Merge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

The only particularly remarkable change here is the one for handling of
the Android suspend ignore code for idle_bias_off CODECs.  That one is
actually a regression fix as some of the new power savings that have
been introduced confused the suspend ignore code, making devices that
are active for non-audio reasons look like they are idle causing them to
be suspended instead of being kept active.

sound/soc/codecs/cs42l73.c

@@ -1113,7 +1113,7 @@ static int cs42l73_pcm_hw_params(struct snd_pcm_substream *substream,
 		priv->config[id].mmcc &= 0xC0;
 		priv->config[id].mmcc |= cs42l73_mclk_coeffs[mclk_coeff].mmcc;
 		priv->config[id].spc &= 0xFC;
-		priv->config[id].spc &= MCK_SCLK_64FS;
+		priv->config[id].spc |= MCK_SCLK_MCLK;
 	} else {
 		/* CS42L73 Slave */
 		priv->config[id].spc &= 0xFC;

sound/soc/codecs/wm8962.c

@@ -3159,13 +3159,13 @@ static int wm8962_hw_params(struct snd_pcm_substream *substream,
 	case SNDRV_PCM_FORMAT_S16_LE:
 		break;
 	case SNDRV_PCM_FORMAT_S20_3LE:
-		aif0 |= 0x40;
+		aif0 |= 0x4;
 		break;
 	case SNDRV_PCM_FORMAT_S24_LE:
-		aif0 |= 0x80;
+		aif0 |= 0x8;
 		break;
 	case SNDRV_PCM_FORMAT_S32_LE:
-		aif0 |= 0xc0;
+		aif0 |= 0xc;
 		break;
 	default:
 		return -EINVAL;

sound/soc/codecs/wm8994.c

@@ -2753,11 +2753,6 @@ static int wm8994_resume(struct snd_soc_codec *codec)
 		codec->cache_only = 0;
 	}
 
-	/* Restore the registers */
-	ret = snd_soc_cache_sync(codec);
-	if (ret != 0)
-		dev_err(codec->dev, "Failed to sync cache: %d\n", ret);
-
 	wm8994_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
 	for (i = 0; i < ARRAY_SIZE(wm8994->fll); i++) {

sound/soc/codecs/wm_hubs.c

@@ -586,8 +586,8 @@ SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER1, 0, 1, 0),
 };
 
 static const struct snd_kcontrol_new line2_mix[] = {
-SOC_DAPM_SINGLE("IN2R Switch", WM8993_LINE_MIXER2, 2, 1, 0),
-SOC_DAPM_SINGLE("IN2L Switch", WM8993_LINE_MIXER2, 1, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_LINE_MIXER2, 2, 1, 0),
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_LINE_MIXER2, 1, 1, 0),
 SOC_DAPM_SINGLE("Output Switch", WM8993_LINE_MIXER2, 0, 1, 0),
 };
 
@@ -848,8 +848,8 @@ static const struct snd_soc_dapm_route lineout1_se_routes[] = {
 };
 
 static const struct snd_soc_dapm_route lineout2_diff_routes[] = {
-	{ "LINEOUT2 Mixer", "IN2L Switch", "IN2L PGA" },
-	{ "LINEOUT2 Mixer", "IN2R Switch", "IN2R PGA" },
+	{ "LINEOUT2 Mixer", "IN1L Switch", "IN1L PGA" },
+	{ "LINEOUT2 Mixer", "IN1R Switch", "IN1R PGA" },
 	{ "LINEOUT2 Mixer", "Output Switch", "Right Output PGA" },
 
 	{ "LINEOUT2N Driver", NULL, "LINEOUT2 Mixer" },

sound/soc/soc-core.c

@@ -567,6 +567,17 @@ int snd_soc_suspend(struct device *dev)
 		if (!codec->suspended && codec->driver->suspend) {
 			switch (codec->dapm.bias_level) {
 			case SND_SOC_BIAS_STANDBY:
+				/*
+				 * If the CODEC is capable of idle
+				 * bias off then being in STANDBY
+				 * means it's doing something,
+				 * otherwise fall through.
+				 */
+				if (codec->dapm.idle_bias_off) {
+					dev_dbg(codec->dev,
+						"idle_bias_off CODEC on over suspend\n");
+					break;
+				}
 			case SND_SOC_BIAS_OFF:
 				codec->driver->suspend(codec);
 				codec->suspended = 1;