PCI: Add dev->has_secondary_link to track downstream PCIe links

A PCIe Port is an interface to a Link.  A Root Port is a PCI-PCI bridge in
a Root Complex and has a Link on its secondary (downstream) side.  For
other Ports, the Link may be on either the upstream (closer to the Root
Complex) or downstream side of the Port.

The usual topology has a Root Port connected to an Upstream Port.  We
previously assumed this was the only possible topology, and that a
Downstream Port's Link was always on its downstream side, like this:

                  +---------------------+
  +------+        |          Downstream |
  | Root |        | Upstream       Port +--Link--
  | Port +--Link--+ Port                |
  +------+        |          Downstream |
                  |                Port +--Link--
                  +---------------------+

But systems do exist (see URL below) where the Root Port is connected to a
Downstream Port.  In this case, a Downstream Port's Link may be on either
the upstream or downstream side:

                  +---------------------+
  +------+        |            Upstream |
  | Root |        | Downstream     Port +--Link--
  | Port +--Link--+ Port                |
  +------+        |          Downstream |
                  |                Port +--Link--
                  +---------------------+

We can't use the Port type to determine which side the Link is on, so add a
bit in struct pci_dev to keep track.

A Root Port's Link is always on the Port's secondary side.  A component
(Endpoint or Port) on the other end of the Link obviously has the Link on
its upstream side.  If that component is a Port, it is part of a Switch or
a Bridge.  A Bridge has a PCI or PCI-X bus on its secondary side, not a
Link.  The internal bus of a Switch connects the Port to another Port whose
Link is on the downstream side.

[bhelgaas: changelog, comment, cache "type", use if/else]
Link: http://lkml.kernel.org/r/54EB81B2.4050904@pobox.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=94361Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

drivers/pci/probe.c

@@ -973,6 +973,8 @@ void set_pcie_port_type(struct pci_dev *pdev)
 {
 	int pos;
 	u16 reg16;
+	int type;
+	struct pci_dev *parent;
 
 	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	if (!pos)
@@ -982,6 +984,22 @@ void set_pcie_port_type(struct pci_dev *pdev)
 	pdev->pcie_flags_reg = reg16;
 	pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, &reg16);
 	pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
+
+	/*
+	 * A Root Port is always the upstream end of a Link.  No PCIe
+	 * component has two Links.  Two Links are connected by a Switch
+	 * that has a Port on each Link and internal logic to connect the
+	 * two Ports.
+	 */
+	type = pci_pcie_type(pdev);
+	if (type == PCI_EXP_TYPE_ROOT_PORT)
+		pdev->has_secondary_link = 1;
+	else if (type == PCI_EXP_TYPE_UPSTREAM ||
+		 type == PCI_EXP_TYPE_DOWNSTREAM) {
+		parent = pci_upstream_bridge(pdev);
+		if (!parent->has_secondary_link)
+			pdev->has_secondary_link = 1;
+	}
 }
 
 void set_pcie_hotplug_bridge(struct pci_dev *pdev)

include/linux/pci.h

@@ -355,6 +355,7 @@ struct pci_dev {
 	unsigned int	broken_intx_masking:1;
 	unsigned int	io_window_1k:1;	/* Intel P2P bridge 1K I/O windows */
 	unsigned int	irq_managed:1;
+	unsigned int	has_secondary_link:1;
 	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */