Merge branches 'arm', 'at91', 'ep93xx', 'iop', 'ks8695', 'misc', 'mxc',...

Merge branches 'arm', 'at91', 'ep93xx', 'iop', 'ks8695', 'misc', 'mxc', 'ns9x', 'orion', 'pxa', 'sa1100', 's3c' and 'sparsemem' into devel

MAINTAINERS

@@ -480,6 +480,12 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/GUMSTIX MACHINE SUPPORT
+P:	Steve Sakoman
+M:	sakoman@gmail.com
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S:	Maintained
+
 ARM/HP JORNADA 7XX MACHINE SUPPORT
 P:      Kristoffer Ericson
 M:      kristoffer.ericson@gmail.com

arch/arm/Kconfig

@@ -255,6 +255,7 @@ config ARCH_EP93XX
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -377,15 +378,17 @@ config ARCH_MXC
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
-config ARCH_ORION
+config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
 	select PCI
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
 	help
-	  Support for Marvell Orion System on Chip family.
+	  Support for the following Marvell Orion 5x series SoCs:
+	  Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
@@ -422,10 +425,15 @@ config ARCH_SA1100
 	bool "SA1100-based"
 	select ISA
 	select ARCH_DISCONTIGMEM_ENABLE
+	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_SELECT_MEMORY_MODEL
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
 	select HAVE_IDE
+	select HAVE_GPIO_LIB
 	help
 	  Support for StrongARM 11x0 based boards.
 
@@ -516,7 +524,7 @@ source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
-source "arch/arm/mach-orion/Kconfig"
+source "arch/arm/mach-orion5x/Kconfig"
 
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
@@ -563,6 +571,9 @@ config ARCH_ACORN
 config PLAT_IOP
 	bool
 
+config PLAT_ORION
+	bool
+
 source arch/arm/mm/Kconfig
 
 config IWMMXT
@@ -774,6 +785,12 @@ config ARCH_DISCONTIGMEM_ENABLE
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/vm/numa> for more.
 
+config ARCH_SPARSEMEM_ENABLE
+	bool
+
+config ARCH_SELECT_MEMORY_MODEL
+	bool
+
 config NODES_SHIFT
 	int
 	default "4" if ARCH_LH7A40X

arch/arm/Makefile

@@ -134,12 +134,11 @@ endif
  machine-$(CONFIG_ARCH_PNX4008)	   := pnx4008
  machine-$(CONFIG_ARCH_NETX)	   := netx
  machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
- textofs-$(CONFIG_ARCH_NS9XXX)	   := 0x00108000
  machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
   incdir-$(CONFIG_ARCH_MXC)	   := mxc
  machine-$(CONFIG_ARCH_MX3)	   := mx3
- machine-$(CONFIG_ARCH_ORION)	   := orion
+ machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
  machine-$(CONFIG_ARCH_MSM7X00A)   := msm
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
@@ -185,6 +184,7 @@ core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
 # If we have a common platform directory, then include it in the build.
 core-$(CONFIG_PLAT_IOP)		+= arch/arm/plat-iop/
+core-$(CONFIG_PLAT_ORION)		+= arch/arm/plat-orion/
 core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
 core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
 core-$(CONFIG_ARCH_MXC)		+= arch/arm/plat-mxc/

arch/arm/boot/Makefile

@@ -61,9 +61,15 @@ endif
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-		   -C none -a $(ZRELADDR) -e $(ZRELADDR) \
+		   -C none -a $(LOADADDR) -e $(LOADADDR) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
+ifeq ($(CONFIG_ZBOOT_ROM),y)
+$(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
+else
+$(obj)/uImage: LOADADDR=$(ZRELADDR)
+endif
+
 $(obj)/uImage:	$(obj)/zImage FORCE
 	$(call if_changed,uimage)
 	@echo '  Image $@ is ready'

arch/arm/common/scoop.c

@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/hardware/scoop.h>
 
 /* PCMCIA to Scoop linkage
@@ -30,10 +31,9 @@
 struct scoop_pcmcia_config *platform_scoop_config;
 EXPORT_SYMBOL(platform_scoop_config);
 
-#define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr)))
-
 struct  scoop_dev {
-	void  *base;
+	void __iomem *base;
+	struct gpio_chip gpio;
 	spinlock_t scoop_lock;
 	unsigned short suspend_clr;
 	unsigned short suspend_set;
@@ -44,13 +44,84 @@ void reset_scoop(struct device *dev)
 {
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
 
-	SCOOP_REG(sdev->base,SCOOP_MCR) = 0x0100;  // 00
-	SCOOP_REG(sdev->base,SCOOP_CDR) = 0x0000;  // 04
-	SCOOP_REG(sdev->base,SCOOP_CCR) = 0x0000;  // 10
-	SCOOP_REG(sdev->base,SCOOP_IMR) = 0x0000;  // 18
-	SCOOP_REG(sdev->base,SCOOP_IRM) = 0x00FF;  // 14
-	SCOOP_REG(sdev->base,SCOOP_ISR) = 0x0000;  // 1C
-	SCOOP_REG(sdev->base,SCOOP_IRM) = 0x0000;
+	iowrite16(0x0100, sdev->base + SCOOP_MCR);  // 00
+	iowrite16(0x0000, sdev->base + SCOOP_CDR);  // 04
+	iowrite16(0x0000, sdev->base + SCOOP_CCR);  // 10
+	iowrite16(0x0000, sdev->base + SCOOP_IMR);  // 18
+	iowrite16(0x00FF, sdev->base + SCOOP_IRM);  // 14
+	iowrite16(0x0000, sdev->base + SCOOP_ISR);  // 1C
+	iowrite16(0x0000, sdev->base + SCOOP_IRM);
+}
+
+static void __scoop_gpio_set(struct scoop_dev *sdev,
+			unsigned offset, int value)
+{
+	unsigned short gpwr;
+
+	gpwr = ioread16(sdev->base + SCOOP_GPWR);
+	if (value)
+		gpwr |= 1 << (offset + 1);
+	else
+		gpwr &= ~(1 << (offset + 1));
+	iowrite16(gpwr, sdev->base + SCOOP_GPWR);
+}
+
+static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdev->scoop_lock, flags);
+
+	__scoop_gpio_set(sdev, offset, value);
+
+	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
+}
+
+static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+
+	/* XXX: I'm usure,  but it seems so */
+	return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
+}
+
+static int scoop_gpio_direction_input(struct gpio_chip *chip,
+			unsigned offset)
+{
+	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	unsigned long flags;
+	unsigned short gpcr;
+
+	spin_lock_irqsave(&sdev->scoop_lock, flags);
+
+	gpcr = ioread16(sdev->base + SCOOP_GPCR);
+	gpcr &= ~(1 << (offset + 1));
+	iowrite16(gpcr, sdev->base + SCOOP_GPCR);
+
+	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
+
+	return 0;
+}
+
+static int scoop_gpio_direction_output(struct gpio_chip *chip,
+			unsigned offset, int value)
+{
+	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	unsigned long flags;
+	unsigned short gpcr;
+
+	spin_lock_irqsave(&sdev->scoop_lock, flags);
+
+	__scoop_gpio_set(sdev, offset, value);
+
+	gpcr = ioread16(sdev->base + SCOOP_GPCR);
+	gpcr |= 1 << (offset + 1);
+	iowrite16(gpcr, sdev->base + SCOOP_GPCR);
+
+	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
+
+	return 0;
 }
 
 unsigned short set_scoop_gpio(struct device *dev, unsigned short bit)
@@ -60,8 +131,8 @@ unsigned short set_scoop_gpio(struct device *dev, unsigned short bit)
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
 
 	spin_lock_irqsave(&sdev->scoop_lock, flag);
-	gpio_bit = SCOOP_REG(sdev->base, SCOOP_GPWR) | bit;
-	SCOOP_REG(sdev->base, SCOOP_GPWR) = gpio_bit;
+	gpio_bit = ioread16(sdev->base + SCOOP_GPWR) | bit;
+	iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
 	spin_unlock_irqrestore(&sdev->scoop_lock, flag);
 
 	return gpio_bit;
@@ -74,8 +145,8 @@ unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit)
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
 
 	spin_lock_irqsave(&sdev->scoop_lock, flag);
-	gpio_bit = SCOOP_REG(sdev->base, SCOOP_GPWR) & ~bit;
-	SCOOP_REG(sdev->base,SCOOP_GPWR) = gpio_bit;
+	gpio_bit = ioread16(sdev->base + SCOOP_GPWR) & ~bit;
+	iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
 	spin_unlock_irqrestore(&sdev->scoop_lock, flag);
 
 	return gpio_bit;
@@ -87,13 +158,13 @@ EXPORT_SYMBOL(reset_scoop_gpio);
 unsigned short read_scoop_reg(struct device *dev, unsigned short reg)
 {
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
-	return SCOOP_REG(sdev->base,reg);
+	return ioread16(sdev->base + reg);
 }
 
 void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data)
 {
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
-	SCOOP_REG(sdev->base,reg)=data;
+	iowrite16(data, sdev->base + reg);
 }
 
 EXPORT_SYMBOL(reset_scoop);
@@ -104,9 +175,9 @@ static void check_scoop_reg(struct scoop_dev *sdev)
 {
 	unsigned short mcr;
 
-	mcr = SCOOP_REG(sdev->base, SCOOP_MCR);
+	mcr = ioread16(sdev->base + SCOOP_MCR);
 	if ((mcr & 0x100) == 0)
-		SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101;
+		iowrite16(0x0101, sdev->base + SCOOP_MCR);
 }
 
 #ifdef CONFIG_PM
@@ -115,8 +186,8 @@ static int scoop_suspend(struct platform_device *dev, pm_message_t state)
 	struct scoop_dev *sdev = platform_get_drvdata(dev);
 
 	check_scoop_reg(sdev);
-	sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
-	SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
+	sdev->scoop_gpwr = ioread16(sdev->base + SCOOP_GPWR);
+	iowrite16((sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set, sdev->base + SCOOP_GPWR);
 
 	return 0;
 }
@@ -126,7 +197,7 @@ static int scoop_resume(struct platform_device *dev)
 	struct scoop_dev *sdev = platform_get_drvdata(dev);
 
 	check_scoop_reg(sdev);
-	SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
+	iowrite16(sdev->scoop_gpwr, sdev->base + SCOOP_GPWR);
 
 	return 0;
 }
@@ -135,11 +206,13 @@ static int scoop_resume(struct platform_device *dev)
 #define scoop_resume	NULL
 #endif
 
-int __init scoop_probe(struct platform_device *pdev)
+static int __devinit scoop_probe(struct platform_device *pdev)
 {
 	struct scoop_dev *devptr;
 	struct scoop_config *inf;
 	struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int ret;
+	int temp;
 
 	if (!mem)
 		return -EINVAL;
@@ -154,40 +227,78 @@ int __init scoop_probe(struct platform_device *pdev)
 	devptr->base = ioremap(mem->start, mem->end - mem->start + 1);
 
 	if (!devptr->base) {
-		kfree(devptr);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto err_ioremap;
 	}
 
 	platform_set_drvdata(pdev, devptr);
 
-	printk("Sharp Scoop Device found at 0x%08x -> 0x%08x\n",(unsigned int)mem->start,(unsigned int)devptr->base);
+	printk("Sharp Scoop Device found at 0x%08x -> 0x%8p\n",(unsigned int)mem->start, devptr->base);
 
-	SCOOP_REG(devptr->base, SCOOP_MCR) = 0x0140;
+	iowrite16(0x0140, devptr->base + SCOOP_MCR);
 	reset_scoop(&pdev->dev);
-	SCOOP_REG(devptr->base, SCOOP_CPR) = 0x0000;
-	SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff;
-	SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff;
+	iowrite16(0x0000, devptr->base + SCOOP_CPR);
+	iowrite16(inf->io_dir & 0xffff, devptr->base + SCOOP_GPCR);
+	iowrite16(inf->io_out & 0xffff, devptr->base + SCOOP_GPWR);
 
 	devptr->suspend_clr = inf->suspend_clr;
 	devptr->suspend_set = inf->suspend_set;
 
+	devptr->gpio.base = -1;
+
+	if (inf->gpio_base != 0) {
+		devptr->gpio.label = pdev->dev.bus_id;
+		devptr->gpio.base = inf->gpio_base;
+		devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */
+		devptr->gpio.set = scoop_gpio_set;
+		devptr->gpio.get = scoop_gpio_get;
+		devptr->gpio.direction_input = scoop_gpio_direction_input;
+		devptr->gpio.direction_output = scoop_gpio_direction_output;
+
+		ret = gpiochip_add(&devptr->gpio);
+		if (ret)
+			goto err_gpio;
+	}
+
 	return 0;
+
+	if (devptr->gpio.base != -1)
+		temp = gpiochip_remove(&devptr->gpio);
+err_gpio:
+	platform_set_drvdata(pdev, NULL);
+err_ioremap:
+	iounmap(devptr->base);
+	kfree(devptr);
+
+	return ret;
 }
 
-static int scoop_remove(struct platform_device *pdev)
+static int __devexit scoop_remove(struct platform_device *pdev)
 {
 	struct scoop_dev *sdev = platform_get_drvdata(pdev);
-	if (sdev) {
-		iounmap(sdev->base);
-		kfree(sdev);
-		platform_set_drvdata(pdev, NULL);
+	int ret;
+
+	if (!sdev)
+		return -EINVAL;
+
+	if (sdev->gpio.base != -1) {
+		ret = gpiochip_remove(&sdev->gpio);
+		if (ret) {
+			dev_err(&pdev->dev, "Can't remove gpio chip: %d\n", ret);
+			return ret;
+		}
 	}
+
+	platform_set_drvdata(pdev, NULL);
+	iounmap(sdev->base);
+	kfree(sdev);
+
 	return 0;
 }
 
 static struct platform_driver scoop_driver = {
 	.probe		= scoop_probe,
-	.remove 	= scoop_remove,
+	.remove		= __devexit_p(scoop_remove),
 	.suspend	= scoop_suspend,
 	.resume		= scoop_resume,
 	.driver		= {
@@ -195,7 +306,7 @@ static struct platform_driver scoop_driver = {
 	},
 };
 
-int __init scoop_init(void)
+static int __init scoop_init(void)
 {
 	return platform_driver_register(&scoop_driver);
 }

arch/arm/configs/at91rm9200dk_defconfig

@@ -620,14 +620,14 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Algorithms
 #
-# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_PCA_ISA is not set

arch/arm/configs/at91rm9200ek_defconfig

@@ -594,14 +594,14 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Algorithms
 #
-# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_PCA_ISA is not set

arch/arm/configs/ateb9200_defconfig

@@ -714,7 +714,7 @@ CONFIG_I2C_ALGOPCA=m
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=m
+CONFIG_I2C_GPIO=m
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_PCA_ISA is not set

arch/arm/configs/kafa_defconfig

@@ -587,14 +587,14 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Algorithms
 #
-# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_PCA_ISA is not set

arch/arm/configs/orion_defconfig → arch/arm/configs/orion5x_defconfig

@@ -140,7 +140,7 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_MXC is not set
-CONFIG_ARCH_ORION=y
+CONFIG_ARCH_ORION5X=y
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set

arch/arm/configs/picotux200_defconfig

@@ -727,14 +727,14 @@ CONFIG_I2C_CHARDEV=m
 #
 # I2C Algorithms
 #
-# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=m
+CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set

arch/arm/kernel/calls.S

@@ -359,9 +359,11 @@
 		CALL(sys_kexec_load)
 		CALL(sys_utimensat)
 		CALL(sys_signalfd)
-/* 350 */	CALL(sys_ni_syscall)
+/* 350 */	CALL(sys_timerfd_create)
 		CALL(sys_eventfd)
 		CALL(sys_fallocate)
+		CALL(sys_timerfd_settime)
+		CALL(sys_timerfd_gettime)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/kernel/entry-armv.S

@@ -209,14 +209,12 @@ __irq_svc:
 
 	irq_handler
 #ifdef CONFIG_PREEMPT
+	str	r8, [tsk, #TI_PREEMPT]		@ restore preempt count
 	ldr	r0, [tsk, #TI_FLAGS]		@ get flags
+	teq	r8, #0				@ if preempt count != 0
+	movne	r0, #0				@ force flags to 0
 	tst	r0, #_TIF_NEED_RESCHED
 	blne	svc_preempt
-preempt_return:
-	ldr	r0, [tsk, #TI_PREEMPT]		@ read preempt value
-	str	r8, [tsk, #TI_PREEMPT]		@ restore preempt count
-	teq	r0, r7
-	strne	r0, [r0, -r0]			@ bug()
 #endif
 	ldr	r0, [sp, #S_PSR]		@ irqs are already disabled
 	msr	spsr_cxsf, r0
@@ -230,19 +228,11 @@ preempt_return:
 
 #ifdef CONFIG_PREEMPT
 svc_preempt:
-	teq	r8, #0				@ was preempt count = 0
-	ldreq	r6, .LCirq_stat
-	movne	pc, lr				@ no
-	ldr	r0, [r6, #4]			@ local_irq_count
-	ldr	r1, [r6, #8]			@ local_bh_count
-	adds	r0, r0, r1
-	movne	pc, lr
-	mov	r7, #0				@ preempt_schedule_irq
-	str	r7, [tsk, #TI_PREEMPT]		@ expects preempt_count == 0
+	mov	r8, lr
 1:	bl	preempt_schedule_irq		@ irq en/disable is done inside
 	ldr	r0, [tsk, #TI_FLAGS]		@ get new tasks TI_FLAGS
 	tst	r0, #_TIF_NEED_RESCHED
-	beq	preempt_return			@ go again
+	moveq	pc, r8				@ go again
 	b	1b
 #endif
 
@@ -333,10 +323,6 @@ __pabt_svc:
 #endif
 .LCfp:
 	.word	fp_enter
-#ifdef CONFIG_PREEMPT
-.LCirq_stat:
-	.word	irq_stat
-#endif
 
 /*
  * User mode handlers

arch/arm/kernel/head-common.S

@@ -75,8 +75,13 @@ __error_p:
 #ifdef CONFIG_DEBUG_LL
 	adr	r0, str_p1
 	bl	printascii
+	mov	r0, r9
+	bl	printhex8
+	adr	r0, str_p2
+	bl	printascii
 	b	__error
-str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant.\n"
+str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant (0x"
+str_p2:	.asciz	").\n"
 	.align
 #endif
 

arch/arm/mach-at91/Kconfig

@@ -12,18 +12,28 @@ config ARCH_AT91RM9200
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91X40
 	bool "AT91x40"
@@ -109,6 +119,13 @@ config MACH_KAFA
 	help
 	  Select this if you are using Sperry-Sun's KAFA board.
 
+config MACH_ECBAT91
+	bool "emQbit ECB_AT91 SBC"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using emQbit's ECB_AT91 board.
+	  <http://wiki.emqbit.com/free-ecb-at91>
+
 endif
 
 # ----------------------------------------------------------
@@ -133,6 +150,20 @@ config MACH_AT91SAM9260EK
 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 
+config MACH_CAM60
+	bool "KwikByte KB9260 (CAM60) board"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
+	  <http://www.kwikbyte.com/KB9260.html>
+
+config MACH_SAM9_L9260
+	bool "Olimex SAM9-L9260 board"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
+	  <http://www.olimex.com/dev/sam9-L9260.html>
+
 endif
 
 # ----------------------------------------------------------
@@ -216,7 +247,7 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_SAM9_L9260 || MACH_ECBAT91)
 	help
 	  Enable support for the DataFlash card.
 

arch/arm/mach-at91/Makefile

@@ -29,9 +29,12 @@ obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
 obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
 obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
 obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
+obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
+obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o
+obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o

arch/arm/mach-at91/at91cap9.c

@@ -13,12 +13,14 @@
  */
 
 #include <linux/module.h>
+#include <linux/pm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/arch/at91cap9.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -288,6 +290,12 @@ static void at91cap9_reset(void)
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
+static void at91cap9_poweroff(void)
+{
+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
+
 /* --------------------------------------------------------------------
  *  AT91CAP9 processor initialization
  * -------------------------------------------------------------------- */
@@ -298,6 +306,7 @@ void __init at91cap9_initialize(unsigned long main_clock)
 	iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
 
 	at91_arch_reset = at91cap9_reset;
+	pm_power_off = at91cap9_poweroff;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
 
 	/* Init clock subsystem */

arch/arm/mach-at91/board-cap9adk.c

@@ -45,7 +45,7 @@
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9_smc.h>
 
 #include "generic.h"
 

arch/arm/mach-clps711x/Kconfig

@@ -31,6 +31,8 @@ config ARCH_EDB7211
 	bool "EDB7211"
 	select ISA
 	select ARCH_DISCONTIGMEM_ENABLE
+	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_SELECT_MEMORY_MODEL
 	help
 	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
 	  evaluation board.

arch/arm/mach-ep93xx/Makefile

 #
 # Makefile for the linux kernel.
 #
-obj-y			:= core.o clock.o
+obj-y			:= core.o clock.o gpio.o
 obj-m			:=
 obj-n			:=
 obj-			:=

arch/arm/mach-ns9xxx/Makefile.boot

-zreladdr-y := 0x108000
+zreladdr-y := 0x8000
 params_phys-y := 0x100