(cpu_limit,		 thermostat->limits[1])
-BUILD_SHOW_FUNC_INT(gpu_limit,		 thermostat->limits[2])
+BUILD_SHOW_FUNC_INT(sensor1_temperature,	 (read_reg(thermostat, TEMP_REG[1])))
+BUILD_SHOW_FUNC_INT(sensor2_temperature,	 (read_reg(thermostat, TEMP_REG[2])))
+BUILD_SHOW_FUNC_INT(sensor1_limit,		 thermostat->limits[1])
+BUILD_SHOW_FUNC_INT(sensor2_limit,		 thermostat->limits[2])
+BUILD_SHOW_FUNC_STR(sensor1_location,		 sensor_location[1])
+BUILD_SHOW_FUNC_STR(sensor2_location,		 sensor_location[2])
 
 BUILD_SHOW_FUNC_INT(specified_fan_speed, fan_speed)
-BUILD_SHOW_FUNC_FAN(cpu_fan_speed,	 0)
-BUILD_SHOW_FUNC_FAN(gpu_fan_speed,	 1)
+BUILD_SHOW_FUNC_FAN(sensor1_fan_speed,	 0)
+BUILD_SHOW_FUNC_FAN(sensor2_fan_speed,	 1)
 
 BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed)
 BUILD_SHOW_FUNC_INT(limit_adjust,	 limit_adjust)
 BUILD_STORE_FUNC_DEG(limit_adjust,	 thermostat)
 		
-static DEVICE_ATTR(cpu_temperature,	S_IRUGO,
-		   show_cpu_temperature,NULL);
-static DEVICE_ATTR(gpu_temperature,	S_IRUGO,
-		   show_gpu_temperature,NULL);
-static DEVICE_ATTR(cpu_limit,		S_IRUGO,
-		   show_cpu_limit,	NULL);
-static DEVICE_ATTR(gpu_limit,		S_IRUGO,
-		   show_gpu_limit,	NULL);
+static DEVICE_ATTR(sensor1_temperature,	S_IRUGO,
+		   show_sensor1_temperature,NULL);
+static DEVICE_ATTR(sensor2_temperature,	S_IRUGO,
+		   show_sensor2_temperature,NULL);
+static DEVICE_ATTR(sensor1_limit, S_IRUGO,
+		   show_sensor1_limit,	NULL);
+static DEVICE_ATTR(sensor2_limit, S_IRUGO,
+		   show_sensor2_limit,	NULL);
+static DEVICE_ATTR(sensor1_location, S_IRUGO,
+		   show_sensor1_location, NULL);
+static DEVICE_ATTR(sensor2_location, S_IRUGO,
+		   show_sensor2_location, NULL);
 
 static DEVICE_ATTR(specified_fan_speed,	S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
 		   show_specified_fan_speed,store_specified_fan_speed);
 
-static DEVICE_ATTR(cpu_fan_speed,	S_IRUGO,
-		   show_cpu_fan_speed,	NULL);
-static DEVICE_ATTR(gpu_fan_speed,	S_IRUGO,
-		   show_gpu_fan_speed,	NULL);
+static DEVICE_ATTR(sensor1_fan_speed,	S_IRUGO,
+		   show_sensor1_fan_speed,	NULL);
+static DEVICE_ATTR(sensor2_fan_speed,	S_IRUGO,
+		   show_sensor2_fan_speed,	NULL);
 
 static DEVICE_ATTR(limit_adjust,	S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
 		   show_limit_adjust,	store_limit_adjust);
@@ -534,6 +547,7 @@ thermostat_init(void)
 {
 	struct device_node* np;
 	u32 *prop;
+	int i = 0, offset = 0;
 	
 	np = of_find_node_by_name(NULL, "fan");
 	if (!np)
@@ -569,6 +583,23 @@ thermostat_init(void)
 			 "limit_adjust: %d, fan_speed: %d\n",
 			 therm_bus, therm_address, limit_adjust, fan_speed);
 
+	if (get_property(np, "hwsensor-location", NULL)) {
+		for (i = 0; i < 3; i++) {
+			sensor_location[i] = get_property(np,
+					"hwsensor-location", NULL) + offset;
+
+			if (sensor_location[i] == NULL)
+				sensor_location[i] = "";
+
+			printk(KERN_INFO "sensor %d: %s\n", i, sensor_location[i]);
+			offset += strlen(sensor_location[i]) + 1;
+		}
+	} else {
+		sensor_location[0] = "?";
+		sensor_location[1] = "?";
+		sensor_location[2] = "?";
+	}
+
 	of_dev = of_platform_device_create(np, "temperatures");
 	
 	if (of_dev == NULL) {
@@ -576,15 +607,17 @@ thermostat_init(void)
 		return -ENODEV;
 	}
 	
-	device_create_file(&of_dev->dev, &dev_attr_cpu_temperature);
-	device_create_file(&of_dev->dev, &dev_attr_gpu_temperature);
-	device_create_file(&of_dev->dev, &dev_attr_cpu_limit);
-	device_create_file(&of_dev->dev, &dev_attr_gpu_limit);
+	device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature);
+	device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature);
+	device_create_file(&of_dev->dev, &dev_attr_sensor1_limit);
+	device_create_file(&of_dev->dev, &dev_attr_sensor2_limit);
+	device_create_file(&of_dev->dev, &dev_attr_sensor1_location);
+	device_create_file(&of_dev->dev, &dev_attr_sensor2_location);
 	device_create_file(&of_dev->dev, &dev_attr_limit_adjust);
 	device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed);
-	device_create_file(&of_dev->dev, &dev_attr_cpu_fan_speed);
+	device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
 	if(therm_type == ADT7460)
-		device_create_file(&of_dev->dev, &dev_attr_gpu_fan_speed);
+		device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
 
 #ifndef CONFIG_I2C_KEYWEST
 	request_module("i2c-keywest");
@@ -597,17 +630,19 @@ static void __exit
 thermostat_exit(void)
 {
 	if (of_dev) {
-		device_remove_file(&of_dev->dev, &dev_attr_cpu_temperature);
-		device_remove_file(&of_dev->dev, &dev_attr_gpu_temperature);
-		device_remove_file(&of_dev->dev, &dev_attr_cpu_limit);
-		device_remove_file(&of_dev->dev, &dev_attr_gpu_limit);
+		device_remove_file(&of_dev->dev, &dev_attr_sensor1_temperature);
+		device_remove_file(&of_dev->dev, &dev_attr_sensor2_temperature);
+		device_remove_file(&of_dev->dev, &dev_attr_sensor1_limit);
+		device_remove_file(&of_dev->dev, &dev_attr_sensor2_limit);
+		device_remove_file(&of_dev->dev, &dev_attr_sensor1_location);
+		device_remove_file(&of_dev->dev, &dev_attr_sensor2_location);
 		device_remove_file(&of_dev->dev, &dev_attr_limit_adjust);
 		device_remove_file(&of_dev->dev, &dev_attr_specified_fan_speed);
-		device_remove_file(&of_dev->dev, &dev_attr_cpu_fan_speed);
+		device_remove_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
 
 		if(therm_type == ADT7460)
 			device_remove_file(&of_dev->dev,
-					   &dev_attr_gpu_fan_speed);
+					   &dev_attr_sensor2_fan_speed);
 
 		of_device_unregister(of_dev);
 	}