提交 cd6f5545 编写于 作者: V Viresh Kumar 提交者: Krzysztof Kozlowski

ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes

The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.

Remove the unused properties from the CPU nodes.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
上级 bd010d60
......@@ -48,8 +48,6 @@
400000 975000
200000 950000
>;
cooling-min-level = <4>;
cooling-max-level = <2>;
#cooling-cells = <2>; /* min followed by max */
};
......
......@@ -42,8 +42,6 @@
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
};
......
......@@ -77,8 +77,6 @@
300000 937500
200000 925000
>;
cooling-min-level = <15>;
cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@1 {
......
......@@ -30,8 +30,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
......@@ -43,8 +41,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
......@@ -56,8 +52,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
......@@ -69,8 +63,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
......@@ -83,8 +75,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
......@@ -96,8 +86,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
......@@ -109,8 +97,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
......@@ -122,8 +108,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
......
......@@ -29,8 +29,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
......@@ -42,8 +40,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
......@@ -55,8 +51,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
......@@ -68,8 +62,6 @@
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <11>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <539>;
};
......@@ -82,8 +74,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
......@@ -95,8 +85,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
......@@ -108,8 +96,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
......@@ -121,8 +107,6 @@
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
cooling-min-level = <0>;
cooling-max-level = <15>;
#cooling-cells = <2>; /* min followed by max */
capacity-dmips-mhz = <1024>;
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册