提交 d1785326 编写于 作者: U Ulf Hansson

mmc: sdhci-esdhc-imx: Convert to mmc_send_tuning()

Instead of having a local function taking care of sending the tuning
command, let's use the common mmc_send_tuning() API provided by the mmc
core. In this way the request will be handled as any other request by
sdhci core.

As an effect of this change, the pm_runtime_get_sync() call at
esdhc_prepare_tuning() isn't needed any more.

This patch will also introduce another change in behavior, since before
the response pattern to the tuning command wasn't verified by
sdhci-esdhc-imx. The mmc_send_tuning() does that.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Tested-by: NDong Aisheng <b29396@freescale.com>
Acked-by: NDong Aisheng <b29396@freescale.com>
上级 fe5afb13
......@@ -65,8 +65,6 @@
/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
#define ESDHC_TUNING_START_TAP 0x1
#define ESDHC_TUNING_BLOCK_PATTERN_LEN 64
/* pinctrl state */
#define ESDHC_PINCTRL_STATE_100MHZ "state_100mhz"
#define ESDHC_PINCTRL_STATE_200MHZ "state_200mhz"
......@@ -692,8 +690,6 @@ static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
/* FIXME: delay a bit for card to be ready for next tuning due to errors */
mdelay(1);
/* This is balanced by the runtime put in sdhci_tasklet_finish */
pm_runtime_get_sync(host->mmc->parent);
reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL |
ESDHC_MIX_CTRL_FBCLK_SEL;
......@@ -704,54 +700,6 @@ static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
val, readl(host->ioaddr + ESDHC_TUNE_CTRL_STATUS));
}
static void esdhc_request_done(struct mmc_request *mrq)
{
complete(&mrq->completion);
}
static int esdhc_send_tuning_cmd(struct sdhci_host *host, u32 opcode,
struct scatterlist *sg)
{
struct mmc_command cmd = {0};
struct mmc_request mrq = {NULL};
struct mmc_data data = {0};
cmd.opcode = opcode;
cmd.arg = 0;
cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
data.blksz = ESDHC_TUNING_BLOCK_PATTERN_LEN;
data.blocks = 1;
data.flags = MMC_DATA_READ;
data.sg = sg;
data.sg_len = 1;
mrq.cmd = &cmd;
mrq.cmd->mrq = &mrq;
mrq.data = &data;
mrq.data->mrq = &mrq;
mrq.cmd->data = mrq.data;
mrq.done = esdhc_request_done;
init_completion(&(mrq.completion));
spin_lock_irq(&host->lock);
host->mrq = &mrq;
sdhci_send_command(host, mrq.cmd);
spin_unlock_irq(&host->lock);
wait_for_completion(&mrq.completion);
if (cmd.error)
return cmd.error;
if (data.error)
return data.error;
return 0;
}
static void esdhc_post_tuning(struct sdhci_host *host)
{
u32 reg;
......@@ -763,21 +711,13 @@ static void esdhc_post_tuning(struct sdhci_host *host)
static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
{
struct scatterlist sg;
char *tuning_pattern;
int min, max, avg, ret;
tuning_pattern = kmalloc(ESDHC_TUNING_BLOCK_PATTERN_LEN, GFP_KERNEL);
if (!tuning_pattern)
return -ENOMEM;
sg_init_one(&sg, tuning_pattern, ESDHC_TUNING_BLOCK_PATTERN_LEN);
/* find the mininum delay first which can pass tuning */
min = ESDHC_TUNE_CTRL_MIN;
while (min < ESDHC_TUNE_CTRL_MAX) {
esdhc_prepare_tuning(host, min);
if (!esdhc_send_tuning_cmd(host, opcode, &sg))
if (!mmc_send_tuning(host->mmc))
break;
min += ESDHC_TUNE_CTRL_STEP;
}
......@@ -786,7 +726,7 @@ static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
max = min + ESDHC_TUNE_CTRL_STEP;
while (max < ESDHC_TUNE_CTRL_MAX) {
esdhc_prepare_tuning(host, max);
if (esdhc_send_tuning_cmd(host, opcode, &sg)) {
if (mmc_send_tuning(host->mmc)) {
max -= ESDHC_TUNE_CTRL_STEP;
break;
}
......@@ -796,11 +736,9 @@ static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
/* use average delay to get the best timing */
avg = (min + max) / 2;
esdhc_prepare_tuning(host, avg);
ret = esdhc_send_tuning_cmd(host, opcode, &sg);
ret = mmc_send_tuning(host->mmc);
esdhc_post_tuning(host);
kfree(tuning_pattern);
dev_dbg(mmc_dev(host->mmc), "tunning %s at 0x%x ret %d\n",
ret ? "failed" : "passed", avg, ret);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册