drm/i915: Rename GEN8_PIPE_FLIP_DONE to PRIMARY_FLIP_DONE

It is now clear that this interrupt is for the primary plane and not
something global to the pipe. It also matches what the spec calls it.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_irq.c

@@ -2060,7 +2060,7 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
 		if (pipe_iir & GEN8_PIPE_VBLANK)
 			drm_handle_vblank(dev, pipe);
 
-		if (pipe_iir & GEN8_PIPE_FLIP_DONE) {
+		if (pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE) {
 			intel_prepare_page_flip(dev, pipe);
 			intel_finish_page_flip_plane(dev, pipe);
 		}
@@ -3250,7 +3250,7 @@ static void gen8_gt_irq_postinstall(struct drm_i915_private *dev_priv)
 static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
 {
 	struct drm_device *dev = dev_priv->dev;
-	uint32_t de_pipe_masked = GEN8_PIPE_FLIP_DONE |
+	uint32_t de_pipe_masked = GEN8_PIPE_PRIMARY_FLIP_DONE |
 		GEN8_PIPE_CDCLK_CRC_DONE |
 		GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
 	uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |

drivers/gpu/drm/i915/i915_reg.h

@@ -4210,7 +4210,7 @@ enum punit_power_well {
 #define  GEN8_PIPE_SPRITE_FAULT		(1 << 9)
 #define  GEN8_PIPE_PRIMARY_FAULT	(1 << 8)
 #define  GEN8_PIPE_SPRITE_FLIP_DONE	(1 << 5)
-#define  GEN8_PIPE_FLIP_DONE		(1 << 4)
+#define  GEN8_PIPE_PRIMARY_FLIP_DONE	(1 << 4)
 #define  GEN8_PIPE_SCAN_LINE_EVENT	(1 << 2)
 #define  GEN8_PIPE_VSYNC		(1 << 1)
 #define  GEN8_PIPE_VBLANK		(1 << 0)