unicore32 machine related: add frame buffer driver for pkunity-v3 soc

change from original version -- by advice of Paul Mundt
1. remove videomemorysize definitions
2. remove unifb_enable and unifb_setup
3. use dev_warn instead of printk in fb driver
4. remove judgement for FB_ACCEL_PUV3_UNIGFX
5. adjust clk_get and clk_set_rate calls
6. add resources definitions
7. remove unifb_option
8. adjust register for platform_device
9. adjust unifb_ops position and unifb_regs assignment position
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: NArnd Bergmann <arnd@arndb.de>

MAINTAINERS

@@ -4902,6 +4902,7 @@ S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32.git
 F:	drivers/input/serio/i8042-unicore32io.h
 F:	drivers/i2c/busses/i2c-puv3.c
+F:	drivers/video/fb-puv3.c
 
 PMC SIERRA MaxRAID DRIVER
 M:	Anil Ravindranath <anil_ravindranath@pmc-sierra.com>

arch/unicore32/configs/debug_defconfig

@@ -66,7 +66,6 @@ CONFIG_LCD_BACKLIGHT=n
 
 CONFIG_PUV3_RTC=y
 CONFIG_PUV3_UMAL=y
-CONFIG_PUV3_UNIGFX=y
 CONFIG_PUV3_MUSB=n
 CONFIG_PUV3_AC97=n
 CONFIG_PUV3_NAND=n
@@ -130,6 +129,8 @@ CONFIG_VIDEO_DEV=n
 CONFIG_USB_VIDEO_CLASS=n
 
 #	Graphics support
+CONFIG_FB=y
+CONFIG_FB_PUV3_UNIGFX=y
 #	Console display driver support
 CONFIG_VGA_CONSOLE=n
 CONFIG_FRAMEBUFFER_CONSOLE=y

arch/unicore32/include/mach/memory.h

@@ -50,7 +50,7 @@ void puv3_pci_adjust_zones(unsigned long *size, unsigned long *holes);
 
 /* kuser area */
 #define KUSER_VECPAGE_BASE	(KUSER_BASE + UL(0x3fff0000))
-#define KUSER_UNIGFX_BASE	(KUSER_BASE + PKUNITY_UNIGFX_MMAP_BASE)
+#define KUSER_UNIGFX_BASE	(PAGE_OFFSET + PKUNITY_UNIGFX_MMAP_BASE)
 /* kuser_vecpage (0xbfff0000) is ro, and vectors page (0xffff0000) is rw */
 #define kuser_vecpage_to_vectors(x)	((x) - (KUSER_VECPAGE_BASE)	\
 					+ (VECTORS_BASE))

arch/unicore32/kernel/puv3-core.c

@@ -93,6 +93,19 @@ static struct resource puv3_mmc_resources[] = {
 	},
 };
 
+static struct resource puv3_unigfx_resources[] = {
+	[0] = {
+		.start	= PKUNITY_UNIGFX_BASE,
+		.end	= PKUNITY_UNIGFX_BASE + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PKUNITY_UNIGFX_MMAP_BASE,
+		.end	= PKUNITY_UNIGFX_MMAP_BASE + PKUNITY_UNIGFX_MMAP_SIZE,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
 static struct resource puv3_rtc_resources[] = {
 	[0] = {
 		.start = PKUNITY_RTC_BASE,
@@ -256,6 +269,8 @@ void __init puv3_core_init(void)
 			puv3_umal_resources, ARRAY_SIZE(puv3_umal_resources));
 	platform_device_register_simple("PKUnity-v3-MMC", -1,
 			puv3_mmc_resources, ARRAY_SIZE(puv3_mmc_resources));
+	platform_device_register_simple("PKUnity-v3-UNIGFX", -1,
+			puv3_unigfx_resources, ARRAY_SIZE(puv3_unigfx_resources));
 	platform_device_register_simple("PKUnity-v3-PWM", -1,
 			puv3_pwm_resources, ARRAY_SIZE(puv3_pwm_resources));
 	platform_device_register_simple("PKUnity-v3-UART", 0,

drivers/video/Kconfig

@@ -2365,6 +2365,17 @@ config FB_JZ4740
 	help
 	  Framebuffer support for the JZ4740 SoC.
 
+config FB_PUV3_UNIGFX
+	tristate "PKUnity v3 Unigfx framebuffer support"
+	depends on FB && UNICORE32 && ARCH_PUV3
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	help
+	  Choose this option if you want to use the Unigfx device as a
+	  framebuffer device. Without the support of PCI & AGP.
+
 source "drivers/video/omap/Kconfig"
 source "drivers/video/omap2/Kconfig"
 

drivers/video/Makefile

@@ -139,6 +139,7 @@ obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
 obj-$(CONFIG_FB_MSM)              += msm/
 obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
 obj-$(CONFIG_FB_JZ4740)		  += jz4740_fb.o
+obj-$(CONFIG_FB_PUV3_UNIGFX)      += fb-puv3.o
 
 # Platform or fallback drivers go here
 obj-$(CONFIG_FB_UVESA)            += uvesafb.o

include/linux/fb.h

@@ -152,6 +152,8 @@
 #define FB_ACCEL_PROSAVAGE_DDR  0x8d	/* S3 ProSavage DDR             */
 #define FB_ACCEL_PROSAVAGE_DDRK 0x8e	/* S3 ProSavage DDR-K           */
 
+#define FB_ACCEL_PUV3_UNIGFX	0xa0	/* PKUnity-v3 Unigfx		*/
+
 struct fb_fix_screeninfo {
 	char id[16];			/* identification string eg "TT Builtin" */
 	unsigned long smem_start;	/* Start of frame buffer mem */