提交 cea6b942 编写于 作者: S Shweta Gulati 提交者: Kevin Hilman

ARM: OMAP3+: SmartReflex: use voltage domain name in device attributes

To set sr ntarget values for all volt_domain,
volt_table is retrieved by doing a look_up of 'vdd_name'
field from omap_hwmod but voltage domain pointer does not
belong to omap_hwmod and is not used anywhere else.
As a part of voltage layer and SR Layer clean up volt
pointer is removed from omap_hwmod and added in dev
attributes of SR. The value of the field must match
the voltage domain names for the binding to be effective.

Tested on OMAP3630 SDP, OMAP3530 Beagleboard and
OMAP4430 SDP Board.
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NShweta Gulati <shweta.gulati@ti.com>
Acked by: Nishanth Menon <nm@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: NJean Pihet <j-pihet@ti.com>
Reviewed-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NKevin Hilman <khilman@ti.com>
上级 149f1d5c
......@@ -29,6 +29,7 @@
#include "omap_hwmod_common_data.h"
#include "smartreflex.h"
#include "prm-regbits-34xx.h"
#include "cm-regbits-34xx.h"
#include "wd_timer.h"
......@@ -2664,6 +2665,10 @@ static struct omap_hwmod_class omap36xx_smartreflex_hwmod_class = {
};
/* SR1 */
static struct omap_smartreflex_dev_attr sr1_dev_attr = {
.sensor_voltdm_name = "mpu_iva",
};
static struct omap_hwmod_ocp_if *omap3_sr1_slaves[] = {
&omap3_l4_core__sr1,
};
......@@ -2672,7 +2677,6 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
.name = "sr1_hwmod",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
.vdd_name = "mpu_iva",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
......@@ -2684,6 +2688,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
.dev_attr = &sr1_dev_attr,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
......@@ -2691,7 +2696,6 @@ static struct omap_hwmod omap36xx_sr1_hwmod = {
.name = "sr1_hwmod",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
.vdd_name = "mpu_iva",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
......@@ -2703,9 +2707,14 @@ static struct omap_hwmod omap36xx_sr1_hwmod = {
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
.dev_attr = &sr1_dev_attr,
};
/* SR2 */
static struct omap_smartreflex_dev_attr sr2_dev_attr = {
.sensor_voltdm_name = "core",
};
static struct omap_hwmod_ocp_if *omap3_sr2_slaves[] = {
&omap3_l4_core__sr2,
};
......@@ -2714,7 +2723,6 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
.name = "sr2_hwmod",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr2_fck",
.vdd_name = "core",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
......@@ -2726,6 +2734,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
.dev_attr = &sr2_dev_attr,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
......@@ -2733,7 +2742,6 @@ static struct omap_hwmod omap36xx_sr2_hwmod = {
.name = "sr2_hwmod",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr2_fck",
.vdd_name = "core",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
......@@ -2745,6 +2753,7 @@ static struct omap_hwmod omap36xx_sr2_hwmod = {
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
.dev_attr = &sr2_dev_attr,
};
/*
......
......@@ -34,6 +34,7 @@
#include "omap_hwmod_common_data.h"
#include "smartreflex.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "prm44xx.h"
......@@ -3963,6 +3964,10 @@ static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = {
};
/* smartreflex_core */
static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = {
.sensor_voltdm_name = "core",
};
static struct omap_hwmod omap44xx_smartreflex_core_hwmod;
static struct omap_hwmod_irq_info omap44xx_smartreflex_core_irqs[] = {
{ .irq = 19 + OMAP44XX_IRQ_GIC_START },
......@@ -3999,7 +4004,6 @@ static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
.mpu_irqs = omap44xx_smartreflex_core_irqs,
.main_clk = "smartreflex_core_fck",
.vdd_name = "core",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET,
......@@ -4009,9 +4013,14 @@ static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
},
.slaves = omap44xx_smartreflex_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
.dev_attr = &smartreflex_core_dev_attr,
};
/* smartreflex_iva */
static struct omap_smartreflex_dev_attr smartreflex_iva_dev_attr = {
.sensor_voltdm_name = "iva",
};
static struct omap_hwmod omap44xx_smartreflex_iva_hwmod;
static struct omap_hwmod_irq_info omap44xx_smartreflex_iva_irqs[] = {
{ .irq = 102 + OMAP44XX_IRQ_GIC_START },
......@@ -4047,7 +4056,6 @@ static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
.clkdm_name = "l4_ao_clkdm",
.mpu_irqs = omap44xx_smartreflex_iva_irqs,
.main_clk = "smartreflex_iva_fck",
.vdd_name = "iva",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET,
......@@ -4057,9 +4065,14 @@ static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
},
.slaves = omap44xx_smartreflex_iva_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
.dev_attr = &smartreflex_iva_dev_attr,
};
/* smartreflex_mpu */
static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = {
.sensor_voltdm_name = "mpu",
};
static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod;
static struct omap_hwmod_irq_info omap44xx_smartreflex_mpu_irqs[] = {
{ .irq = 18 + OMAP44XX_IRQ_GIC_START },
......@@ -4095,7 +4108,6 @@ static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
.clkdm_name = "l4_ao_clkdm",
.mpu_irqs = omap44xx_smartreflex_mpu_irqs,
.main_clk = "smartreflex_mpu_fck",
.vdd_name = "mpu",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET,
......@@ -4105,6 +4117,7 @@ static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
},
.slaves = omap44xx_smartreflex_mpu_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
.dev_attr = &smartreflex_mpu_dev_attr,
};
/*
......
......@@ -152,6 +152,15 @@ struct omap_sr_pmic_data {
void (*sr_pmic_init) (void);
};
/**
* struct omap_smartreflex_dev_attr - Smartreflex Device attribute.
*
* @sensor_voltdm_name: Name of voltdomain of SR instance
*/
struct omap_smartreflex_dev_attr {
const char *sensor_voltdm_name;
};
#ifdef CONFIG_OMAP_SMARTREFLEX
/*
* The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
......
......@@ -74,6 +74,7 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
struct omap_sr_data *sr_data;
struct platform_device *pdev;
struct omap_volt_data *volt_data;
struct omap_smartreflex_dev_attr *sr_dev_attr;
char *name = "smartreflex";
static int i;
......@@ -84,9 +85,11 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
return -ENOMEM;
}
if (!oh->vdd_name) {
sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
pr_err("%s: No voltage domain specified for %s."
"Cannot initialize\n", __func__, oh->name);
"Cannot initialize\n", __func__,
oh->name);
goto exit;
}
......@@ -94,10 +97,10 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
sr_data->senn_mod = 0x1;
sr_data->senp_mod = 0x1;
sr_data->voltdm = voltdm_lookup(oh->vdd_name);
sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
if (IS_ERR(sr_data->voltdm)) {
pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
__func__, oh->vdd_name);
__func__, sr_dev_attr->sensor_voltdm_name);
goto exit;
}
......
......@@ -484,7 +484,6 @@ struct omap_hwmod_class {
* @main_clk: main clock: OMAP clock name
* @_clk: pointer to the main struct clk (filled in at runtime)
* @opt_clks: other device clocks that drivers can request (0..*)
* @vdd_name: voltage domain name
* @voltdm: pointer to voltage domain (filled in at runtime)
* @masters: ptr to array of OCP ifs that this hwmod can initiate on
* @slaves: ptr to array of OCP ifs that this hwmod can respond on
......@@ -528,7 +527,6 @@ struct omap_hwmod {
struct omap_hwmod_opt_clk *opt_clks;
char *clkdm_name;
struct clockdomain *clkdm;
char *vdd_name;
struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
void *dev_attr;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册