Merge usb-linus branch into usb-next

This pulls in a bunch of fixes that are in Linus's tree because we need them
here for testing and development.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/core/hcd.c

@@ -39,6 +39,7 @@
 #include <asm/unaligned.h>
 #include <linux/platform_device.h>
 #include <linux/workqueue.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -1029,6 +1030,49 @@ static int register_root_hub(struct usb_hcd *hcd)
 	return retval;
 }
 
+/*
+ * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
+ * @bus: the bus which the root hub belongs to
+ * @portnum: the port which is being resumed
+ *
+ * HCDs should call this function when they know that a resume signal is
+ * being sent to a root-hub port.  The root hub will be prevented from
+ * going into autosuspend until usb_hcd_end_port_resume() is called.
+ *
+ * The bus's private lock must be held by the caller.
+ */
+void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
+{
+	unsigned bit = 1 << portnum;
+
+	if (!(bus->resuming_ports & bit)) {
+		bus->resuming_ports |= bit;
+		pm_runtime_get_noresume(&bus->root_hub->dev);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
+
+/*
+ * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
+ * @bus: the bus which the root hub belongs to
+ * @portnum: the port which is being resumed
+ *
+ * HCDs should call this function when they know that a resume signal has
+ * stopped being sent to a root-hub port.  The root hub will be allowed to
+ * autosuspend again.
+ *
+ * The bus's private lock must be held by the caller.
+ */
+void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
+{
+	unsigned bit = 1 << portnum;
+
+	if (bus->resuming_ports & bit) {
+		bus->resuming_ports &= ~bit;
+		pm_runtime_put_noidle(&bus->root_hub->dev);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
 
 /*-------------------------------------------------------------------------*/
 

drivers/usb/core/hub.c

@@ -2822,6 +2822,23 @@ void usb_enable_ltm(struct usb_device *udev)
 EXPORT_SYMBOL_GPL(usb_enable_ltm);
 
 #ifdef	CONFIG_USB_SUSPEND
+/*
+ * usb_disable_function_remotewakeup - disable usb3.0
+ * device's function remote wakeup
+ * @udev: target device
+ *
+ * Assume there's only one function on the USB 3.0
+ * device and disable remote wake for the first
+ * interface. FIXME if the interface association
+ * descriptor shows there's more than one function.
+ */
+static int usb_disable_function_remotewakeup(struct usb_device *udev)
+{
+	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_CLEAR_FEATURE, USB_RECIP_INTERFACE,
+				USB_INTRF_FUNC_SUSPEND,	0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+}
 
 /*
  * usb_port_suspend - suspend a usb device's upstream port
@@ -2939,12 +2956,19 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 		dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n",
 				port1, status);
 		/* paranoia:  "should not happen" */
-		if (udev->do_remote_wakeup)
-			(void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
-				USB_DEVICE_REMOTE_WAKEUP, 0,
-				NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
+		if (udev->do_remote_wakeup) {
+			if (!hub_is_superspeed(hub->hdev)) {
+				(void) usb_control_msg(udev,
+						usb_sndctrlpipe(udev, 0),
+						USB_REQ_CLEAR_FEATURE,
+						USB_RECIP_DEVICE,
+						USB_DEVICE_REMOTE_WAKEUP, 0,
+						NULL, 0,
+						USB_CTRL_SET_TIMEOUT);
+			} else
+				(void) usb_disable_function_remotewakeup(udev);
+
+		}
 
 		/* Try to enable USB2 hardware LPM again */
 		if (udev->usb2_hw_lpm_capable == 1)
@@ -3051,20 +3075,30 @@ static int finish_port_resume(struct usb_device *udev)
 	 * udev->reset_resume
 	 */
 	} else if (udev->actconfig && !udev->reset_resume) {
-		le16_to_cpus(&devstatus);
-		if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
-			status = usb_control_msg(udev,
-					usb_sndctrlpipe(udev, 0),
-					USB_REQ_CLEAR_FEATURE,
+		if (!hub_is_superspeed(udev->parent)) {
+			le16_to_cpus(&devstatus);
+			if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
+				status = usb_control_msg(udev,
+						usb_sndctrlpipe(udev, 0),
+						USB_REQ_CLEAR_FEATURE,
 						USB_RECIP_DEVICE,
-					USB_DEVICE_REMOTE_WAKEUP, 0,
-					NULL, 0,
-					USB_CTRL_SET_TIMEOUT);
-			if (status)
-				dev_dbg(&udev->dev,
-					"disable remote wakeup, status %d\n",
-					status);
+						USB_DEVICE_REMOTE_WAKEUP, 0,
+						NULL, 0,
+						USB_CTRL_SET_TIMEOUT);
+		} else {
+			status = usb_get_status(udev, USB_RECIP_INTERFACE, 0,
+					&devstatus);
+			le16_to_cpus(&devstatus);
+			if (!status && devstatus & (USB_INTRF_STAT_FUNC_RW_CAP
+					| USB_INTRF_STAT_FUNC_RW))
+				status =
+					usb_disable_function_remotewakeup(udev);
 		}
+
+		if (status)
+			dev_dbg(&udev->dev,
+				"disable remote wakeup, status %d\n",
+				status);
 		status = 0;
 	}
 	return status;

drivers/usb/host/ehci-hcd.c

@@ -797,6 +797,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 			ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
 			set_bit(i, &ehci->resuming_ports);
 			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
+			usb_hcd_start_port_resume(&hcd->self, i);
 			mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
 		}
 	}

drivers/usb/host/ehci-hub.c

@@ -649,7 +649,11 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 			status = STS_PCD;
 		}
 	}
-	/* FIXME autosuspend idle root hubs */
+
+	/* If a resume is in progress, make sure it can finish */
+	if (ehci->resuming_ports)
+		mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(25));
+
 	spin_unlock_irqrestore (&ehci->lock, flags);
 	return status ? retval : 0;
 }
@@ -851,6 +855,7 @@ static int ehci_hub_control (
 				/* resume signaling for 20 msec */
 				ehci->reset_done[wIndex] = jiffies
 						+ msecs_to_jiffies(20);
+				usb_hcd_start_port_resume(&hcd->self, wIndex);
 				/* check the port again */
 				mod_timer(&ehci_to_hcd(ehci)->rh_timer,
 						ehci->reset_done[wIndex]);
@@ -862,6 +867,7 @@ static int ehci_hub_control (
 				clear_bit(wIndex, &ehci->suspended_ports);
 				set_bit(wIndex, &ehci->port_c_suspend);
 				ehci->reset_done[wIndex] = 0;
+				usb_hcd_end_port_resume(&hcd->self, wIndex);
 
 				/* stop resume signaling */
 				temp = ehci_readl(ehci, status_reg);
@@ -950,6 +956,7 @@ static int ehci_hub_control (
 			ehci->reset_done[wIndex] = 0;
 			if (temp & PORT_PE)
 				set_bit(wIndex, &ehci->port_c_suspend);
+			usb_hcd_end_port_resume(&hcd->self, wIndex);
 		}
 
 		if (temp & PORT_OC)

drivers/usb/host/ehci-q.c

@@ -1197,17 +1197,26 @@ static void start_iaa_cycle(struct ehci_hcd *ehci, bool nested)
 	if (ehci->async_iaa || ehci->async_unlinking)
 		return;
 
-	/* Do all the waiting QHs at once */
-	ehci->async_iaa = ehci->async_unlink;
-	ehci->async_unlink = NULL;
-
 	/* If the controller isn't running, we don't have to wait for it */
 	if (unlikely(ehci->rh_state < EHCI_RH_RUNNING)) {
+
+		/* Do all the waiting QHs */
+		ehci->async_iaa = ehci->async_unlink;
+		ehci->async_unlink = NULL;
+
 		if (!nested)		/* Avoid recursion */
 			end_unlink_async(ehci);
 
 	/* Otherwise start a new IAA cycle */
 	} else if (likely(ehci->rh_state == EHCI_RH_RUNNING)) {
+		struct ehci_qh		*qh;
+
+		/* Do only the first waiting QH (nVidia bug?) */
+		qh = ehci->async_unlink;
+		ehci->async_iaa = qh;
+		ehci->async_unlink = qh->unlink_next;
+		qh->unlink_next = NULL;
+
 		/* Make sure the unlinks are all visible to the hardware */
 		wmb();
 
@@ -1255,34 +1264,35 @@ static void end_unlink_async(struct ehci_hcd *ehci)
 	}
 }
 
+static void start_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
+
 static void unlink_empty_async(struct ehci_hcd *ehci)
 {
-	struct ehci_qh		*qh, *next;
-	bool			stopped = (ehci->rh_state < EHCI_RH_RUNNING);
+	struct ehci_qh		*qh;
+	struct ehci_qh		*qh_to_unlink = NULL;
 	bool			check_unlinks_later = false;
+	int			count = 0;
 
-	/* Unlink all the async QHs that have been empty for a timer cycle */
-	next = ehci->async->qh_next.qh;
-	while (next) {
-		qh = next;
-		next = qh->qh_next.qh;
-
+	/* Find the last async QH which has been empty for a timer cycle */
+	for (qh = ehci->async->qh_next.qh; qh; qh = qh->qh_next.qh) {
 		if (list_empty(&qh->qtd_list) &&
 				qh->qh_state == QH_STATE_LINKED) {
-			if (!stopped && qh->unlink_cycle ==
-					ehci->async_unlink_cycle)
+			++count;
+			if (qh->unlink_cycle == ehci->async_unlink_cycle)
 				check_unlinks_later = true;
 			else
-				single_unlink_async(ehci, qh);
+				qh_to_unlink = qh;
 		}
 	}
 
-	/* Start a new IAA cycle if any QHs are waiting for it */
-	if (ehci->async_unlink)
-		start_iaa_cycle(ehci, false);
+	/* If nothing else is being unlinked, unlink the last empty QH */
+	if (!ehci->async_iaa && !ehci->async_unlink && qh_to_unlink) {
+		start_unlink_async(ehci, qh_to_unlink);
+		--count;
+	}
 
-	/* QHs that haven't been empty for long enough will be handled later */
-	if (check_unlinks_later) {
+	/* Other QHs will be handled later */
+	if (count > 0) {
 		ehci_enable_event(ehci, EHCI_HRTIMER_ASYNC_UNLINKS, true);
 		++ehci->async_unlink_cycle;
 	}

drivers/usb/host/ehci-sched.c

@@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask)
 }
 
 static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
 
 /* carryover low/fullspeed bandwidth that crosses uframe boundries */
 static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
@@ -2212,11 +2212,11 @@ static void scan_isoc(struct ehci_hcd *ehci)
 	}
 	ehci->now_frame = now_frame;
 
+	frame = ehci->last_iso_frame;
 	for (;;) {
 		union ehci_shadow	q, *q_p;
 		__hc32			type, *hw_p;
 
-		frame = ehci->last_iso_frame;
 restart:
 		/* scan each element in frame's queue for completions */
 		q_p = &ehci->pshadow [frame];
@@ -2321,6 +2321,9 @@ static void scan_isoc(struct ehci_hcd *ehci)
 		/* Stop when we have reached the current frame */
 		if (frame == now_frame)
 			break;
-		ehci->last_iso_frame = (frame + 1) & fmask;
+
+		/* The last frame may still have active siTDs */
+		ehci->last_iso_frame = frame;
+		frame = (frame + 1) & fmask;
 	}
 }

drivers/usb/host/ehci-timer.c

@@ -113,14 +113,15 @@ static void ehci_poll_ASS(struct ehci_hcd *ehci)
 
 	if (want != actual) {
 
-		/* Poll again later, but give up after about 20 ms */
-		if (ehci->ASS_poll_count++ < 20) {
-			ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true);
-			return;
-		}
-		ehci_dbg(ehci, "Waited too long for the async schedule status (%x/%x), giving up\n",
-				want, actual);
+		/* Poll again later */
+		ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true);
+		++ehci->ASS_poll_count;
+		return;
 	}
+
+	if (ehci->ASS_poll_count > 20)
+		ehci_dbg(ehci, "ASS poll count reached %d\n",
+				ehci->ASS_poll_count);
 	ehci->ASS_poll_count = 0;
 
 	/* The status is up-to-date; restart or stop the schedule as needed */
@@ -159,14 +160,14 @@ static void ehci_poll_PSS(struct ehci_hcd *ehci)
 
 	if (want != actual) {
 
-		/* Poll again later, but give up after about 20 ms */
-		if (ehci->PSS_poll_count++ < 20) {
-			ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true);
-			return;
-		}
-		ehci_dbg(ehci, "Waited too long for the periodic schedule status (%x/%x), giving up\n",
-				want, actual);
+		/* Poll again later */
+		ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true);
+		return;
 	}
+
+	if (ehci->PSS_poll_count > 20)
+		ehci_dbg(ehci, "PSS poll count reached %d\n",
+				ehci->PSS_poll_count);
 	ehci->PSS_poll_count = 0;
 
 	/* The status is up-to-date; restart or stop the schedule as needed */

drivers/usb/host/pci-quirks.c

@@ -780,6 +780,7 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 				"defaulting to EHCI.\n");
 		dev_warn(&xhci_pdev->dev,
 				"USB 3.0 devices will work at USB 2.0 speeds.\n");
+		usb_disable_xhci_ports(xhci_pdev);
 		return;
 	}
 

drivers/usb/host/uhci-hub.c

@@ -116,6 +116,7 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
 		}
 	}
 	clear_bit(port, &uhci->resuming_ports);
+	usb_hcd_end_port_resume(&uhci_to_hcd(uhci)->self, port);
 }
 
 /* Wait for the UHCI controller in HP's iLO2 server management chip.
@@ -167,6 +168,8 @@ static void uhci_check_ports(struct uhci_hcd *uhci)
 				set_bit(port, &uhci->resuming_ports);
 				uhci->ports_timeout = jiffies +
 						msecs_to_jiffies(25);
+				usb_hcd_start_port_resume(
+						&uhci_to_hcd(uhci)->self, port);
 
 				/* Make sure we see the port again
 				 * after the resuming period is over. */

drivers/usb/host/xhci-ring.c

@@ -1698,7 +1698,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 				faked_port_index + 1);
 		if (slot_id && xhci->devs[slot_id])
 			xhci_ring_device(xhci, slot_id);
-		if (bus_state->port_remote_wakeup && (1 << faked_port_index)) {
+		if (bus_state->port_remote_wakeup & (1 << faked_port_index)) {
 			bus_state->port_remote_wakeup &=
 				~(1 << faked_port_index);
 			xhci_test_and_clear_bit(xhci, port_array,
@@ -2589,6 +2589,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 				(trb_comp_code != COMP_STALL &&
 					trb_comp_code != COMP_BABBLE))
 				xhci_urb_free_priv(xhci, urb_priv);
+			else
+				kfree(urb_priv);
 
 			usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
 			if ((urb->actual_length != urb->transfer_buffer_length &&
@@ -3106,7 +3108,7 @@ static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len,
 	 * running_total.
 	 */
 	packets_transferred = (running_total + trb_buff_len) /
-		usb_endpoint_maxp(&urb->ep->desc);
+		GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
 
 	if ((total_packet_count - packets_transferred) > 31)
 		return 31 << 17;
@@ -3640,7 +3642,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		td_len = urb->iso_frame_desc[i].length;
 		td_remain_len = td_len;
 		total_packet_count = DIV_ROUND_UP(td_len,
-				usb_endpoint_maxp(&urb->ep->desc));
+				GET_MAX_PACKET(
+					usb_endpoint_maxp(&urb->ep->desc)));
 		/* A zero-length transfer still involves at least one packet. */
 		if (total_packet_count == 0)
 			total_packet_count++;
@@ -3662,9 +3665,11 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		td = urb_priv->td[i];
 		for (j = 0; j < trbs_per_td; j++) {
 			u32 remainder = 0;
-			field = TRB_TBC(burst_count) | TRB_TLBPC(residue);
+			field = 0;
 
 			if (first_trb) {
+				field = TRB_TBC(burst_count) |
+					TRB_TLBPC(residue);
 				/* Queue the isoc TRB */
 				field |= TRB_TYPE(TRB_ISOC);
 				/* Assume URB_ISO_ASAP is set */

drivers/usb/serial/cp210x.c

@@ -60,6 +60,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
 	{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
 	{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
+	{ USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
 	{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
 	{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
 	{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */

drivers/usb/serial/ftdi_sio.c

@@ -584,6 +584,7 @@ static struct usb_device_id id_table_combined [] = {
 	/*
 	 * ELV devices:
 	 */
+	{ USB_DEVICE(FTDI_ELV_VID, FTDI_ELV_WS300_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
@@ -670,6 +671,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },

drivers/usb/serial/ftdi_sio_ids.h

@@ -147,6 +147,11 @@
 #define XSENS_CONVERTER_6_PID	0xD38E
 #define XSENS_CONVERTER_7_PID	0xD38F
 
+/**
+ * Zolix (www.zolix.com.cb) product ids
+ */
+#define FTDI_OMNI1509			0xD491	/* Omni1509 embedded USB-serial */
+
 /*
  * NDI (www.ndigital.com) product ids
  */
@@ -204,7 +209,7 @@
 
 /*
  * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
- * All of these devices use FTDI's vendor ID (0x0403).
+ * Almost all of these devices use FTDI's vendor ID (0x0403).
  * Further IDs taken from ELV Windows .inf file.
  *
  * The previously included PID for the UO 100 module was incorrect.
@@ -212,6 +217,8 @@
  *
  * Armin Laeuger originally sent the PID for the UM 100 module.
  */
+#define FTDI_ELV_VID	0x1B1F	/* ELV AG */
+#define FTDI_ELV_WS300_PID	0xC006	/* eQ3 WS 300 PC II */
 #define FTDI_ELV_USR_PID	0xE000	/* ELV Universal-Sound-Recorder */
 #define FTDI_ELV_MSM1_PID	0xE001	/* ELV Mini-Sound-Modul */
 #define FTDI_ELV_KL100_PID	0xE002	/* ELV Kfz-Leistungsmesser KL 100 */

drivers/usb/serial/option.c

@@ -242,6 +242,7 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_CC864_DUAL		0x1005
 #define TELIT_PRODUCT_CC864_SINGLE		0x1006
 #define TELIT_PRODUCT_DE910_DUAL		0x1010
+#define TELIT_PRODUCT_LE920			0x1200
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
@@ -453,6 +454,10 @@ static void option_instat_callback(struct urb *urb);
 #define TPLINK_VENDOR_ID			0x2357
 #define TPLINK_PRODUCT_MA180			0x0201
 
+/* Changhong products */
+#define CHANGHONG_VENDOR_ID			0x2077
+#define CHANGHONG_PRODUCT_CH690			0x7001
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -535,6 +540,11 @@ static const struct option_blacklist_info zte_1255_blacklist = {
 	.reserved = BIT(3) | BIT(4),
 };
 
+static const struct option_blacklist_info telit_le920_blacklist = {
+	.sendsetup = BIT(0),
+	.reserved = BIT(1) | BIT(5),
+};
+
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -785,6 +795,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
+		.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
@@ -1326,6 +1338,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
 	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

drivers/usb/serial/qcserial.c

@@ -53,6 +53,7 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_G1K(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
 	{DEVICE_G1K(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
 	{DEVICE_G1K(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
+	{DEVICE_G1K(0x1bc7, 0x900e)},	/* Telit Gobi QDL device */
 
 	/* Gobi 2000 devices */
 	{USB_DEVICE(0x1410, 0xa010)},	/* Novatel Gobi 2000 QDL device */

drivers/usb/storage/initializers.c

@@ -92,8 +92,8 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
 	return 0;
 }
 
-/* This places the HUAWEI E220 devices in multi-port mode */
-int usb_stor_huawei_e220_init(struct us_data *us)
+/* This places the HUAWEI usb dongles in multi-port mode */
+static int usb_stor_huawei_feature_init(struct us_data *us)
 {
 	int result;
 
@@ -104,3 +104,75 @@ int usb_stor_huawei_e220_init(struct us_data *us)
 	US_DEBUGP("Huawei mode set result is %d\n", result);
 	return 0;
 }
+
+/*
+ * It will send a scsi switch command called rewind' to huawei dongle.
+ * When the dongle receives this command at the first time,
+ * it will reboot immediately. After rebooted, it will ignore this command.
+ * So it is  unnecessary to read its response.
+ */
+static int usb_stor_huawei_scsi_init(struct us_data *us)
+{
+	int result = 0;
+	int act_len = 0;
+	struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
+	char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
+			0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+	bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcbw->Tag = 0;
+	bcbw->DataTransferLength = 0;
+	bcbw->Flags = bcbw->Lun = 0;
+	bcbw->Length = sizeof(rewind_cmd);
+	memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
+	memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
+
+	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
+					US_BULK_CB_WRAP_LEN, &act_len);
+	US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
+	return result;
+}
+
+/*
+ * It tries to find the supported Huawei USB dongles.
+ * In Huawei, they assign the following product IDs
+ * for all of their mobile broadband dongles,
+ * including the new dongles in the future.
+ * So if the product ID is not included in this list,
+ * it means it is not Huawei's mobile broadband dongles.
+ */
+static int usb_stor_huawei_dongles_pid(struct us_data *us)
+{
+	struct usb_interface_descriptor *idesc;
+	int idProduct;
+
+	idesc = &us->pusb_intf->cur_altsetting->desc;
+	idProduct = us->pusb_dev->descriptor.idProduct;
+	/* The first port is CDROM,
+	 * means the dongle in the single port mode,
+	 * and a switch command is required to be sent. */
+	if (idesc && idesc->bInterfaceNumber == 0) {
+		if ((idProduct == 0x1001)
+			|| (idProduct == 0x1003)
+			|| (idProduct == 0x1004)
+			|| (idProduct >= 0x1401 && idProduct <= 0x1500)
+			|| (idProduct >= 0x1505 && idProduct <= 0x1600)
+			|| (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+int usb_stor_huawei_init(struct us_data *us)
+{
+	int result = 0;
+
+	if (usb_stor_huawei_dongles_pid(us)) {
+		if (us->pusb_dev->descriptor.idProduct >= 0x1446)
+			result = usb_stor_huawei_scsi_init(us);
+		else
+			result = usb_stor_huawei_feature_init(us);
+	}
+	return result;
+}

drivers/usb/storage/initializers.h

@@ -46,5 +46,5 @@ int usb_stor_euscsi_init(struct us_data *us);
  * flash reader */
 int usb_stor_ucr61s2b_init(struct us_data *us);
 
-/* This places the HUAWEI E220 devices in multi-port mode */
-int usb_stor_huawei_e220_init(struct us_data *us);
+/* This places the HUAWEI usb dongles in multi-port mode */
+int usb_stor_huawei_init(struct us_data *us);

drivers/usb/storage/unusual_devs.h

@@ -1527,335 +1527,10 @@ UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
 /* Reported by fangxiaozhi <huananhu@huawei.com>
  * This brings the HUAWEI data card devices into multi-port mode
  */
-UNUSUAL_DEV(  0x12d1, 0x1001, 0x0000, 0x0000,
+UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1003, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1004, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1401, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1402, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1403, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1404, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1405, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1406, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1407, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1408, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1409, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x140A, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x140B, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x140C, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x140D, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x140E, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x140F, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1410, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1411, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1412, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1413, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1414, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1415, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1416, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1417, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1418, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1419, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x141A, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x141B, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x141C, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x141D, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x141E, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x141F, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1420, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1421, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1422, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1423, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1424, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1425, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1426, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1427, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1428, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1429, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x142A, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x142B, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x142C, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x142D, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x142E, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x142F, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1430, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1431, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1432, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1433, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1434, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1435, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1436, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1437, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1438, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x1439, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x143A, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x143B, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x143C, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x143D, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x143E, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
-		0),
-UNUSUAL_DEV(  0x12d1, 0x143F, 0x0000, 0x0000,
-		"HUAWEI MOBILE",
-		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
 		0),
 
 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */

drivers/usb/storage/usb.c

@@ -120,6 +120,17 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
 	.useTransport = use_transport,	\
 }
 
+#define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \
+		vendor_name, product_name, use_protocol, use_transport, \
+		init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
 static struct us_unusual_dev us_unusual_dev_list[] = {
 #	include "unusual_devs.h"
 	{ }		/* Terminating entry */
@@ -131,6 +142,7 @@ static struct us_unusual_dev for_dynamic_ids =
 #undef UNUSUAL_DEV
 #undef COMPLIANT_DEV
 #undef USUAL_DEV
+#undef UNUSUAL_VENDOR_INTF
 
 #ifdef CONFIG_LOCKDEP
 

drivers/usb/storage/usual-tables.c

@@ -41,6 +41,20 @@
 #define USUAL_DEV(useProto, useTrans) \
 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans) }
 
+/* Define the device is matched with Vendor ID and interface descriptors */
+#define UNUSUAL_VENDOR_INTF(id_vendor, cl, sc, pr, \
+			vendorName, productName, useProtocol, useTransport, \
+			initFunction, flags) \
+{ \
+	.match_flags = USB_DEVICE_ID_MATCH_INT_INFO \
+				| USB_DEVICE_ID_MATCH_VENDOR, \
+	.idVendor    = (id_vendor), \
+	.bInterfaceClass = (cl), \
+	.bInterfaceSubClass = (sc), \
+	.bInterfaceProtocol = (pr), \
+	.driver_info = (flags) \
+}
+
 struct usb_device_id usb_storage_usb_ids[] = {
 #	include "unusual_devs.h"
 	{ }		/* Terminating entry */
@@ -50,6 +64,7 @@ MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids);
 #undef UNUSUAL_DEV
 #undef COMPLIANT_DEV
 #undef USUAL_DEV
+#undef UNUSUAL_VENDOR_INTF
 
 /*
  * The table of devices to ignore

include/linux/usb.h

@@ -357,6 +357,8 @@ struct usb_bus {
 	int bandwidth_int_reqs;		/* number of Interrupt requests */
 	int bandwidth_isoc_reqs;	/* number of Isoc. requests */
 
+	unsigned resuming_ports;	/* bit array: resuming root-hub ports */
+
 #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
 	struct mon_bus *mon_bus;	/* non-null when associated */
 	int monitored;			/* non-zero when monitored */

include/linux/usb/hcd.h

@@ -430,6 +430,9 @@ extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
 extern void usb_wakeup_notification(struct usb_device *hdev,
 		unsigned int portnum);
 
+extern void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum);
+extern void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum);
+
 /* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
 #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
 #define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))

include/uapi/linux/usb/ch9.h

@@ -152,6 +152,12 @@
 #define USB_INTRF_FUNC_SUSPEND_LP	(1 << (8 + 0))
 #define USB_INTRF_FUNC_SUSPEND_RW	(1 << (8 + 1))
 
+/*
+ * Interface status, Figure 9-5 USB 3.0 spec
+ */
+#define USB_INTRF_STAT_FUNC_RW_CAP     1
+#define USB_INTRF_STAT_FUNC_RW         2
+
 #define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
 
 /* Bit array elements as returned by the USB_REQ_GET_STATUS request. */