Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support.  Among the things new for this release
  are:

   - at91: Added support for the new SAMA5D4 SoC, following the earlier
     SAMA5D3
   - bcm: Added support for BCM63XX family of DSL SoCs
   - hisi: Added support for HiP04 server-class SoC
   - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
   - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC

  Noteworthy changes to existing SoC support are:

   - imx: convert i.MX1 to device tree
   - omap: lots of power management work
   - omap: base support to enable moving to standard UART driver
   - shmobile: lots of progress for multiplatform support, still
     ongoing"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits)
  ARM: hisi: depend on ARCH_MULTI_V7
  CNS3xxx: Fix debug UART.
  ARM: at91: fix nommu build regression
  ARM: meson: add basic support for MesonX SoCs
  ARM: meson: debug: add debug UART for earlyprintk support
  irq: Export handle_fasteoi_irq
  ARM: mediatek: Add earlyprintk support for mt6589
  ARM: hisi: Fix platmcpm compilation when ARMv6 is selected
  ARM: debug: fix alphanumerical order on debug uarts
  ARM: at91: document Atmel SMART compatibles
  ARM: at91: add sama5d4 support to sama5_defconfig
  ARM: at91: dt: add device tree file for SAMA5D4ek board
  ARM: at91: dt: add device tree file for SAMA5D4 SoC
  ARM: at91: SAMA5D4 SoC detection code and low level routines
  ARM: at91: introduce basic SAMA5D4 support
  clk: at91: add a driver for the h32mx clock
  ARM: pxa3xx: provide specific platform_devices for all ssp ports
  ARM: pxa: ssp: provide platform_device_id for PXA3xx
  ARM: OMAP4+: Remove static iotable mappings for SRAM
  ARM: OMAP4+: Move SRAM data to DT
  ...

Documentation/devicetree/bindings/arm/atmel-at91.txt

 Atmel AT91 device tree bindings.
 ================================
 
+Boards with a SoC of the Atmel AT91 or SMART family shall have the following
+properties:
+
+Required root node properties:
+compatible: must be one of:
+ * "atmel,at91rm9200"
+
+ * "atmel,at91sam9" for SoCs using an ARM926EJ-S core, shall be extended with
+   the specific SoC family or compatible:
+    o "atmel,at91sam9260"
+    o "atmel,at91sam9261"
+    o "atmel,at91sam9263"
+    o "atmel,at91sam9x5" for the 5 series, shall be extended with the specific
+      SoC compatible:
+       - "atmel,at91sam9g15"
+       - "atmel,at91sam9g25"
+       - "atmel,at91sam9g35"
+       - "atmel,at91sam9x25"
+       - "atmel,at91sam9x35"
+    o "atmel,at91sam9g20"
+    o "atmel,at91sam9g45"
+    o "atmel,at91sam9n12"
+    o "atmel,at91sam9rl"
+ * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
+   SoC family:
+    o "atmel,sama5d3" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d31"
+       - "atmel,sama5d33"
+       - "atmel,sama5d34"
+       - "atmel,sama5d35"
+       - "atmel,sama5d36"
+    o "atmel,sama5d4" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d41"
+       - "atmel,sama5d42"
+       - "atmel,sama5d43"
+       - "atmel,sama5d44"
+
 PIT Timer required properties:
 - compatible: Should be "atmel,at91sam9260-pit"
 - reg: Should contain registers location and length

Documentation/devicetree/bindings/arm/bcm/bcm63138.txt

+Broadcom BCM63138 DSL System-on-a-Chip device tree bindings
+-----------------------------------------------------------
+
+Boards compatible with the BCM63138 DSL System-on-a-Chip should have the
+following properties:
+
+Required root node property:
+
+compatible: should be "brcm,bcm63138"

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

@@ -5,6 +5,11 @@ Hi4511 Board
 Required root node properties:
 	- compatible = "hisilicon,hi3620-hi4511";
 
+HiP04 D01 Board
+Required root node properties:
+	- compatible = "hisilicon,hip04-d01";
+
+
 Hisilicon system controller
 
 Required properties:
@@ -55,3 +60,21 @@ Example:
 		compatible = "hisilicon,pctrl";
 		reg = <0xfca09000 0x1000>;
 	};
+
+-----------------------------------------------------------------------
+Fabric:
+
+Required Properties:
+- compatible: "hisilicon,hip04-fabric";
+- reg: Address and size of Fabric
+
+-----------------------------------------------------------------------
+Bootwrapper boot method (software protocol on SMP):
+
+Required Properties:
+- compatible: "hisilicon,hip04-bootwrapper";
+- boot-method: Address and size of boot method.
+  [0]: bootwrapper physical address
+  [1]: bootwrapper size
+  [2]: relocation physical address
+  [3]: relocation size

Documentation/devicetree/bindings/arm/omap/mpu.txt

@@ -10,6 +10,9 @@ Required properties:
 	       Should be "ti,omap5-mpu" for OMAP5
 - ti,hwmods: "mpu"
 
+Optional properties:
+- sram:	Phandle to the ocmcram node
+
 Examples:
 
 - For an OMAP5 SMP system:

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt

+NVIDIA Tegra Flow Controller
+
+Required properties:
+- compatible: Should be "nvidia,tegra<chip>-flowctrl"
+- reg: Should contain one register range (address and length)
+
+Example:
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra20-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};

Documentation/devicetree/bindings/clock/at91-clock.txt

@@ -74,6 +74,9 @@ Required properties:
 	"atmel,at91sam9x5-clk-utmi":
 		at91 utmi clock
 
+	"atmel,sama5d4-clk-h32mx":
+		at91 h32mx clock
+
 Required properties for SCKC node:
 - reg : defines the IO memory reserved for the SCKC.
 - #size-cells : shall be 0 (reg is used to encode clk id).
@@ -447,3 +450,14 @@ For example:
 		#clock-cells = <0>;
 		clocks = <&main>;
 	};
+
+Required properties for 32 bits bus Matrix clock (h32mx clock):
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the master clock source phandle.
+
+For example:
+	h32ck: h32mxck {
+		#clock-cells = <0>;
+		compatible = "atmel,sama5d4-clk-h32mx";
+		clocks = <&mck>;
+	};

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

@@ -11,9 +11,11 @@ Required Properties:
 
   - compatible: Must be one of the following
     - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
+    - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
     - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
     - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
     - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
+    - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks
     - "renesas,cpg-mstp-clock" for generic MSTP gate clocks
   - reg: Base address and length of the I/O mapped registers used by the MSTP
     clocks. The first register is the clock control register and is mandatory.

Documentation/devicetree/bindings/memory-controllers/synopsys.txt

+Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
+
+Required properties:
+ - compatible: Should be 'xlnx,zynq-ddrc-a05'
+ - reg: Base address and size of the controllers memory area
+
+Example:
+	memory-controller@f8006000 {
+		compatible = "xlnx,zynq-ddrc-a05";
+		reg = <0xf8006000 0x1000>;
+	};

MAINTAINERS

@@ -2065,6 +2065,14 @@ F:	arch/arm/mach-bcm/bcm_5301x.c
 F:	arch/arm/boot/dts/bcm5301x.dtsi
 F:	arch/arm/boot/dts/bcm470*
 
+BROADCOM BCM63XX ARM ARCHITECTURE
+M:	Florian Fainelli <f.fainelli@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org
+T:	git git://git.github.com/brcm/linux.git
+S:	Maintained
+F:	arch/arm/mach-bcm/bcm63xx.c
+F:	arch/arm/include/debug/bcm63xx.S
+
 BROADCOM BCM7XXX ARM ARCHITECTURE
 M:	Marc Carino <marc.ceeeee@gmail.com>
 M:	Brian Norris <computersforpeace@gmail.com>

arch/arm/Kconfig

@@ -387,6 +387,7 @@ config ARCH_CLPS711X
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
 	select MFD_SYSCON
+	select SOC_BUS
 	help
 	  Support for Cirrus Logic 711x/721x/731x based boards.
 
@@ -890,6 +891,8 @@ source "arch/arm/mach-keystone/Kconfig"
 
 source "arch/arm/mach-ks8695/Kconfig"
 
+source "arch/arm/mach-meson/Kconfig"
+
 source "arch/arm/mach-msm/Kconfig"
 
 source "arch/arm/mach-moxart/Kconfig"
@@ -1407,6 +1410,15 @@ config MCPM
 	  for (multi-)cluster based systems, such as big.LITTLE based
 	  systems.
 
+config MCPM_QUAD_CLUSTER
+	bool
+	depends on MCPM
+	help
+	  To avoid wasting resources unnecessarily, MCPM only supports up
+	  to 2 clusters by default.
+	  Platforms with 3 or 4 clusters that use MCPM must select this
+	  option to allow the additional clusters to be managed.
+
 config BIG_LITTLE
 	bool "big.LITTLE support (Experimental)"
 	depends on CPU_V7 && SMP

arch/arm/Kconfig.debug

@@ -101,6 +101,10 @@ choice
 		bool "Kernel low-level debugging on 9263 and 9g45"
 		depends on HAVE_AT91_DBGU1
 
+	config AT91_DEBUG_LL_DBGU2
+		bool "Kernel low-level debugging on sama5d4"
+		depends on HAVE_AT91_DBGU2
+
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
 		depends on ARCH_BCM2835
@@ -122,6 +126,11 @@ choice
 		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
 		  bcm11351, etc...)
 
+	config DEBUG_BCM63XX
+		bool "Kernel low-level debugging on BCM63XX UART"
+		depends on ARCH_BCM_63XX
+		select DEBUG_UART_BCM63XX
+
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
 		depends on ARCH_BERLIN
@@ -223,14 +232,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on HI3716 UART.
 
-	config DEBUG_HIX5HD2_UART
-		bool "Hisilicon Hix5hd2 Debug UART"
-		depends on ARCH_HIX5HD2
-		select DEBUG_UART_PL01X
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on Hix5hd2 UART.
-
 	config DEBUG_HIGHBANK_UART
 		bool "Kernel low-level debugging messages via Highbank UART"
 		depends on ARCH_HIGHBANK
@@ -239,6 +240,22 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the UART on Highbank based devices.
 
+	config DEBUG_HIP04_UART
+		bool "Hisilicon HiP04 Debug UART"
+		depends on ARCH_HIP04
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on HIP04 UART.
+
+	config DEBUG_HIX5HD2_UART
+		bool "Hisilicon Hix5hd2 Debug UART"
+		depends on ARCH_HIX5HD2
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Hix5hd2 UART.
+
 	config DEBUG_IMX1_UART
 		bool "i.MX1 Debug UART"
 		depends on SOC_IMX1
@@ -348,6 +365,13 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART1 serial port on KEYSTONE2 devices.
 
+	config DEBUG_MESON_UARTAO
+		bool "Kernel low-level debugging via Meson6 UARTAO"
+		depends on ARCH_MESON
+		help
+		  Say Y here if you want kernel low-lever debugging support
+		  on Amlogic Meson6 based platforms on the UARTAO.
+
 	config DEBUG_MMP_UART2
 		bool "Kernel low-level debugging message via MMP UART2"
 		depends on ARCH_MMP
@@ -834,6 +858,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Ux500 based platforms.
 
+	config DEBUG_MT6589_UART0
+		bool "Mediatek mt6589 UART0"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for Mediatek mt6589 based platforms on UART0.
+
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
 		depends on ARCH_VEXPRESS && CPU_CP15_MMU
@@ -1011,6 +1043,7 @@ config DEBUG_LL_INCLUDE
 	string
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
+	default "debug/meson.S" if DEBUG_MESON_UARTAO
 	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
 	default "debug/exynos.S" if DEBUG_EXYNOS_UART
 	default "debug/efm32.S" if DEBUG_LL_UART_EFM32
@@ -1038,6 +1071,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
+	default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
 	default "mach/debug-macro.S"
 
 # Compatibility options for PL01x
@@ -1057,6 +1091,10 @@ config DEBUG_UART_8250
 		ARCH_IOP33X || ARCH_IXP4XX || \
 		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
 
+# Compatibility options for BCM63xx
+config DEBUG_UART_BCM63XX
+	def_bool ARCH_BCM_63XX
+
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
 	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
@@ -1075,6 +1113,7 @@ config DEBUG_UART_PHYS
 	default 0x10126000 if DEBUG_RK3X_UART1
 	default 0x101f1000 if ARCH_VERSATILE
 	default 0x101fb000 if DEBUG_NOMADIK_UART
+	default 0x11006000 if DEBUG_MT6589_UART0
 	default 0x16000000 if ARCH_INTEGRATOR
 	default 0x18000300 if DEBUG_BCM_5301X
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
@@ -1093,6 +1132,7 @@ config DEBUG_UART_PHYS
 				DEBUG_S3C2410_UART1)
 	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
 				DEBUG_S3C2410_UART2)
+	default 0x78000000 if DEBUG_CNS3XXX
 	default 0x7c0003f8 if FOOTBRIDGE
 	default 0x78000000 if DEBUG_CNS3XXX
 	default 0x80070000 if DEBUG_IMX23_UART
@@ -1107,9 +1147,11 @@ config DEBUG_UART_PHYS
 	default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
 	default 0xd0012000 if DEBUG_MVEBU_UART
+	default 0xc81004c0 if DEBUG_MESON_UARTAO
 	default 0xd4017000 if DEBUG_MMP_UART2
 	default 0xd4018000 if DEBUG_MMP_UART3
 	default 0xe0000000 if ARCH_SPEAR13XX
+	default 0xe4007000 if DEBUG_HIP04_UART
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
 	default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
@@ -1123,11 +1165,13 @@ config DEBUG_UART_PHYS
 	default 0xffc02000 if DEBUG_SOCFPGA_UART
 	default 0xffd82340 if ARCH_IOP13XX
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
+	default 0xfffe8600 if DEBUG_UART_BCM63XX
 	default 0xfffff700 if ARCH_IOP33X
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_LL_UART_EFM32 || \
-		DEBUG_UART_8250 || DEBUG_UART_PL01X || \
-		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
+		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
+		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+		DEBUG_UART_BCM63XX
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
@@ -1137,6 +1181,7 @@ config DEBUG_UART_VIRT
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835
 	default 0xf1000300 if DEBUG_BCM_5301X
+	default 0xf1006000 if DEBUG_MT6589_UART0
 	default 0xf11f1000 if ARCH_VERSATILE
 	default 0xf1600000 if ARCH_INTEGRATOR
 	default 0xf1c28000 if DEBUG_SUNXI_UART0
@@ -1152,17 +1197,20 @@ config DEBUG_UART_VIRT
 	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
 				DEBUG_S3C2410_UART2)
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
+	default 0xf8007000 if DEBUG_HIP04_UART
 	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
 	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
+	default 0xfcfe8600 if DEBUG_UART_BCM63XX
 	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
 	default 0xfd000000 if ARCH_SPEAR13XX
 	default 0xfd012000 if ARCH_MV78XX0
 	default 0xfde12000 if ARCH_DOVE
 	default 0xfe012000 if ARCH_ORION5X
+	default 0xf31004c0 if DEBUG_MESON_UARTAO
 	default 0xfe017000 if DEBUG_MMP_UART2
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
@@ -1194,8 +1242,9 @@ config DEBUG_UART_VIRT
 	default 0xff003000 if DEBUG_U300_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
-		DEBUG_UART_8250 || DEBUG_UART_PL01X || \
-		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
+		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
+		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+		DEBUG_UART_BCM63XX
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"

arch/arm/Makefile

@@ -169,6 +169,7 @@ machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 machine-$(CONFIG_ARCH_KS8695)		+= ks8695
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
+machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
 machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MSM)		+= msm

arch/arm/boot/dts/Makefile

@@ -48,11 +48,14 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d36ek.dtb
+# sama5d4
+dtb-$(CONFIG_ARCH_AT91)	+= at91-sama5d4ek.dtb
 
 dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
 dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
+dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
 	bcm21664-garnet.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
@@ -90,6 +93,7 @@ dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb
 dtb-$(CONFIG_ARCH_HIX5HD2) += hisi-x5hd2-dkb.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
+dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
 	integratorcp.dtb
 dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
@@ -361,7 +365,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7778-bockw-reference.dtb \
-	r8a7740-armadillo800eva-reference.dtb \
 	r8a7779-marzen.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7790-lager.dtb \
@@ -372,6 +375,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
 	sh7372-mackerel.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
+	r8a7740-armadillo800eva.dtb \
 	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7790-lager.dtb \

arch/arm/boot/dts/am33xx.dtsi

@@ -726,9 +726,8 @@
 		};
 
 		ocmcram: ocmcram@40300000 {
-			compatible = "ti,am3352-ocmcram";
-			reg = <0x40300000 0x10000>;
-			ti,hwmods = "ocmcram";
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x10000>; /* 64k */
 		};
 
 		wkup_m3: wkup_m3@44d00000 {

arch/arm/boot/dts/am4372.dtsi

@@ -885,6 +885,11 @@
 				clock-names = "fck";
 			};
 		};
+
+		ocmcram: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x40000>; /* 256k */
+		};
 	};
 };
 

arch/arm/boot/dts/at91-sama5d4ek.dts

+/*
+ * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4-EK";
+	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			lcd_bus@f0000000 {
+				status = "okay";
+
+				lcd@f0000000 {
+					status = "okay";
+				};
+
+				lcdovl1@f0000140 {
+					status = "okay";
+				};
+
+				lcdovl2@f0000240 {
+					status = "okay";
+				};
+
+				lcdheo1@f0000340 {
+					status = "okay";
+				};
+			};
+
+			adc0: adc@fc034000 {
+				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
+				atmel,adc-vref = <3300>;
+				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
+				status = "okay";		/* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 6 0>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
+					};
+				};
+			};
+		};
+
+		usb0: gadget@00400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00600000 {
+			status = "okay";
+		};
+
+		nand0: nand@80000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+			atmel,has-pmecc;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+	};
+};

arch/arm/boot/dts/bcm63138.dtsi

+/*
+ * Broadcom BCM63138 DSL SoCs Device Tree
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,bcm63138";
+	model = "Broadcom BCM63138 DSL SoC";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		uart0 = &serial0;
+		uart1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <500000000>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+	};
+
+	/* ARM bus */
+	axi@80000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x80000000 0x784000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		L2: cache-controller@1d000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x1d000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			cache-sets = <16>;
+			cache-size = <0x80000>;
+			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		scu: scu@1e000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x1e000 0x100>;
+		};
+
+		gic: interrupt-controller@1e100 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x1f000 0x1000
+				0x1e100 0x100>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+
+		global_timer: timer@1e200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1e200 0x20>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		local_timer: local-timer@1e600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1e600 0x20>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		twd_watchdog: watchdog@1e620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x1e620 0x20>;
+			interupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	/* Legacy UBUS base */
+	ubus@fffe8000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8100>;
+
+		serial0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x1b>;
+			interrupts = <GIC_SPI 32 0>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		serial1: serial@620 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x620 0x1b>;
+			interrupts = <GIC_SPI 33 0>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+	};
+};

arch/arm/boot/dts/bcm963138dvt.dts

+/*
+ * Broadcom BCM63138 Reference Board DTS
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	compatible = "brcm,BCM963138DVT", "brcm,bcm63138";
+	model = "Broadcom BCM963138DVT";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory {
+		reg = <0x0 0x08000000>;
+	};
+
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};

arch/arm/boot/dts/dra7.dtsi

@@ -89,6 +89,7 @@
 		prm: prm@4ae06000 {
 			compatible = "ti,dra7-prm";
 			reg = <0x4ae06000 0x3000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 
 			prm_clocks: clocks {
 				#address-cells = <1>;

arch/arm/boot/dts/hip04-d01.dts

+/*
+ *  Copyright (C) 2013-2014 Linaro Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "hip04.dtsi"
+
+/ {
+	/* memory bus is 64-bit */
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Hisilicon D01 Development Board";
+	compatible = "hisilicon,hip04-d01";
+
+	memory@00000000,10000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000 0x00000000 0xc0000000>,
+		      <0x00000004 0xc0000000 0x00000003 0x40000000>;
+	};
+
+	soc {
+		uart0: uart@4007000 {
+			status = "ok";
+		};
+	};
+};

arch/arm/boot/dts/hip04.dtsi

+/*
+ * Hisilicon Ltd. HiP04 SoC
+ *
+ * Copyright (C) 2013-2014 Hisilicon Ltd.
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	/* memory bus is 64-bit */
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	bootwrapper {
+		compatible = "hisilicon,hip04-bootwrapper";
+		boot-method = <0x10c00000 0x10000>, <0xe0000100 0x1000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+				core1 {
+					cpu = <&CPU9>;
+				};
+				core2 {
+					cpu = <&CPU10>;
+				};
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU12>;
+				};
+				core1 {
+					cpu = <&CPU13>;
+				};
+				core2 {
+					cpu = <&CPU14>;
+				};
+				core3 {
+					cpu = <&CPU15>;
+				};
+			};
+		};
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+		};
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+		};
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x102>;
+		};
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x103>;
+		};
+		CPU8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x200>;
+		};
+		CPU9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x201>;
+		};
+		CPU10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x202>;
+		};
+		CPU11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x203>;
+		};
+		CPU12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x300>;
+		};
+		CPU13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x301>;
+		};
+		CPU14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x302>;
+		};
+		CPU15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x303>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	clk_50m: clk_50m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	clk_168m: clk_168m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <168000000>;
+	};
+
+	soc {
+		/* It's a 32-bit SoC. */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0 0xe0000000 0x10000000>;
+
+		gic: interrupt-controller@c01000 {
+			compatible = "hisilicon,hip04-intc";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <1 9 0xf04>;
+
+			reg = <0xc01000 0x1000>, <0xc02000 0x1000>,
+			      <0xc04000 0x2000>, <0xc06000 0x2000>;
+		};
+
+		sysctrl: sysctrl {
+			compatible = "hisilicon,sysctrl";
+			reg = <0x3e00000 0x00100000>;
+		};
+
+		fabric: fabric {
+			compatible = "hisilicon,hip04-fabric";
+			reg = <0x302a000 0x1000>;
+		};
+
+		dual_timer0: dual_timer@3000000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x3000000 0x1000>;
+			interrupts = <0 224 4>;
+			clocks = <&clk_50m>, <&clk_50m>;
+			clock-names = "apb_pclk";
+		};
+
+		arm-pmu {
+			compatible = "arm,cortex-a15-pmu";
+			interrupts = <0 64 4>,
+				     <0 65 4>,
+				     <0 66 4>,
+				     <0 67 4>,
+				     <0 68 4>,
+				     <0 69 4>,
+				     <0 70 4>,
+				     <0 71 4>,
+				     <0 72 4>,
+				     <0 73 4>,
+				     <0 74 4>,
+				     <0 75 4>,
+				     <0 76 4>,
+				     <0 77 4>,
+				     <0 78 4>,
+				     <0 79 4>;
+		};
+
+		uart0: uart@4007000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x4007000 0x1000>;
+			interrupts = <0 381 4>;
+			clocks = <&clk_168m>;
+			clock-names = "uartclk";
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		sata0: sata@a000000 {
+			compatible = "hisilicon,hisi-ahci";
+			reg = <0xa000000 0x1000000>;
+			interrupts = <0 372 4>;
+		};
+
+	};
+};

arch/arm/boot/dts/omap3.dtsi

@@ -97,6 +97,7 @@
 		prm: prm@48306000 {
 			compatible = "ti,omap3-prm";
 			reg = <0x48306000 0x4000>;
+			interrupts = <11>;
 
 			prm_clocks: clocks {
 				#address-cells = <1>;

arch/arm/boot/dts/omap4.dtsi

@@ -81,6 +81,7 @@
 		mpu {
 			compatible = "ti,omap4-mpu";
 			ti,hwmods = "mpu";
+			sram = <&ocmcram>;
 		};
 
 		dsp {
@@ -129,6 +130,7 @@
 		prm: prm@4a306000 {
 			compatible = "ti,omap4-prm";
 			reg = <0x4a306000 0x3000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 
 			prm_clocks: clocks {
 				#address-cells = <1>;
@@ -208,6 +210,11 @@
 			};
 		};
 
+		ocmcram: ocmcram@40304000 {
+			compatible = "mmio-sram";
+			reg = <0x40304000 0xa000>; /* 40k */
+		};
+
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;

arch/arm/boot/dts/omap5.dtsi

@@ -104,8 +104,9 @@
 	soc {
 		compatible = "ti,omap-infra";
 		mpu {
-			compatible = "ti,omap5-mpu";
+			compatible = "ti,omap4-mpu";
 			ti,hwmods = "mpu";
+			sram = <&ocmcram>;
 		};
 	};
 
@@ -131,6 +132,7 @@
 		prm: prm@4ae06000 {
 			compatible = "ti,omap5-prm";
 			reg = <0x4ae06000 0x3000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 
 			prm_clocks: clocks {
 				#address-cells = <1>;
@@ -219,6 +221,11 @@
 			};
 		};
 
+		ocmcram: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x20000>; /* 128k */
+		};
+
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;

arch/arm/boot/dts/r7s72100-genmai.dts

@@ -43,6 +43,10 @@
 	clock-frequency = <48000000>;
 };
 
+&mtu2 {
+	status = "ok";
+};
+
 &i2c2 {
 	status = "okay";
 	clock-frequency = <400000>;

arch/arm/boot/dts/r7s72100.dtsi

@@ -229,6 +229,16 @@
 		status = "disabled";
 	};
 
+	mtu2: timer@fcff0000 {
+		compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+		reg = <0xfcff0000 0x400>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tgi0a";
+		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
 	scif0: serial@e8007000 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8007000 64>;

arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts

-/*
- * Reference Device Tree Source for the armadillo 800 eva board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7740.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "armadillo 800 eva reference";
-	compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
-
-	aliases {
-		serial1 = &scifa1;
-	};
-
-	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reg_3p3v: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_sdhi0: regulator@1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator@2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_sdhi0>;
-
-		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
-		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
-		states = <3300000 0
-			  1800000 1>;
-
-		enable-active-high;
-	};
-
-	reg_5p0v: regulator@3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-5.0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "SW3";
-			gpio-key,wakeup;
-		};
-
-		back-key {
-			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			label = "SW4";
-		};
-
-		menu-key {
-			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			label = "SW5";
-		};
-
-		home-key {
-			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			label = "SW6";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led3 {
-			gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
-			label = "LED3";
-		};
-		led4 {
-			gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
-			label = "LED4";
-		};
-		led5 {
-			gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
-			label = "LED5";
-		};
-		led6 {
-			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
-			label = "LED6";
-		};
-	};
-
-	i2c2: i2c@2 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
-			 &pfc 91 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
-		default-brightness-level = <9>;
-		pinctrl-0 = <&backlight_pins>;
-		pinctrl-names = "default";
-		power-supply = <&reg_5p0v>;
-		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "i2s";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sh_fsi2 0>;
-			bitclock-inversion;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&wm8978>;
-			bitclock-master;
-			frame-master;
-			system-clock-frequency = <12288000>;
-		};
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy0>;
-	status = "ok";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	touchscreen@55 {
-		compatible = "sitronix,st1232";
-		reg = <0x55>;
-		interrupt-parent = <&irqpin1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&st1232_pins>;
-		pinctrl-names = "default";
-		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
-	};
-
-	wm8978: wm8978@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8978";
-		reg = <0x1a>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	rtc@30 {
-		compatible = "sii,s35390a";
-		reg = <0x30>;
-	};
-};
-
-&pfc {
-	ether_pins: ether {
-		renesas,groups = "gether_mii", "gether_int";
-		renesas,function = "gether";
-	};
-
-	scifa1_pins: serial1 {
-		renesas,groups = "scifa1_data";
-		renesas,function = "scifa1";
-	};
-
-	st1232_pins: touchscreen {
-		renesas,groups = "intc_irq10";
-		renesas,function = "intc";
-	};
-
-	backlight_pins: backlight {
-		renesas,groups = "tpu0_to2_1";
-		renesas,function = "tpu0";
-	};
-
-	mmc0_pins: mmc0 {
-		renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
-		renesas,function = "mmc0";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
-		renesas,function = "sdhi0";
-	};
-
-	fsia_pins: sounda {
-		renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
-				 "fsia_data_in_1", "fsia_data_out_0";
-		renesas,function = "fsia";
-	};
-};
-
-&tpu {
-	status = "okay";
-};
-
-&mmcif0 {
-	pinctrl-0 = <&mmc0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&scifa1 {
-	pinctrl-0 = <&scifa1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	bus-width = <4>;
-	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sh_fsi2 {
-	pinctrl-0 = <&fsia_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};

arch/arm/boot/dts/r8a7740-armadillo800eva.dts

@@ -10,10 +10,18 @@
 
 /dts-v1/;
 #include "r8a7740.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "armadillo 800 eva";
-	compatible = "renesas,armadillo800eva";
+	compatible = "renesas,armadillo800eva", "renesas,r8a7740";
+
+	aliases {
+		serial1 = &scifa1;
+	};
 
 	chosen {
 		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
@@ -23,4 +31,270 @@
 		device_type = "memory";
 		reg = <0x40000000 0x20000000>;
 	};
+
+	reg_3p3v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sdhi0>;
+
+		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
+		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0
+			  1800000 1>;
+
+		enable-active-high;
+	};
+
+	reg_5p0v: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5.0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "SW3";
+			gpio-key,wakeup;
+		};
+
+		back-key {
+			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "SW4";
+		};
+
+		menu-key {
+			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "SW5";
+		};
+
+		home-key {
+			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "SW6";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led3 {
+			gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+		led4 {
+			gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+			label = "LED4";
+		};
+		led5 {
+			gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+			label = "LED5";
+		};
+		led6 {
+			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
+		};
+	};
+
+	i2c2: i2c@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
+			 &pfc 91 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <9>;
+		pinctrl-0 = <&backlight_pins>;
+		pinctrl-names = "default";
+		power-supply = <&reg_5p0v>;
+		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sh_fsi2 0>;
+			bitclock-inversion;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8978>;
+			bitclock-master;
+			frame-master;
+			system-clock-frequency = <12288000>;
+		};
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy0>;
+	status = "ok";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&extal1_clk {
+	clock-frequency = <25000000>;
+};
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+&fsibck_clk {
+	clock-frequency = <12288000>;
+};
+&cpg_clocks {
+	renesas,mode = <0x05>; /* MD_CK0 | MD_CK2 */
+};
+
+&cmt1 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "okay";
+	touchscreen@55 {
+		compatible = "sitronix,st1232";
+		reg = <0x55>;
+		interrupt-parent = <&irqpin1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&st1232_pins>;
+		pinctrl-names = "default";
+		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
+	};
+
+	wm8978: wm8978@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
+&pfc {
+	ether_pins: ether {
+		renesas,groups = "gether_mii", "gether_int";
+		renesas,function = "gether";
+	};
+
+	scifa1_pins: serial1 {
+		renesas,groups = "scifa1_data";
+		renesas,function = "scifa1";
+	};
+
+	st1232_pins: touchscreen {
+		renesas,groups = "intc_irq10";
+		renesas,function = "intc";
+	};
+
+	backlight_pins: backlight {
+		renesas,groups = "tpu0_to2_1";
+		renesas,function = "tpu0";
+	};
+
+	mmc0_pins: mmc0 {
+		renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
+		renesas,function = "mmc0";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
+		renesas,function = "sdhi0";
+	};
+
+	fsia_pins: sounda {
+		renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
+				 "fsia_data_in_1", "fsia_data_out_0";
+		renesas,function = "fsia";
+	};
+};
+
+&tpu {
+	status = "okay";
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&scifa1 {
+	pinctrl-0 = <&scifa1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sh_fsi2 {
+	pinctrl-0 = <&fsia_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
 };

arch/arm/boot/dts/r8a7740.dtsi

@@ -10,6 +10,7 @@
 
 /include/ "skeleton.dtsi"
 
+#include <dt-bindings/clock/r8a7740-clock.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -40,6 +41,18 @@
 		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	cmt1: timer@e6138000 {
+		compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
+		reg = <0xe6138000 0x170>;
+		interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0x3f>;
+
+		status = "disabled";
+	};
+
 	/* irqpin0: IRQ0 - IRQ7 */
 	irqpin0: irqpin@e6900000 {
 		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
@@ -125,7 +138,7 @@
 		reg = <0xe9a00000 0x800>,
 		      <0xe9a01800 0x800>;
 		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
-		/* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */
+		clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
 		phy-mode = "mii";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -141,6 +154,7 @@
 			      0 202 IRQ_TYPE_LEVEL_HIGH
 			      0 203 IRQ_TYPE_LEVEL_HIGH
 			      0 204 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
 		status = "disabled";
 	};
 
@@ -153,6 +167,7 @@
 			      0 71 IRQ_TYPE_LEVEL_HIGH
 			      0 72 IRQ_TYPE_LEVEL_HIGH
 			      0 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
 		status = "disabled";
 	};
 
@@ -160,6 +175,8 @@
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c40000 0x100>;
 		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
+		clock-names = "sci_ick";
 		status = "disabled";
 	};
 
@@ -167,6 +184,8 @@
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c50000 0x100>;
 		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
+		clock-names = "sci_ick";
 		status = "disabled";
 	};
 
@@ -174,6 +193,8 @@
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c60000 0x100>;
 		interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
+		clock-names = "sci_ick";
 		status = "disabled";
 	};
 
@@ -181,6 +202,8 @@
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c70000 0x100>;
 		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
+		clock-names = "sci_ick";
 		status = "disabled";
 	};
 
@@ -188,6 +211,8 @@
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c80000 0x100>;
 		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
+		clock-names = "sci_ick";
 		status = "disabled";
 	};
 
@@ -195,6 +220,8 @@
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6cb0000 0x100>;
 		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
+		clock-names = "sci_ick";
 		status = "disabled";
 	};
 
@@ -202,6 +229,8 @@
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6cc0000 0x100>;
 		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
+		clock-names = "sci_ick";
 		status = "disabled";
 	};
 
@@ -209,6 +238,8 @@
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6cd0000 0x100>;
 		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
+		clock-names = "sci_ick";
 		status = "disabled";
 	};
 
@@ -216,6 +247,8 @@
 		compatible = "renesas,scifb-r8a7740", "renesas,scifb";
 		reg = <0xe6c30000 0x100>;
 		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+		clock-names = "sci_ick";
 		status = "disabled";
 	};
 
@@ -239,6 +272,7 @@
 	tpu: pwm@e6600000 {
 		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
 		reg = <0xe6600000 0x100>;
+		clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
 		status = "disabled";
 		#pwm-cells = <3>;
 	};
@@ -248,6 +282,7 @@
 		reg = <0xe6bd0000 0x100>;
 		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
 			      0 57 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_MMC>;
 		status = "disabled";
 	};
 
@@ -257,6 +292,7 @@
 		interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
 			      0 118 IRQ_TYPE_LEVEL_HIGH
 			      0 119 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
 		status = "disabled";
@@ -268,6 +304,7 @@
 		interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
 			      0 122 IRQ_TYPE_LEVEL_HIGH
 			      0 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
 		status = "disabled";
@@ -279,6 +316,7 @@
 		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
 			      0 126 IRQ_TYPE_LEVEL_HIGH
 			      0 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
 		status = "disabled";
@@ -289,6 +327,186 @@
 		compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
 		reg = <0xfe1f0000 0x400>;
 		interrupts = <0 9 0x4>;
+		clocks = <&mstp3_clks R8A7740_CLK_FSI>;
 		status = "disabled";
 	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* External root clock */
+		extalr_clk: extalr_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "extalr";
+		};
+		extal1_clk: extal1_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "extal1";
+		};
+		extal2_clk: extal2_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "extal2";
+		};
+		dv_clk: dv_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+			clock-output-names = "dv";
+		};
+		fsiack_clk: fsiack_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "fsiack";
+		};
+		fsibck_clk: fsibck_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "fsibck";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,r8a7740-cpg-clocks";
+			reg = <0xe6150000 0x10000>;
+			clocks = <&extal1_clk>, <&extalr_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "system", "pllc0", "pllc1",
+					     "pllc2", "r",
+					     "usb24s",
+					     "i", "zg", "b", "m1", "hp",
+					     "hpp", "usbp", "s", "zb", "m3",
+					     "cp";
+		};
+
+		/* Variable factor clocks (DIV6) */
+		sub_clk: sub_clk@e6150080 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150080 4>;
+			clocks = <&pllc1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sub";
+		};
+
+		/* Fixed factor clocks */
+		pllc1_div2_clk: pllc1_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7740_CLK_PLLC1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "pllc1_div2";
+		};
+		extal1_div2_clk: extal1_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&extal1_clk>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "extal1_div2";
+		};
+
+		/* Gate clocks */
+		subck_clks: subck_clks@e6150080 {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150080 4>;
+			clocks = <&sub_clk>, <&sub_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2
+			>;
+			clock-output-names =
+				"subck", "subck2";
+		};
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150134 4>, <0xe6150038 4>;
+			clocks = <&cpg_clocks R8A7740_CLK_S>,
+				 <&cpg_clocks R8A7740_CLK_S>, <&sub_clk>,
+				 <&cpg_clocks R8A7740_CLK_B>,
+				 <&sub_clk>, <&sub_clk>,
+				 <&cpg_clocks R8A7740_CLK_B>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0
+				R8A7740_CLK_LCDC1 R8A7740_CLK_IIC0 R8A7740_CLK_TMU1
+				R8A7740_CLK_LCDC0
+			>;
+			clock-output-names =
+				"ceu21", "ceu20", "tmu0", "lcdc1", "iic0",
+				"tmu1", "lcdc0";
+		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150138 4>, <0xe6150040 4>;
+			clocks = <&sub_clk>, <&sub_clk>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7740_CLK_SCIFA6 R8A7740_CLK_SCIFA7
+				R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2
+				R8A7740_CLK_DMAC3 R8A7740_CLK_USBDMAC
+				R8A7740_CLK_SCIFA5 R8A7740_CLK_SCIFB
+				R8A7740_CLK_SCIFA0 R8A7740_CLK_SCIFA1
+				R8A7740_CLK_SCIFA2 R8A7740_CLK_SCIFA3
+				R8A7740_CLK_SCIFA4
+			>;
+			clock-output-names =
+				"scifa6", "scifa7", "dmac1", "dmac2", "dmac3",
+				"usbdmac", "scifa5", "scifb", "scifa0", "scifa1",
+				"scifa2", "scifa3", "scifa4";
+		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe615013c 4>, <0xe6150048 4>;
+			clocks = <&cpg_clocks R8A7740_CLK_R>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&sub_clk>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1
+				R8A7740_CLK_USBF R8A7740_CLK_SDHI0 R8A7740_CLK_SDHI1
+				R8A7740_CLK_MMC R8A7740_CLK_GETHER R8A7740_CLK_TPU0
+			>;
+			clock-output-names =
+				"cmt1", "fsi", "iic1", "usbf", "sdhi0", "sdhi1",
+				"mmc", "gether", "tpu0";
+		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150140 4>, <0xe615004c 4>;
+			clocks = <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7740_CLK_USBH R8A7740_CLK_SDHI2
+				R8A7740_CLK_USBFUNC R8A7740_CLK_USBPHY
+			>;
+			clock-output-names =
+				"usbhost", "sdhi2", "usbfunc", "usphy";
+		};
+	};
 };

arch/arm/boot/dts/r8a7778.dtsi

@@ -23,8 +23,14 @@
 	interrupt-parent = <&gic>;
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <800000000>;
 		};
 	};
 

arch/arm/boot/dts/r8a7779-marzen.dts

@@ -78,6 +78,10 @@
 	clock-frequency = <31250000>;
 };
 
+&tmu0 {
+	status = "okay";
+};
+
 &pfc {
 	lan0_pins: lan0 {
 		intc {

arch/arm/boot/dts/r8a7779.dtsi

@@ -266,6 +266,48 @@
 		reg = <0xffc48000 0x38>;
 	};
 
+	tmu0: timer@ffd80000 {
+		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+		reg = <0xffd80000 0x30>;
+		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+		clock-names = "fck";
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	tmu1: timer@ffd81000 {
+		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+		reg = <0xffd81000 0x30>;
+		interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
+		clock-names = "fck";
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	tmu2: timer@ffd82000 {
+		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+		reg = <0xffd82000 0x30>;
+		interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
+		clock-names = "fck";
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
 	sata: sata@fc600000 {
 		compatible = "renesas,rcar-sata";
 		reg = <0xfc600000 0x2000>;

arch/arm/boot/dts/r8a7790-lager.dts

@@ -252,6 +252,10 @@
 	};
 };
 
+&cmt0 {
+	status = "ok";
+};
+
 &mmcif1 {
 	pinctrl-0 = <&mmc1_pins>;
 	pinctrl-names = "default";

arch/arm/boot/dts/r8a7790.dtsi

@@ -206,6 +206,38 @@
 			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	cmt0: timer@ffca0000 {
+		compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
+		reg = <0 0xffca0000 0 0x1004>;
+		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0x60>;
+
+		status = "disabled";
+	};
+
+	cmt1: timer@e6130000 {
+		compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
+		reg = <0 0xe6130000 0 0x1004>;
+		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0xff>;
+
+		status = "disabled";
+	};
+
 	irqc0: interrupt-controller@e61c0000 {
 		compatible = "renesas,irqc-r8a7790", "renesas,irqc";
 		#interrupt-cells = <2>;

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -302,6 +302,10 @@
 	};
 };
 
+&cmt0 {
+	status = "ok";
+};
+
 &sata0 {
 	status = "okay";
 };

arch/arm/boot/dts/r8a7791.dtsi

@@ -189,6 +189,38 @@
 			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	cmt0: timer@ffca0000 {
+		compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
+		reg = <0 0xffca0000 0 0x1004>;
+		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0x60>;
+
+		status = "disabled";
+	};
+
+	cmt1: timer@e6130000 {
+		compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
+		reg = <0 0xe6130000 0 0x1004>;
+		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0xff>;
+
+		status = "disabled";
+	};
+
 	irqc0: interrupt-controller@e61c0000 {
 		compatible = "renesas,irqc-r8a7791", "renesas,irqc";
 		#interrupt-cells = <2>;

arch/arm/boot/dts/sh7372.dtsi

@@ -21,6 +21,7 @@
 			compatible = "arm,cortex-a8";
 			device_type = "cpu";
 			reg = <0x0>;
+			clock-frequency = <800000000>;
 		};
 	};
 

arch/arm/boot/dts/sh73a0-kzm9g-reference.dts

@@ -173,6 +173,10 @@
 	};
 };
 
+&cmt1 {
+	status = "ok";
+};
+
 &i2c0 {
 	status = "okay";
 	as3711@40 {

arch/arm/boot/dts/sh73a0.dtsi

@@ -23,11 +23,13 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			clock-frequency = <1196000000>;
 		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			clock-frequency = <1196000000>;
 		};
 	};
 
@@ -45,6 +47,16 @@
 			     <0 56 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	cmt1: timer@e6138000 {
+		compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48";
+		reg = <0xe6138000 0x200>;
+		interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+
+		renesas,channels-mask = <0x3f>;
+
+		status = "disabled";
+	};
+
 	irqpin0: irqpin@e6900000 {
 		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;

arch/arm/boot/dts/zynq-7000.dtsi

@@ -146,6 +146,11 @@
 			cache-level = <2>;
 		};
 
+		memory-controller@f8006000 {
+			compatible = "xlnx,zynq-ddrc-a05";
+			reg = <0xf8006000 0x1000>;
+		} ;
+
 		uart0: serial@e0000000 {
 			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 			status = "disabled";

arch/arm/configs/clps711x_defconfig

@@ -68,8 +68,8 @@ CONFIG_GPIO_GENERIC_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CLPS711X=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_PWM=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -77,6 +77,8 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_PWM_CLPS711X=y
 CONFIG_EXT2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_MINIX_FS=y

arch/arm/configs/hi3xxx_defconfig → arch/arm/configs/hisi_defconfig

@@ -6,10 +6,15 @@ CONFIG_RD_LZMA=y
 CONFIG_ARCH_HISI=y
 CONFIG_ARCH_HI3xxx=y
 CONFIG_ARCH_HIX5HD2=y
+CONFIG_ARCH_HIP04=y
 CONFIG_SMP=y
+CONFIG_NR_CPUS=16
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
 CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
@@ -21,6 +26,12 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_NETDEVICES=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
@@ -56,3 +67,5 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOCKUP_DETECTOR=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y

arch/arm/configs/imx_v4_v5_defconfig

@@ -21,7 +21,6 @@ CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXC=y
-CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
@@ -38,8 +37,6 @@ CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -58,6 +55,7 @@ CONFIG_NETFILTER=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_IMX_WEIM=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -73,8 +71,8 @@ CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
-CONFIG_ATA=y
 CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
 CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
 CONFIG_CS89x0=y
@@ -97,10 +95,8 @@ CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
-CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_GPIO_SYSFS=y
@@ -127,10 +123,7 @@ CONFIG_VIDEO_CODA=y
 CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_FB=y
 CONFIG_FB_IMX=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y

arch/arm/configs/imx_v6_v7_defconfig

@@ -32,8 +32,8 @@ CONFIG_MACH_IMX35_DT=y
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_VPR200=y
-CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX50=y
+CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
@@ -105,7 +105,6 @@ CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
@@ -153,14 +152,12 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_FSL_LPUART=y
 CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MXC_RNGA=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
 CONFIG_I2C_IMX=y
-CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MC9S08DZ60=y
@@ -198,7 +195,6 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_GPIO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -206,6 +202,7 @@ CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
+CONFIG_SND_SOC_FSL_SAI=y
 CONFIG_SND_IMX_SOC=y
 CONFIG_SND_SOC_PHYCORE_AC97=y
 CONFIG_SND_SOC_EUKREA_TLV320=y
@@ -213,6 +210,7 @@ CONFIG_SND_SOC_IMX_WM8962=y
 CONFIG_SND_SOC_IMX_SGTL5000=y
 CONFIG_SND_SOC_IMX_SPDIF=y
 CONFIG_SND_SOC_IMX_MC13783=y
+CONFIG_SND_SIMPLE_CARD=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
@@ -240,6 +238,7 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
@@ -254,7 +253,6 @@ CONFIG_DRM_IMX_FB_HELPER=y
 CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
 CONFIG_DRM_IMX_TVE=y
 CONFIG_DRM_IMX_LDB=y
-CONFIG_DRM_IMX_IPUV3_CORE=y
 CONFIG_DRM_IMX_IPUV3=y
 CONFIG_DRM_IMX_HDMI=y
 # CONFIG_IOMMU_SUPPORT is not set

arch/arm/configs/multi_v7_defconfig

@@ -28,6 +28,7 @@ CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_HISI=y
 CONFIG_ARCH_HI3xxx=y
 CONFIG_ARCH_HIX5HD2=y
+CONFIG_ARCH_HIP04=y
 CONFIG_ARCH_KEYSTONE=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX51=y

arch/arm/configs/omap2plus_defconfig

 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
@@ -32,19 +49,26 @@ CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
-CONFIG_CACHE_L2X0=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_CMA=y
+CONFIG_SECCOMP=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
 CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_GENERIC_CPUFREQ_CPU0=y
+# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
 CONFIG_CPU_IDLE=y
 CONFIG_BINFMT_MISC=y
 CONFIG_PM_DEBUG=y
@@ -61,7 +85,7 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
 CONFIG_NETFILTER=y
 CONFIG_CAN=m
 CONFIG_CAN_C_CAN=m
@@ -75,9 +99,6 @@ CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMA_CMA=y
@@ -101,9 +122,9 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_SENSORS_TSL2550=m
 CONFIG_BMP085_I2C=m
 CONFIG_SENSORS_LIS3_I2C=m
+CONFIG_SRAM=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_MD=y
 CONFIG_NETDEVICES=y
@@ -138,7 +159,9 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_MATRIX=m
 CONFIG_KEYBOARD_TWL4030=y
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_TSC2005=m
+CONFIG_TOUCHSCREEN_TSC2007=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
 # CONFIG_LEGACY_PTYS is not set
@@ -162,7 +185,13 @@ CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_TWL4030=y
 CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
+CONFIG_BATTERY_BQ27x00=m
+CONFIG_CHARGER_ISP1704=m
+CONFIG_CHARGER_TWL4030=m
+CONFIG_CHARGER_BQ2415X=m
+CONFIG_CHARGER_BQ24190=m
+CONFIG_CHARGER_BQ24735=m
+CONFIG_POWER_RESET=y
 CONFIG_POWER_AVS=y
 CONFIG_SENSORS_LM75=m
 CONFIG_THERMAL=y
@@ -183,8 +212,8 @@ CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65218=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_PBIAS=y
 CONFIG_REGULATOR_TI_ABB=y
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
@@ -192,12 +221,12 @@ CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65218=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
-CONFIG_REGULATOR_PBIAS=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_OMAP2_DSS=m
+CONFIG_OMAP5_DSS_HDMI=y
 CONFIG_OMAP2_DSS_SDI=y
 CONFIG_OMAP2_DSS_DSI=y
 CONFIG_FB_OMAP2=m
@@ -205,11 +234,25 @@ CONFIG_DISPLAY_ENCODER_TFP410=m
 CONFIG_DISPLAY_ENCODER_TPD12S015=m
 CONFIG_DISPLAY_CONNECTOR_DVI=m
 CONFIG_DISPLAY_CONNECTOR_HDMI=m
+CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
 CONFIG_DISPLAY_PANEL_DPI=m
+CONFIG_DISPLAY_PANEL_DSI_CM=m
+CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
+CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
+CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
+CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
+CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_PANDORA=m
+CONFIG_BACKLIGHT_GPIO=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
@@ -221,8 +264,6 @@ CONFIG_SND_DEBUG=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_OMAP_SOC=m
-CONFIG_SND_AM33XX_SOC_EVM=m
-CONFIG_SND_DAVINCI_SOC=m
 CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
 CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
@@ -233,9 +274,6 @@ CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=m
 CONFIG_USB_TEST=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_OMAP_USB2=y
-CONFIG_TI_PIPE3=y
 CONFIG_AM335X_PHY_USB=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
@@ -243,7 +281,6 @@ CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
 CONFIG_USB_ZERO=m
 CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_SDIO_UART=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
@@ -267,15 +304,23 @@ CONFIG_TI_EDMA=y
 CONFIG_DMA_OMAP=y
 CONFIG_EXTCON=y
 CONFIG_EXTCON_PALMAS=y
+CONFIG_PWM=y
+CONFIG_PWM_TWL=y
+CONFIG_PWM_TWL_LED=y
+CONFIG_OMAP_USB2=y
+CONFIG_TI_PIPE3=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y

arch/arm/configs/sama5_defconfig

@@ -19,6 +19,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAM_V7=y
 CONFIG_SOC_SAMA5D3=y
+CONFIG_SOC_SAMA5D4=y
 CONFIG_MACH_SAMA5_DT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set

arch/arm/include/asm/mcpm.h

@@ -20,7 +20,12 @@
  * to consider dynamic allocation.
  */
 #define MAX_CPUS_PER_CLUSTER	4
+
+#ifdef CONFIG_MCPM_QUAD_CLUSTER
+#define MAX_NR_CLUSTERS		4
+#else
 #define MAX_NR_CLUSTERS		2
+#endif
 
 #ifndef __ASSEMBLY__
 

arch/arm/include/debug/bcm63xx.S

+/*
+ * Broadcom BCM63xx low-level UART debug
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_bcm63xx.h>
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT
+	.endm
+
+	.macro	senduart, rd, rx
+	/* word access do not work */
+	strb	\rd, [\rx, #UART_FIFO_REG]
+	.endm
+
+	.macro	waituart, rd, rx
+1001:	ldr	\rd, [\rx, #UART_IR_REG]
+	tst	\rd, #(1 << UART_IR_TXEMPTY)
+	beq	1001b
+	.endm
+
+	.macro	busyuart, rd, rx
+1002:	ldr	\rd, [\rx, #UART_IR_REG]
+	tst	\rd, #(1 << UART_IR_TXTRESH)
+	beq	1002b
+	.endm

arch/arm/include/debug/meson.S

+/*
+ * Copyright (C) 2014 Carlo Caione
+ * Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define MESON_AO_UART_WFIFO		0x0
+#define MESON_AO_UART_STATUS		0xc
+
+#define MESON_AO_UART_TX_FIFO_EMPTY	(1 << 22)
+#define MESON_AO_UART_TX_FIFO_FULL	(1 << 21)
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =(CONFIG_DEBUG_UART_PHYS)		@ physical
+	ldr	\rv, =(CONFIG_DEBUG_UART_VIRT)		@ virtual
+	.endm
+
+	.macro	senduart,rd,rx
+	str	\rd, [\rx, #MESON_AO_UART_WFIFO]
+	.endm
+
+	.macro	busyuart,rd,rx
+1002:	ldr	\rd, [\rx, #MESON_AO_UART_STATUS]
+	tst	\rd, #MESON_AO_UART_TX_FIFO_EMPTY
+	beq	1002b
+	.endm
+
+	.macro	waituart,rd,rx
+1001:	ldr	\rd, [\rx, #MESON_AO_UART_STATUS]
+	tst	\rd, #MESON_AO_UART_TX_FIFO_FULL
+	bne	1001b
+	.endm

arch/arm/mach-at91/Kconfig

@@ -12,6 +12,9 @@ config HAVE_AT91_DBGU0
 config HAVE_AT91_DBGU1
 	bool
 
+config HAVE_AT91_DBGU2
+	bool
+
 config AT91_USE_OLD_CLK
 	bool
 
@@ -47,6 +50,9 @@ config AT91_SAM9_TIME
 config HAVE_AT91_SMD
 	bool
 
+config HAVE_AT91_H32MX
+	bool
+
 config SOC_AT91SAM9
 	bool
 	select AT91_SAM9_TIME
@@ -105,6 +111,21 @@ config SOC_SAMA5D3
 	help
 	  Select this if you are using one of Atmel's SAMA5D3 family SoC.
 	  This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
+
+config SOC_SAMA5D4
+	bool "SAMA5D4 family"
+	select SOC_SAMA5
+	select HAVE_AT91_DBGU2
+	select CLKSRC_MMIO
+	select CACHE_L2X0
+	select CACHE_PL310
+	select HAVE_FB_ATMEL
+	select HAVE_AT91_UTMI
+	select HAVE_AT91_SMD
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_H32MX
+	help
+	  Select this if you are using one of Atmel's SAMA5D4 family SoC.
 endif
 
 if SOC_SAM_V4_V5

arch/arm/mach-at91/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_SOC_AT91SAM9N12)	+= at91sam9n12.o
 obj-$(CONFIG_SOC_AT91SAM9X5)	+= at91sam9x5.o
 obj-$(CONFIG_SOC_AT91SAM9RL)	+= at91sam9rl.o
 obj-$(CONFIG_SOC_SAMA5D3)	+= sama5d3.o
+obj-$(CONFIG_SOC_SAMA5D4)	+= sama5d4.o
 
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260_devices.o

arch/arm/mach-at91/board-dt-sama5.c

@@ -62,7 +62,7 @@ static void __init sama5_dt_device_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char *sama5_dt_board_compat[] __initdata = {
+static const char *sama5_dt_board_compat[] __initconst = {
 	"atmel,sama5",
 	NULL
 };
@@ -75,3 +75,17 @@ DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
 	.init_machine	= sama5_dt_device_init,
 	.dt_compat	= sama5_dt_board_compat,
 MACHINE_END
+
+static const char *sama5_alt_dt_board_compat[] __initconst = {
+	"atmel,sama5d4",
+	NULL
+};
+
+DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5 (Device Tree)")
+	/* Maintainer: Atmel */
+	.map_io		= at91_alt_map_io,
+	.init_early	= at91_dt_initialize,
+	.init_machine	= sama5_dt_device_init,
+	.dt_compat	= sama5_alt_dt_board_compat,
+	.l2c_aux_mask	= ~0UL,
+MACHINE_END

arch/arm/mach-at91/generic.h

@@ -14,6 +14,7 @@
 
  /* Map io */
 extern void __init at91_map_io(void);
+extern void __init at91_alt_map_io(void);
 extern void __init at91_init_sram(int bank, unsigned long base,
 				  unsigned int length);
 

arch/arm/mach-at91/include/mach/cpu.h

@@ -36,7 +36,7 @@
 #define ARCH_ID_AT91M40807	0x14080745
 #define ARCH_ID_AT91R40008	0x44000840
 
-#define ARCH_ID_SAMA5D3		0x8A5C07C0
+#define ARCH_ID_SAMA5		0x8A5C07C0
 
 #define ARCH_EXID_AT91SAM9M11	0x00000001
 #define ARCH_EXID_AT91SAM9M10	0x00000002
@@ -49,12 +49,19 @@
 #define ARCH_EXID_AT91SAM9G25	0x00000003
 #define ARCH_EXID_AT91SAM9X25	0x00000004
 
+#define ARCH_EXID_SAMA5D3	0x00004300
 #define ARCH_EXID_SAMA5D31	0x00444300
 #define ARCH_EXID_SAMA5D33	0x00414300
 #define ARCH_EXID_SAMA5D34	0x00414301
 #define ARCH_EXID_SAMA5D35	0x00584300
 #define ARCH_EXID_SAMA5D36	0x00004301
 
+#define ARCH_EXID_SAMA5D4	0x00000007
+#define ARCH_EXID_SAMA5D41	0x00000001
+#define ARCH_EXID_SAMA5D42	0x00000002
+#define ARCH_EXID_SAMA5D43	0x00000003
+#define ARCH_EXID_SAMA5D44	0x00000004
+
 #define ARCH_FAMILY_AT91X92	0x09200000
 #define ARCH_FAMILY_AT91SAM9	0x01900000
 #define ARCH_FAMILY_AT91SAM9XE	0x02900000
@@ -86,6 +93,9 @@ enum at91_soc_type {
 	/* SAMA5D3 */
 	AT91_SOC_SAMA5D3,
 
+	/* SAMA5D4 */
+	AT91_SOC_SAMA5D4,
+
 	/* Unknown type */
 	AT91_SOC_UNKNOWN,
 };
@@ -108,6 +118,10 @@ enum at91_soc_subtype {
 	AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34,
 	AT91_SOC_SAMA5D35, AT91_SOC_SAMA5D36,
 
+	/* SAMA5D4 */
+	AT91_SOC_SAMA5D41, AT91_SOC_SAMA5D42, AT91_SOC_SAMA5D43,
+	AT91_SOC_SAMA5D44,
+
 	/* No subtype for this SoC */
 	AT91_SOC_SUBTYPE_NONE,
 
@@ -211,6 +225,12 @@ static inline int at91_soc_is_detected(void)
 #define cpu_is_sama5d3()	(0)
 #endif
 
+#ifdef CONFIG_SOC_SAMA5D4
+#define cpu_is_sama5d4()	(at91_soc_initdata.type == AT91_SOC_SAMA5D4)
+#else
+#define cpu_is_sama5d4()	(0)
+#endif
+
 /*
  * Since this is ARM, we will never run on any AVR32 CPU. But these
  * definitions may reduce clutter in common drivers.

arch/arm/mach-at91/include/mach/debug-macro.S

@@ -16,8 +16,11 @@
 
 #if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
 #define AT91_DBGU AT91_BASE_DBGU0
-#else
+#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1)
 #define AT91_DBGU AT91_BASE_DBGU1
+#else
+/* On sama5d4, use USART3 as low level serial console */
+#define AT91_DBGU SAMA5D4_BASE_USART3
 #endif
 
 	.macro	addruart, rp, rv, tmp

arch/arm/mach-at91/include/mach/hardware.h

@@ -19,8 +19,10 @@
 /* DBGU base */
 /* rm9200, 9260/9g20, 9261/9g10, 9rl */
 #define AT91_BASE_DBGU0	0xfffff200
-/* 9263, 9g45 */
+/* 9263, 9g45, sama5d3 */
 #define AT91_BASE_DBGU1	0xffffee00
+/* sama5d4 */
+#define AT91_BASE_DBGU2	0xfc069000
 
 #if defined(CONFIG_ARCH_AT91X40)
 #include <mach/at91x40.h>
@@ -34,6 +36,7 @@
 #include <mach/at91sam9x5.h>
 #include <mach/at91sam9n12.h>
 #include <mach/sama5d3.h>
+#include <mach/sama5d4.h>
 
 /*
  * On all at91 except rm9200 and x40 have the System Controller starts
@@ -47,8 +50,14 @@
  * and map the same memory space
  */
 #define AT91_BASE_SYS	0xffffc000
+
 #endif
 
+/*
+ * On sama5d4 there is no system controller, we map some needed peripherals
+ */
+#define AT91_ALT_BASE_SYS	0xfc069000
+
 /*
  * On all at91 have the Advanced Interrupt Controller starts at address
  * 0xfffff000 and the Power Management Controller starts at 0xfffffc00
@@ -69,23 +78,35 @@
  */
 #define AT91_IO_PHYS_BASE	0xFFF78000
 #define AT91_IO_VIRT_BASE	IOMEM(0xFF000000 - AT91_IO_SIZE)
+
+/*
+ * On sama5d4, remap the peripherals from address 0xFC069000 .. 0xFC06F000
+ * to 0xFB069000 .. 0xFB06F000.  (24Kb)
+ */
+#define AT91_ALT_IO_PHYS_BASE	AT91_ALT_BASE_SYS
+#define AT91_ALT_IO_VIRT_BASE	IOMEM(0xFB069000)
 #else
 /*
  * Identity mapping for the non MMU case.
  */
 #define AT91_IO_PHYS_BASE	AT91_BASE_SYS
 #define AT91_IO_VIRT_BASE	IOMEM(AT91_IO_PHYS_BASE)
+
+#define AT91_ALT_IO_PHYS_BASE	AT91_ALT_BASE_SYS
+#define AT91_ALT_IO_VIRT_BASE	IOMEM(AT91_ALT_BASE_SYS)
 #endif
 
 #define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
 
  /* Convert a physical IO address to virtual IO address */
 #define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+#define AT91_ALT_IO_P2V(x)	((x) - AT91_ALT_IO_PHYS_BASE + AT91_ALT_IO_VIRT_BASE)
 
 /*
  * Virtual to Physical Address mapping for IO devices.
  */
 #define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
+#define AT91_ALT_VA_BASE_SYS	AT91_ALT_IO_P2V(AT91_ALT_BASE_SYS)
 
  /* Internal SRAM is mapped below the IO devices */
 #define AT91_SRAM_MAX		SZ_1M

arch/arm/mach-at91/include/mach/sama5d4.h

+/*
+ * Chip-specific header file for the SAMA5D4 family
+ *
+ *  Copyright (C) 2013 Atmel Corporation,
+ *                     Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Common definitions.
+ * Based on SAMA5D4 datasheet.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef SAMA5D4_H
+#define SAMA5D4_H
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define SAMA5D4_BASE_USART3	0xfc00c000 /* (USART3 non-secure) Base Address */
+#define SAMA5D4_BASE_PMC	0xf0018000 /* (PMC) Base Address */
+#define SAMA5D4_BASE_MPDDRC	0xf0010000 /* (MPDDRC) Base Address */
+#define SAMA5D4_BASE_PIOD	0xfc068000 /* (PIOD) Base Address */
+
+/* Some other peripherals */
+#define SAMA5D4_BASE_SYS2	SAMA5D4_BASE_PIOD
+
+/*
+ * Internal Memory.
+ */
+#define SAMA5D4_NS_SRAM_BASE     0x00210000      /* Internal SRAM base address Non-Secure */
+#define SAMA5D4_NS_SRAM_SIZE     (64 * SZ_1K)   /* Internal SRAM size Non-Secure part (64Kb) */
+
+#endif

arch/arm/mach-at91/include/mach/uncompress.h

@@ -94,7 +94,7 @@ static const u32 uarts_sam9x5[] = {
 	0,
 };
 
-static const u32 uarts_sama5[] = {
+static const u32 uarts_sama5d3[] = {
 	AT91_BASE_DBGU1,
 	SAMA5D3_BASE_USART0,
 	SAMA5D3_BASE_USART1,
@@ -103,6 +103,12 @@ static const u32 uarts_sama5[] = {
 	0,
 };
 
+static const u32 uarts_sama5d4[] = {
+	AT91_BASE_DBGU2,
+	SAMA5D4_BASE_USART3,
+	0,
+};
+
 static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 {
 	u32 cidr, socid;
@@ -134,8 +140,14 @@ static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 	case ARCH_ID_AT91SAM9X5:
 		return uarts_sam9x5;
 
-	case ARCH_ID_SAMA5D3:
-		return uarts_sama5;
+	case ARCH_ID_SAMA5:
+		cidr = __raw_readl(dbgu_base + AT91_DBGU_EXID);
+		if (cidr & ARCH_EXID_SAMA5D3)
+			return uarts_sama5d3;
+		else if (cidr & ARCH_EXID_SAMA5D4)
+			return uarts_sama5d4;
+
+		break;
 	}
 
 	/* at91sam9g10 */
@@ -156,9 +168,10 @@ static inline void arch_decomp_setup(void)
 	const u32* usarts;
 
 	usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0);
-
 	if (!usarts)
 		usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1);
+	if (!usarts)
+		usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU2);
 	if (!usarts) {
 		at91_uart = NULL;
 		return;

arch/arm/mach-at91/sama5d4.c

+/*
+ *  Chip-specific setup code for the SAMA5D4 family
+ *
+ *  Copyright (C) 2013 Atmel Corporation,
+ *                     Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/sama5d4.h>
+#include <mach/cpu.h>
+#include <mach/hardware.h>
+
+#include "soc.h"
+#include "generic.h"
+#include "sam9_smc.h"
+
+/* --------------------------------------------------------------------
+ *  Processor initialization
+ * -------------------------------------------------------------------- */
+static struct map_desc at91_io_desc[] __initdata = {
+	{
+	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
+	.pfn            = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
+	.length         = SZ_512,
+	.type           = MT_DEVICE,
+	},
+	{
+	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
+	.pfn            = __phys_to_pfn(SAMA5D4_BASE_PMC),
+	.length         = SZ_512,
+	.type           = MT_DEVICE,
+	},
+	{ /* On sama5d4, we use USART3 as serial console */
+	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
+	.pfn            = __phys_to_pfn(SAMA5D4_BASE_USART3),
+	.length         = SZ_256,
+	.type           = MT_DEVICE,
+	},
+	{ /* A bunch of peripheral with fine grained IO space */
+	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
+	.pfn            = __phys_to_pfn(SAMA5D4_BASE_SYS2),
+	.length         = SZ_2K,
+	.type           = MT_DEVICE,
+	},
+};
+
+
+static void __init sama5d4_map_io(void)
+{
+	iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
+	at91_init_sram(0, SAMA5D4_NS_SRAM_BASE, SAMA5D4_NS_SRAM_SIZE);
+}
+
+AT91_SOC_START(sama5d4)
+	.map_io = sama5d4_map_io,
+AT91_SOC_END

arch/arm/mach-at91/setup.c

@@ -97,6 +97,13 @@ static struct map_desc at91_io_desc __initdata __maybe_unused = {
 	.type		= MT_DEVICE,
 };
 
+static struct map_desc at91_alt_io_desc __initdata __maybe_unused = {
+	.virtual	= (unsigned long)AT91_ALT_VA_BASE_SYS,
+	.pfn		= __phys_to_pfn(AT91_ALT_BASE_SYS),
+	.length		= 24 * SZ_1K,
+	.type		= MT_DEVICE,
+};
+
 static void __init soc_detect(u32 dbgu_base)
 {
 	u32 cidr, socid;
@@ -159,9 +166,12 @@ static void __init soc_detect(u32 dbgu_base)
 		at91_boot_soc = at91sam9n12_soc;
 		break;
 
-	case ARCH_ID_SAMA5D3:
-		at91_soc_initdata.type = AT91_SOC_SAMA5D3;
-		at91_boot_soc = sama5d3_soc;
+	case ARCH_ID_SAMA5:
+		at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
+		if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
+			at91_soc_initdata.type = AT91_SOC_SAMA5D3;
+			at91_boot_soc = sama5d3_soc;
+		}
 		break;
 	}
 
@@ -184,7 +194,8 @@ static void __init soc_detect(u32 dbgu_base)
 	at91_soc_initdata.cidr = cidr;
 
 	/* sub version of soc */
-	at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
+	if (!at91_soc_initdata.exid)
+		at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
 
 	if (at91_soc_initdata.type == AT91_SOC_SAM9G45) {
 		switch (at91_soc_initdata.exid) {
@@ -241,6 +252,54 @@ static void __init soc_detect(u32 dbgu_base)
 	}
 }
 
+static void __init alt_soc_detect(u32 dbgu_base)
+{
+	u32 cidr, socid;
+
+	/* SoC ID */
+	cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
+	socid = cidr & ~AT91_CIDR_VERSION;
+
+	switch (socid) {
+	case ARCH_ID_SAMA5:
+		at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
+		if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
+			at91_soc_initdata.type = AT91_SOC_SAMA5D3;
+			at91_boot_soc = sama5d3_soc;
+		} else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) {
+			at91_soc_initdata.type = AT91_SOC_SAMA5D4;
+			at91_boot_soc = sama5d4_soc;
+		}
+		break;
+	}
+
+	if (!at91_soc_is_detected())
+		return;
+
+	at91_soc_initdata.cidr = cidr;
+
+	/* sub version of soc */
+	if (!at91_soc_initdata.exid)
+		at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
+
+	if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) {
+		switch (at91_soc_initdata.exid) {
+		case ARCH_EXID_SAMA5D41:
+			at91_soc_initdata.subtype = AT91_SOC_SAMA5D41;
+			break;
+		case ARCH_EXID_SAMA5D42:
+			at91_soc_initdata.subtype = AT91_SOC_SAMA5D42;
+			break;
+		case ARCH_EXID_SAMA5D43:
+			at91_soc_initdata.subtype = AT91_SOC_SAMA5D43;
+			break;
+		case ARCH_EXID_SAMA5D44:
+			at91_soc_initdata.subtype = AT91_SOC_SAMA5D44;
+			break;
+		}
+	}
+}
+
 static const char *soc_name[] = {
 	[AT91_SOC_RM9200]	= "at91rm9200",
 	[AT91_SOC_SAM9260]	= "at91sam9260",
@@ -253,6 +312,7 @@ static const char *soc_name[] = {
 	[AT91_SOC_SAM9X5]	= "at91sam9x5",
 	[AT91_SOC_SAM9N12]	= "at91sam9n12",
 	[AT91_SOC_SAMA5D3]	= "sama5d3",
+	[AT91_SOC_SAMA5D4]	= "sama5d4",
 	[AT91_SOC_UNKNOWN]	= "Unknown",
 };
 
@@ -280,6 +340,10 @@ static const char *soc_subtype_name[] = {
 	[AT91_SOC_SAMA5D34]	= "sama5d34",
 	[AT91_SOC_SAMA5D35]	= "sama5d35",
 	[AT91_SOC_SAMA5D36]	= "sama5d36",
+	[AT91_SOC_SAMA5D41]	= "sama5d41",
+	[AT91_SOC_SAMA5D42]	= "sama5d42",
+	[AT91_SOC_SAMA5D43]	= "sama5d43",
+	[AT91_SOC_SAMA5D44]	= "sama5d44",
 	[AT91_SOC_SUBTYPE_NONE]	= "None",
 	[AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
 };
@@ -342,6 +406,31 @@ void __init at91_ioremap_rstc(u32 base_addr)
 		panic("Impossible to ioremap at91_rstc_base\n");
 }
 
+void __init at91_alt_map_io(void)
+{
+	/* Map peripherals */
+	iotable_init(&at91_alt_io_desc, 1);
+
+	at91_soc_initdata.type = AT91_SOC_UNKNOWN;
+	at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
+
+	alt_soc_detect(AT91_BASE_DBGU2);
+	if (!at91_soc_is_detected())
+		panic("AT91: Impossible to detect the SOC type");
+
+	pr_info("AT91: Detected soc type: %s\n",
+		at91_get_soc_type(&at91_soc_initdata));
+	if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
+		pr_info("AT91: Detected soc subtype: %s\n",
+			at91_get_soc_subtype(&at91_soc_initdata));
+
+	if (!at91_soc_is_enabled())
+		panic("AT91: Soc not enabled");
+
+	if (at91_boot_soc.map_io)
+		at91_boot_soc.map_io();
+}
+
 void __iomem *at91_matrix_base;
 EXPORT_SYMBOL_GPL(at91_matrix_base);
 

arch/arm/mach-at91/soc.h

@@ -24,6 +24,7 @@ extern struct at91_init_soc at91sam9rl_soc;
 extern struct at91_init_soc at91sam9x5_soc;
 extern struct at91_init_soc at91sam9n12_soc;
 extern struct at91_init_soc sama5d3_soc;
+extern struct at91_init_soc sama5d4_soc;
 
 #define AT91_SOC_START(_name)				\
 struct at91_init_soc __initdata _name##_soc		\
@@ -74,3 +75,7 @@ static inline int at91_soc_is_enabled(void)
 #if !defined(CONFIG_SOC_SAMA5D3)
 #define sama5d3_soc	at91_boot_soc
 #endif
+
+#if !defined(CONFIG_SOC_SAMA5D4)
+#define sama5d4_soc	at91_boot_soc
+#endif

arch/arm/mach-bcm/Kconfig

@@ -99,6 +99,23 @@ config ARCH_BCM_5301X
 	  different SoC or with the older BCM47XX and BCM53XX based
 	  network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
 
+config ARCH_BCM_63XX
+	bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7
+	depends on MMU
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369 if SMP
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select CACHE_L2X0
+	select HAVE_ARM_ARCH_TIMER
+	select HAVE_ARM_TWD if SMP
+	select HAVE_ARM_SCU if SMP
+	select HAVE_SMP
+	help
+	  This enables support for systems based on Broadcom DSL SoCs.
+	  It currently supports the 'BCM63XX' ARM-based family, which includes
+	  the BCM63138 variant.
+
 config ARCH_BRCMSTB
 	bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
 	depends on MMU

arch/arm/mach-bcm/Makefile

@@ -34,6 +34,9 @@ obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
 # BCM5301X
 obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
 
+# BCM63XXx
+obj-$(CONFIG_ARCH_BCM_63XX)	:= bcm63xx.o
+
 ifeq ($(CONFIG_ARCH_BRCMSTB),y)
 obj-y				+= brcmstb.o
 endif

arch/arm/mach-bcm/bcm63xx.c

+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+static const char * const bcm63xx_dt_compat[] = {
+	"brcm,bcm63138",
+	NULL
+};
+
+DT_MACHINE_START(BCM63XXX_DT, "BCM63xx DSL SoC")
+	.dt_compat	= bcm63xx_dt_compat,
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+MACHINE_END

arch/arm/mach-clps711x/board-edb7211.c

@@ -14,8 +14,9 @@
 #include <linux/types.h>
 #include <linux/i2c-gpio.h>
 #include <linux/interrupt.h>
-#include <linux/backlight.h>
 #include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
 #include <linux/memblock.h>
 
 #include <linux/mtd/physmap.h>
@@ -108,23 +109,23 @@ static struct plat_lcd_data edb7211_lcd_power_pdata = {
 	.set_power	= edb7211_lcd_power_set,
 };
 
-static void edb7211_lcd_backlight_set_intensity(int intensity)
-{
-	gpio_set_value(EDB7211_LCDBL, !!intensity);
-	clps_writel((clps_readl(PMPCON) & 0xf0ff) | (intensity << 8), PMPCON);
-}
+static struct pwm_lookup edb7211_pwm_lookup[] = {
+	PWM_LOOKUP("clps711x-pwm", 0, "pwm-backlight.0", NULL,
+		   0, PWM_POLARITY_NORMAL),
+};
 
-static struct generic_bl_info edb7211_lcd_backlight_pdata = {
-	.name			= "lcd-backlight.0",
-	.default_intensity	= 0x01,
-	.max_intensity		= 0x0f,
-	.set_bl_intensity	= edb7211_lcd_backlight_set_intensity,
+static struct platform_pwm_backlight_data pwm_bl_pdata = {
+	.dft_brightness	= 0x01,
+	.max_brightness	= 0x0f,
+	.enable_gpio	= EDB7211_LCDBL,
 };
 
+static struct resource clps711x_pwm_res =
+	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + PMPCON, SZ_4);
+
 static struct gpio edb7211_gpios[] __initconst = {
 	{ EDB7211_LCD_DC_DC_EN,	GPIOF_OUT_INIT_LOW,	"LCD DC-DC" },
 	{ EDB7211_LCDEN,	GPIOF_OUT_INIT_LOW,	"LCD POWER" },
-	{ EDB7211_LCDBL,	GPIOF_OUT_INIT_LOW,	"LCD BACKLIGHT" },
 };
 
 /* Reserve screen memory region at the start of main system memory. */
@@ -153,12 +154,18 @@ static void __init edb7211_init_late(void)
 	gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
 
 	platform_device_register(&edb7211_flash_pdev);
+
 	platform_device_register_data(NULL, "platform-lcd", 0,
 				      &edb7211_lcd_power_pdata,
 				      sizeof(edb7211_lcd_power_pdata));
-	platform_device_register_data(NULL, "generic-bl", 0,
-				      &edb7211_lcd_backlight_pdata,
-				      sizeof(edb7211_lcd_backlight_pdata));
+
+	platform_device_register_simple("clps711x-pwm", PLATFORM_DEVID_NONE,
+					&clps711x_pwm_res, 1);
+	pwm_add_table(edb7211_pwm_lookup, ARRAY_SIZE(edb7211_pwm_lookup));
+
+	platform_device_register_data(&platform_bus, "pwm-backlight", 0,
+				      &pwm_bl_pdata, sizeof(pwm_bl_pdata));
+
 	platform_device_register_simple("video-clps711x", 0, NULL, 0);
 	platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource,
 					ARRAY_SIZE(edb7211_cs8900_resource));

arch/arm/mach-clps711x/devices.c

 /*
  *  CLPS711X common devices definitions
  *
- *  Author: Alexander Shiyan <shc_work@mail.ru>, 2013
+ *  Author: Alexander Shiyan <shc_work@mail.ru>, 2013-2014
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -9,8 +9,15 @@
  * (at your option) any later version.
  */
 
+#include <linux/io.h>
+#include <linux/of_fdt.h>
 #include <linux/platform_device.h>
+#include <linux/random.h>
 #include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#include <asm/system_info.h>
 
 #include <mach/hardware.h>
 
@@ -90,10 +97,53 @@ static void __init clps711x_add_uart(void)
 					ARRAY_SIZE(clps711x_uart2_res));
 };
 
+static void __init clps711x_soc_init(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	void __iomem *base;
+	u32 id[5];
+
+	base = ioremap(CLPS711X_PHYS_BASE, SZ_32K);
+	if (!base)
+		return;
+
+	id[0] = readl(base + UNIQID);
+	id[1] = readl(base + RANDID0);
+	id[2] = readl(base + RANDID1);
+	id[3] = readl(base + RANDID2);
+	id[4] = readl(base + RANDID3);
+	system_rev = SYSFLG1_VERID(readl(base + SYSFLG1));
+
+	add_device_randomness(id, sizeof(id));
+
+	system_serial_low = id[0];
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		goto out_unmap;
+
+	soc_dev_attr->machine = of_flat_dt_get_machine_name();
+	soc_dev_attr->family = "Cirrus Logic CLPS711X";
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%u", system_rev);
+	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%08x", id[0]);
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->revision);
+		kfree(soc_dev_attr->soc_id);
+		kfree(soc_dev_attr);
+	}
+
+out_unmap:
+	iounmap(base);
+}
+
 void __init clps711x_devices_init(void)
 {
 	clps711x_add_cpuidle();
 	clps711x_add_gpio();
 	clps711x_add_syscon();
 	clps711x_add_uart();
+	clps711x_soc_init();
 }

arch/arm/mach-hisi/Kconfig

 config ARCH_HISI
 	bool "Hisilicon SoC Support"
-	depends on ARCH_MULTIPLATFORM
+	depends on ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
@@ -22,6 +22,15 @@ config ARCH_HI3xxx
 	help
 	  Support for Hisilicon Hi36xx SoC family
 
+config ARCH_HIP04
+	bool "Hisilicon HiP04 Cortex A15 family" if ARCH_MULTI_V7
+	select ARM_ERRATA_798181 if SMP
+	select HAVE_ARM_ARCH_TIMER
+	select MCPM if SMP
+	select MCPM_QUAD_CLUSTER if SMP
+	help
+	  Support for Hisilicon HiP04 SoC family
+
 config ARCH_HIX5HD2
 	bool "Hisilicon X5HD2 family" if ARCH_MULTI_V7
 	select CACHE_L2X0

arch/arm/mach-hisi/Makefile

@@ -2,5 +2,8 @@
 # Makefile for Hisilicon processors family
 #
 
+CFLAGS_platmcpm.o	:= -march=armv7-a
+
 obj-y	+= hisilicon.o
+obj-$(CONFIG_MCPM)		+= platmcpm.o
 obj-$(CONFIG_SMP)		+= platsmp.o hotplug.o headsmp.o

arch/arm/mach-hisi/hisilicon.c

@@ -63,3 +63,12 @@ static const char *hix5hd2_compat[] __initconst = {
 DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)")
 	.dt_compat	= hix5hd2_compat,
 MACHINE_END
+
+static const char *hip04_compat[] __initconst = {
+	"hisilicon,hip04-d01",
+	NULL,
+};
+
+DT_MACHINE_START(HIP04, "Hisilicon HiP04 (Flattened Device Tree)")
+	.dt_compat	= hip04_compat,
+MACHINE_END

arch/arm/mach-imx/Kconfig

@@ -69,6 +69,7 @@ config SOC_IMX1
 	select CPU_ARM920T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
+	select PINCTRL_IMX1
 
 config SOC_IMX21
 	bool
@@ -124,6 +125,13 @@ config MACH_APF9328
 	help
 	  Say Yes here if you are using the Armadeus APF9328 development board
 
+config MACH_IMX1_DT
+	bool "Support i.MX1 platforms from device tree"
+	select SOC_IMX1
+	help
+	  Include support for Freescale i.MX1 based platforms
+	  using the device tree for discovery.
+
 endif
 
 if ARCH_MULTI_V5

arch/arm/mach-imx/Makefile

@@ -16,7 +16,8 @@ obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y)
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o clk.o \
-			    clk-fixup-div.o clk-fixup-mux.o
+			    clk-fixup-div.o clk-fixup-mux.o \
+			    clk-gate-exclusive.o
 
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
@@ -43,6 +44,7 @@ endif
 # i.MX1 based machines
 obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
 obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
+obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
 
 # i.MX21 based machines
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o

arch/arm/mach-imx/anatop.c

@@ -104,6 +104,19 @@ void __init imx_init_revision_from_anatop(void)
 	case 2:
 		revision = IMX_CHIP_REVISION_1_2;
 		break;
+	case 3:
+		revision = IMX_CHIP_REVISION_1_3;
+		break;
+	case 4:
+		revision = IMX_CHIP_REVISION_1_4;
+		break;
+	case 5:
+		/*
+		 * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked
+		 * as 'D' in Part Number last character.
+		 */
+		revision = IMX_CHIP_REVISION_1_5;
+		break;
 	default:
 		revision = IMX_CHIP_REVISION_UNKNOWN;
 	}

arch/arm/mach-imx/clk-gate-exclusive.c

+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_gate_exclusive - i.MX specific gate clock which is mutually
+ * exclusive with other gate clocks
+ *
+ * @gate: the parent class
+ * @exclusive_mask: mask of gate bits which are mutually exclusive to this
+ *	gate clock
+ *
+ * The imx exclusive gate clock is a subclass of basic clk_gate
+ * with an addtional mask to indicate which other gate bits in the same
+ * register is mutually exclusive to this gate clock.
+ */
+struct clk_gate_exclusive {
+	struct clk_gate gate;
+	u32 exclusive_mask;
+};
+
+static int clk_gate_exclusive_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = container_of(hw, struct clk_gate, hw);
+	struct clk_gate_exclusive *exgate = container_of(gate,
+					struct clk_gate_exclusive, gate);
+	u32 val = readl(gate->reg);
+
+	if (val & exgate->exclusive_mask)
+		return -EBUSY;
+
+	return clk_gate_ops.enable(hw);
+}
+
+static void clk_gate_exclusive_disable(struct clk_hw *hw)
+{
+	clk_gate_ops.disable(hw);
+}
+
+static int clk_gate_exclusive_is_enabled(struct clk_hw *hw)
+{
+	return clk_gate_ops.is_enabled(hw);
+}
+
+static const struct clk_ops clk_gate_exclusive_ops = {
+	.enable = clk_gate_exclusive_enable,
+	.disable = clk_gate_exclusive_disable,
+	.is_enabled = clk_gate_exclusive_is_enabled,
+};
+
+struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
+	 void __iomem *reg, u8 shift, u32 exclusive_mask)
+{
+	struct clk_gate_exclusive *exgate;
+	struct clk_gate *gate;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	if (exclusive_mask == 0)
+		return ERR_PTR(-EINVAL);
+
+	exgate = kzalloc(sizeof(*exgate), GFP_KERNEL);
+	if (!exgate)
+		return ERR_PTR(-ENOMEM);
+	gate = &exgate->gate;
+
+	init.name = name;
+	init.ops = &clk_gate_exclusive_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = parent ? &parent : NULL;
+	init.num_parents = parent ? 1 : 0;
+
+	gate->reg = reg;
+	gate->bit_idx = shift;
+	gate->lock = &imx_ccm_lock;
+	gate->hw.init = &init;
+	exgate->exclusive_mask = exclusive_mask;
+
+	clk = clk_register(NULL, &gate->hw);
+	if (IS_ERR(clk))
+		kfree(exgate);
+
+	return clk;
+}