arc: delete __cpuinit usage from all arc files

The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/arc uses of the __cpuinit macros from
all C files.  Currently arc does not have any __CPUINIT used in
assembly files.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

arch/arc/include/asm/irq.h

@@ -21,6 +21,6 @@
 extern void __init arc_init_IRQ(void);
 extern int __init get_hw_config_num_irq(void);
 
-void __cpuinit arc_local_timer_setup(unsigned int cpu);
+void arc_local_timer_setup(unsigned int cpu);
 
 #endif

arch/arc/kernel/irq.c

@@ -28,7 +28,7 @@
  * -Disable all IRQs (on CPU side)
  * -Optionally, setup the High priority Interrupts as Level 2 IRQs
  */
-void __cpuinit arc_init_IRQ(void)
+void arc_init_IRQ(void)
 {
 	int level_mask = 0;
 

arch/arc/kernel/setup.c

@@ -31,14 +31,14 @@
 int running_on_hw = 1;	/* vs. on ISS */
 
 char __initdata command_line[COMMAND_LINE_SIZE];
-struct machine_desc *machine_desc __cpuinitdata;
+struct machine_desc *machine_desc;
 
 struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
 struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
 
 
-void __cpuinit read_arc_build_cfg_regs(void)
+void read_arc_build_cfg_regs(void)
 {
 	struct bcr_perip uncached_space;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@@ -237,7 +237,7 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 	return buf;
 }
 
-void __cpuinit arc_chk_ccms(void)
+void arc_chk_ccms(void)
 {
 #if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM)
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@@ -272,7 +272,7 @@ void __cpuinit arc_chk_ccms(void)
  * hardware has dedicated regs which need to be saved/restored on ctx-sw
  * (Single Precision uses core regs), thus kernel is kind of oblivious to it
  */
-void __cpuinit arc_chk_fpu(void)
+void arc_chk_fpu(void)
 {
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 
@@ -293,7 +293,7 @@ void __cpuinit arc_chk_fpu(void)
  *    such as only for boot CPU etc
  */
 
-void __cpuinit setup_processor(void)
+void setup_processor(void)
 {
 	char str[512];
 	int cpu_id = smp_processor_id();

arch/arc/kernel/smp.c

@@ -117,7 +117,7 @@ const char *arc_platform_smp_cpuinfo(void)
  * Called from asm stub in head.S
  * "current"/R25 already setup by low level boot code
  */
-void __cpuinit start_kernel_secondary(void)
+void start_kernel_secondary(void)
 {
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu = smp_processor_id();
@@ -154,7 +154,7 @@ void __cpuinit start_kernel_secondary(void)
  *
  * Essential requirements being where to run from (PC) and stack (SP)
 */
-int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
+int __cpu_up(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long wait_till;
 

arch/arc/kernel/time.c

@@ -61,7 +61,7 @@
 
 #ifdef CONFIG_ARC_HAS_RTSC
 
-int __cpuinit arc_counter_setup(void)
+int arc_counter_setup(void)
 {
 	/* RTSC insn taps into cpu clk, needs no setup */
 
@@ -116,7 +116,7 @@ static bool is_usable_as_clocksource(void)
 /*
  * set 32bit TIMER1 to keep counting monotonically and wraparound
  */
-int __cpuinit arc_counter_setup(void)
+int arc_counter_setup(void)
 {
 	write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
 	write_aux_reg(ARC_REG_TIMER1_CNT, 0);
@@ -223,7 +223,7 @@ static struct irqaction arc_timer_irq = {
  * Setup the local event timer for @cpu
  * N.B. weak so that some exotic ARC SoCs can completely override it
  */
-void __attribute__((weak)) __cpuinit arc_local_timer_setup(unsigned int cpu)
+void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu)
 {
 	struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);
 

arch/arc/mm/cache_arc700.c

@@ -129,7 +129,7 @@ char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
  * the cpuinfo structure for later use.
  * No Validation done here, simply read/convert the BCRs
  */
-void __cpuinit read_decode_cache_bcr(void)
+void read_decode_cache_bcr(void)
 {
 	struct cpuinfo_arc_cache *p_ic, *p_dc;
 	unsigned int cpu = smp_processor_id();
@@ -167,7 +167,7 @@ void __cpuinit read_decode_cache_bcr(void)
  * 3. Enable the Caches, setup default flush mode for D-Cache
  * 3. Calculate the SHMLBA used by user space
  */
-void __cpuinit arc_cache_init(void)
+void arc_cache_init(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;

arch/arc/mm/tlb.c

@@ -469,7 +469,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
  * the cpuinfo structure for later use.
  * No Validation is done here, simply read/convert the BCRs
  */
-void __cpuinit read_decode_mmu_bcr(void)
+void read_decode_mmu_bcr(void)
 {
 	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
 	unsigned int tmp;
@@ -530,7 +530,7 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
 	return buf;
 }
 
-void __cpuinit arc_mmu_init(void)
+void arc_mmu_init(void)
 {
 	char str[256];
 	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;