提交 cf7ad043 编写于 作者: L Linus Torvalds

Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: allow alignment fault mode to be configured at kernel boot
  ARM: Update mach-types
  ARM: 5951/1: ARM: fix documentation of the PrimeCell bus
  ARM: 5950/1: ARM: Fix build error for arm1026ej-s processor
  MAINTAINERS: fix my e-mail and status for Gemini and FA526
  Gemini: wrong registers used to set reg_level in gpio_set_irq_type()
  ARM: 5944/1: scsi: fix timer setup in fas216.c
  ARM: 5938/1: ARM: L2: export outer_cache_fns
......@@ -315,6 +315,11 @@ and is between 256 and 4096 characters. It is defined in the file
aic79xx= [HW,SCSI]
See Documentation/scsi/aic79xx.txt.
alignment= [KNL,ARM]
Allow the default userspace alignment fault handler
behaviour to be specified. Bit 0 enables warnings,
bit 1 enables fixups, and bit 2 sends a segfault.
amd_iommu= [HW,X86-84]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:
......
......@@ -616,10 +616,10 @@ M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
S: Odd Fixes
F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
......@@ -641,9 +641,9 @@ T: topgit git://git.openezx.org/openezx.git
F: arch/arm/mach-pxa/ezx.c
ARM/FARADAY FA526 PORT
M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
S: Odd Fixes
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
......
......@@ -42,7 +42,8 @@
#endif
#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
defined(CONFIG_CPU_ARM1026)
# define MULTI_CACHE 1
#endif
......
......@@ -102,6 +102,7 @@ struct cpu_cache_fns cpu_cache;
#endif
#ifdef CONFIG_OUTER_CACHE
struct outer_cache_fns outer_cache;
EXPORT_SYMBOL(outer_cache);
#endif
struct stack {
......
......@@ -86,7 +86,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
unsigned int reg_both, reg_level, reg_type;
reg_type = __raw_readl(base + GPIO_INT_TYPE);
reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
reg_level = __raw_readl(base + GPIO_INT_LEVEL);
reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
switch (type) {
......@@ -117,7 +117,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
}
__raw_writel(reg_type, base + GPIO_INT_TYPE);
__raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
__raw_writel(reg_level, base + GPIO_INT_LEVEL);
__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
gpio_ack_irq(irq);
......
......@@ -11,6 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/moduleparam.h>
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/errno.h>
......@@ -77,6 +78,8 @@ static unsigned long ai_dword;
static unsigned long ai_multi;
static int ai_usermode;
core_param(alignment, ai_usermode, int, 0600);
#define UM_WARN (1 << 0)
#define UM_FIXUP (1 << 1)
#define UM_SIGNAL (1 << 2)
......
......@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
# Last update: Thu Jan 28 22:15:54 2010
# Last update: Sat Feb 20 14:16:15 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
......@@ -2257,7 +2257,7 @@ oratisalog MACH_ORATISALOG ORATISALOG 2268
oratismadi MACH_ORATISMADI ORATISMADI 2269
oratisot16 MACH_ORATISOT16 ORATISOT16 2270
oratisdesk MACH_ORATISDESK ORATISDESK 2271
v2_ca9 MACH_V2P_CA9 V2P_CA9 2272
vexpress MACH_VEXPRESS VEXPRESS 2272
sintexo MACH_SINTEXO SINTEXO 2273
cm3389 MACH_CM3389 CM3389 2274
omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275
......@@ -2636,3 +2636,45 @@ hw90240 MACH_HW90240 HW90240 2648
dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649
mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650
scat110 MACH_SCAT110 SCAT110 2651
acer_a1 MACH_ACER_A1 ACER_A1 2652
cmcontrol MACH_CMCONTROL CMCONTROL 2653
pelco_lamar MACH_PELCO_LAMAR PELCO_LAMAR 2654
rfp43 MACH_RFP43 RFP43 2655
sk86r0301 MACH_SK86R0301 SK86R0301 2656
ctpxa MACH_CTPXA CTPXA 2657
epb_arm9_a MACH_EPB_ARM9_A EPB_ARM9_A 2658
guruplug MACH_GURUPLUG GURUPLUG 2659
spear310 MACH_SPEAR310 SPEAR310 2660
spear320 MACH_SPEAR320 SPEAR320 2661
robotx MACH_ROBOTX ROBOTX 2662
lsxhl MACH_LSXHL LSXHL 2663
smartlite MACH_SMARTLITE SMARTLITE 2664
cws2 MACH_CWS2 CWS2 2665
m619 MACH_M619 M619 2666
smartview MACH_SMARTVIEW SMARTVIEW 2667
lsa_salsa MACH_LSA_SALSA LSA_SALSA 2668
kizbox MACH_KIZBOX KIZBOX 2669
htccharmer MACH_HTCCHARMER HTCCHARMER 2670
guf_neso_lt MACH_GUF_NESO_LT GUF_NESO_LT 2671
pm9g45 MACH_PM9G45 PM9G45 2672
htcpanther MACH_HTCPANTHER HTCPANTHER 2673
htcpanther_cdma MACH_HTCPANTHER_CDMA HTCPANTHER_CDMA 2674
reb01 MACH_REB01 REB01 2675
aquila MACH_AQUILA AQUILA 2676
spark_sls_hw2 MACH_SPARK_SLS_HW2 SPARK_SLS_HW2 2677
sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678
surf7x30 MACH_SURF7X30 SURF7X30 2679
micro2440 MACH_MICRO2440 MICRO2440 2680
am2440 MACH_AM2440 AM2440 2681
tq2440 MACH_TQ2440 TQ2440 2682
lpc2478oem MACH_LPC2478OEM LPC2478OEM 2683
ak880x MACH_AK880X AK880X 2684
cobra3530 MACH_COBRA3530 COBRA3530 2685
pmppb MACH_PMPPB PMPPB 2686
u6715 MACH_U6715 U6715 2687
axar1500_sender MACH_AXAR1500_SENDER AXAR1500_SENDER 2688
g30_dvb MACH_G30_DVB G30_DVB 2689
vc088x MACH_VC088X VC088X 2690
mioa702 MACH_MIOA702 MIOA702 2691
hpmin MACH_HPMIN HPMIN 2692
ak880xak MACH_AK880XAK AK880XAK 2693
......@@ -2516,7 +2516,7 @@ int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
if (info->scsi.phase == PHASE_IDLE)
fas216_kick(info);
mod_timer(&info->eh_timer, 30 * HZ);
mod_timer(&info->eh_timer, jiffies + 30 * HZ);
spin_unlock_irqrestore(&info->host_lock, flags);
/*
......
/*
* linux/include/asm-arm/hardware/amba.h
* linux/include/amba/bus.h
*
* This device type deals with ARM PrimeCells and anything else that
* presents a proper CID (0xB105F00D) at the end of the I/O register
* region or that is derived from a PrimeCell.
*
* Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册