提交 cf1a4cf8 编写于 作者: G Gavin Shan 提交者: Benjamin Herrenschmidt

powerpc/pci: Save P2P bridge resource if possible

When PCI probe flag PCI_REASSIGN_ALL_RSRC has been passed into PCI
core, it's hoped that all resources to be reassigned by PCI core.
As to particular P2P (PCI-to-PCI) bridge, the size of the corresponding
BAR (I/O, MMIO, prefetchable MMIO) is calculated by the resources
required by the PCI devices behind the P2P bridge. That means that
the information like start/end address retrieved from the hardware
registers of the P2P bridge is meainingless in the case. However,
we still count that in and the BARs might have been configured by
firmware with non-zero size. That leads to space waste.

The patch explicitly sets the size of P2P bridge BARs to zero in
case that resource reassignment is expected with PCI probe flag
PCI_REASSIGN_ALL_RSRC. In the result, it will save overall resource
required by the system without waste.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
上级 fff34b34
...@@ -960,13 +960,14 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) ...@@ -960,13 +960,14 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
if (i >= 3 && bus->self->transparent) if (i >= 3 && bus->self->transparent)
continue; continue;
/* If we are going to re-assign everything, mark the resource /* If we're going to reassign everything, we can
* as unset and move it down to 0 * shrink the P2P resource to have size as being
* of 0 in order to save space.
*/ */
if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) { if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
res->flags |= IORESOURCE_UNSET; res->flags |= IORESOURCE_UNSET;
res->end -= res->start;
res->start = 0; res->start = 0;
res->end = -1;
continue; continue;
} }
...@@ -1228,7 +1229,14 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus) ...@@ -1228,7 +1229,14 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
pr_warning("PCI: Cannot allocate resource region " pr_warning("PCI: Cannot allocate resource region "
"%d of PCI bridge %d, will remap\n", i, bus->number); "%d of PCI bridge %d, will remap\n", i, bus->number);
clear_resource: clear_resource:
res->start = res->end = 0; /* The resource might be figured out when doing
* reassignment based on the resources required
* by the downstream PCI devices. Here we set
* the size of the resource to be 0 in order to
* save more space.
*/
res->start = 0;
res->end = -1;
res->flags = 0; res->flags = 0;
} }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册